Share via

az dnc delegated-subnet-service

  • Preview
  • Reference

Note

This reference is part of the dnc extension for the Azure CLI (version 2.51.0 or higher). The extension will automatically install the first time you run an az dnc delegated-subnet-service command. Learn more about extensions.

Command group 'az dnc' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Manage delegated subnet service with dnc.

Commands

Name Description Type Status
az dnc delegated-subnet-service create

Create delegated subnet resource.

 Extension Preview
az dnc delegated-subnet-service delete

Delete dnc DelegatedSubnet.

 Extension Preview
az dnc delegated-subnet-service show

Get details about the specified dnc DelegatedSubnet Link.

 Extension Preview
az dnc delegated-subnet-service wait

Place the CLI in a waiting state until a condition is met.

 Extension Preview

az dnc delegated-subnet-service create

Preview

Command group 'az dnc delegated-subnet-service' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Create delegated subnet resource.

az dnc delegated-subnet-service create --name
                                       --resource-group
                                       [--allocation-block-prefix-size]
                                       [--id]
                                       [--location]
                                       [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                       [--subnet-details-id]
                                       [--tags]

Examples

Create a subnet delegated to DNC

az dnc delegated-subnet-service create --location "West US" --id "/subscriptions/613192d7-503f-477a-9cfe-4efc3ee2bd60/resourceGroups/TestRG/providers/Microsoft.DelegatedNetwork/controller/dnctestcontroller" --subnet-details-id "/subscriptions/613192d7-503f-477a-9cfe-4efc3ee2bd60/resourceGroups/TestRG/providers/Microsoft.Network/virtualNetworks/testvnet/subnets/testsubnet" --resource-group "TestRG" --resource-name "delegated1" --allocation-block-prefix-size 27

Required Parameters

--name --resource-name -n

The name of the resource. It must be a minimum of 3 characters, and a maximum of 63.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--allocation-block-prefix-size -a
Preview

Defines prefix size of CIDR blocks allocated to nodes in VnetBlock Mode.

--id

Controller arm resource id.

--location -l

Location of the resource.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--subnet-details-id

Subnet arm resource id.

--tags

The resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az dnc delegated-subnet-service delete

Preview

Command group 'az dnc delegated-subnet-service' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Delete dnc DelegatedSubnet.

az dnc delegated-subnet-service delete [--force-delete {0, 1, f, false, n, no, t, true, y, yes}]
                                       [--ids]
                                       [--name]
                                       [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                       [--resource-group]
                                       [--subscription]
                                       [--yes]

Examples

Delete the subnet delegated to DNC

az dnc delegated-subnet-service delete --resource-group "TestRG" --resource-name "delegated1"

Optional Parameters

--force-delete

Force delete resource.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name --resource-name -n

The name of the resource. It must be a minimum of 3 characters, and a maximum of 63.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--yes -y

Do not prompt for confirmation.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az dnc delegated-subnet-service show

Preview

Command group 'az dnc delegated-subnet-service' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Get details about the specified dnc DelegatedSubnet Link.

az dnc delegated-subnet-service show [--ids]
                                     [--name]
                                     [--resource-group]
                                     [--subscription]

Examples

Get details of a subnet delegated to DNC

az dnc delegated-subnet-service show --resource-group "TestRG" --resource-name "delegated1"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name --resource-name -n

The name of the resource. It must be a minimum of 3 characters, and a maximum of 63.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az dnc delegated-subnet-service wait

Preview

Command group 'az dnc delegated-subnet-service' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Place the CLI in a waiting state until a condition is met.

az dnc delegated-subnet-service wait [--created]
                                     [--custom]
                                     [--deleted]
                                     [--exists]
                                     [--ids]
                                     [--interval]
                                     [--name]
                                     [--resource-group]
                                     [--subscription]
                                     [--timeout]
                                     [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--name --resource-name -n

The name of the resource. It must be a minimum of 3 characters, and a maximum of 63.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.