Me too, best to contact Medion.
Were you able to run OCCT and the Stress Tests?
Did you try using a fan as test? That often tells a lot about these issues.
Here to help,
Rob
This browser is no longer supported.
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.
please review my bsod errors. I have done a fresh install of win 10. I use Steam a lot.
system runs smooth for a while after fresh install but...
When bsod starts, it just keeps happening!
my post is short as i'm trying to complete it before another crash!
Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.
Me too, best to contact Medion.
Were you able to run OCCT and the Stress Tests?
Did you try using a fan as test? That often tells a lot about these issues.
Here to help,
Rob
Rob
thanks. i have done pretty much everything with regard to drivers etc. so i think it is at this stage a critical hardware fault.
thanks
In a home environment we do not have the software to specifically determine the cause of most hardware issues. So it boils down to running the tests we can and observation. (And most of the software we do have is not 100% accurate on what it does find.)
Added in a home environment there is a limited amount of known good parts to swap in and out nor any of the metering equipment that device makers and some shops have.
And all of that is doubly true for a laptop.
Some of us can take a laptop apart to try to add to our observation, however, I would not advise doing that in a home environment.
Everything I told you is exactly what I would be doing if the issue was mine.
Having done these many many thousands of times I definitely would tell you if I knew of easier or better methods.
Here to help,
Rob
Surely there is an easier way to isolate what hardware is causing this problem?
I have done most of the above. Im Im confident 99% of drivers are OK
Hi DermotG81, I am Rob, an independent and a 14 time and dual award MVP specializing in Windows troubleshooting and Bluescreen analysis. Please remember as independents we are not responsible for the development of Windows or the computer hardware and drivers. If you will work with me I will be here to help until the issue is resolved.
Since it is a gaming laptop the issue seems to be heat related so you need to contact Medion Support.
Try adding a fan blowing on high onto the bottom of the laptop as a test to see if that helps. This is becomes a real problem as laptops age because their fans weaken or even fail with time as the hardware tends to produce even more heat as it ages. Sometimes laptop cooling methods will help.
I would remove ALL power then re-seat the memory and hard drive if possible. Take them out and place them back in - do not attempt to just snug. You want to end up with better connections.
================================================
BugCheck A, {ffffa74ff7d83998, 2, 0, fffff8046331dce9}
Probably caused by : Pool_Corruption ( nt!ExFreePool+9 )
BugCheck A, {8, 2, 0, fffff8036ccc0bc3}
Probably caused by : ntkrnlmp.exe ( nt!KiRetireDpcList+5f3 )
BugCheck 3B, {c0000005, fffff80253dca2a7, ffff80832ed39c80, 0}
Probably caused by : win32kfull.sys ( win32kfull!Win32AllocateFromPagedLookasideListImpl+2f )
BugCheck 3B, {c0000005, fffff8004c7ca2a7, fffffb832814ed60, 0}
Probably caused by : ntkrnlmp.exe ( nt!IopAllocateIrpPrivate+12a )
Those are all Windows components which mean something else drove them into Fault.
Further detailed analysis did not help at all.
1. Check with Medion Support, their on-line docs and drivers, and ask in their forums about any known issues. Update the BIOS, chipset drivers, and all the other major drivers. <-- Check ALL of those at Medion and then check at the actual device makers such as Nvidia and Intel (see driver update methods below).
BiosVersion = 1.05.12RME1_00066
BiosReleaseDate = 01/17/2018 <-- current BIOS
SystemManufacturer = MEDION
SystemProductName = Erazer X7843 MD99945
SystemSKU = ML-210009 30020518
BaseBoardManufacturer = MEDION
BaseBoardProduct = P670RGM
BaseBoardVersion = 1.0
CPUID: "Intel(R) Core(TM) i7-6820HK CPU @ 2.70GHz"
MaxSpeed: 2700
CurrentSpeed: 2712
Medion - Service and Support
https://www.medion.com/gb/service/topic/medion-products
Medion - Community/Forums
https://community.medion.com/
2. Run the Intel Driver and Support Assistant.
Intel Driver and Support Assistant <-- run this after checking with System/Motherboard Maker
http://www.intel.com/p/en_US/support/detect?redirector_count=1&
Intel Download Center
http://downloadcenter.intel.com/
Intel - Support
http://www.intel.com/p/en_US/support
Intel - Forums
https://forums.intel.com/s/?language=en_US
3. Check with Nvidia Support, their on-line docs and drivers, and ask in their forums about any known issues.
Nvidia - Drivers - Use OPTION 1 to manually enter your driver info to get most current drivers.
