Graphics.FillClosedCurve Method
Definition
Important
Some information relates to prerelease product that may be substantially modified before it’s released. Microsoft makes no warranties, express or implied, with respect to the information provided here.
Fills the interior of a closed cardinal spline curve defined by an array of Point structures.
Overloads
FillClosedCurve(Brush, Point[]) |
Fills the interior of a closed cardinal spline curve defined by an array of Point structures. |
FillClosedCurve(Brush, PointF[]) |
Fills the interior of a closed cardinal spline curve defined by an array of PointF structures. |
FillClosedCurve(Brush, ReadOnlySpan<Point>) | |
FillClosedCurve(Brush, ReadOnlySpan<PointF>) | |
FillClosedCurve(Brush, Point[], FillMode) |
Fills the interior of a closed cardinal spline curve defined by an array of Point structures using the specified fill mode. |
FillClosedCurve(Brush, PointF[], FillMode) |
Fills the interior of a closed cardinal spline curve defined by an array of PointF structures using the specified fill mode. |
FillClosedCurve(Brush, ReadOnlySpan<Point>, FillMode) | |
FillClosedCurve(Brush, ReadOnlySpan<PointF>, FillMode) | |
FillClosedCurve(Brush, Point[], FillMode, Single) |
Fills the interior of a closed cardinal spline curve defined by an array of Point structures using the specified fill mode and tension. |
FillClosedCurve(Brush, PointF[], FillMode, Single) |
Fills the interior of a closed cardinal spline curve defined by an array of PointF structures using the specified fill mode and tension. |
FillClosedCurve(Brush, ReadOnlySpan<Point>, FillMode, Single) | |
FillClosedCurve(Brush, ReadOnlySpan<PointF>, FillMode, Single) |
FillClosedCurve(Brush, Point[])
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
Fills the interior of a closed cardinal spline curve defined by an array of Point structures.
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points);
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::Point> ^ points);
public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.Point[] points);
public void FillClosedCurve (System.Drawing.Brush brush, params System.Drawing.Point[] points);
member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.Point[] -> unit
Public Sub FillClosedCurve (brush As Brush, points As Point())
Public Sub FillClosedCurve (brush As Brush, ParamArray points As Point())
Parameters
Exceptions
Examples
The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e
, which is a parameter of the Paint event handler. The code performs the following actions:
Creates a solid red brush.
Creates an array of four points to define a spline.
Fills the curve on the screen.
The curve has a default tension of 0.5.
public:
void FillClosedCurvePoint( PaintEventArgs^ e )
{
// Create solid brush.
SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );
//Create array of points for curve.
Point point1 = Point(100,100);
Point point2 = Point(200,50);
Point point3 = Point(250,200);
Point point4 = Point(50,150);
array<Point>^ points = {point1,point2,point3,point4};
// Fill curve on screen.
e->Graphics->FillClosedCurve( redBrush, points );
}
public void FillClosedCurvePoint(PaintEventArgs e)
{
// Create solid brush.
SolidBrush redBrush = new SolidBrush(Color.Red);
//Create array of points for curve.
Point point1 = new Point(100, 100);
Point point2 = new Point(200, 50);
Point point3 = new Point(250, 200);
Point point4 = new Point(50, 150);
Point[] points = {point1, point2, point3, point4};
// Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points);
}
Public Sub FillClosedCurvePoint(ByVal e As PaintEventArgs)
' Create solid brush.
Dim redBrush As New SolidBrush(Color.Red)
'Create array of points for curve.
Dim point1 As New Point(100, 100)
Dim point2 As New Point(200, 50)
Dim point3 As New Point(250, 200)
Dim point4 As New Point(50, 150)
Dim points As Point() = {point1, point2, point3, point4}
' Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points)
End Sub
Remarks
This method fills the interior of a closed cardinal spline that passes through each point in the array. If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close it.
The array of points must contain at least four Point structures.
This method uses a default tension of 0.5.
Applies to
FillClosedCurve(Brush, PointF[])
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
Fills the interior of a closed cardinal spline curve defined by an array of PointF structures.
