I am getting error 5616 error code while installing with MDT

Question

I am getting error 5616 error code while installing with MDT

杨杨涂 1

My machine has three hard disks. Whenever I plug in the three fast hard disks at the same time when installing the machine, an error of 5616 will appear, but if I only have one disk, the error will not be reported. I have specified the disk number in the MDT to install the system. I don't know why this error is reported. My log is attached below.255874-bdd.log

Simon Ren-MSFT 17,366 Reputation points Microsoft Vendor

2022-11-01T10:12:09.673+00:00

Hi,

1,Similar threads for your reference. You could try the resolutions to select correct disk.

MDT ADK1809 - FAILURE ( 5616 ): 15250: Verify BCDBootEx
MDT failure 5616: 1: Verify BCDBootEx

2,If we are using Windows 10 ADK version 2004 OR Windows 11 AKD with MDT build 8456, we have to download MDT_KB4564442.exe and the Microsoft.BDD.Utility.dll file follow below guidance, remember to update Deployment Share, choose completely regenerate the boot images.

Windows 10 deployments fail with Microsoft Deployment Toolkit on computers with BIOS type firmware

Hope it helps. Thanks for your time.

Best regards,
Simon

If the response is helpful, please click "Accept Answer" and upvote it.
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.
杨杨涂 1 Reputation point

2022-11-01T10:16:57.237+00:00

Thank you for your answer, my adk is win11 and I tried to change the configuration accessories and still get an error. For the query mentioned above, I want to know how to configure it
Simon Ren-MSFT 17,366 Reputation points Microsoft Vendor

2022-11-02T08:31:54.5+00:00

Hi,

Thanks for your reply.

The WMI query is configured in the Option page on your Task Sequencer>Preinstall>NewComputerOnly>Format and Partition(UEFI). Then click Add and select Query WMI. As shown below in my lab (you should customize the query accordingly):

Thanks for your time. Have a nice day!

Best regards,
Simon
杨杨涂 1 Reputation point

2022-11-03T14:10:50.14+00:00

I have done this, but it still doesn't work. My disk 1 belongs to SSD500G. I want to set the query to only be installed on this SSD and the size is less than 500g.
Simon Ren-MSFT 17,366 Reputation points Microsoft Vendor

2022-11-08T09:40:19.063+00:00

Hi,

You can use the WMI query like this:
select * from Win32_DiskDriver WHERE SIZE < 524288000

Refer to: Custom partition hard disk sizes with MDT

Best regards,
Simon

Simon Ren-MSFT 17,366 Reputation points Microsoft Vendor

2022-11-01T10:12:09.673+00:00

Hi,

1,Similar threads for your reference. You could try the resolutions to select correct disk.

MDT ADK1809 - FAILURE ( 5616 ): 15250: Verify BCDBootEx
MDT failure 5616: 1: Verify BCDBootEx

2,If we are using Windows 10 ADK version 2004 OR Windows 11 AKD with MDT build 8456, we have to download MDT_KB4564442.exe and the Microsoft.BDD.Utility.dll file follow below guidance, remember to update Deployment Share, choose completely regenerate the boot images.

Windows 10 deployments fail with Microsoft Deployment Toolkit on computers with BIOS type firmware

Hope it helps. Thanks for your time.

Best regards,
Simon

If the response is helpful, please click "Accept Answer" and upvote it.
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.
杨杨涂 1 Reputation point

2022-11-01T10:16:57.237+00:00

Thank you for your answer, my adk is win11 and I tried to change the configuration accessories and still get an error. For the query mentioned above, I want to know how to configure it
Simon Ren-MSFT 17,366 Reputation points Microsoft Vendor

2022-11-02T08:31:54.5+00:00

Hi,

Thanks for your reply.

The WMI query is configured in the Option page on your Task Sequencer>Preinstall>NewComputerOnly>Format and Partition(UEFI). Then click Add and select Query WMI. As shown below in my lab (you should customize the query accordingly):

Thanks for your time. Have a nice day!

Best regards,
Simon
杨杨涂 1 Reputation point

2022-11-03T14:10:50.14+00:00

I have done this, but it still doesn't work. My disk 1 belongs to SSD500G. I want to set the query to only be installed on this SSD and the size is less than 500g.
Simon Ren-MSFT 17,366 Reputation points Microsoft Vendor

2022-11-08T09:40:19.063+00:00

Hi,

You can use the WMI query like this:
select * from Win32_DiskDriver WHERE SIZE < 524288000

Refer to: Custom partition hard disk sizes with MDT

Best regards,
Simon

I am getting error 5616 error code while installing with MDT

Activity