CustomXmlDelRangeEnd Class

Definition

Namespace:

DocumentFormat.OpenXml.Wordprocessing

Assembly:

DocumentFormat.OpenXml.dll

Package:

DocumentFormat.OpenXml v3.0.1

Defines the CustomXmlDelRangeEnd Class.

This class is available in Office 2007 and above.

When the object is serialized out as xml, it's qualified name is w:customXmlDelRangeEnd.

public class CustomXmlDelRangeEnd : DocumentFormat.OpenXml.Wordprocessing.MarkupType

type CustomXmlDelRangeEnd = class
    inherit MarkupType

Public Class CustomXmlDelRangeEnd
Inherits MarkupType

Inheritance

Object

OpenXmlElement

OpenXmlLeafElement

MarkupType

CustomXmlDelRangeEnd

Remarks

[ISO/IEC 29500-1 1st Edition]

customXmlDelRangeEnd (Custom XML Markup Deletion End)

This element specifies the end of a region in which custom XML markup has been deleted and tracked as a revision. The id attribute on this element shall be used to link this element with the corresponding custom XML markup deletion start marker in the document.

Providing a physical representation of custom XML markup results in regions which can be inserted and deleted, but cannot be encapsulated by a single revision element, since their representation in WordprocessingML is the start or end XML tag for the custom XML markup which it represents. Therefore, the start/end "cross structure" annotation format surrounds the WordprocessingML region to which this deletion applies.

The following restrictions shall be applied to this element:

• If this element occurs without a corresponding customXmlDelRangeStart element (§17.13.5.5) with a matching id attribute value, then the document is non-conformant .

• If this element and its paired start encapsulate a range with no custom XML markup, then the document is non-conformant .

• If multiple end elements exist with the same id attribute value, then the document is non-conformant .

[Example: Consider a document with two inline custom XML markup elements, as follows:

<w:p>  
  <w:customXml … >  
    <w:customXml … >  
      <w:r>  
        <w:t>Text.</w:t>  
      </w:r>  
    </w:customXml>  
  </w:customXml>  
  <w:r>  
    <w:t>More text.</w:t>  
  </w:r>  
</w:p>  

Now, if each custom XML markup element's start and end tag have a physical representation, imagine that the region from the start of the paragraph until the point between the two end points is deleted with revisions enabled. This revision cannot be encapsulated by one del element, since it starts outside of the first custom XML markup element and ends just inside of it, so it must be done using the custom XML markup revision "cross structure" syntax, as follows:

<w:p>  
  <w:customXmlDelRangeStart w:id="0" w:author="Devan" />  
  <w:customXml … >  
    <w:customXml … >  
      <w:del … >  
        <w:r>  
          <w:delText>Text.</w:delText>  
        </w:r>  
      </w:del>  
    </w:customXml>  
    <w:customXmlDelRangeEnd w:id="0" />  
  </w:customXml>  
  <w:r>  
    <w:t>More text.</w:t>  
  </w:r>  
</w:p>  

The customXmlDelRangeEnd element delimits the end of the region in which all custom XML elements have been deleted with revisions enabled, and the del element (§17.13.5.14) handles the deletion of the text performed by this revision. Since the end of the outer customXml element was not in the deleted range, it is not revision marked deleted, but the corresponding physical character for the start element is. end example]

Parent Elements

bdo (§17.3.2.3); body (§17.2.2); comment (§17.13.4.2); customXml (§17.5.1.6); customXml (§17.5.1.4); customXml (§17.5.1.5); customXml (§17.5.1.3); deg (§22.1.2.26); del (§17.13.5.14); den (§22.1.2.28); dir (§17.3.2.8); docPartBody (§17.12.6); e (§22.1.2.32); endnote (§17.11.2); fldSimple (§17.16.19); fName (§22.1.2.37); footnote (§17.11.10); ftr (§17.10.3); hdr (§17.10.4); hyperlink (§17.16.22); ins (§17.13.5.18); lim (§22.1.2.52); moveFrom (§17.13.5.22); moveTo (§17.13.5.25); num (§22.1.2.75); oMath (§22.1.2.77); p (§17.3.1.22); rt (§17.3.3.24); rubyBase (§17.3.3.27); sdtContent (§17.5.2.34); sdtContent (§17.5.2.33); sdtContent (§17.5.2.35); sdtContent (§17.5.2.36); smartTag (§17.5.1.9); sub (§22.1.2.112); sup (§22.1.2.114); tbl (§17.4.38); tc (§17.4.66); tr (§17.4.79)

[Note: The W3C XML Schema definition of this element’s content model (CT_Markup) is located in §A.1. end note]

� ISO/IEC29500: 2008.

Constructors

CustomXmlDelRangeEnd()

Initializes a new instance of the CustomXmlDelRangeEnd class.

Properties

ChildElements	Gets all the child nodes of the current element. (Inherited from OpenXmlElement)
ExtendedAttributes	Gets all extended attributes (attributes not defined in the schema) of the current element. (Inherited from OpenXmlElement)
Features	Gets a IFeatureCollection for the current element. This feature collection will be read-only, but will inherit features from its parent part and package if available. (Inherited from OpenXmlElement)
FirstChild	Gets the first child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element. (Inherited from OpenXmlElement)
HasAttributes	Gets a value indicating whether the current element has any attributes. (Inherited from OpenXmlElement)
HasChildren	Gets a value that indicates whether the current element has any child elements. (Inherited from OpenXmlLeafElement)
Id	Annotation Identifier Represents the following attribute in the schema: w:id (Inherited from MarkupType)
InnerText	Gets or sets the concatenated values of the node and all of its children. (Inherited from OpenXmlElement)
InnerXml	Gets or sets the markup that only represents child elements of the current element. (Inherited from OpenXmlLeafElement)
LastChild	Gets the last child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element. (Inherited from OpenXmlElement)
LocalName	Gets the local name of the current element. (Inherited from OpenXmlElement)
MCAttributes	Gets or sets the markup compatibility attributes. Returns null if no markup compatibility attributes are defined for the current element. (Inherited from OpenXmlElement)
NamespaceDeclarations	Gets all the namespace declarations defined in the current element. Returns an empty enumerator if there is no namespace declaration. (Inherited from OpenXmlElement)
NamespaceUri	Gets the namespace URI of the current element. (Inherited from OpenXmlElement)
OpenXmlElementContext	Gets the OpenXmlElementContext of the current element. (Inherited from OpenXmlElement)
OuterXml	Gets the markup that represents the current element and all of its child elements. (Inherited from OpenXmlElement)
Parent	Gets the parent element of the current element. (Inherited from OpenXmlElement)
Prefix	Gets the namespace prefix of current element. (Inherited from OpenXmlElement)
XmlQualifiedName	Gets the qualified name of the current element. (Inherited from OpenXmlElement)
XName	Gets the qualified name of the current element. (Inherited from OpenXmlElement)

Methods

AddAnnotation(Object)	Adds an object to the current OpenXmlElement element's list of annotations. (Inherited from OpenXmlElement)
AddNamespaceDeclaration(String, String)	Adds a namespace declaration to the current node. (Inherited from OpenXmlElement)
Ancestors()	Enumerates all of the current element's ancestors. (Inherited from OpenXmlElement)
Ancestors<T>()	Enumerates only the current element's ancestors that have the specified type. (Inherited from OpenXmlElement)
Annotation(Type)	Get the first annotation object of the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
Annotation<T>()	Get the first annotation object of the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
Annotations(Type)	Gets a collection of annotations with the specified type for the current OpenXmlElement element. (Inherited from OpenXmlElement)
Annotations<T>()	Gets a collection of annotations with the specified type for the current OpenXmlElement element. (Inherited from OpenXmlElement)
Append(IEnumerable<OpenXmlElement>)	Appends each element from a list of elements to the end of the current element's list of child elements. (Inherited from OpenXmlElement)
Append(OpenXmlElement[])	Appends each element from an array of elements to the end of the current element's list of child elements. (Inherited from OpenXmlElement)
AppendChild<T>(T)	Appends the specified element to the end of the current element's list of child nodes. (Inherited from OpenXmlElement)
ClearAllAttributes()	Clears all of the attributes, including both known attributes and extended attributes. (Inherited from OpenXmlElement)
Clone()	Creates a duplicate of the current node. (Inherited from OpenXmlElement)
CloneNode(Boolean)	Creates a duplicate of this node.
Descendants()	Enumerates all of the current element's descendants. (Inherited from OpenXmlElement)
Descendants<T>()	Enumerate all of the current element's descendants of type T. (Inherited from OpenXmlElement)
Elements()	Enumerates all of the current element's children. (Inherited from OpenXmlElement)
Elements<T>()	Enumerates only the current element's children that have the specified type. (Inherited from OpenXmlElement)
ElementsAfter()	Enumerates all of the sibling elements that follow the current element and have the same parent as the current element. (Inherited from OpenXmlElement)
ElementsBefore()	Enumerates all of the sibling elements that precede the current element and have the same parent as the current element. (Inherited from OpenXmlElement)
GetAttribute(String, String)	Gets an Open XML attribute with the specified tag name and namespace URI. (Inherited from OpenXmlElement)
GetAttributes()	Gets a list that contains a copy of all the attributes. (Inherited from OpenXmlElement)
GetEnumerator()	Returns an enumerator that iterates through the child collection. (Inherited from OpenXmlElement)
GetFirstChild<T>()	Finds the first child element in type T. (Inherited from OpenXmlElement)
InsertAfter<T>(T, OpenXmlElement)	Inserts the specified element immediately after the specified reference element. (Inherited from OpenXmlElement)
InsertAfterSelf<T>(T)	Inserts the specified element immediately after the current element. (Inherited from OpenXmlElement)
InsertAt<T>(T, Int32)	Inserts the specified element at the specified index in the current element's list of child elements. (Inherited from OpenXmlElement)
InsertBefore<T>(T, OpenXmlElement)	Inserts the specified element immediately before the specified reference element. (Inherited from OpenXmlElement)
InsertBeforeSelf<T>(T)	Inserts the specified element immediately before the current element. (Inherited from OpenXmlElement)
IsAfter(OpenXmlElement)	Determines if the current element appears after a specified element in document order. (Inherited from OpenXmlElement)
IsBefore(OpenXmlElement)	Determines if the current element appears before a specified element in document order. (Inherited from OpenXmlElement)
LookupNamespace(String)	Resolves the namespace prefix in the context of the current node. (Inherited from OpenXmlElement)
LookupPrefix(String)	Finds the corresponding prefix for a namespace uri in the current element scope. (Inherited from OpenXmlElement)
NextSibling()	Gets the OpenXmlElement element that immediately follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement element. (Inherited from OpenXmlElement)
NextSibling<T>()	Gets the OpenXmlElement element with the specified type that follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement. (Inherited from OpenXmlElement)
PrependChild<T>(T)	Inserts the specified element at the beginning of the current element's list of child elements. (Inherited from OpenXmlElement)
PreviousSibling()	Gets the OpenXmlElement element that immediately precedes the current OpenXmlElement element. Returns null (Nothing in Visual Basic ) if there is no preceding OpenXmlElement element. (Inherited from OpenXmlElement)
PreviousSibling<T>()	Gets the OpenXmlElement element with the specified type that precedes the current OpenXmlElement. Returns null (Nothing in Visual Basic) if there is no preceding OpenXmlElement element. (Inherited from OpenXmlElement)
Remove()	Removes the current element from its parent. (Inherited from OpenXmlElement)
RemoveAllChildren()	Removes all child elements of the current element. (Inherited from OpenXmlLeafElement)
RemoveAllChildren<T>()	Remove all of the current element's child elements that are of type T. (Inherited from OpenXmlElement)
RemoveAnnotations(Type)	Removes the annotations of the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
RemoveAnnotations<T>()	Removes the annotations with the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
RemoveAttribute(String, String)	Removes the attribute from the current element. (Inherited from OpenXmlElement)
RemoveChild<T>(T)	Removes the specified child element from the current element's list of child elements. (Inherited from OpenXmlElement)
RemoveNamespaceDeclaration(String)	Removes the namespace declaration for the specified prefix. Removes nothing if there is no prefix. (Inherited from OpenXmlElement)
ReplaceChild<T>(OpenXmlElement, T)	Replaces a child element with another child element in the current element's list of child elements. (Inherited from OpenXmlElement)
SetAttribute(OpenXmlAttribute)	Sets an attribute to the specified element. If the attribute is a known attribute, the value of the attribute is set. If the attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list. (Inherited from OpenXmlElement)
SetAttributes(IEnumerable<OpenXmlAttribute>)	Sets a number of attributes to the element. If an attribute is a known attribute, the value of the attribute is set. If an attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list. (Inherited from OpenXmlElement)
WriteTo(XmlWriter)	Saves the current node to the specified XmlWriter. (Inherited from OpenXmlElement)

Explicit Interface Implementations

IEnumerable.GetEnumerator()	(Inherited from OpenXmlElement)
IEnumerable<OpenXmlElement>.GetEnumerator()	Returns an enumerator that iterates through the child collection. (Inherited from OpenXmlElement)