Work with VAT on Sales and Purchases

If your country or region requires you to calculate and report value-added tax (VAT) on sales and purchase transactions, you can set up Business Central to calculate VAT. For more information, see Setting Up to Calculations and Posting Methods for Value-Added Tax.

There are, however, some VAT-related tasks that you can do manually. For example, you might need to correct a posted amount if you discover that a vendor uses a different rounding method.

Tip

You can let Business Central validate VAT registration numbers and other company information when you create or update documents. For more information, see Validate VAT Registration Numbers.

Calculating and displaying VAT amounts on sales and purchase documents

When you choose an item number in the No. field on a sales or purchase document, Business Central fills in the Unit Price and Line Amount fields. The unit price comes from either the Item card or the item prices allowed for the item and customer. Business Central calculates the line amount when you enter a quantity for the line.

If you want the unit prices and line amounts to include VAT, for example, if you are selling to retail consumers, choose the Prices Including VAT check box on the document. For more information, see Including or Excluding VAT in Prices and Line Amounts.

You can calculate and display VAT amounts in sales and purchase documents differently, depending on the type of customer or vendor you're dealing with. You can also change the calculated VAT amount manually, for example, so that it matches the VAT amount calculated by your vendor on a given transaction.

Including or excluding VAT in prices and line amounts

If you choose the Prices Including VAT checkbox on a sales document, the Unit Price and Line Amount fields will include VAT. By default, the values in these fields do not include VAT. The names of the fields reflect whether prices include VAT.

You can set up the default setting of the Prices Including VAT for all sales documents for a customer in the Prices Including VAT field on the Customer card. You can also set up item prices to include or exclude VAT. Typically, prices on the Item Card will exclude VAT.

The following table provides an overview of how application calculates the unit price amounts for a sales document when you have not set up prices on the Sales Prices page:

Price Includes VAT field on Item Card Prices Including VAT field Action Performed
Not Enabled Not Enabled The Unit Price on the Item Card is copied to Unit Price Excl. VAT field on the sales lines.
Not Enabled Enabled The application calculates the VAT amount per unit and adds to the Unit Price on the Item Card. This total unit price is then entered in the Unit Price Incl. VAT field on the sales lines.
Enabled Not Enabled The application calculates the VAT amount included in the Unit Price field on the Item Card using the VAT percentage related to the VAT Bus. Posting Gr. (Price) and the VAT Prod. Posting Group combination. The Unit Price on the Item Card, reduced by the VAT amount, is then entered in the Unit Price Excl. VAT field in the sales lines. For more information, see Using VAT Business Posting Groups and Customer Price Groups.
Enabled Enabled The Unit Price on the Item Card is copied to Unit Price Incl. VAT field on the sales lines.

Using VAT business posting groups and customer price groups

If you want prices to include VAT, you can use VAT business posting groups to calculate the amount based on the VAT posting setup for the group. For more information, see Set up VAT business posting groups.

Depending on what you want to do, you can assign a VAT business posting group to customers or sales documents in the following ways:

  • To use the same VAT rate for all customers, you can choose a group in the VAT Business Posting Group (Price) field on the Sales & Receivables Setup page.
  • To use a VAT rate for a specific customer, you can choose a group in the VAT Business Posting Group (Price) field on the Customer Card page.
  • To use a VAT rate for a specific of customers, You can choose a group in the VAT Business Posting Group (Price) field on the Customer Price Group page. For example, this is useful when you want a price to apply to all customers in a certain geographical region or a specific industry.
  • On all sales documents in the VAT Business Posting Group field. The VAT amount specified for the group is used only for the document you're currently working on.

Note

If you do not specify a group in the VAT Business Posting Group (Price) field VAT will not be included in prices.

Examples

Factors such as the country or region you're selling in, or the type of industries you sell to, can impact the amount of VAT that you must account for. For example, a restaurant might charge 6% VAT for meals that are eaten in-house, and 17% for takeaway. To accomplish that, you create a VAT business posting group (price) for in-house and one for takeaway.