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points);
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::PointF> ^ points);
public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.PointF[] points);
public void FillClosedCurve (System.Drawing.Brush brush, params System.Drawing.PointF[] points);
member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.PointF[] -> unit
Public Sub FillClosedCurve (brush As Brush, points As PointF())
Public Sub FillClosedCurve (brush As Brush, ParamArray points As PointF())
Parameters
Exceptions
Examples
The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e
, which is a parameter of the Paint event handler. The code performs the following actions:
Creates a solid red brush.
Creates an array of four points to define a spline.
Fills the curve on the screen.
The curve has a default tension of 0.5.
public:
void FillClosedCurvePointF( PaintEventArgs^ e )
{
// Create solid brush.
SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );
//Create array of points for curve.
PointF point1 = PointF(100.0F,100.0F);
PointF point2 = PointF(200.0F,50.0F);
PointF point3 = PointF(250.0F,200.0F);
PointF point4 = PointF(50.0F,150.0F);
array<PointF>^ points = {point1,point2,point3,point4};
// Fill curve on screen.
e->Graphics->FillClosedCurve( redBrush, points );
}
public void FillClosedCurvePointF(PaintEventArgs e)
{
// Create solid brush.
SolidBrush redBrush = new SolidBrush(Color.Red);
//Create array of points for curve.
PointF point1 = new PointF(100.0F, 100.0F);
PointF point2 = new PointF(200.0F, 50.0F);
PointF point3 = new PointF(250.0F, 200.0F);
PointF point4 = new PointF(50.0F, 150.0F);
PointF[] points = {point1, point2, point3, point4};
// Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points);
}
Public Sub FillClosedCurvePointF(ByVal e As PaintEventArgs)
' Create solid brush.
Dim redBrush As New SolidBrush(Color.Red)
'Create array of points for curve.
Dim point1 As New PointF(100.0F, 100.0F)
Dim point2 As New PointF(200.0F, 50.0F)
Dim point3 As New PointF(250.0F, 200.0F)
Dim point4 As New PointF(50.0F, 150.0F)
Dim points As PointF() = {point1, point2, point3, point4}
' Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points)
End Sub
Remarks
This method fills the interior of a closed cardinal spline that passes through each point in the array. If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close it.
The array of points must contain at least four PointF structures.
This method uses a default tension of 0.5.
Applies to
FillClosedCurve(Brush, ReadOnlySpan<Point>)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points);
public void FillClosedCurve (System.Drawing.Brush brush, scoped ReadOnlySpan<System.Drawing.Point> points);
member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> -> unit
Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of Point))
Parameters
- brush
- Brush
- points
- ReadOnlySpan<Point>
Applies to
FillClosedCurve(Brush, ReadOnlySpan<PointF>)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points);
public void FillClosedCurve (System.Drawing.Brush brush, scoped ReadOnlySpan<System.Drawing.PointF> points);
member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> -> unit
Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of PointF))
Parameters
- brush
- Brush
- points
- ReadOnlySpan<PointF>
Applies to
FillClosedCurve(Brush, Point[], FillMode)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
Fills the interior of a closed cardinal spline curve defined by an array of Point structures using the specified fill mode.
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillmode);
public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillmode);
member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillClosedCurve (brush As Brush, points As Point(), fillmode As FillMode)
Parameters
Exceptions
Examples
The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e
, which is a parameter of the Paint event handler. The code performs the following actions:
Creates a solid red brush.
Creates an array of four points to define a spline.
Sets the fill mode to Winding.
Fills the curve on the screen.
The curve has a default tension of 0.5.
public:
void FillClosedCurvePointFillMode( PaintEventArgs^ e )
{
// Create solid brush.
SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );
//Create array of points for curve.
Point point1 = Point(100,100);
Point point2 = Point(200,50);
Point point3 = Point(250,200);
Point point4 = Point(50,150);
array<Point>^ points = {point1,point2,point3,point4};
// Set fill mode.
