Create or edit a log search alert rule

This article shows you how to create a new log search alert rule or edit an existing log search alert rule. To learn more about alerts, see the alerts overview.

You create an alert rule by combining the resources to be monitored, the monitoring data from the resource, and the conditions that you want to trigger the alert. You can then define action groups and alert processing rules to determine what happens when an alert is triggered.

Alerts triggered by these alert rules contain a payload that uses the common alert schema.

Accessing the alert rule wizard in the Azure portal

There are several ways that you can create or edit a new alert rule.

Create or edit an alert rule from the portal home page

  1. In the portal, select Monitor > Alerts.

  2. Open the + Create menu, and select Alert rule.

    Screenshot that shows steps to create a new alert rule.

Create or edit an alert rule from a specific resource

  1. In the portal, navigate to the resource.

  2. Select Alerts from the left pane, and then select + Create > Alert rule.

    Screenshot that shows steps to create a new alert rule from a selected resource.

Edit an existing alert rule

  1. In the portal, either from the home page or from a specific resource, select Alerts from the left pane.

  2. Select Alert rules.

  3. Select the alert rule you want to edit, and then select Edit.

    Screenshot that shows steps to edit an existing log search alert rule.

  4. Select any of the tabs for the alert rule to edit the settings.

Configure the scope of the alert rule

  1. On the Select a resource pane, set the scope for your alert rule. You can filter by subscription, resource type, or resource location.

  2. Select Apply.

    Screenshot that shows the select resource pane for creating a new alert rule.

Configure the alert rule conditions

  1. On the Condition tab, when you select the Signal name field, select Custom log search, or select See all signals if you want to choose a different signal for the condition.

  2. (Optional) If you chose to See all signals in the previous step, use the Select a signal pane to search for the signal name or filter the list of signals. Filter by:

    • Signal type: Select Log search.
    • Signal source: The service that sends the "Custom log search" and "Log (saved query)" signals. Select the Signal name and Apply.
  3. On the Logs pane, write a query that returns the log events for which you want to create an alert. To use one of the predefined alert rule queries, expand the Schema and filter pane on the left of the Logs pane. Then select the Queries tab, and select one of the queries.

Limitations for log search alert rule queries:

  • Log search alert rule queries do not support the 'bag_unpack()', 'pivot()' and 'narrow()' plugins.

  • The word "AggregatedValue" is a reserved word, it cannot be used in the query on Log search Alerts rules.

  • The combined size of all data in the log alert rule properties cannot exceed 64KB.

    Screenshot that shows the Query pane when creating a new log search alert rule.

  1. (Optional) If you're querying an ADX or ARG cluster, Log Analytics can't automatically identify the column with the event timestamp. We recommend that you add a time range filter to the query. For example:

        | where MyTS >= ago(5m) and MyTS <= now()
        | where type =~ 'Microsoft.Compute/virtualMachines'
        | project _ResourceId=tolower(id), tags

    Screenshot that shows the Condition tab when creating a new log search alert rule.

    For sample log search alert queries that query ARG or ADX, see Log search alert query samples.

    These are the limitations for using cross queries:

  2. Select Run to run the alert.

  3. The Preview section shows you the query results. When you're finished editing your query, select Continue Editing Alert.

  4. The Condition tab opens populated with your log query. By default, the rule counts the number of results in the last five minutes. If the system detects summarized query results, the rule is automatically updated with that information.

  5. In the Measurement section, select values for these fields:

    Screenshot that shows the Measurement tab when creating a new log search alert rule.

    Field Description
    Measure Log search alerts can measure two different things, which can be used for different monitoring scenarios:
    Table rows: The number of rows returned can be used to work with events such as Windows event logs, Syslog, and application exceptions.
    Calculation of a numeric column: Calculations based on any numeric column can be used to include any number of resources. An example is CPU percentage.
    Aggregation type The calculation performed on multiple records to aggregate them to one numeric value by using the aggregation granularity. Examples are Total, Average, Minimum, or Maximum.
    Aggregation granularity The interval for aggregating multiple records to one numeric value.
  6. (Optional) In the Split by dimensions section, you can use dimensions to help provide context for the triggered alert.

    Screenshot that shows the splitting by dimensions section of a new log search alert rule.

    Dimensions are columns from your query results that contain additional data. When you use dimensions, the alert rule groups the query results by the dimension values and evaluates the results of each group separately. If the condition is met, the rule fires an alert for that group. The alert payload includes the combination that triggered the alert.

    You can apply up to six dimensions per alert rule. Dimensions can only be string or numeric columns. If you want to use a column that isn't a number or string type as a dimension, you must convert it to a string or numeric value in your query. If you select more than one dimension value, each time series that results from the combination triggers its own alert and is charged separately.

    For example:

    • You could use dimensions to monitor CPU usage on multiple instances running your website or app. Each instance is monitored individually, and notifications are sent for each instance where the CPU usage exceeds the configured value.
    • You could decide not to split by dimensions when you want a condition applied to multiple resources in the scope. For example, you wouldn't use dimensions if you want to fire an alert if at least five machines in the resource group scope have CPU usage above the configured value.

