Microsoft.MobileNetwork packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks 2024-02-01
Bicep resource definition
The packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource type can be deployed with operations that target:
- Resource groups - See resource group deployment commands
For a list of changed properties in each API version, see change log.
Resource format
To create a Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource, add the following Bicep to your template.
resource symbolicname 'Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks@2024-02-01' = {
name: 'string'
location: 'string'
tags: {
tagName1: 'tagValue1'
tagName2: 'tagValue2'
}
parent: resourceSymbolicName
properties: {
dnsAddresses: [
'string'
]
naptConfiguration: {
enabled: 'string'
pinholeLimits: int
pinholeTimeouts: {
icmp: int
tcp: int
udp: int
}
portRange: {
maxPort: int
minPort: int
}
portReuseHoldTime: {
tcp: int
udp: int
}
}
userEquipmentAddressPoolPrefix: 'string'
userEquipmentStaticAddressPoolPrefix: 'string'
userPlaneDataInterface: {
ipv4Address: 'string'
ipv4Gateway: 'string'
ipv4Subnet: 'string'
name: 'string'
}
}
}
Property values
packetCoreControlPlanes/packetCoreDataPlanes/attache...
| Name | Description | Value |
|---|---|---|
| name | The resource name See how to set names and types for child resources in Bicep. |
string (required) Character limit: 1-64 Valid characters: Alphanumeric, hyphens and a period/dot ( .) Start and end with alphanumeric. Note: A period/dot ( .) must be followed by an alphanumeric character. |
| location | The geo-location where the resource lives | string (required) |
| tags | Resource tags. | Dictionary of tag names and values. See Tags in templates |
| parent | In Bicep, you can specify the parent resource for a child resource. You only need to add this property when the child resource is declared outside of the parent resource. For more information, see Child resource outside parent resource. |
Symbolic name for resource of type: packetCoreDataPlanes |
| properties | Attached data network properties. | AttachedDataNetworkPropertiesFormat (required) |
AttachedDataNetworkPropertiesFormat
| Name | Description | Value |
|---|---|---|
| dnsAddresses | The DNS servers to signal to UEs to use for this attached data network. This configuration is mandatory - if you don't want DNS servers, you must provide an empty array. | string[] (required) Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ |
| naptConfiguration | The network address and port translation (NAPT) configuration. If this is not specified, the attached data network will use a default NAPT configuration with NAPT enabled. |
NaptConfiguration |
| userEquipmentAddressPoolPrefix | The user equipment (UE) address pool prefixes for the attached data network from which the packet core instance will dynamically assign IP addresses to UEs. The packet core instance assigns an IP address to a UE when the UE sets up a PDU session. You must define at least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix. If you define both, they must be of the same size. |
string Constraints: Min length = 1 Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\/([0-9]|[1-2][0-9]|3[0-2]))$"} |
| userEquipmentStaticAddressPoolPrefix | The user equipment (UE) address pool prefixes for the attached data network from which the packet core instance will assign static IP addresses to UEs. The packet core instance assigns an IP address to a UE when the UE sets up a PDU session. The static IP address for a specific UE is set in StaticIPConfiguration on the corresponding SIM resource. At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined, they must be of the same size. |
string Constraints: Min length = 1 Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\/([0-9]|[1-2][0-9]|3[0-2]))$"} |
| userPlaneDataInterface | The user plane interface on the data network. For 5G networks, this is the N6 interface. For 4G networks, this is the SGi interface. | InterfaceProperties (required) |
NaptConfiguration
| Name | Description | Value |
|---|---|---|
| enabled | Whether NAPT is enabled for connections to this attached data network. | 'Disabled' 'Enabled' |
| pinholeLimits | Maximum number of UDP and TCP pinholes that can be open simultaneously on the core interface. For 5G networks, this is the N6 interface. For 4G networks, this is the SGi interface. | int Constraints: Min value = 1 Max value = 65536 |
| pinholeTimeouts | Expiry times of inactive NAPT pinholes, in seconds. All timers must be at least 1 second. | PinholeTimeouts |
| portRange | Range of port numbers to use as translated ports on each translated address. If not specified and NAPT is enabled, this range defaults to 1,024 - 49,999. (Ports under 1,024 should not be used because these are special purpose ports reserved by IANA. Ports 50,000 and above are reserved for non-NAPT use.) |
PortRange |
| portReuseHoldTime | The minimum time (in seconds) that will pass before a port that was used by a closed pinhole can be recycled for use by another pinhole. All hold times must be at least 1 second. | PortReuseHoldTimes |
PinholeTimeouts
| Name | Description | Value |
|---|---|---|
| icmp | Pinhole timeout for ICMP pinholes in seconds. Default for ICMP Echo is 30 seconds. | int Constraints: Min value = 1 |
| tcp | Pinhole timeout for TCP pinholes in seconds. Default for TCP is 3 minutes. | int Constraints: Min value = 1 |
| udp | Pinhole timeout for UDP pinholes in seconds. Default for UDP is 30 seconds. | int Constraints: Min value = 1 |
PortRange
| Name | Description | Value |
|---|---|---|
| maxPort | The maximum port number | int Constraints: Min value = 1024 Max value = 65535 |
| minPort | The minimum port number | int Constraints: Min value = 1024 Max value = 65535 |
PortReuseHoldTimes
| Name | Description | Value |
|---|---|---|
| tcp | Minimum time in seconds that will pass before a TCP port that was used by a closed pinhole can be reused. Default for TCP is 2 minutes. | int Constraints: Min value = 1 |
| udp | Minimum time in seconds that will pass before a UDP port that was used by a closed pinhole can be reused. Default for UDP is 1 minute. | int Constraints: Min value = 1 |
InterfaceProperties
| Name | Description | Value |
|---|---|---|
| ipv4Address | The IPv4 address. | string Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ |
| ipv4Gateway | The default IPv4 gateway (router). | string Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ |
| ipv4Subnet | The IPv4 subnet. | string Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\/([0-9]|[1-2][0-9]|3[0-2]))$ |
| name | The logical name for this interface. This should match one of the interfaces configured on your Azure Stack Edge device. | string |
Quickstart templates
The following quickstart templates deploy this resource type.
| Template | Description |
|---|---|
Create a full 5G Core deployment |
This template creates all resources required to deploy a Private 5G Core, including provisioning sims and creating sample QoS policy. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device. |
| Create a new mobile network site |
This template creates a new site with associated 5G packet core resources. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device. |
ARM template resource definition
The packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource type can be deployed with operations that target:
- Resource groups - See resource group deployment commands
For a list of changed properties in each API version, see change log.
Resource format
To create a Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource, add the following JSON to your template.
{
"type": "Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks",
"apiVersion": "2024-02-01",
"name": "string",
"location": "string",
"tags": {
"tagName1": "tagValue1",
"tagName2": "tagValue2"
},
"properties": {
"dnsAddresses": [ "string" ],
"naptConfiguration": {
"enabled": "string",
"pinholeLimits": "int",
"pinholeTimeouts": {
"icmp": "int",
"tcp": "int",
"udp": "int"
},
"portRange": {
"maxPort": "int",
"minPort": "int"
},
"portReuseHoldTime": {
"tcp": "int",
"udp": "int"
}
},
"userEquipmentAddressPoolPrefix": "string",
"userEquipmentStaticAddressPoolPrefix": "string",
"userPlaneDataInterface": {
"ipv4Address": "string",
"ipv4Gateway": "string",
"ipv4Subnet": "string",
"name": "string"
}
}
}
Property values
packetCoreControlPlanes/packetCoreDataPlanes/attache...
| Name | Description | Value |
|---|---|---|
| type | The resource type | 'Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks' |
| apiVersion | The resource api version | '2024-02-01' |
| name | The resource name See how to set names and types for child resources in JSON ARM templates. |
string (required) Character limit: 1-64 Valid characters: Alphanumeric, hyphens and a period/dot ( .) Start and end with alphanumeric. Note: A period/dot ( .) must be followed by an alphanumeric character. |
| location | The geo-location where the resource lives | string (required) |
| tags | Resource tags. | Dictionary of tag names and values. See Tags in templates |
| properties | Attached data network properties. | AttachedDataNetworkPropertiesFormat (required) |
AttachedDataNetworkPropertiesFormat
| Name | Description | Value |
|---|---|---|
| dnsAddresses | The DNS servers to signal to UEs to use for this attached data network. This configuration is mandatory - if you don't want DNS servers, you must provide an empty array. | string[] (required) Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ |
| naptConfiguration | The network address and port translation (NAPT) configuration. If this is not specified, the attached data network will use a default NAPT configuration with NAPT enabled. |
NaptConfiguration |
| userEquipmentAddressPoolPrefix | The user equipment (UE) address pool prefixes for the attached data network from which the packet core instance will dynamically assign IP addresses to UEs. The packet core instance assigns an IP address to a UE when the UE sets up a PDU session. You must define at least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix. If you define both, they must be of the same size. |
string Constraints: Min length = 1 Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\/([0-9]|[1-2][0-9]|3[0-2]))$"} |