FillMode newFillMode = FillMode::Winding;
// Fill curve on screen.
e->Graphics->FillClosedCurve( redBrush, points, newFillMode );
}
public void FillClosedCurvePointFillMode(PaintEventArgs e)
{
// Create solid brush.
SolidBrush redBrush = new SolidBrush(Color.Red);
//Create array of points for curve.
Point point1 = new Point(100, 100);
Point point2 = new Point(200, 50);
Point point3 = new Point(250, 200);
Point point4 = new Point(50, 150);
Point[] points = {point1, point2, point3, point4};
// Set fill mode.
FillMode newFillMode = FillMode.Winding;
// Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points, newFillMode);
}
Public Sub FillClosedCurvePointFillMode(ByVal e As PaintEventArgs)
' Create solid brush.
Dim redBrush As New SolidBrush(Color.Red)
'Create array of points for curve.
Dim point1 As New Point(100, 100)
Dim point2 As New Point(200, 50)
Dim point3 As New Point(250, 200)
Dim point4 As New Point(50, 150)
Dim points As Point() = {point1, point2, point3, point4}
' Set fill mode.
Dim newFillMode As FillMode = FillMode.Winding
' Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points, newFillMode)
End Sub
Remarks
This method fills the interior of a closed cardinal spline that passes through each point in the array. If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close it.
The array of points must contain at least four Point structures.
This method uses a default tension of 0.5.
Applies to
FillClosedCurve(Brush, PointF[], FillMode)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
Fills the interior of a closed cardinal spline curve defined by an array of PointF structures using the specified fill mode.
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillmode);
public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillmode);
member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillClosedCurve (brush As Brush, points As PointF(), fillmode As FillMode)
Parameters
Exceptions
Examples
The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e
, which is a parameter of the Paint event handler. The code performs the following actions:
Creates a solid red brush.
Creates an array of four points to define a spline.
Sets the fill mode to Winding.
Fills the curve on the screen.
The curve has a default tension of 0.5.
public:
void FillClosedCurvePointFFillMode( PaintEventArgs^ e )
{
// Create solid brush.
SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );
// Create array of points for curve.
PointF point1 = PointF(100.0F,100.0F);
PointF point2 = PointF(200.0F,50.0F);
PointF point3 = PointF(250.0F,200.0F);
PointF point4 = PointF(50.0F,150.0F);
array<PointF>^ points = {point1,point2,point3,point4};
// Set fill mode.
FillMode newFillMode = FillMode::Winding;
// Fill curve on screen.
e->Graphics->FillClosedCurve( redBrush, points, newFillMode );
}
public void FillClosedCurvePointFFillMode(PaintEventArgs e)
{
// Create solid brush.
SolidBrush redBrush = new SolidBrush(Color.Red);
// Create array of points for curve.
PointF point1 = new PointF(100.0F, 100.0F);
PointF point2 = new PointF(200.0F, 50.0F);
PointF point3 = new PointF(250.0F, 200.0F);
PointF point4 = new PointF(50.0F, 150.0F);
PointF[] points = {point1, point2, point3, point4};
// Set fill mode.
FillMode newFillMode = FillMode.Winding;
// Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points, newFillMode);
}
Public Sub FillClosedCurvePointFFillMode(ByVal e As PaintEventArgs)
' Create solid brush.
Dim redBrush As New SolidBrush(Color.Red)
' Create array of points for curve.
Dim point1 As New PointF(100.0F, 100.0F)
Dim point2 As New PointF(200.0F, 50.0F)
Dim point3 As New PointF(250.0F, 200.0F)
Dim point4 As New PointF(50.0F, 150.0F)
Dim points As PointF() = {point1, point2, point3, point4}
' Set fill mode.
Dim newFillMode As FillMode = FillMode.Winding
' Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points, newFillMode)
End Sub
Remarks
This method fills the interior of a closed cardinal spline that passes through each point in the array. If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close it.
The array of points must contain at least four Point structures.
This method uses a default tension of 0.5.