    Select values for these fields:

    • Resource ID column: In general, if your alert rule scope is a workspace, the alerts are fired on the workspace. If you want a separate alert for each affected Azure resource, you can:
      • use the ARM Azure Resource ID column as a dimension (notice that by using this option the alert will be fired on the workspace with the Azure Resource ID column as a dimension.
      • specify it as a dimension in the Azure Resource ID property, which makes the resource returned by your query the target of the alert, so alerts are fired on the resource returned by your query, such as a virtual machine or a storage account, as opposed to in the workspace. When you use this option, if the workspace gets data from resources in more than one subscription, alerts can be triggered on resources from a subscription that is different from the alert rule subscription.
    Field Description
    Dimension name Dimensions can be either number or string columns. Dimensions are used to monitor specific time series and provide context to a fired alert.
    Operator The operator used on the dimension name and value.
    Dimension values The dimension values are based on data from the last 48 hours. Select Add custom value to add custom dimension values.
    Include all future values Select this field to include any future values added to the selected dimension.
  7. In the Alert logic section, select values for these fields:

    Screenshot that shows the Alert logic section of a new log search alert rule.

    Field Description
    Operator The query results are transformed into a number. In this field, select the operator to use to compare the number against the threshold.
    Threshold value A number value for the threshold.
    Frequency of evaluation How often the query is run. Can be set anywhere from one minute to one day (24 hours).


    There are some limitations to using a one minute alert rule frequency. When you set the alert rule frequency to one minute, an internal manipulation is performed to optimize the query. This manipulation can cause the query to fail if it contains unsupported operations. The following are the most common reasons a query are not supported:

    • The query contains the search, union * or take (limit) operations
    • The query contains the ingestion_time() function
    • The query uses the adx pattern
    • The query calls a function that calls other tables

    For sample log search alert queries that query ARG or ADX, see Log search alert query samples

  8. (Optional) In the Advanced options section, you can specify the number of failures and the alert evaluation period required to trigger an alert. For example, if you set Aggregation granularity to 5 minutes, you can specify that you only want to trigger an alert if there were three failures (15 minutes) in the last hour. Your application business policy determines this setting.

    Screenshot that shows the Advanced options section of a new log search alert rule.

    Select values for these fields under Number of violations to trigger the alert:

    Field Description
    Number of violations The number of violations that trigger the alert.
    Evaluation period The time period within which the number of violations occur.
    Override query time range If you want the alert evaluation period to be different than the query time range, enter a time range here.
    The alert time range is limited to a maximum of two days. Even if the query contains an ago command with a time range of longer than two days, the two-day maximum time range is applied. For example, even if the query text contains ago(7d), the query only scans up to two days of data. If the query requires more data than the alert evaluation, you can change the time range manually. If the query contains an ago command, it will be changed automatically to 2 days (48 hours).


    If you or your administrator assigned the Azure Policy Azure Log Search Alerts over Log Analytics workspaces should use customer-managed keys, you must select Check workspace linked storage. If you don't, the rule creation will fail because it won't meet the policy requirements.

  9. The Preview chart shows query evaluations results over time. You can change the chart period or select different time series that resulted from a unique alert splitting by dimensions.

    Screenshot that shows a preview of a new alert rule.

  10. Select Done. From this point on, you can select the Review + create button at any time.

Configure the alert rule actions

  1. On the Actions tab, select or create the required action groups.

    Screenshot that shows the Actions tab when creating a new alert rule.

Configure the alert rule details

  1. On the Details tab, define the Project details.

    • Select the Subscription.
    • Select the Resource group.
  2. Define the Alert rule details.

    Screenshot that shows the Details tab when creating a new log search alert rule.

    1. Select the Severity.

    2. Enter values for the Alert rule name and the Alert rule description.


      Notice that rule that uses Identity cannot have the character ";" in the Alert rule name

    3. Select the Region.

    4. In the Identity section, select which identity is used by the log search alert rule to send the log query. This identity is used for authentication when the alert rule executes the log query.

      Keep these things in mind when selecting an identity:

      • A managed identity is required if you're sending a query to Azure Data Explorer (ADX) or to Azure Resource Graph (ARG).
      • Use a managed identity if you want to be able to see or edit the permissions associated with the alert rule.
      • If you don't use a managed identity, the alert rule permissions are based on the permissions of the last user to edit the rule, at the time the rule was last edited.
      • Use a managed identity to help you avoid a case where the rule doesn't work as expected because the user that last edited the rule didn't have permissions for all the resources added to the scope of the rule.

