Set-CMSoftwareUpdatePhase
Use this cmdlet to configure a deployment phase for a software update.
Syntax
Set-CMSoftwareUpdatePhase
[-AlertDelta <Int32>]
[-AlertThresholdPercentage <Int32>]
[-AlertUnit <TimeUnitType>]
[-AllowMeteredConnection <Boolean>]
[-AllowSystemRestart <Boolean>]
[-AllowWumuFallback <Boolean>]
[-DisableScomAlert <Boolean>]
[-EnableAlert <Boolean>]
[-EnableWakeOnLan <Boolean>]
[-GenerateScomAlertOnFailure <Boolean>]
[-PhaseDescription <String>]
[-RequirePostRebootFullScan <Boolean>]
[-ServerRestartSuppression <Boolean>]
[-SoftwareInstallation <Boolean>]
[-StateMessageVerbosity <VerbosityLevelType>]
[-UseNeighborDP <Boolean>]
[-UserNotificationOption <UserNotificationType>]
[-UseSiteDefaultDP <Boolean>]
[-WorkstationRestartSuppression <Boolean>]
[-WriteFilterCommit <Boolean>]
[-BeginCondition <BeginConditionType>]
[-CriteriaOption <CriteriaType>]
[-CriteriaValue <Int32>]
[-DaysAfterPreviousPhaseSuccess <Int32>]
[-DeadlineUnit <TimeUnitType>]
[-DeadlineValue <Int32>]
[-InstallationChoice <InstallationChoiceType>]
[-MovePhase <ReorderType>]
[-MoveToOrder <Int32>]
[-NewCollection <IResultObject>]
[-NewCollectionId <String>]
[-NewCollectionName <String>]
[-NewPhaseName <String>]
[-ThrottlingDays <Int32>]
[-Collection <IResultObject>]
[-CollectionId <String>]
[-CollectionName <String>]
[-Id <String>]
[-InputObject] <IResultObject>
[-Name <String>]
[-Order <Int32>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMSoftwareUpdatePhase
[-AlertDelta <Int32>]
[-AlertThresholdPercentage <Int32>]
[-AlertUnit <TimeUnitType>]
[-AllowMeteredConnection <Boolean>]
[-AllowSystemRestart <Boolean>]
[-AllowWumuFallback <Boolean>]
[-DisableScomAlert <Boolean>]
[-EnableAlert <Boolean>]
[-EnableWakeOnLan <Boolean>]
[-GenerateScomAlertOnFailure <Boolean>]
[-PhaseDescription <String>]
[-RequirePostRebootFullScan <Boolean>]
[-ServerRestartSuppression <Boolean>]
[-SoftwareInstallation <Boolean>]
[-StateMessageVerbosity <VerbosityLevelType>]
[-UseNeighborDP <Boolean>]
[-UserNotificationOption <UserNotificationType>]
[-UseSiteDefaultDP <Boolean>]
[-WorkstationRestartSuppression <Boolean>]
[-WriteFilterCommit <Boolean>]
[-BeginCondition <BeginConditionType>]
[-CriteriaOption <CriteriaType>]
[-CriteriaValue <Int32>]
[-DaysAfterPreviousPhaseSuccess <Int32>]
[-DeadlineUnit <TimeUnitType>]
[-DeadlineValue <Int32>]
[-InstallationChoice <InstallationChoiceType>]
[-MovePhase <ReorderType>]
[-MoveToOrder <Int32>]
[-NewCollection <IResultObject>]
[-NewCollectionId <String>]
[-NewCollectionName <String>]
[-NewPhaseName <String>]
[-ThrottlingDays <Int32>]
[-Collection <IResultObject>]
[-CollectionId <String>]
[-CollectionName <String>]
[-Id <String>]
[-Name <String>]
[-Order <Int32>]
[-PhasedDeploymentId] <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMSoftwareUpdatePhase
[-AlertDelta <Int32>]
[-AlertThresholdPercentage <Int32>]
[-AlertUnit <TimeUnitType>]
[-AllowMeteredConnection <Boolean>]
[-AllowSystemRestart <Boolean>]
[-AllowWumuFallback <Boolean>]
[-DisableScomAlert <Boolean>]
[-EnableAlert <Boolean>]
[-EnableWakeOnLan <Boolean>]
[-GenerateScomAlertOnFailure <Boolean>]
[-PhaseDescription <String>]
[-RequirePostRebootFullScan <Boolean>]
[-ServerRestartSuppression <Boolean>]
[-SoftwareInstallation <Boolean>]
[-StateMessageVerbosity <VerbosityLevelType>]
[-UseNeighborDP <Boolean>]
[-UserNotificationOption <UserNotificationType>]
[-UseSiteDefaultDP <Boolean>]
[-WorkstationRestartSuppression <Boolean>]
[-WriteFilterCommit <Boolean>]
[-BeginCondition <BeginConditionType>]
[-CriteriaOption <CriteriaType>]
[-CriteriaValue <Int32>]
[-DaysAfterPreviousPhaseSuccess <Int32>]
[-DeadlineUnit <TimeUnitType>]
[-DeadlineValue <Int32>]
[-InstallationChoice <InstallationChoiceType>]
[-MovePhase <ReorderType>]
[-MoveToOrder <Int32>]
[-NewCollection <IResultObject>]
[-NewCollectionId <String>]
[-NewCollectionName <String>]
[-NewPhaseName <String>]
[-ThrottlingDays <Int32>]
[-Collection <IResultObject>]
[-CollectionId <String>]
[-CollectionName <String>]
[-Id <String>]
[-Name <String>]
[-Order <Int32>]
[-PhasedDeploymentName] <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Applies to version 2006 and later. Use this cmdlet to configure a deployment phase for a software update. For more information, see Create phased deployments.
Examples
Example 1: Change the collection
This example changes the collection for the second phase in the software update phased deployment passed through on the command line.
$phasedDeployment = Get-CMSoftwareUpdatePhasedDeployment -Name "myPhasedDeployment"
$phasedDeployment | Set-CMSoftwareUpdatePhase -Order 2 -NewCollectionId "XYZ00227"Example 2: Move a phase up
This example moves a phase up in the order. It selects the phased deployment by its ID, and selects the phase by the associated collection ID.
Set-CMSoftwareUpdatePhase -PhasedDeploymentId "0bc464d9-e7dd-44c1-a157-3f8be6a79c03" -CollectionId "XYZ00227" -MovePhase MoveUpExample 3: Configure phase settings
This example changes the configuration settings for the selected phase.
Set-CMSoftwareUpdatePhase -PhasedDeploymentName "myPhasedDeployment" -Name "phase1" -UserNotification HideAll -SoftwareInstallation $true -AllowSystemRestart $true -WriteFilterCommit $false -EnableWakeOnLan $true -PhaseDescription "this is phase 1" -StateMessageVerbosity AllMessages -ServerRestartSuppression $true -WorkstationRestartSuppression $true -RequirePostRebootFullScan $true -EnableAlert $true -AlertThresholdPercentage 90 -AlertDelta 12 -AlertUnit Hours -DisableSCOMAlert $true -GenerateSCOMAlertOnFailure $true -UseNeighborDP $true -UseSiteDefaultDP $true -AllowWUMUFallback $true -AllowMeteredConnection $true -CriteriaOption Compliance -CriteriaValue 90 -BeginCondition AfterPeriod -DaysAfterPreviousPhaseSuccess 3 -ThrottlingDays 5 -InstallationChoice AfterPeriod -DeadlineUnit Hours -DeadlineValue 12Parameters
-AlertDelta
This parameter is the same as the following setting on the Alerts page of the Add Phase Wizard in the console: Offset from the deadline time. Specify an integer value for the offset, and then specify the period type with the AlertUnit parameter.
To set this value, you have to use the EnableAlert parameter.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AlertThresholdPercentage
This parameter is the same as the following setting on the Alerts page of the Add Phase Wizard in the console: Client compliance is below the following (percent). Specify an integer value for the percentage. To set this value, you have to use the EnableAlert parameter.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AlertUnit
Specify the type of period. Use this parameter with AlertDelta.
