Share via

az network dns dnssec-config

  • Experimental

This command group is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Manage DNSSEC configurations.

Commands

Name Description Type Status
az network dns dnssec-config create

Create the DNSSEC configuration on a DNS zone.

 Core Experimental
az network dns dnssec-config delete

Delete the DNSSEC configuration on a DNS zone. This operation cannot be undone.

 Core Experimental
az network dns dnssec-config show

Get the DNSSEC configuration.

 Core Experimental
az network dns dnssec-config wait

Place the CLI in a waiting state until a condition is met.

 Core Experimental

az network dns dnssec-config create

Edit
Experimental

Command group 'az network dns dnssec-config' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Create the DNSSEC configuration on a DNS zone.

az network dns dnssec-config create --resource-group
                                    --zone-name
                                    [--if-match]
                                    [--if-none-match]
                                    [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]

Examples

Enable DNSSEC on a zone.

az network dns dnssec-config create -g MyResourceGroup -z www.mysite.com

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--zone-name -z

Name of the DNS zone.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--if-match

The etag of the DNSSEC configuration. Omit this value to always overwrite the DNSSEC configuration. Specify the last-seen etag value to prevent accidentally overwriting any concurrent changes.

--if-none-match

Set to '*' to allow this DNSSEC configuration to be created, but to prevent updating existing DNSSEC configuration. Other values will be ignored.

--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az network dns dnssec-config delete

Edit
Experimental

Command group 'az network dns dnssec-config' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Delete the DNSSEC configuration on a DNS zone. This operation cannot be undone.

az network dns dnssec-config delete [--ids]
                                    [--if-match]
                                    [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                    [--resource-group]
                                    [--subscription]
                                    [--yes]
                                    [--zone-name]

Examples

Disable DNSSEC on a zone.

az network dns dnssec-config delete -g MyResourceGroup -z www.mysite.com

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--if-match

The etag of this DNSSEC configuration. Omit this value to always delete the DNSSEC configuration. Specify the last-seen etag value to prevent accidentally deleting any concurrent changes.

--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--yes -y

Do not prompt for confirmation.

Property Value
Default value: False
--zone-name -z

Name of the DNS zone.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az network dns dnssec-config show

Edit
Experimental

Command group 'az network dns dnssec-config' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Get the DNSSEC configuration.

az network dns dnssec-config show [--ids]
                                  [--resource-group]
                                  [--subscription]
                                  [--zone-name]

Examples

Get the DNSSEC configuration on a zone.

az network dns dnssec-config show -g MyResourceGroup -z www.mysite.com

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--zone-name -z

Name of the DNS zone.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az network dns dnssec-config wait

Edit
Experimental

Command group 'az network dns dnssec-config' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Place the CLI in a waiting state until a condition is met.

az network dns dnssec-config wait [--created]
                                  [--custom]
                                  [--deleted]
                                  [--exists]
                                  [--ids]
                                  [--interval]
                                  [--resource-group]
                                  [--subscription]
                                  [--timeout]
                                  [--updated]
                                  [--zone-name]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

Property Value
Parameter group: Wait Condition Arguments
--deleted

Wait until deleted.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--exists

Wait until the resource exists.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--interval

Polling interval in seconds.

Property Value
Parameter group: Wait Condition Arguments
Default value: 30
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--timeout

Maximum wait in seconds.

Property Value
Parameter group: Wait Condition Arguments
Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--zone-name -z

Name of the DNS zone.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False