INF AddPowerSetting directive
An AddPowerSetting directive references one or more sections that are used to modify or create power setting information. Each add-power-setting-section defines a power setting, the allowed values for the power setting, the friendly name of the power setting, and the description of the power setting. An add-power-setting-section also specifies the default value for each power scheme personality. For more information about power settings and power scheme personalities, see Managing Device Performance States.
[DDInstall] |
[DDInstall.HW] |
[DDInstall.CoInstallers] |
[ClassInstall32] |
[ClassInstall32.ntx86] |
[ClassInstall32.ntia64] | (Windows Vista)
[ClassInstall32.ntamd64] | (Windows Vista)
[ClassInstall32.ntarm] | (Windows 8 and later versions of Windows)
[ClassInstall32.ntarm64] (Windows 10 version 1709 and later versions of Windows)
AddPowerSetting=add-power-setting-section[,add-power-setting-section]
In general, an add-power-setting-section includes the following directives:
A SubGroup directive.
A Setting directive
A list of two or more Value directives or one ValueRange directive.
A set of six Default directives.
An add-power-setting-section takes one of the following two possible forms:
If the allowed power settings values can best be defined as a set of two or more discrete values, use a list of Value directives to specify the allowed values, as follows:
[add-power-setting-section] [SubGroup = {subgroup-guid}] | SubGroup = {subgroup-guid}, subgroup-name, subgroup-description, subgroup-icon Setting = {setting-guid}, [setting-name],[setting-description],[setting-icon] Value = value-index, value-name,[value-description], value-flags, value-data Value = value-index, value-name,[value-description], value-flags, value-data [Value = value-index, value-name,[value-description], value-flags, value-data ... Value = value-index, value-name,[value-description], value-flags, value-data] (Six required Default directives, each one of which has the following form) Default = power-scheme-personality-GUID, AC/DC-index, default-setting-index | default-setting-value ...If the allowed power settings values can best be defined as an incremented sequence of nonnegative integer values within a specified range, use one ValueRange directive to specify allowed values, as follows:
[add-power-setting-section] [SubGroup = {subgroup-guid}] | SubGroup = {subgroup-guid}, subgroup-name, subgroup-description, subgroup-icon Setting = {setting-guid}, [setting-name],[setting-description],[setting-icon] ValueRange = range-minimum-value, range-maximum-value, range-increment, [range-unit-label] (Six required Default directives, each one of which has the following form) Default = power-scheme-personality-GUID, AC/DC-index, default-setting-index | default-setting-value ...
Entries
Note
Except for a value-data entry, all the following entries that supply a string value can specify the string in one of the ways that are described in Specifying an AddPowerSetting String Entry Value.
SubGroup
A subgroup groups power settings that are logically related.
To specify a system-defined subgroup, include a SubGroup directive and supply only the subgroup-guid entry. The system-defined subgroups are represented by the constants GUID_Xxx_SUBGROUP and NO_SUBGROUP_GUID, which are defined in Wdm.h.
For example, GUID_VIDEO_SUBGROUP represents the subgroup that contains the video power settings for a power scheme personality. The NO_SUBGROUP_GUID constant represents a collection of settings that do not logically belong to any subgroup. If a SubGroup directive is not included, the setting is added by default to the collection of settings that do not logically belong to any subgroup.
To define a new subgroup, include the SubGroup directive and supply the following required entries: subgroup-guid, subgroup-name, subgroup-description, and subgroup-icon. The GUID of the new subgroup must be unique and the other entries should be as descriptive as possible.
subgroup-guid
The required entry supplies the GUID that identifies the subgroup. The format of this entry is {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}, where "X" is a hexadecimal digit.
For example, the value of the system-defined constant GUID_VIDEO_SUBGROUP is {7516B95F-F776-4464-8C53-06167F40CC99}. This GUID represents the subgroup that contains the video power settings for a power scheme personality.
subgroup-name
A string that specifies the subgroup name of the power setting. If the subgroup is a system-defined subgroup, this entry should not be supplied. If the subgroup is new, this entry is required.
subgroup-description
A string that describes to the user the power subgroup. If the subgroup is a system-defined subgroup, this entry should not be supplied. If the subgroup is new, this entry is required.
subgroup-icon
A reference to an icon resource. If the subgroup is a system-defined subgroup, this entry should not be supplied. If the subgroup is new, this entry is required.
An icon resource must be specified as a language-neutral registry value. For information about how to specify a language-neutral registry value, see Specifying an AddPowerSetting String Entry Value.
Setting
The Setting directive identifies the setting to which all the other entries in the section apply. One Setting directive is required in an add-power-setting section and there can only be one Setting directive in an add-power-setting section. If an INF file defines more than one setting, each setting must be defined in its own add-power-setting section.
The following are the entries that are associated with a Setting directive.
setting-guid
A required entry that specifies the GUID that represents the power setting. The format of this entry is {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}, where each "X" is a hexadecimal digit.
For example, the following is a custom GUID value: {BFC0D9E9-549C-483D-AD2A-3D90C98A8B03}.
setting-name
An optional entry that specifies a string that contains the friendly name of the power setting. Power Options in Control Panel displays this friendly name to a user.
setting-description
An optional entry that specifies a string that describes to the user the power setting and the effect that the setting has on system power and performance.
setting-icon
An optional entry that is a reference to an icon resource. An icon resource must be specified by a language-neutral registry value.
For information about how to specify a language-neutral-registry value, see Specifying an AddPowerSetting String Entry Value.
Value
A Value directive defines an allowed value for a power setting. The Value directive should be used if the values can best be defined as a set of two or more values, where each value can have a value-specific custom data type. In this situation, an add-power-setting-section should include two or more Value directives. A user can select one of these values in Power Options in Control Panel to configure a power scheme.
If the allowed power setting values can best be described as incremented set of non-negative integers within a range, use the ValueRange directive instead of the Value directive to specify the allowed power setting values.
value-index
A required entry that specifies a unique index value, which is greater than or equal to zero, and that is used to reference the corresponding setting value. Power Options in Control Panel displays power setting values to a user in order of their corresponding index values, from lowest to highest.
value-name
A required entry that supplies a string that provides the friendly name for the corresponding setting value. Power Options in Control Panel displays the friendly names of the power setting values to a user.
value-description
An optional entry that supplies a string that describes to the user the power setting value and the effect that the setting value has on system power and performance.
value-flags
A required entry that specifies the data type of the corresponding value-data entry, as indicated in the following table.
| Flag value | Data type |
|---|---|
| 0x00000001 | REG_BINARY |
| 0x00010001 | REG_DWORD |
| 0x00000000 | REG_SZ |
value-data
A required entry that supplies the data for the corresponding setting value, the format of which depends on the data type that is specified by corresponding value-flags entry, as follows:
A REG_BINARY value can be specified in hexadecimal format by using 0x notation, or as a comma-separated list of paired hexadecimal numbers without the 0x notation.
For example, the following entries are equivalent: 0xFEDCBA9876543210 and the following comma-separated list of paired hexadecimal digits: FE, DC, BA, 98, 76, 54, 32, 10.
A REG_DWORD value can be specified either in hexadecimal format (by using 0x notation) or in decimal format.
A REG_SZ value can only be expressed as a string enclosed in double quotation marks ("quoted-string") or as a %strkey% token that is defined in the INF Strings section of an INF file.
Note
You should not use string values because they cannot be localized. Instead, use values of type REG_BINARY or REG_DWORD.
ValueRange
Use the ValueRange directive if the allowed power settings values can best be defined as an incremented sequence of non-negative integer values within a specified range. The power manager validates that a setting that a user selects in Power Options in Control Panel is one of these allowed values. The set of allowed values is determined by a minimum allowed value, a maximum allowed value, and an increment between the allowed values within the range. A value is allowed if it satisfies the following:
range-minimum-value + k*range-increment
where range-minimum-value is greater than or equal to zero, k and range-increment are greater than or equal to one, and the value is less than or equal to range-maximum-value. In addition, range-maximum-value should be equal to range-minimum-value + k*range-increment for some k.
For example, for a range-minimum-value equal to 0, a range-maximum-value equal to 10, and a range-increment equal to 2, the allowed values are as follows: 0, 2, 4, 6, 8, and 10.
If the allowed power setting values can best be described as a list of values, where each value can have a value-specific custom data type, use the Value directive instead of the ValueRange directive.
range-minimum-value
A value of type REG_DWORD that specifies the minimum allowed power setting.
range-maximum-value
A value of type REG_DWORD that specifies the maximum allowed power setting value. The maximum value must be greater than or equal to minimum-value and should be equal to range-minimum-value + k*range-increment, for some integer k that is greater than zero.
range-increment
A value of type REG_DWORD that is greater than zero. This value specifies the difference between consecutive values within the inclusive range that is specified by range-minimum-value and range-maximum-value.
range-unit-label
An optional string that describes the power setting value. The string, together with setting-name, informs the user of what type of data to enter.