Applies to
FillClosedCurve(Brush, ReadOnlySpan<Point>, FillMode)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points, System::Drawing::Drawing2D::FillMode fillmode);
public void FillClosedCurve (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.Point> points, System.Drawing.Drawing2D.FillMode fillmode);
member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of Point), fillmode As FillMode)
Parameters
- brush
- Brush
- points
- ReadOnlySpan<Point>
- fillmode
- FillMode
Applies to
FillClosedCurve(Brush, ReadOnlySpan<PointF>, FillMode)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points, System::Drawing::Drawing2D::FillMode fillmode);
public void FillClosedCurve (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.PointF> points, System.Drawing.Drawing2D.FillMode fillmode);
member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of PointF), fillmode As FillMode)
Parameters
- brush
- Brush
- points
- ReadOnlySpan<PointF>
- fillmode
- FillMode
Applies to
FillClosedCurve(Brush, Point[], FillMode, Single)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
Fills the interior of a closed cardinal spline curve defined by an array of Point structures using the specified fill mode and tension.
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillmode, float tension);
public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillmode, float tension);
member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode * single -> unit
Public Sub FillClosedCurve (brush As Brush, points As Point(), fillmode As FillMode, tension As Single)
Parameters
- tension
- Single
Value greater than or equal to 0.0F that specifies the tension of the curve.
Exceptions
Examples
The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e
, which is a parameter of the Paint event handler. The code performs the following actions:
Creates a solid red brush.
Creates an array of four points to define a spline.
Sets the fill mode to Winding.
Sets the tension to 1.0.
Fills the curve on the screen.
public:
void FillClosedCurvePointFillModeTension( PaintEventArgs^ e )
{
// Create solid brush.
SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );
// Create array of points for curve.
Point point1 = Point(100,100);
Point point2 = Point(200,50);
Point point3 = Point(250,200);
Point point4 = Point(50,150);
array<Point>^ points = {point1,point2,point3,point4};
// Set fill mode.
FillMode newFillMode = FillMode::Winding;
// Set tension.
float tension = 1.0F;
// Fill curve on screen.
e->Graphics->FillClosedCurve( redBrush, points, newFillMode, tension );
}
public void FillClosedCurvePointFillModeTension(PaintEventArgs e)
{
// Create solid brush.
SolidBrush redBrush = new SolidBrush(Color.Red);
// Create array of points for curve.
Point point1 = new Point(100, 100);
Point point2 = new Point(200, 50);
Point point3 = new Point(250, 200);
Point point4 = new Point(50, 150);
Point[] points = {point1, point2, point3, point4};
// Set fill mode.
FillMode newFillMode = FillMode.Winding;
// Set tension.
float tension = 1.0F;
// Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension);
}
Public Sub FillClosedCurvePointFillModeTension(ByVal e As PaintEventArgs)
' Create solid brush.
Dim redBrush As New SolidBrush(Color.Red)
' Create array of points for curve.
Dim point1 As New Point(100, 100)
Dim point2 As New Point(200, 50)
Dim point3 As New Point(250, 200)
Dim point4 As New Point(50, 150)
Dim points As Point() = {point1, point2, point3, point4}
' Set fill mode.
Dim newFillMode As FillMode = FillMode.Winding
' Set tension.
Dim tension As Single = 1.0F
' Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension)
End Sub
Remarks
This method fills the interior of a closed cardinal spline that passes through each point in the array. If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close it.
The array of points must contain at least four Point structures.
The tension
parameter determines the shape of the spline. If the value of the tension
parameter is 0.0F, this method draws straight line segments to connect the points. Usually, the tension
parameter is less than or equal to 1.0F. Values over 1.0F produce unusual results.
Applies to
FillClosedCurve(Brush, PointF[], FillMode, Single)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
- Source:
- Graphics.cs
Fills the interior of a closed cardinal spline curve defined by an array of PointF structures using the specified fill mode and tension.
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillmode, float tension);
public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillmode, float tension);
member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode * single -> unit
Public Sub FillClosedCurve (brush As Brush, points As PointF(), fillmode As FillMode, tension As Single)
Parameters
- tension
- Single
Value greater than or equal to 0.0F that specifies the tension of the curve.