| userEquipmentStaticAddressPoolPrefix | The user equipment (UE) address pool prefixes for the attached data network from which the packet core instance will assign static IP addresses to UEs. The packet core instance assigns an IP address to a UE when the UE sets up a PDU session. The static IP address for a specific UE is set in StaticIPConfiguration on the corresponding SIM resource. At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined, they must be of the same size. |
string Constraints: Min length = 1 Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\/([0-9]|[1-2][0-9]|3[0-2]))$"} |
| userPlaneDataInterface | The user plane interface on the data network. For 5G networks, this is the N6 interface. For 4G networks, this is the SGi interface. | InterfaceProperties (required) |
NaptConfiguration
| Name | Description | Value |
|---|---|---|
| enabled | Whether NAPT is enabled for connections to this attached data network. | 'Disabled' 'Enabled' |
| pinholeLimits | Maximum number of UDP and TCP pinholes that can be open simultaneously on the core interface. For 5G networks, this is the N6 interface. For 4G networks, this is the SGi interface. | int Constraints: Min value = 1 Max value = 65536 |
| pinholeTimeouts | Expiry times of inactive NAPT pinholes, in seconds. All timers must be at least 1 second. | PinholeTimeouts |
| portRange | Range of port numbers to use as translated ports on each translated address. If not specified and NAPT is enabled, this range defaults to 1,024 - 49,999. (Ports under 1,024 should not be used because these are special purpose ports reserved by IANA. Ports 50,000 and above are reserved for non-NAPT use.) |
PortRange |
| portReuseHoldTime | The minimum time (in seconds) that will pass before a port that was used by a closed pinhole can be recycled for use by another pinhole. All hold times must be at least 1 second. | PortReuseHoldTimes |
PinholeTimeouts
| Name | Description | Value |
|---|---|---|
| icmp | Pinhole timeout for ICMP pinholes in seconds. Default for ICMP Echo is 30 seconds. | int Constraints: Min value = 1 |
| tcp | Pinhole timeout for TCP pinholes in seconds. Default for TCP is 3 minutes. | int Constraints: Min value = 1 |
| udp | Pinhole timeout for UDP pinholes in seconds. Default for UDP is 30 seconds. | int Constraints: Min value = 1 |
PortRange
| Name | Description | Value |
|---|---|---|
| maxPort | The maximum port number | int Constraints: Min value = 1024 Max value = 65535 |
| minPort | The minimum port number | int Constraints: Min value = 1024 Max value = 65535 |
PortReuseHoldTimes
| Name | Description | Value |
|---|---|---|
| tcp | Minimum time in seconds that will pass before a TCP port that was used by a closed pinhole can be reused. Default for TCP is 2 minutes. | int Constraints: Min value = 1 |
| udp | Minimum time in seconds that will pass before a UDP port that was used by a closed pinhole can be reused. Default for UDP is 1 minute. | int Constraints: Min value = 1 |
InterfaceProperties
| Name | Description | Value |
|---|---|---|
| ipv4Address | The IPv4 address. | string Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ |
| ipv4Gateway | The default IPv4 gateway (router). | string Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ |
| ipv4Subnet | The IPv4 subnet. | string Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\/([0-9]|[1-2][0-9]|3[0-2]))$ |
| name | The logical name for this interface. This should match one of the interfaces configured on your Azure Stack Edge device. | string |
Quickstart templates
The following quickstart templates deploy this resource type.
| Template | Description |
|---|---|
| Create a full 5G Core deployment |
This template creates all resources required to deploy a Private 5G Core, including provisioning sims and creating sample QoS policy. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device. |
| Create a new mobile network site |
This template creates a new site with associated 5G packet core resources. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device. |
Terraform (AzAPI provider) resource definition
The packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource type can be deployed with operations that target:
- Resource groups
For a list of changed properties in each API version, see change log.
Resource format
To create a Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource, add the following Terraform to your template.
resource "azapi_resource" "symbolicname" {
type = "Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks@2024-02-01"
name = "string"
location = "string"
parent_id = "string"
tags = {
tagName1 = "tagValue1"
tagName2 = "tagValue2"
}
body = jsonencode({
properties = {
dnsAddresses = [
"string"
]
naptConfiguration = {
enabled = "string"
pinholeLimits = int
pinholeTimeouts = {
icmp = int
tcp = int
udp = int
}
portRange = {
maxPort = int
minPort = int
}
portReuseHoldTime = {
tcp = int
udp = int
}
}
userEquipmentAddressPoolPrefix = "string"
userEquipmentStaticAddressPoolPrefix = "string"
userPlaneDataInterface = {
ipv4Address = "string"
ipv4Gateway = "string"
ipv4Subnet = "string"
name = "string"
}
}
})
}
Property values
packetCoreControlPlanes/packetCoreDataPlanes/attache...