| Type: | TimeUnitType |
| Accepted values: | Hours, Days, Weeks, Months |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowMeteredConnection
This parameter is the same as the following setting on the Download Settings page of the Add Phase Wizard in the console: Allow clients on a metered internet connection to download content after the installation deadline, which might incur additional costs.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowSystemRestart
This parameter is the same as the following setting on the User Experience page of the Add Phase Wizard in the console: System restart (if required to complete installation). This setting applies when the installation deadline is reached, to allow this activity to be performed outside the maintenance window.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowWumuFallback
This parameter is the same as the following setting on the Download Settings page of the Add Phase Wizard in the console: If software updates are not available on distribution point in current, neighbor or site boundary groups, download content from Microsoft Updates.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-BeginCondition
Specify an option for beginning this phase of deployment after success of the previous phase:
AfterPeriod: This parameter is the same as the following setting on the Phase Settings page of the Add Phase Wizard in the console: Automatically begin this phase after a deferral period (in days). If you specify this value, use DaysAfterPreviousPhaseSuccess to configure the period of time.Manually: This parameter is the same as the following setting on the Phase Settings page of the Add Phase Wizard in the console: Manually begin this phase of deployment.
| Type: | BeginConditionType |
| Accepted values: | AfterPeriod, Manually |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Collection
Specify an object for the target collection.
| Type: | IResultObject |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CollectionId
Specify the target collection by ID.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CollectionName
Specify the target collection by name.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CriteriaOption
Specify an option to choose the criteria for success of the previous phase:
Compliance: This parameter is the same as the following setting on the Phase Settings page of the Add Phase Wizard in the console: Deployment success percentage. Specify the percentage value with the CriteriaValue parameter.Number: This parameter is the same as the following setting on the Phase Settings page of the Add Phase Wizard in the console: Number of devices successfully deployed. Specify the number of devices with the CriteriaValue parameter.
| Type: | CriteriaType |
| Accepted values: | Compliance, Number |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CriteriaValue
This integer value depends upon the value that you specify for CriteriaOption:
Compliance: Specify the percentageNumber: Specify the number of devices
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DaysAfterPreviousPhaseSuccess
Specify an integer value for the number of days after success of the previous phase to begin this phase. This parameter is the same as the following setting on the Phase Settings page of the Add Phase Wizard in the console: Automatically begin this phase after a deferral period (in days).
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DeadlineUnit
Specify the type of deadline period. Use this parameter with DeadlineValue.
| Type: | TimeUnitType |
| Accepted values: | Hours, Days, Weeks, Months |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DeadlineValue
This parameter is only used if you specify AfterPeriod with the InstallationChoice parameter.
Specify an integer value for the period of time for the deadline. Use the DeadlineUnit parameter to specify the type of period: Hours, Days, Weeks, Months. This parameter is the same as the following setting on the Phase Settings page of the Add Phase Wizard in the console: Installation is required after this period of time.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableScomAlert
This parameter is the same as the following setting on the Alerts page of the Add Phase Wizard in the console: Disable Operations Manager alerts while software updates run.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableAlert
This parameter is the same as the following setting on the Alerts page of the Add Phase Wizard in the console: Generate an alert when the following conditions are met. When you set this parameter to $true, also set the following parameters:
- AlertThresholdPercentage
- AlertDelta
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableWakeOnLan
This parameter is the same as the following setting on the Deployment Settings page of the Add Phase Wizard in the console: Use Wake-on-LAN to wake up clients for required deployments.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior. It's not recommended. You can't combine it with DisableWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-GenerateScomAlertOnFailure
This parameter is the same as the following setting on the Alerts page of the Add Phase Wizard in the console: Generate Operations Manager alert when a software update installation fails.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Id
Specify the ID of the phase to configure.
| Type: | String |
| Aliases: | PhaseId |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specify a phased deployment object that includes the phase to configure.
| Type: | IResultObject |
| Aliases: | PhasedDeployment |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InstallationChoice
Specify an option for the behavior relative to when the software is made available:
AsSoonAsPossible: This parameter is the same as the following setting on the Phase Settings page of the Add Phase Wizard in the console: Installation is required as soon as possible.AfterPeriod: This parameter is the same as the following setting on the Phase Settings page of the Add Phase Wizard in the console: Installation is required after this period of time. If you specify this value, use DeadlineUnit and DeadlineValue to configure the period of time.
| Type: | InstallationChoiceType |
| Accepted values: | AsSoonAsPossible, AfterPeriod |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MovePhase
Change the order for the selected phase. You can move it up one, move it down one, or move to a specific index. If you specify MoveToOrder, use the -MoveToOrder parameter to set the specific index.
