Exercise - Verify virtual network peering by using SSH between Azure virtual machines

  • 10 minutes

In the previous unit, you configured peering connections between the virtual networks to enable resources to communicate with each other. Your configuration used a hub and spoke topology. MarketingVNet was the hub, and SalesVNet and ResearchVNet were spokes.

Diagram of a hub and spoke topology for virtual networks.

Remember, peering connections are nontransitive. Intermediate virtual networks don't allow connectivity to flow through them to connected virtual networks. SalesVNet can communicate with MarketingVNet. ResearchVNet can communicate with MarketingVNet. MarketingVNet can communicate with both SalesVNet and ResearchVNet. The only communication that's not permitted is between SalesVNet and ResearchVNet. Even though SalesVNet and ResearchVNet are both connected to MarketingVNet, they can't communicate with each other because they're not directly peered to each other.

Let's confirm the connectivity across the peering connections. To do this, you'll first create a connection from Azure Cloud Shell to a target VM's public IP address. Then you'll connect from the target VM to the destination VM by using the destination VM's private IP address.

Important

To test the virtual network peering connection, connect to the private IP address assigned to each VM.

  1. To connect to your VMs, you'll use SSH (Secure Shell) directly from Cloud Shell. When using SSH, you'll first find the public IP addresses that are assigned to your test VMs.

  2. In Cloud Shell, run the following command to list the IP addresses you'll use to connect to the VMs:

    az vm list \
    --resource-group "<rgn>[sandbox resource group name]</rgn>" \
    --query "[*].{Name:name, PrivateIP:privateIps, PublicIP:publicIps}" \
    --show-details \
    --output table

  3. Record the output. You'll need the IP addresses for the exercises in this unit.

Before you start the tests, think about what you've learned in this module. What results do you expect? Which VMs will and won't be able to communicate with each other?

Test connections from SalesVM

In the first test, you'll use SSH in Cloud Shell to connect to the public IP address of SalesVM. You'll then attempt to connect from SalesVM to MarketingVM and ResearchVM.

  1. In Cloud Shell, run the following command, using SSH to connect to the public IP address of SalesVM. In the command, replace <SalesVM public IP> with the VM's public IP address.

    ssh -o StrictHostKeyChecking=no azureuser@<SalesVM public IP>

    A diagram showing connection to the public IP address of SalesVM.

  2. Sign in with the password that you used to create the VM. The prompt now shows that you're signed in to SalesVM.

  3. In Cloud Shell, run the following command, using SSH to connect to the private IP address of MarketingVM. In the command, replace <MarketingVM private IP> with this VM's private IP address.

    ssh -o StrictHostKeyChecking=no azureuser@<MarketingVM private IP>

    Diagram showing connection from SalesVM to the private IP address of MarketingVM.

    The connection attempt should succeed because of the peering connection between the SalesVNet and MarketingVNet virtual networks.

  4. Sign in by using the password you used to create the VM.

  5. Enter exit to close this SSH session and return to the SalesVM prompt.

  6. In Cloud Shell, run the following command, using SSH to connect to the private IP address of ResearchVM. In the command, replace <ResearchVM private IP> with this VM's private IP address.

    ssh -o StrictHostKeyChecking=no azureuser@<ResearchVM private IP>

  7. The connection attempt should fail because there's no peering connection between the SalesVNet and ResearchVNet virtual networks. Up to 60 seconds might pass before the connection attempt times out. To force the attempt to stop, use Ctrl+C.

    Diagram showing the attempt failing to connect from SalesVM to the private IP address of ResearchVM.

  8. Enter exit to close the SSH session and return to Cloud Shell.

Test connections from ResearchVM

In the second test, you'll use SSH in Cloud Shell to connect to the public IP address of ResearchVM. You'll then attempt to connect from ResearchVM to MarketingVM and SalesVM.

  1. In Cloud Shell, run the following command, using SSH to connect to the public IP address of ResearchVM. In the command, replace <ResearchVM public IP> with this VM's public IP address.

    ssh -o StrictHostKeyChecking=no azureuser@<ResearchVM public IP>

    Diagram showing connection to the public IP address of ResearchVM.

  2. Sign in by using the password that you used to create the VM. The prompt now shows that you're signed in to ResearchVM.

  3. In Cloud Shell, run the following command, using SSH to connect to the private IP address of MarketingVM. In the command, replace <MarketingVM private IP> with this VM's private IP address.

    ssh -o StrictHostKeyChecking=no azureuser@<MarketingVM private IP>

    Diagram showing connection to the private IP address of MarketingVM.

    The connection attempt should succeed because of the peering connection between the ResearchVNet and MarketingVNet virtual networks.

  4. Sign in by using the password you used to create the VM.

  5. Enter exit to close this SSH session and return to the ResearchVM prompt.

  6. In Cloud Shell, run the following command, using SSH to connect to the private IP address of SalesVM. In the command, replace <SalesVM private IP> with this VM's private IP address.

    ssh -o StrictHostKeyChecking=no azureuser@<SalesVM private IP>

  7. The connection attempt should fail because there's no peering connection between the ResearchVNet and SalesVNet virtual networks. Up to 60 seconds might pass before the connection attempt times out. To force the attempt to stop, use Ctrl+C.

    Diagram showing the attempt failing to connect ResearchVM to the private IP address of SalesVM.

  8. Enter exit to close the SSH session and return to Cloud Shell.

Test connections from Marketing VM

In the final test, you'll use SSH in Cloud Shell to connect to the public IP address of MarketingVM. You'll then attempt to connect from MarketingVM to ResearchVM and SalesVM.

  1. In Cloud Shell, run the following command, using SSH to connect to the public IP address of MarketingVM. In the command, replace <MarketingVM public IP> with this VM's public IP address.

    ssh -o StrictHostKeyChecking=no azureuser@<MarketingVM public IP>

    Diagram that shows connection to the public IP address of MarketingVM.

  2. Sign in by using the password that you used to create the VM. The prompt shows that you're signed in to MarketingVM.

  3. In Cloud Shell, run the following command, using SSH to connect to the private IP address of ResearchVM. In the command, replace <ResearchVM private IP> with this VM's private IP address.

    ssh -o StrictHostKeyChecking=no azureuser@<ResearchVM private IP>

    Diagram that shows Azure Cloud Shell connecting to the Marketing V Net and the Research V Net virtual networks, using a peering connection.

    The connection attempt should succeed because of the peering connection between the MarketingVNet and ResearchVNet virtual networks.

  4. Sign in by using the password you used to create the VM.

  5. Enter exit to close this SSH session, and return to the MarketingVM prompt.

  6. In Cloud Shell, run the following command, using SSH to connect to the private IP address of SalesVM. In the command, replace <SalesVM private IP> with this VM's private IP address.

    ssh -o StrictHostKeyChecking=no azureuser@<SalesVM private IP>

    The connection attempt should also succeed because there is a peering connection between the MarketingVNet and SalesVNet virtual networks.

    Diagram that shows Azure Cloud Shell connecting to the Marketing V Net and the Sales V Net virtual machines, using a peering connection.

  7. Sign in by using the password you used to create the VM.

  8. Enter exit to close this SSH session, and return to the MarketingVM prompt.

  9. Enter exit to close the SSH session, and return to Cloud Shell.

This is a simple test using SSH. It demonstrates network connectivity between peered virtual networks. It also demonstrates lack of network connectivity for transitive connections.

If these servers were running application services, the server connectivity would allow communication between the services running on the VMs. The connectivity would allow the business to share data across departments as required.