Exceptions
Examples
The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e
, which is a parameter of the Paint event handler. The code performs the following actions:
Creates a solid red brush.
Creates an array of four points to define a spline.
Sets the fill mode to Winding.
Sets the tension to 1.0.
Fills the curve on the screen.
public:
void FillClosedCurvePointFFillModeTension( PaintEventArgs^ e )
{
// Create solid brush.
SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );
// Create array of points for curve.
PointF point1 = PointF(100.0F,100.0F);
PointF point2 = PointF(200.0F,50.0F);
PointF point3 = PointF(250.0F,200.0F);
PointF point4 = PointF(50.0F,150.0F);
array<PointF>^ points = {point1,point2,point3,point4};
// Set fill mode.
FillMode newFillMode = FillMode::Winding;
// Set tension.
float tension = 1.0F;
// Fill curve on screen.
e->Graphics->FillClosedCurve( redBrush, points, newFillMode, tension );
}
public void FillClosedCurvePointFFillModeTension(PaintEventArgs e)
{
// Create solid brush.
SolidBrush redBrush = new SolidBrush(Color.Red);
// Create array of points for curve.
PointF point1 = new PointF(100.0F, 100.0F);
PointF point2 = new PointF(200.0F, 50.0F);
PointF point3 = new PointF(250.0F, 200.0F);
PointF point4 = new PointF(50.0F, 150.0F);
PointF[] points = {point1, point2, point3, point4};
// Set fill mode.
FillMode newFillMode = FillMode.Winding;
// Set tension.
float tension = 1.0F;
// Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension);
}
Public Sub FillClosedCurvePointFFillModeTension(ByVal e As PaintEventArgs)
' Create solid brush.
Dim redBrush As New SolidBrush(Color.Red)
' Create array of points for curve.
Dim point1 As New PointF(100.0F, 100.0F)
Dim point2 As New PointF(200.0F, 50.0F)
Dim point3 As New PointF(250.0F, 200.0F)
Dim point4 As New PointF(50.0F, 150.0F)
Dim points As PointF() = {point1, point2, point3, point4}
' Set fill mode.
Dim newFillMode As FillMode = FillMode.Winding
' Set tension.
Dim tension As Single = 1.0F
' Fill curve on screen.
e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension)
End Sub
Remarks
This method fills the interior of a closed cardinal spline that passes through each point in the array. If the last point does not match the first point, an additional curve segment is added from the last point to the first point to close it.
The array of points must contain at least four Point structures.
The tension
parameter determines the shape of the spline. If the value of the tension
parameter is 0.0F, this method draws straight line segments to connect the points. Usually, the tension
parameter is less than or equal to 1.0F. Values over 1.0F produce unusual results.
Applies to
FillClosedCurve(Brush, ReadOnlySpan<Point>, FillMode, Single)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points, System::Drawing::Drawing2D::FillMode fillmode, float tension);
public void FillClosedCurve (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.Point> points, System.Drawing.Drawing2D.FillMode fillmode, float tension);
member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> * System.Drawing.Drawing2D.FillMode * single -> unit
Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of Point), fillmode As FillMode, tension As Single)
Parameters
- brush
- Brush
- points
- ReadOnlySpan<Point>
- fillmode
- FillMode
- tension
- Single
Applies to
FillClosedCurve(Brush, ReadOnlySpan<PointF>, FillMode, Single)
- Source:
- Graphics.cs
- Source:
- Graphics.cs
public:
void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points, System::Drawing::Drawing2D::FillMode fillmode, float tension);
public void FillClosedCurve (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.PointF> points, System.Drawing.Drawing2D.FillMode fillmode, float tension);
member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> * System.Drawing.Drawing2D.FillMode * single -> unit
Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of PointF), fillmode As FillMode, tension As Single)
Parameters
- brush
- Brush
- points
- ReadOnlySpan<PointF>
- fillmode
- FillMode
- tension
- Single