| Type: | ReorderType |
| Accepted values: | MoveUp, MoveDown, MoveToOrder |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MoveToOrder
When you set the -MovePhase parameter to MoveToOrder, use this parameter to set the specific index.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
Specify the name of the phase to configure.
| Type: | String |
| Aliases: | PhaseName |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewCollection
Specify a collection object to use as the new target for the selected phase.
| Type: | IResultObject |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewCollectionId
Specify a collection by ID to use as the new target for the selected phase.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewCollectionName
Specify a collection by name to use as the new target for the selected phase.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewPhaseName
Use this parameter to rename the selected phase.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Order
Specify the index of the phase to configure.
| Type: | Int32 |
| Aliases: | PhaseOrder |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PhasedDeploymentId
Select the phased deployment by ID. Then use other parameters to select the specific phase in that deployment.
| Type: | String |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PhasedDeploymentName
Select the phased deployment by name. Then use other parameters to select the specific phase in that deployment.
| Type: | String |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PhaseDescription
Specify a description for the phase.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RequirePostRebootFullScan
This parameter is the same as the following setting on the User Experience page of the Add Phase Wizard in the console: If any update in this deployment requires a system restart, run updates deployment evaluation cycle after restart.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServerRestartSuppression
This parameter is the same as the following setting on the User Experience page of the Add Phase Wizard in the console. Suppress the system restart on the following devices: Servers.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SoftwareInstallation
This parameter is the same as the following setting on the User Experience page of the Add Phase Wizard in the console: Software Installation. This setting applies when the installation deadline is reached, to allow this activity to be performed outside the maintenance window.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StateMessageVerbosity
This parameter is the same as the following setting on the Deployment Settings page of the Add Phase Wizard in the console: State message detail level with the following values:
AllMessages: All messagesOnlySuccessAndErrorMessages: Only success and error messagesOnlyErrorMessages: Only error messages
| Type: | VerbosityLevelType |
| Accepted values: | AllMessages, OnlySuccessAndErrorMessages, OnlyErrorMessages |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottlingDays
Specify an integer value for the number of days to gradually make this software available. This parameter is the same as the following setting on the Phase Settings page of the Add Phase Wizard in the console: Gradually make this software available over this period of time (in days).
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseNeighborDP
This parameter is the same as the following setting on the Download Settings page of the Add Phase Wizard in the console: Select the deployment option to use when a client uses a distribution point from a neighbor boundary group or the default site boundary group. Specify the following values:
$true: Download software updates from distribution point and install$false: Do not install software updates
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserNotificationOption
This parameter is the same as the following setting on the User Experience page of the Add Phase Wizard in the console: Specify user experience setting for this deployment with the following values:
DisplayAll: Display in Software Center and show all notificationsDisplaySoftwareCenterOnly: Display in Software Center, and only show notifications for computer restartsHideAll: Hide in Software Center and all notifications
| Type: | UserNotificationType |
| Accepted values: | DisplayAll, DisplaySoftwareCenterOnly, HideAll |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseSiteDefaultDP
This parameter is the same as the following setting on the Download Settings page of the Add Phase Wizard in the console: When software updates are not available on any distribution points in current or neighbor boundary group, client can download and install software updates from distribution points in site default boundary group. Specify the following values:
$true: Download and install software updates from the distribution points in site default boundary group$false: Do not install software updates
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WorkstationRestartSuppression
This parameter is the same as the following setting on the User Experience page of the Add Phase Wizard in the console. Suppress the system restart on the following devices: Workstations.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WriteFilterCommit
This parameter is the same as the following setting on the User Experience page of the Add Phase Wizard in the console: Commit changes at deadline or during a maintenance window (requires restart). This setting applies to write filter handling for Windows Embedded devices.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
IResultObject
Related Links
- Get-CMPhase
- New-CMSoftwareUpdatePhase
- Get-CMSoftwareUpdatePhasedDeployment
- New-CMSoftwareUpdateAutoPhasedDeployment
- New-CMSoftwareUpdateManualPhasedDeployment
- Remove-CMSoftwareUpdatePhasedDeployment
- Set-CMSoftwareUpdatePhasedDeployment
- Get-CMPhasedDeploymentStatus
- Move-CMPhasedDeploymentToNext
- Resume-CMPhasedDeployment
- Suspend-CMPhasedDeployment
- Create phased deployments
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for