Working with VAT Date

VAT Date in documents

When you create new sales or purchase documents, the VAT Date will be based on the setting in the Default VAT Date field on the General Ledger Setup page. This default value can be the same as Posting Date or Document Date. If you need a different VAT date, you can manually change the value in the VAT Date field. When you post the document, the VAT Date will be shown on the posting document and on the VAT and G/L entries.

Note

If the VAT Date field isn't available on your documents or journals, that means that Do not use VAT Date functionality is chosen in the VAT Date Usage field on the General Ledger Setup page.

Important

If you configure Control VAT Period in the General Ledger Setup as Block posting within closed period, or Block posting within closed and warn for released period, you can post document or journal only if the date in the VAT Date field is not in a closed period in VAT Return Periods. Even if the period in VAT Return Periods is open, you might get a warning based on the VAT Return Status and configuration in the Control VAT Period.

Important

Starting in version 23.1, you can prevent or allow posting of the VAT Date for specific data range, using the Allow VAT Date From and Allow VAT Date To fields in the VAT Setup and the User Setup. If you are using older versions, you can prevent or allow posting of the VAT Date for specific data range, using the Allow Posting From and Allow Posting To fields in the General Ledger Setup and the User Setup.

Note

If you leave the VAT Date blank, Business Central will use your default setup from Default VAT Date in the General Ledger Setup as a VAT Date in the posted transaction.

Modifying the VAT Date in posted entries

If needed, you can change the VAT date posted documents. To change the date in the VAT Date field for posted documents, follow these steps:

  1. Choose the Lightbulb that opens the Tell Me feature. icon, enter VAT Entries, and then choose the related link.
  2. Find the entry with wrong VAT date.
  3. Choose the Edit list action, and then enter the correct date in the VAT Date field.
  4. When you close the page, the VAT date will change in related G/L Entries and in the posted document.

Note

You can change the VAT Date field in VAT Entries only if your current date is not in a closed VAT return period. Even if the period in the VAT Return Periods field is open, you might get a warning based on the VAT Return Status.

Note

If your document has more than one VAT Entry, you only need to change the value in the VAT Date field in one entry related to the document. To keep entries consistent, Business Central automatically changes the VAT date in VAT entries related to this transaction. Business Central will update the VAT Date in other tables (GL Entries and documents), but only related to this transaction.

Correcting VAT amounts manually on sales and purchase documents

You can make corrections to posted VAT entries so that you can change the total sales or purchase VAT amounts without changing the VAT base. For example, if you receive an invoice from a vendor with an incorrect VAT amount.

Although you may have set up one or more combinations to handle import VAT, you must set up at least one VAT product posting group. For example, you can name it CORRECT for correction purposes, unless you can use the same general ledger account in the Purchase VAT Account field on the VAT posting setup line. For more information, see Setting Up to Calculations and Posting Methods for Value-Added Tax.

If a payment discount has been calculated based on an invoice amount that includes VAT, you revert the payment discount part of the VAT amount when the payment discount is granted. Note that you must activate the Adjust for Payments Disc. field in both the general ledger setup in general and the VAT posting setup for specific combinations of a VAT business posting group and a VAT product posting group.

To set the system up for manual VAT entry in sales documents

The following describes how to enable manual VAT changes on sales documents. The steps are similar on the Purchases & Payables Setup page.

  1. On the General Ledger Setup page, specify a Max. VAT Difference Allowed between the amount calculated by application and the manual amount.
  2. On the Sales & Receivables Setup page, place a check mark in the Allow Vat Difference field.

To adjust VAT for a sales document

  1. Open the relevant sales order.
  2. Choose the Statistics action.
  3. On the Invoicing FastTab, choose the value in the No. of Tax Lines field.
  4. Edit the VAT Amount field.

