az network cross-region-lb address-pool address

  • Reference

Manage backend addresses of the cross-region load balance backend address pool.

Commands

Name Description Type Status
az network cross-region-lb address-pool address add

Add one backend address into the load balance backend address pool.

 Core Preview
az network cross-region-lb address-pool address list

List all backend addresses of the load balance backend address pool.

 Core Preview
az network cross-region-lb address-pool address remove

Remove one backend address from the load balance backend address pool.

 Core Preview
az network cross-region-lb address-pool address show

Show the backend address from the load balance backend address pool.

 Core Preview
az network cross-region-lb address-pool address update

Update the backend address into the load balance backend address pool.

 Core Preview

az network cross-region-lb address-pool address add

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Add one backend address into the load balance backend address pool.

az network cross-region-lb address-pool address add --frontend-ip
                                                    --lb-name
                                                    --name
                                                    --pool-name
                                                    --resource-group
                                                    [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]

Examples

Add one backend address into the load balance backend address pool.

az network cross-region-lb address-pool address add -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool -n MyAddress --frontend-ip-address /subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/cli_test_lb_address_pool_addresses000001/providers/Microsoft.Network/loadBalancers/regional-lb/frontendIPConfigurations/fe-rlb2

Required Parameters

--frontend-ip --frontend-ip-address

The frontend IP configuration ID of a regional load balance.

--lb-name

The name of the load balancer.

--name -n

Name of the backend address.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

accepted values: 0, 1, f, false, n, no, t, true, y, yes
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-region-lb address-pool address list

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

List all backend addresses of the load balance backend address pool.

az network cross-region-lb address-pool address list --lb-name
                                                     --pool-name
                                                     --resource-group

Examples

List all backend addresses of the load balance backend address pool.

az network cross-region-lb address-pool address list -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool

Required Parameters

--lb-name

The name of the load balancer.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-region-lb address-pool address remove

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Remove one backend address from the load balance backend address pool.

az network cross-region-lb address-pool address remove --lb-name
                                                       --name
                                                       --pool-name
                                                       --resource-group
                                                       [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]

Examples

Remove one backend address from the load balance backend address pool.

az network cross-region-lb address-pool address remove -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool -n MyAddress

Required Parameters

--lb-name

The name of the load balancer.

--name -n

Name of the backend address.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

accepted values: 0, 1, f, false, n, no, t, true, y, yes
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-region-lb address-pool address show

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Show the backend address from the load balance backend address pool.

az network cross-region-lb address-pool address show --lb-name
                                                     --name
                                                     --pool-name
                                                     --resource-group

Examples

Show the backend address from the load balance backend address pool.

az network cross-region-lb address-pool address show -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool -n MyAddress

Required Parameters

--lb-name

The name of the load balancer.

--name -n

Name of the backend address.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-region-lb address-pool address update

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Update the backend address into the load balance backend address pool.

az network cross-region-lb address-pool address update --lb-name
                                                       --name
                                                       --pool-name
                                                       --resource-group
                                                       [--add]
                                                       [--force-string {0, 1, f, false, n, no, t, true, y, yes}]
                                                       [--frontend-ip]
                                                       [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                       [--remove]
                                                       [--set]

Examples

Update the frontend ip of the backend address into the load balance backend address pool.

az network cross-region-lb address-pool address update -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool -n MyAddress --frontend-ip-address /subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/cli_test_lb_address_pool_addresses000001/providers/Microsoft.Network/loadBalancers/regional-lb/frontendIPConfigurations/fe-rlb2

Required Parameters

--lb-name

The name of the load balancer.

--name -n

Name of the backend address.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

accepted values: 0, 1, f, false, n, no, t, true, y, yes
--frontend-ip --frontend-ip-address

The frontend IP configuration ID of a regional load balance.

--no-wait

Do not wait for the long-running operation to finish.

accepted values: 0, 1, f, false, n, no, t, true, y, yes
--remove

Remove a property or an element from a list. Example: --remove property.list OR --remove propertyToRemove.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.