az network application-gateway private-link

Manage private link of an application gateway.

Commands

Name	Description	Type	Status
az network application-gateway private-link add	Add a new private link with a default IP configuration and associate it with an existing frontend IP.	Core	Preview
az network application-gateway private-link ip-config	Manage IP configuration of a private link to configure its capability.	Core	Preview
az network application-gateway private-link ip-config add	Add an IP configuration to a private link to scale up its capability.	Core	Preview
az network application-gateway private-link ip-config list	List all the IP configurations of a private link.	Core	Preview
az network application-gateway private-link ip-config remove	Remove an IP configuration from a private link to scale down its capability.	Core	Preview
az network application-gateway private-link ip-config show	Show an IP configuration of a private link.	Core	Preview
az network application-gateway private-link ip-config wait	Place the CLI in a waiting state until a condition is met.	Core	Preview
az network application-gateway private-link list	List all the private links.	Core	Preview
az network application-gateway private-link remove	Remove a private link and clear association with Frontend IP. The subnet associate with a private link might need to clear manually.	Core	Preview
az network application-gateway private-link show	Show a private link.	Core	Preview
az network application-gateway private-link wait	Place the CLI in a waiting state until a condition is met.	Core	GA

az network application-gateway private-link add

Edit

Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Add a new private link with a default IP configuration and associate it with an existing frontend IP.

az network application-gateway private-link add --frontend-ip
                                                --gateway-name
                                                --name
                                                --resource-group
                                                --subnet
                                                [--ip-address]
                                                [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                [--primary {0, 1, f, false, n, no, t, true, y, yes}]
                                                [--subnet-prefix]

Examples

Add one private link.

az network application-gateway private-link add -g MyResourceGroup --gateway-name MyGateway --name MyPrivateLink --frontend-ip MyFrontendIP --subnet MySubnet --subnet-prefix MyPrefix

Required Parameters

--frontend-ip

Frontend IP that the private link will associate to.

--gateway-name

Name of the application gateway.

--name -n

Name of the private link configuration.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subnet

Name or ID of a subnet within the same vnet of an application gateway.

Property	Value
Parameter group:	Properties Arguments

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ip-address

Static private IP address of a subnet for private link. If omitting, a dynamic one will be created.

Property	Value
Parameter group:	Properties Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--primary

Whether the IP configuration is primary or not.

Property	Value
Parameter group:	Properties Arguments
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--subnet-prefix

CIDR prefix to use when creating a new subnet.

Property	Value
Parameter group:	Properties Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network application-gateway private-link list

Edit

Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

List all the private links.

az network application-gateway private-link list --gateway-name
                                                 --resource-group

Examples

List all the private links.

az network application-gateway private-link list -g MyResourceGroup --gateway-name MyGateway

Required Parameters

--gateway-name

Name of the application gateway.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network application-gateway private-link remove

Edit

Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Remove a private link and clear association with Frontend IP. The subnet associate with a private link might need to clear manually.

az network application-gateway private-link remove --gateway-name
                                                   --name
                                                   --resource-group
                                                   [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                   [--yes]

Examples

Remove a private link.

az network application-gateway private-link remove -g MyResourceGroup --gateway-name MyGateway --name MyPrivateLink --yes

Required Parameters

--gateway-name

Name of the application gateway.

--name -n

Name of the private link configuration.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--yes -y

Do not prompt for confirmation.

Property	Value
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network application-gateway private-link show

Edit

Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Show a private link.

az network application-gateway private-link show --gateway-name
                                                 --name
                                                 --resource-group

Examples

Show a private link.

az network application-gateway private-link show -n MyPrivateLink -g MyResourceGroup --gateway-name MyGateway

Required Parameters

--gateway-name

Name of the application gateway.

--name -n

Name of the private link configuration.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network application-gateway private-link wait

Edit

Place the CLI in a waiting state until a condition is met.

az network application-gateway private-link wait [--created]
                                                 [--custom]
                                                 [--deleted]
                                                 [--exists]
                                                 [--gateway-name]
                                                 [--ids]
                                                 [--interval]
                                                 [--resource-group]
                                                 [--subscription]
                                                 [--timeout]
                                                 [--updated]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

Property	Value
Parameter group:	Wait Condition Arguments

--deleted

Wait until deleted.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--exists

Wait until the resource exists.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--gateway-name

Name of the application gateway.

Property	Value
Parameter group:	Resource Id Arguments

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--interval

Polling interval in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	30

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--timeout

Maximum wait in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	3600

--updated

Wait until updated with provisioningState at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

Share via

az network application-gateway private-link

Commands

az network application-gateway private-link add

Examples

Required Parameters

Optional Parameters

az network application-gateway private-link list

Examples

Required Parameters

az network application-gateway private-link remove

Examples

Required Parameters

Optional Parameters

az network application-gateway private-link show

Examples

Required Parameters

az network application-gateway private-link wait

Optional Parameters

Feedback