Note

The total VAT amount for the invoice, grouped by VAT identifier, is displayed in the lines. You can manually adjust the amount in the VAT Amount field on the lines for each VAT identifier. When you modify the VAT Amount field, application checks to ensure that you have not changed the VAT by more than the amount you have specified as the maximum difference allowed. If the amount is outside the range of the Max. VAT Difference Allowed, a warning will be displayed stating the maximum allowed difference. You will be unable to proceed until the amount is adjusted to within the acceptable parameters. Click OK and enter another VAT Amount that is within the allowed range. If the VAT difference is equal to or lower than the maximum allowed, the VAT will be divided proportionally among the document lines that have the same VAT identifier.

Calculating VAT manually using journals

You can also adjust VAT amounts in general, sales, and purchase journals. For example, you might need to do this when you enter a vendor invoice in your journal and there is a difference between the VAT amount that Business Central calculated and the VAT amount on the vendor's invoice.

To set the system up for manual VAT entry in a general journals

You must perform the following steps before you manually enter VAT in a general journal.

  1. On the General Ledger Setup page, specify a Max. VAT Difference Allowed between the amount calculated by application and the manual amount.
  2. On the General Journal Templates page, choose the Allow VAT Difference check box for the relevant journal.

To set the system up for manual VAT entry in a sales and purchase journals

You must perform the following steps before you manually enter VAT in a sales or purchase journal.

  1. On the Purchases & Payables Setup page, choose the Allow VAT Difference check box.
  2. Repeat step 1 for the Sales & Receivables Setup page.
  3. After you complete the setup described above, you can adjust the VAT Amount field on the general journal line, or the Bal. VAT Amount field on the sales or purchase journal line. Business Central will check that the difference is not greater than the specified maximum.

Note

If the difference is greater, a warning will be displayed stating the maximum allowed difference. To continue, you must adjust the amount. Choose OK and then enter an amount that is within the allowed range. If the VAT difference is equal to or lower than the maximum allowed, Business Central will show the difference in the VAT Difference field.

Posting Import VAT with Purchase Invoices

Instead of using journals to post an import VAT invoice, you can use a purchase invoice.

To set up purchasing for posting import VAT invoices

  1. Set up a vendor card for the import authority that sends you the import VAT invoice. The Gen. Bus. Posting Group and VAT Bus. Posting Group must be set up in the same way as the general ledger account for the import VAT.
  2. Create a Gen. Product Posting Group for the import VAT and set up an import VAT Def. VAT Product Posting Group for the related Gen. Product Posting Group.
  3. Choose the Lightbulb that opens the Tell Me feature. icon, enter Chart of Accounts, and then choose the related link.
  4. Select the import VAT general ledger account, and then choose the Edit action.
  5. On the Posting FastTab, select the Gen. Prod. Posting Group setup for import VAT. Business Central automatically fills in the VAT Prod. Posting Group field.
  6. Choose the Lightbulb that opens the Tell Me feature. icon, enter General Posting Setup, and then choose the related link.
  7. Create a combination of the Gen. Bus. Posting Group for the VAT authority and the Gen. Prod. Posting Group for import VAT. For this new combination, in the Purchase Account field, choose the import VAT general ledger account.

To create a new invoice for the import authority vendor once you have completed the setup

  1. Choose the Lightbulb that opens the Tell Me feature. icon, enter Purchase Invoices, and then choose the related link.
  2. Create a new purchase invoice.
  3. In the Buy-from Vendor No. field, choose the import authority vendor, and then choose the OK button.
  4. In the purchase line, in the Type field, choose G/L Account, and in the No. field, choose the import VAT general ledger account.
  5. In the Quantity field, type 1.
  6. In the Direct Unit Cost Excl. VAT field, specify the VAT amount.
  7. Post the invoice.

Processing certificates of supply

When you sell goods to a customer in another EU country/region, you must send the customer a certificate of supply that the customer must sign and return to you. The following procedures are for processing certificates of supply for sales shipments, but the same steps apply for service shipments of items, and return shipments to vendors.