| Name | Description | Value |
|---|---|---|
| type | The resource type | "Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks@2024-02-01" |
| name | The resource name | string (required) Character limit: 1-64 Valid characters: Alphanumeric, hyphens and a period/dot ( .) Start and end with alphanumeric. Note: A period/dot ( .) must be followed by an alphanumeric character. |
| location | The geo-location where the resource lives | string (required) |
| parent_id | The ID of the resource that is the parent for this resource. | ID for resource of type: packetCoreDataPlanes |
| tags | Resource tags. | Dictionary of tag names and values. |
| properties | Attached data network properties. | AttachedDataNetworkPropertiesFormat (required) |
AttachedDataNetworkPropertiesFormat
| Name | Description | Value |
|---|---|---|
| dnsAddresses | The DNS servers to signal to UEs to use for this attached data network. This configuration is mandatory - if you don't want DNS servers, you must provide an empty array. | string[] (required) Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ |
| naptConfiguration | The network address and port translation (NAPT) configuration. If this is not specified, the attached data network will use a default NAPT configuration with NAPT enabled. |
NaptConfiguration |
| userEquipmentAddressPoolPrefix | The user equipment (UE) address pool prefixes for the attached data network from which the packet core instance will dynamically assign IP addresses to UEs. The packet core instance assigns an IP address to a UE when the UE sets up a PDU session. You must define at least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix. If you define both, they must be of the same size. |
string Constraints: Min length = 1 Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\/([0-9]|[1-2][0-9]|3[0-2]))$"} |
| userEquipmentStaticAddressPoolPrefix | The user equipment (UE) address pool prefixes for the attached data network from which the packet core instance will assign static IP addresses to UEs. The packet core instance assigns an IP address to a UE when the UE sets up a PDU session. The static IP address for a specific UE is set in StaticIPConfiguration on the corresponding SIM resource. At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined, they must be of the same size. |
string Constraints: Min length = 1 Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\/([0-9]|[1-2][0-9]|3[0-2]))$"} |
| userPlaneDataInterface | The user plane interface on the data network. For 5G networks, this is the N6 interface. For 4G networks, this is the SGi interface. | InterfaceProperties (required) |
NaptConfiguration
| Name | Description | Value |
|---|---|---|
| enabled | Whether NAPT is enabled for connections to this attached data network. | "Disabled" "Enabled" |
| pinholeLimits | Maximum number of UDP and TCP pinholes that can be open simultaneously on the core interface. For 5G networks, this is the N6 interface. For 4G networks, this is the SGi interface. | int Constraints: Min value = 1 Max value = 65536 |
| pinholeTimeouts | Expiry times of inactive NAPT pinholes, in seconds. All timers must be at least 1 second. | PinholeTimeouts |
| portRange | Range of port numbers to use as translated ports on each translated address. If not specified and NAPT is enabled, this range defaults to 1,024 - 49,999. (Ports under 1,024 should not be used because these are special purpose ports reserved by IANA. Ports 50,000 and above are reserved for non-NAPT use.) |
PortRange |
| portReuseHoldTime | The minimum time (in seconds) that will pass before a port that was used by a closed pinhole can be recycled for use by another pinhole. All hold times must be at least 1 second. | PortReuseHoldTimes |
PinholeTimeouts
| Name | Description | Value |
|---|---|---|
| icmp | Pinhole timeout for ICMP pinholes in seconds. Default for ICMP Echo is 30 seconds. | int Constraints: Min value = 1 |
| tcp | Pinhole timeout for TCP pinholes in seconds. Default for TCP is 3 minutes. | int Constraints: Min value = 1 |
| udp | Pinhole timeout for UDP pinholes in seconds. Default for UDP is 30 seconds. | int Constraints: Min value = 1 |
PortRange
| Name | Description | Value |
|---|---|---|
| maxPort | The maximum port number | int Constraints: Min value = 1024 Max value = 65535 |
| minPort | The minimum port number | int Constraints: Min value = 1024 Max value = 65535 |
PortReuseHoldTimes
| Name | Description | Value |
|---|---|---|
| tcp | Minimum time in seconds that will pass before a TCP port that was used by a closed pinhole can be reused. Default for TCP is 2 minutes. | int Constraints: Min value = 1 |
| udp | Minimum time in seconds that will pass before a UDP port that was used by a closed pinhole can be reused. Default for UDP is 1 minute. | int Constraints: Min value = 1 |
InterfaceProperties
| Name | Description | Value |
|---|---|---|
| ipv4Address | The IPv4 address. | string Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ |
| ipv4Gateway | The default IPv4 gateway (router). | string Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ |
| ipv4Subnet | The IPv4 subnet. | string Constraints: Pattern = ^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\/([0-9]|[1-2][0-9]|3[0-2]))$ |
| name | The logical name for this interface. This should match one of the interfaces configured on your Azure Stack Edge device. | string |
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for