I create a table in power apps and added some column, when i try to see the form view form the data, i get the error loading control like this.... but from the microsoft learning module it should look like this : anyone know how to fix it?? This question is related to the following Learning Module

Hi Asyifa Tasya Fadilah , Thank you for reaching out to Microsoft Q&A forum. Please refresh the page and try again. If the issue persists, clear your browser cache and history, and check your internet connection to ensure everything is stable. We tried from our end; it's working fine for us. Kindly refer the below screenshots. If you are still facing any issue, please let us know in the comments and where you are encountering this error along with the screenshot for reference. We are glad to help you. If the information is helpful, please Accept Answer so that it would be helpful to community members. Thank you.

How to fix "Error loading Control" in Dataverse Form view (on Power Apps)?

Accepted answer

Syed Saleem Peera 6,410 Reputation points Microsoft Vendor

2024-09-11T04:47:56.45+00:00

Hi Asyifa Tasya Fadilah,

Thank you for reaching out to Microsoft Q&A forum.

Please refresh the page and try again. If the issue persists, clear your browser cache and history, and check your internet connection to ensure everything is stable.

We tried from our end; it's working fine for us. Kindly refer the below screenshots.

If you are still facing any issue, please let us know in the comments and where you are encountering this error along with the screenshot for reference. We are glad to help you.

If the information is helpful, please Accept Answer so that it would be helpful to community members.

Thank you.
Please sign in to rate this answer.
Syed Saleem Peera 6,410 Reputation points Microsoft Vendor

2024-09-12T10:12:16.7566667+00:00

Hi Asyifa Tasya Fadilah,

Just checking in to see if you had a chance to see the previous answer. Please let me know if it was helpful and don't hesitate to reach out to us if you face any issue.

If the information is helpful, please Accept Answer so that it would be helpful to community members.

Thank you

Syed Saleem Peera 6,410 Reputation points Microsoft Vendor

2024-09-12T10:23:23.2766667+00:00

Hi Asyifa Tasya Fadilah,

Glad to hear that your issue got resolved. Please don't hesitate to reach out to us if you have any further queries.

Thank you.

Jeroen Jonckheer 0 Reputation points

2024-09-16T11:29:12.56+00:00

Hi @Syed Saleem Peera ,

we're coping with the same issue, only it didn't go away after refreshing and clearing cache. I also tried a new, incognito browser session to be sure, but to no avail.

In our case, it's about every field on every form in every environment. The front-end is perfectly fine, but the back-end, the developers side is showing nothing but this:

Any other ideas?

Regards,
Jeroen

Syed Saleem Peera 6,410 Reputation points Microsoft Vendor

2024-09-17T03:35:38.12+00:00

Hi Jeroen Jonckheer,

Thank you for your message. Since you've already tried refreshing, clearing the cache, and using an incognito session without success, it seems the issue might be related to permissions or access settings on the back-end.

I recommend reaching out to your system administrator or support team, as this could be a permissions issue preventing the fields from displaying correctly on the developer's side. They will be able to check your access rights and investigate further.

Please feel free to let me know if you need any additional help after contacting your admin team.Thank you.

David Faster 0 Reputation points

2024-09-23T10:55:08.3233333+00:00

Dear all,

I'm facing the exact same issue as highlighted above.
also, clearing browsing history and cache do not help.

My security access to the system is also fine - I'm the system administrator to some of our Dynamics 365 CRM environments, and as such I should not have an issue in accessing this form editor in PowerApps.

I have been noticing this behaviour since a few weeks, before that I have never encountered these error messages.

Appreciate all help here.

kind regards

David

Syed Saleem Peera 6,410 Reputation points Microsoft Vendor

2024-09-23T11:47:17.6166667+00:00

Hi David Faster,

Thank you for reaching out to us on the Microsoft Q&A forum.

Since you're the system administrator and have security access, it seems this issue might not be related to permissions. It could be a system-wide issue or a regional access problem. I suggest checking if the problem persists across different environments or regions, as some regions may have restricted access or ongoing updates.

Thank you.

Giovanni Prior 5 Reputation points

2024-09-24T07:51:03.2433333+00:00

Dear all,

i confirm we are also facing the same problem.

Clearing cache, incognito and reboot do not work.

All environments all forms are involved.

I'm system administrator as well of course.

Please let us know what to do.

Giovanni

Syed Saleem Peera 6,410 Reputation points Microsoft Vendor

2024-09-24T10:27:33.1433333+00:00

Hi Giovanni Prior,

It could be a system-wide issue or a regional access problem. I recommend checking if the issue persists across different environments or regions, as certain regions may have restricted access or ongoing updates.

Thank you.

David Faster 0 Reputation points

2024-09-24T10:35:27.8133333+00:00

Dear Syed

I have asked my collegeague, who has the same access levels to the same environments as myself, and he is not having this issue.

Please - can you do a root cause analysis?

thank you,
David

Giovanni Prior 5 Reputation points

2024-09-24T12:43:43.5066667+00:00

I found a way to solve the problem, allowing "Third-party cookies" in edge browser:

Syed Saleem Peera 6,410 Reputation points Microsoft Vendor

2024-09-24T13:00:55.1+00:00

Hi Giovanni Prior,

Glad to hear that your issue got resolved. Please don't hesitate to reach out to us if you have any further queries.

Thank you.

David Faster 0 Reputation points

2024-09-24T13:24:37.2066667+00:00

@Giovanni Prior thank you - this also works for me!

Alejandro Orozco Mejia 0 Reputation points

2024-09-24T21:10:24.51+00:00

Hi, I got this error anyway after all. Any additional help? Tks

Syed Saleem Peera 6,410 Reputation points Microsoft Vendor

2024-09-26T04:24:11.9933333+00:00

Hi Alejandro Orozco Mejia,

Thank you for reaching out. As discussed in the earlier thread, please try the following steps:

Allow Third-Party Cookies: As Giovanni suggested, enabling third-party cookies in the Edge browser has resolved the issue for some users.

Try Incognito Mode or Clear Cache: If you haven't already, try accessing the platform in incognito mode or after clearing your cache.

Thank you.

AdamChurney-5155 0 Reputation points

2024-10-01T14:03:21.5966667+00:00

I tried all the clearing cache/cookies/incognito/different browser and nothing worked. The form was showing correctly for my co-worker. In a last ditch effort I clicked the "switch to classic" and the classic view was working. I clicked save and went back to the new mode and it was working again.

James Reynolds 0 Reputation points

2024-10-02T05:20:23.4166667+00:00

I am getting the same problem after all the above

James Reynolds 0 Reputation points

2024-10-02T05:38:48.2966667+00:00

Adding 3rd party cookies worked for me in chrome too

Syed Saleem Peera 6,410 Reputation points Microsoft Vendor

2024-10-03T01:36:44.4833333+00:00

Hi James Reynolds,

Glad to hear that your issue got resolved. Please don't hesitate to reach out to us if you have any further queries.

Thank you.
Sign in to comment

Use comments to ask for clarification, additional information, or improvements to the question.

Share via

How to fix "Error loading Control" in Dataverse Form view (on Power Apps)?

0 additional answers

Your answer