To view certificate of supply details

  1. Choose the Lightbulb that opens the Tell Me feature. icon, enter Posted Sales Shipments, and then choose the related link.
  2. Choose the relevant sales shipment to a customer in another EU country/region.
  3. Choose Certificate of Supply Details.
  4. By default, if the Certificate of Supply Required check box is selected for VAT Posting Group setup for the customer, the Status field is set to Required. You can update the field to indicate whether the customer has returned the certificate.

Note

If the VAT Posting Group setup does not have the Certificate of Supply Required check box selected, then a record is created and the Status field is set to Not Applicable. You can update the field to reflect the correct status information. You can manually change the status from Not Applicable to Required, and from Required to Not Applicable as needed.

When you update the Status field to Required, Received, or Not Received, a certificate is created.

Tip

You can use the Certificates of Supply page to get a view of the status of all posted shipments for which a certificate of supply has been created.

  1. Choose Print Certificate of Supply.

Note

You can preview or print the document. When you choose Print Certificate of Supply and print the document, the Printed check box is automatically selected. In addition, if not already specified, the status of the certificate is updated to Required. If needed, you include the printed certificate with the shipment.

To print a certificate of supply

  1. Choose the Lightbulb that opens the Tell Me feature. icon, enter Posted Sales Shipments, and then choose the related link.
  2. Choose the relevant sales shipment to a customer in another EU country/region.
  3. Choose the Print Certificate of Supply action.

Note

Alternatively, you can print a certificate from the Certificate of Supply page.

  1. To include information from the lines on the shipment document in the certificate, select the Print Line Details check box.
  2. Choose the Create Certificates of Supply if Not Already Created check box to have Business Central create certificates for posted shipments that do not have one at the moment of execution. When you choose the check box, new certificates will be created for all posted shipments that do not have certificates within the selected range.
  3. By default, the filter settings are for the shipment document that you have selected. Fill in the filter information to select a specific certificate of supply that you want to print.
  4. On the Certificate of Supply page, choose the Print action to print the report, or choose the Preview action to view it on the screen.

Note

The Certificate of Supply Status field and the Printed field are updated for the shipment on the Certificates of Supply page.

  1. Send the printed certificate of supply to the customer for signature.

To update the status of a certificate of supply for a shipment

  1. Choose the Lightbulb that opens the Tell Me feature. icon, enter Posted Sales Shipments, and then choose the related link.

  2. Choose the relevant sales shipment to a customer in another EU country/region.

  3. In the Status field, choose the relevant option.

    If the customer has returned the signed certificate of supply, choose Received. The Receipt Date field is updated. By default, the receipt date is set to the current work date.

    You can modify the date to reflect the date that you received the customer's signed certificate of supply. You can also add a link to the signed certificate using standard Business Central linking.

    If the customer does not return the signed certificate of supply, choose Not Received. You must then send the customer a new invoice that includes VAT, because the original invoice will not be accepted by the tax authority.

To view a group of certificates, you start from the Certificates of Supply page, and then update the information about the status of outstanding certificates as you receive them back from your customers. This can be useful when you want to search for all certificates that have a certain status, for example, Required, for which you want to update their status to Not Received.

To update the status of a group of certificates of supply

  1. Choose the Lightbulb that opens the Tell Me feature. icon, enter Certificates of Supply, and choose the related link.

  2. Filter the Status field to the value that you want in order to create the list of certificates that you want to manage.

  3. To update the status information, choose Edit List.

  4. In the Status field, choose the relevant option.

    If the customer has returned the signed certificate of supply, choose Received. The Receipt Date field is updated. By default, the receipt date is set to the current work date.

    You can modify the date to reflect the date that you received the signed the certificate of supply. You can also add a link to the signed certificate using standard Business Central document linking.

Note

You cannot create a new certificate of supply on the Certificate of Supply page when you navigate to it using this procedure. To create a certificate for a shipment that was not set up to require one, open the posted sales shipment, and use either of two procedures described above:

  • To manually create a certificate of supply certificate
  • To print a certificate of supply.

See Also

Setting Up Calculations and Posting Methods for Value-Added Tax
Report VAT to a Tax Authority
Validate a VAT Registration Number

Find free e-learning modules for Business Central here