az network routeserver peering

Manage the route server peering.

Commands

Name	Description	Type	Status
az network routeserver peering create	Create a route server peering.	Core	GA
az network routeserver peering delete	Delete a route server peering.	Core	GA
az network routeserver peering list	List all route server peerings under a resource group.	Core	GA
az network routeserver peering list-advertised-routes	List all routes the route server bgp connection is advertising to the specified peer.	Core	GA
az network routeserver peering list-learned-routes	List all routes the route server bgp connection has learned.	Core	GA
az network routeserver peering show	Show a route server peering.	Core	GA
az network routeserver peering update	Update a route server peering.	Core	GA
az network routeserver peering wait	Place the CLI in a waiting state until a condition is met.	Core	GA

az network routeserver peering create

Create a route server peering.

az network routeserver peering create --name
                                      --resource-group
                                      --routeserver
                                      [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--peer-asn]
                                      [--peer-ip]

Examples

Create a route server peering.

az network routeserver peering create -g MyResourceGroup --routeserver MyRouteServer -n MyRouteServerPeer --peer-asn 11000 --peer-ip 10.0.0.120

Required Parameters

--name -n

The name of the Route Server Peering.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--routeserver

The name of the Route Server.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--peer-asn

Peer ASN. Its range is from 1 to 4294967295.

--peer-ip

Peer IP address.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network routeserver peering delete

Delete a route server peering.

az network routeserver peering delete [--ids]
                                      [--name]
                                      [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--resource-group]
                                      [--routeserver]
                                      [--subscription]
                                      [--yes]

Examples

Delete a route server peering.

az network routeserver peering delete -g MyResourceGroup --routeserver MyRouteServer -n MyRouteServerPeer -y

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name -n

The name of the Route Server Peering.

Property	Value
Parameter group:	Resource Id Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--routeserver

The name of the Route Server.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--yes -y

Do not prompt for confirmation.

Property	Value
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network routeserver peering list

List all route server peerings under a resource group.

az network routeserver peering list --resource-group
                                    --routeserver

Examples

List a route server peering.

az network routeserver peering list -g MyResourceGroup --routeserver MyRouteServer

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--routeserver

The name of the Route Server.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network routeserver peering list-advertised-routes

List all routes the route server bgp connection is advertising to the specified peer.

az network routeserver peering list-advertised-routes [--ids]
                                                      [--name]
                                                      [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                      [--resource-group]
                                                      [--routeserver]
                                                      [--subscription]

Examples

List.

az network routeserver peering list-advertised-routes -g MyResourceGroup --routeserver MyRouteServer -n MyRouteServerPeer

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name -n

The name of the Route Server Peering.

Property	Value
Parameter group:	Resource Id Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--routeserver

The name of the Route Server.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network routeserver peering list-learned-routes

List all routes the route server bgp connection has learned.

az network routeserver peering list-learned-routes [--ids]
                                                   [--name]
                                                   [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                   [--resource-group]
                                                   [--routeserver]
                                                   [--subscription]

Examples

List.

az network routeserver peering list-learned-routes -g MyResourceGroup --routeserver MyRouteServer -n MyRouteServerPeer

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name -n

The name of the Route Server Peering.

Property	Value
Parameter group:	Resource Id Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--routeserver

The name of the Route Server.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network routeserver peering show

Show a route server peering.

az network routeserver peering show [--ids]
                                    [--name]
                                    [--resource-group]
                                    [--routeserver]
                                    [--subscription]

Examples

Show a route server peering.

az network routeserver peering show -g MyResourceGroup --routeserver MyRouteServer -n MyRouteServerPeer

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name -n

The name of the Route Server Peering.

Property	Value
Parameter group:	Resource Id Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--routeserver

The name of the Route Server.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network routeserver peering update

Update a route server peering.

az network routeserver peering update [--add]
                                      [--force-string {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--ids]
                                      [--name]
                                      [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--peer-asn]
                                      [--peer-ip]
                                      [--remove]
                                      [--resource-group]
                                      [--routeserver]
                                      [--set]
                                      [--subscription]

Examples

Update a route server peering.

az network routeserver peering update -g MyResourceGroup --routeserver MyRouteServer -n MyRouteServerPeer --peer-ip 10.0.0.0

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

Property	Value
Parameter group:	Generic Update Arguments

--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Property	Value
Parameter group:	Generic Update Arguments
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name -n

The name of the Route Server Peering.

Property	Value
Parameter group:	Resource Id Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--peer-asn

Peer ASN.

--peer-ip

Peer IP address.

--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

Property	Value
Parameter group:	Generic Update Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--routeserver

The name of the Route Server.

Property	Value
Parameter group:	Resource Id Arguments

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

Property	Value
Parameter group:	Generic Update Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network routeserver peering wait

Place the CLI in a waiting state until a condition is met.

az network routeserver peering wait [--created]
                                    [--custom]
                                    [--deleted]
                                    [--exists]
                                    [--ids]
                                    [--interval]
                                    [--name]
                                    [--resource-group]
                                    [--routeserver]
                                    [--subscription]
                                    [--timeout]
                                    [--updated]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

Property	Value
Parameter group:	Wait Condition Arguments

--deleted

Wait until deleted.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--exists

Wait until the resource exists.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--interval

Polling interval in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	30

--name -n

The name of the Route Server Peering.

Property	Value
Parameter group:	Resource Id Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--routeserver

The name of the Route Server.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--timeout

Maximum wait in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	3600

--updated

Wait until updated with provisioningState at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False