http://www.nvidia.com/Download/index.aspx?lang=en-us
Nvidia Support - check with Support as it could be a known issue
http://www.nvidia.com/page/support.html
Nvidia Forums - also check for forums as it could be a known issue and/or others likely to have it
http://forums.nvidia.com/
3. Run the memory tests (see methods below).
4. As needed use ALL the methods in the troubleshooters below.
5. After ALL the above if needed run Driver Verifier to see if it can indicate a
CAUSE (see Driver Verifier methods below).
-----------------------------------------------------------
Troubleshoot blue screen errors <-- read this link
http://windows.microsoft.com/en-us/windows-10/troubleshoot-blue-screen-errors
BCCode: 3b 0x0000003b
3b is usually a graphic's driver (display adapter/video driver), other possibilities
include but are not limited to antivirus/antispyware/security programs and even
memory (mapping).
Of course heat is a big concern with a gaming laptop.
BCCode: 3b 0x0000003b <-- read this link
https://tinyurl.com/8qfo58v
==================================================
This utility makes it easy to see which versions are loaded :
Run DriverView - set VIEW to Hide Microsoft drivers - update those without
Dump in their names (and update BIOS and chipset drivers).
DriverView - Free - utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
displayed: load address of the driver, description, version, product name,
company that created the driver, and more.
http://www.nirsoft.net/utils/driverview.html
For Drivers check System Maker as fallbacks and Device Maker's which are the
most current. Right Click the Start Button - Device Manager - Display Adapter -
write down the make and complete model of your video adapter - double click
- Driver's tab - write down the version info. Now click UPdate Driver (this may not
do anything as MS is far behind certifying drivers) - then Right Click - Uninstall -
REBOOT this will refresh the driver stack.
Repeat that for Network - Network Card (NIC), Wifi, Sound, Mouse and Keyboard
if 3rd party with their own software and drivers and any other major device drivers
you have.
Now go to System Maker's site (Dell, HP, Toshiba as examples) (as rollback) and
then Device Maker's site (Realtek, Intel, Nvidia, ATI as examples) and get their
latest versions. (Look for BIOS, Chipset, and software updates at System Maker's
site while there.)
Download - SAVE - go to where you put them - Right Click - RUN AD ADMIN -
REBOOT after each installation.
Always check in Device Manager - Drivers tab to be sure the version you are
installing actually shows up. This is because some drivers rollback before the
latest is installed (sound drivers particularly do this) so install a driver - reboot
- check to be sure it is installed and repeat as needed.
Repeat at Device Makers - BTW at Device Makers DO NOT RUN THEIR SCANNER
- check manually by model.
Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm
====================================================
Memory tests do not catch all errors such as mismatched memory (possible even
for sticks that appear to be identical) and when faster memory is placed in the system behind slower memory. So it is best to also swap sticks in and out to check for those even if all memory tests fail to show a problem.
To test RAM check here - let it run 4+ hours or so - over-night is best. <-- best method
www.memtest.org
MemTestX86 - Test RAM With
http://www.tenforums.com/tutorials/14201-memtest86-test-ram.html
================================================
After doing ALL the updates you can, and if the issue continues, then run
Driver Verifier.
Driver Verifier can help find some BSOD issues :
Using Driver Verifier to identify issues with Windows drivers for advanced users
http://support.microsoft.com/kb/244617
How To Troubleshoot Driver Problems in Windows Vista or 7. (8/8.1 and 10
are essentially the same).
http://www.winvistaclub.com/t79.html
Using Driver Verifier
https://msdn.microsoft.com/en-us/library/windows/hardware/ff545448%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
WINKEY + X - RUN - type in -> verifier /reset hit enter to disable
If Driver Verifier creates a minidump upload it and post the link here so we can
analyze it.
======
Running OCCT for Home Use (Free) may help indicate a cause.
OCCT - Free for Home use
https://www.ocbase.com/
Running Stress Tests might help indicate a cause - use ALL of these.
PC Stress Test free software for Windows 10
https://www.thewindowsclub.com/pc-stress-test-free-software
Here to help,
Rob
------
Standard Disclaimer: Those may be non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.
Please let us know the results and if you need further assistance. Feedback definitely helps us help all.