HPE ProLiant DL20 Gen 11 (NHP 2LFF)

This article describes the HPE ProLiant DL20 Gen 11 appliance for OT sensors monitoring production lines.

Appliance characteristic Details
Hardware profile L500
Performance Max bandwidth: 200 Mbps
Max devices: 1,000
Physical specifications Mounting: 1U
Ports: 4x RJ45
Status Supported, not available pre-configured

Specifications

Component Technical specifications
Chassis 1U rack server
Dimensions 4.32 x 43.46 x 37.84 cm
1.69 x 17.11 x 15.25in
Processor Intel Xeon E-2434 3.4 GHz 4-core 55 W
Chipset Intel C262
Memory HPE 16 GB (1 x 16 GB) Single Rank x8 DDR5-4800
Storage HPE 1 TB SATA 6 G Business Critical 7.2 K LFF
Network controller On-board: 4 x 1 Gb
On-board iLO Port Card 1 Gb
External 1 x Broadcom BCM5719 Ethernet 1 Gb 4-port BASE-T Adapter for HPE
Management HPE iLO Advanced
Device access Front: One USB 3.2 1 x USB iLO Service Port
Rear: Four USBs 3.2
External 1 x Broadcom BCM5719 Ethernet 1 Gb 4-port BASE-T Adapter for HPE
Internal One USB 3.2
Power HPE 800 W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
Rack support HPE Easy Install Rail 12 Kit

DL20 Gen11 (NHP 2LFF) - Bill of materials

Quantity PN Description
1 P65390-B21 HPE ProLiant DL20 Gen 11 2LFF Non-hot Plug Configure-to-order Server
1 P65390-B21 B19 HPE DL20 Gen11 2LFF NHP CTO Svr
1 P65224-B21 Intel Xeon E-2434 3.4-GHz 4-core 55 W FIO Processor for HPE
1 P64336-B21 HPE 16 GB (1 x 16 GB) Single Rank x8 DDR5-4800 CAS-40-39-39 Unbuffered Standard Memory Kit
1 801882-B21 HPE 1 TB SATA 6 G Business Critical 7.2 K LFF RW 1-year Warranty Multi Vendor HDD
1 P52753-B21 HPE ProLiant DL320 Genll x 16 FHHL Riser Kit
1 P51178-B21 Broadcom BCM5719 Ethernet 1-Gb 4-port BASE-T Adapter for HPE
1 865438-B21 HPE 800 W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
1 AF573A HPE C13 - C14 WW 250V 10 Amp Flint Gray 2.0 m Jumper Cord
1 512485-B21 HPE iLO Advanced 1-server License with 1 yr Support on iLO Licensed Features
1 P64576-B21 HPE Easy Install Rail 12 Kit
1 P65407-B21 HPE ProLiant DL20 Gen11 LP iLO/M.2 Enablement Kit

Install Defender for IoT software on the HPE ProLiant DL20 Gen 11 (NHP 2LFF)

This procedure describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen 11 (NHP 2LFF).

The installation process takes about 20 minutes. After the installation, the system is restarted several times.

To install Defender for IoT software:

  1. Connect the screen and keyboard to the appliance, and then connect to the CLI.

  2. Connect an external CD or disk-on-key that contains the software you downloaded from the Azure portal.

  3. Start the appliance.

  4. Continue with the generic procedure for installing Defender for IoT software. For more information, see Defender for IoT software installation.

Next steps

Continue learning about the system requirements for physical or virtual appliances. For more information, see Which appliances do I need?.

Then, use any of the following procedures to continue: