az site-recovery vault

Note

This reference is part of the site-recovery extension for the Azure CLI (version 2.51.0 or higher). The extension will automatically install the first time you run an az site-recovery vault command. Learn more about extensions.

Manage Vault.

Commands

Name	Description	Type	Status
az site-recovery vault health	Manage the health details of the vault.	Extension	GA
az site-recovery vault health refresh-default	Refresh default for the health of the vault.	Extension	GA
az site-recovery vault health show	Get the health details of the vault.	Extension	GA
az site-recovery vault list-appliance	List the list of Azure Site Recovery appliances for the vault.	Extension	GA
az site-recovery vault list-migration-item	Get the list of ASR replication migration items in the vault.	Extension	GA
az site-recovery vault list-network	List the networks available in a vault.	Extension	GA
az site-recovery vault list-network-mapping	List all ASR network mappings in the vault.	Extension	GA
az site-recovery vault list-protected-item	List the list of ASR replication protected items in the vault.	Extension	GA
az site-recovery vault list-protection-container	List the protection containers in a vault.	Extension	GA
az site-recovery vault list-protection-container-mapping	List the protection container mappings in the vault.	Extension	GA
az site-recovery vault list-recovery-services-provider	List the registered recovery services providers in the vault.	Extension	GA
az site-recovery vault list-storage-classification	List the storage classifications in the vault.	Extension	GA
az site-recovery vault list-storage-classification-mapping	List the storage classification mappings in the vault.	Extension	GA
az site-recovery vault list-v-center	List the vCenter servers registered in the vault.	Extension	GA
az site-recovery vault show-supported-operating-system	Show the supported operating system for the vault.	Extension	GA

az site-recovery vault list-appliance

List the list of Azure Site Recovery appliances for the vault.

az site-recovery vault list-appliance --resource-group
                                      --vault-name
                                      [--filter]
                                      [--max-items]
                                      [--next-token]

Examples

list-appliance for vault

az site-recovery vault list-appliance -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--filter

OData filter options.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-migration-item

Get the list of ASR replication migration items in the vault.

az site-recovery vault list-migration-item --resource-group
                                           --vault-name
                                           [--filter]
                                           [--max-items]
                                           [--next-token]
                                           [--skip-token]
                                           [--take-token]

Examples

list-migration-item

az site-recovery vault list-migration-item -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--filter

OData filter options.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

--skip-token

The pagination token.

--take-token

The page size.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-network

List the networks available in a vault.

az site-recovery vault list-network --resource-group
                                    --vault-name
                                    [--max-items]
                                    [--next-token]

Examples

list-network

az site-recovery vault list-network -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-network-mapping

List all ASR network mappings in the vault.

az site-recovery vault list-network-mapping --resource-group
                                            --vault-name
                                            [--max-items]
                                            [--next-token]

Examples

list-network-mapping

az site-recovery vault list-network-mapping -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-protected-item

List the list of ASR replication protected items in the vault.

az site-recovery vault list-protected-item --resource-group
                                           --vault-name
                                           [--filter]
                                           [--max-items]
                                           [--next-token]
                                           [--skip-token]

Examples

list-protected-item

az site-recovery vault list-protected-item -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--filter

OData filter options.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

--skip-token

The pagination token. Possible values: "FabricId" or "FabricId_CloudId" or null.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-protection-container

List the protection containers in a vault.

az site-recovery vault list-protection-container --resource-group
                                                 --vault-name
                                                 [--max-items]
                                                 [--next-token]

Examples

list-protection-container

az site-recovery vault list-protection-container -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-protection-container-mapping

List the protection container mappings in the vault.

az site-recovery vault list-protection-container-mapping --resource-group
                                                         --vault-name
                                                         [--max-items]
                                                         [--next-token]

Examples

list-protection-container-mapping

az site-recovery vault list-protection-container-mapping -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-recovery-services-provider

List the registered recovery services providers in the vault.

az site-recovery vault list-recovery-services-provider --resource-group
                                                       --vault-name
                                                       [--max-items]
                                                       [--next-token]

Examples

list-recovery-services-provider

az site-recovery vault list-recovery-services-provider -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-storage-classification

List the storage classifications in the vault.

az site-recovery vault list-storage-classification --resource-group
                                                   --vault-name
                                                   [--max-items]
                                                   [--next-token]

Examples

list-storage-classification

az site-recovery vault list-storage-classification -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-storage-classification-mapping

List the storage classification mappings in the vault.

az site-recovery vault list-storage-classification-mapping --resource-group
                                                           --vault-name
                                                           [--max-items]
                                                           [--next-token]

Examples

list-storage-classification-mapping

az site-recovery vault list-storage-classification-mapping -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault list-v-center

List the vCenter servers registered in the vault.

az site-recovery vault list-v-center --resource-group
                                     --vault-name
                                     [--max-items]
                                     [--next-token]

Examples

list-v-center

az site-recovery vault list-v-center -g rg --vault-name vault_name

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vault-name

The name of the recovery services vault.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az site-recovery vault show-supported-operating-system

Show the supported operating system for the vault.

az site-recovery vault show-supported-operating-system [--ids]
                                                       [--instance-type]
                                                       [--resource-group]
                                                       [--subscription]
                                                       [--vault-name]

Examples

show-supported-operating-system

az site-recovery vault show-supported-operating-system -g rg --vault-name vault_name

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--instance-type

The instance type.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--vault-name

The name of the recovery services vault.

Property	Value
Parameter group:	Resource Id Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False