      The identity associated with the rule must have these roles:

      • If the query is accessing a Log Analytics workspace, the identity must be assigned a Reader role for all workspaces accessed by the query. If you're creating resource-centric log search alerts, the alert rule may access multiple workspaces, and the identity must have a reader role on all of them.
      • If you are querying an ADX or ARG cluster you must add Reader role for all data sources accessed by the query. For example, if the query is resource centric, it needs a reader role on that resources.
      • If the query is accessing a remote Azure Data Explorer cluster, the identity must be assigned:
        • Reader role for all data sources accessed by the query. For example, if the query is calling a remote Azure Data Explorer cluster using the adx() function, it needs a reader role on that ADX cluster.
        • Database viewer for all databases the query is accessing.

      For detailed information on managed identities, see managed identities for Azure resources.

      Select one of the following options for the identity used by the alert rule:

      Identity Description
      None Alert rule permissions are based on the permissions of the last user who edited the rule, at the time the rule was edited.
      System assigned managed identity Azure creates a new, dedicated identity for this alert rule. This identity has no permissions and is automatically deleted when the rule is deleted. After creating the rule, you must assign permissions to this identity to access the workspace and data sources needed for the query. For more information about assigning permissions, see Assign Azure roles using the Azure portal.
      User assigned managed identity Before you create the alert rule, you create an identity and assign it appropriate permissions for the log query. This is a regular Azure identity. You can use one identity in multiple alert rules. The identity isn't deleted when the rule is deleted. When you select this type of identity, a pane opens for you to select the associated identity for the rule.
  3. (Optional) In the Advanced options section, you can set several options:

    Field Description
    Enable upon creation Select for the alert rule to start running as soon as you're done creating it.
    Automatically resolve alerts (preview) Select to make the alert stateful. When an alert is stateful, the alert is resolved when the condition is no longer met for a specific time range. The time range differs based on the frequency of the alert:
    1 minute: The alert condition isn't met for 10 minutes.
    5-15 minutes: The alert condition isn't met for three frequency periods.
    15 minutes - 11 hours: The alert condition isn't met for two frequency periods.
    11 to 12 hours: The alert condition isn't met for one frequency period.

    Note that stateful log search alerts have these limitations:
    - they can trigger up to 300 alerts per evaluation.
    - you can have a maximum of 5000 alerts with the fired alert condition.
    Mute actions Select to set a period of time to wait before alert actions are triggered again. If you select this checkbox, the Mute actions for field appears to select the amount of time to wait after an alert is fired before triggering actions again.
    Check workspace linked storage Select if logs workspace linked storage for alerts is configured. If no linked storage is configured, the rule isn't created.
  4. (Optional) In the Custom properties section, if this alert rule contains action groups, you can add your own properties to include in the alert notification payload. You can use these properties in the actions called by the action group, such as by a webhook, Azure function or logic app actions.

    The custom properties are specified as key:value pairs, using either static text, a dynamic value extracted from the alert payload, or a combination of both.

    The format for extracting a dynamic value from the alert payload is: ${<path to schema field>}. For example: ${data.essentials.monitorCondition}.

    Use the format of the common alert schema to specify the field in the payload, whether or not the action groups configured for the alert rule use the common schema.


    • The common schema overwrites custom configurations. You can't use both custom properties and the common schema.
    • Custom properties are added to the payload of the alert, but they do not appear in the email template or in the alert details in the Azure portal.
    • Service Health alerts do not support custom properties.

    Screenshot that shows the custom properties section of creating a new alert rule.

    In the following examples, values in the custom properties are used to utilize data from a payload that uses the common alert schema:

    Example 1

    This example creates an "Additional Details" tag with data regarding the "window start time" and "window end time".

    • Name: "Additional Details"
    • Value: "Evaluation windowStartTime: ${data.alertContext.condition.windowStartTime}. windowEndTime: ${data.alertContext.condition.windowEndTime}"
    • Result: "AdditionalDetails:Evaluation windowStartTime: 2023-04-04T14:39:24.492Z. windowEndTime: 2023-04-04T14:44:24.492Z"

    Example 2 This example adds the data regarding the reason of resolving or firing the alert.

    • Name: "Alert ${data.essentials.monitorCondition} reason"
    • Value: "${data.alertContext.condition.allOf[0].metricName} ${data.alertContext.condition.allOf[0].operator} ${data.alertContext.condition.allOf[0].threshold} ${data.essentials.monitorCondition}. The value is ${data.alertContext.condition.allOf[0].metricValue}"
    • Result: Example results could be something like:
      • "Alert Resolved reason: Percentage CPU GreaterThan5 Resolved. The value is 3.585"
      • ÔÇťAlert Fired reason": "Percentage CPU GreaterThan5 Fired. The value is 10.585"

Configure alert rule tags

  1. On the Tags tab, set any required tags on the alert rule resource.

    Screenshot that shows the Tags tab when creating a new alert rule.

Review and create the alert rule

  1. On the Review + create tab, the rule is validated, and lets you know about any issues.

  2. When validation passes and you've reviewed the settings, select the Create button.

    Screenshot that shows the Review and create tab when creating a new alert rule.

Next steps