Share via


az mobile-network service

Note

This reference is part of the mobile-network extension for the Azure CLI (version 2.55.0 or higher). The extension will automatically install the first time you run an az mobile-network service command. Learn more about extensions.

Manage service.

Commands

Name Description Type Status
az mobile-network service create

Create a service.

Extension GA
az mobile-network service delete

Delete the specified service.

Extension GA
az mobile-network service list

List all the services in a mobile network.

Extension GA
az mobile-network service show

Get information about the specified service.

Extension GA
az mobile-network service update

Update a service.

Extension GA
az mobile-network service wait

Place the CLI in a waiting state until a condition is met.

Extension GA

az mobile-network service create

Create a service.

az mobile-network service create --mobile-network-name
                                 --name
                                 --pcc-rules
                                 --resource-group
                                 --service-precedence
                                 [--location]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--service-qos-policy]
                                 [--tags]

Examples

Create service

az mobile-network service create -n service-name -g rg --mobile-network-name mobile-network-name --pcc-rules "[{ruleName:default-rule,rulePrecedence:10,serviceDataFlowTemplates:[{templateName:IP-to-server,direction:Uplink,protocol:[ip],remoteIpList:[10.3.4.0/24]}]}]" --service-precedence 10

Required Parameters

--mobile-network-name

The name of the mobile network.

--name --service-name -n

The name of the service. You must not use any of the following reserved strings - default, requested or service.

--pcc-rules

The set of data flow policy rules that make up this service. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--service-precedence

A precedence value that is used to decide between services when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all services configured in the mobile network.

Optional Parameters

--location -l

The geo-location where the resource lives When not specified, the location of the resource group will be used.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--service-qos-policy

The QoS policy to use for packets matching this service. This can be overridden for particular flows using the ruleQosPolicy field in a PccRuleConfiguration. If this field is null then the UE's SIM policy will define the QoS settings. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az mobile-network service delete

Delete the specified service.

az mobile-network service delete [--ids]
                                 [--mobile-network-name]
                                 [--name]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--resource-group]
                                 [--subscription]
                                 [--yes]

Examples

Delete service

az mobile-network service delete --mobile-network-name mobile-network-name -n service -g rg -y

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--mobile-network-name

The name of the mobile network.

--name --service-name -n

The name of the service. You must not use any of the following reserved strings - default, requested or service.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--yes -y

Do not prompt for confirmation.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az mobile-network service list

List all the services in a mobile network.

az mobile-network service list --mobile-network-name
                               --resource-group
                               [--max-items]
                               [--next-token]

Examples

List service by resource group

az mobile-network service list --mobile-network-name mobile-network-name -g rg

Required Parameters

--mobile-network-name

The name of the mobile network.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az mobile-network service show

Get information about the specified service.

az mobile-network service show [--ids]
                               [--mobile-network-name]
                               [--name]
                               [--resource-group]
                               [--subscription]

Examples

Show service

az mobile-network service show --mobile-network-name mobile-network-name -n service -g rg

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--mobile-network-name

The name of the mobile network.

--name --service-name -n

The name of the service. You must not use any of the following reserved strings - default, requested or service.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az mobile-network service update

Update a service.

az mobile-network service update [--add]
                                 [--force-string {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--ids]
                                 [--mobile-network-name]
                                 [--name]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--pcc-rules]
                                 [--remove]
                                 [--resource-group]
                                 [--service-precedence]
                                 [--service-qos-policy]
                                 [--set]
                                 [--subscription]
                                 [--tags]

Examples

Update service tags

az mobile-network service update --mobile-network-name mobile-network-name -g rg -n service-name --tags "{tag:test,tag2:test2}"

Optional Parameters

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--mobile-network-name

The name of the mobile network.

--name --service-name -n

The name of the service. You must not use any of the following reserved strings - default, requested or service.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--pcc-rules

The set of data flow policy rules that make up this service. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--service-precedence

A precedence value that is used to decide between services when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all services configured in the mobile network.

--service-qos-policy

The QoS policy to use for packets matching this service. This can be overridden for particular flows using the ruleQosPolicy field in a PccRuleConfiguration. If this field is null then the UE's SIM policy will define the QoS settings. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az mobile-network service wait

Place the CLI in a waiting state until a condition is met.

az mobile-network service wait [--created]
                               [--custom]
                               [--deleted]
                               [--exists]
                               [--ids]
                               [--interval]
                               [--mobile-network-name]
                               [--name]
                               [--resource-group]
                               [--subscription]
                               [--timeout]
                               [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--mobile-network-name

The name of the mobile network.

--name --service-name -n

The name of the service. You must not use any of the following reserved strings - default, requested or service.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.