For example, the string can be used to specify the value units, such as "minutes" or "%" (representing percent).
Default
There are six Default directives that must be included in an AddPowerSetting section. A Default directive specifies the default value for one of the three system-defined power scheme personalities that apply to an AC power state and the three system-defined power scheme personalities that apply to a DC power state.
It is extremely important that the defaults be valid and accurate. If the user does not manually set a power setting, the power manager uses the default value that is specified by the Default directive.
power-scheme-personality-GUID
One of the following GUIDs, which identifies the power scheme that the default value applies to.
| Personality | GUID |
|---|---|
| Power saver | {A1841308-3541-4FAB-BC81-F71556F20B4A} |
| High performance | {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C} |
| Balanced | {381B4222-F694-41F0-9685-FF5BB260DF2E} |
These GUIDs are defined in Wdm.h.
AC/DC-index
If AC/DC-index is 0, the setting applies to an AC power state and if AC/DC-index is 1, the setting applies to a DC power state. A value other than 0 or 1 is not valid.
default-setting-index
If the Value directive is used to specify allowed values, default-setting-index is the value of the value-index entry of the Value directive. If the ValueRange directive is used to specify allowed values, this entry does not apply.
default-setting-value
If the ValueRange directive is used to specify allowed values, default-setting-value is one of the allowed values that are specified by the ValueRange directive. If the Value directive is used to specify allowed values, this entry does not apply.
Remarks
An add-power-setting-section name must be unique in an INF file, but it can be referenced by more than one AddPowerSetting directive in the same INF file. Each section name must follow the general rules that are described in General Syntax Rules for INF Files.
The power manager does not automatically remove device power policies after a device is uninstalled. Installation or removal of power settings, values, and defaults can be performed by a co-installer through the system-supplied power setting routines that are defined in Powrprof.h. For more information about these power management routines, see the power management reference that is provided with the Microsoft Windows SDK documentation.
In addition, the Powercfg.exe command-line tool can be used to change power settings. For information about Powercfg.exe, see the Microsoft Help and Support Center.
For more information about how to use the system-defined .nt, .ntx86, .ntia64, .ntamd64, .ntarm, and .ntarm64 extensions, see Creating INF Files for Multiple Platforms and Operating Systems.
Specifying an AddPowerSetting string entry value
Except for value-data entries of type REG_SZ, all the other string entry values that are supplied with an AddPowerSetting directive can be expressed as a string enclosed in double quotation marks ("quoted-string"), as a %strkey% token that is defined in the INF string section of an INF file, or as language-neutral registry value.
Language-neutral registry values are used to support Windows Multilingual User Interface (MUI) and are specified as follows:
"@file-path,-resourceID[;comment]"
The entries that specify a language-neutral registry value are as follows:
file-path
The fully qualified path of the file that contains the resource.
resourceID
The resource ID of the corresponding resource. In the case of a string, the resourceID references a string. In the case of an icon, the resourceID references an icon.
Comment
An optional value that can be used to aid debugging or to provide an additional comment about the setting. In the case of a string resource, the power manager does not combine or display the comment string with specified resource string.
For more information about how to specify language-neutral registry values, see Rendering Shell and Registry Strings.
Examples
The following two examples define power settings that control the brightness of an LCD. The first example shows how to use the Value directive to define a minimum, a medium, and a maximum LCD brightness value.
// Within a DDinstall or ClassInstall23 section
AddPowerSetting=LCDDim
...
[LCDDim]
SubGroup = {7516B95F-F776-4464-8C53-06167F40CC99}
Setting = {381B4222-F694-41F0-9685-FF5BB260DF2E}, "LCD Brightness", "Controls the brightness of the LCD display"
Value = 0, "Low", "Minimum Brightness", %FLG_ADDREG_TYPE_DWORD%, 0x50
Value = 1, "Medium", "Medium Brightness", %FLG_ADDREG_TYPE_DWORD%, 0x75
Value = 2, "High", "Maximum Brightness", %FLG_ADDREG_TYPE_DWORD%, 0x100
Default = %GUID_MAX_POWER_SAVINGS%, %AC%, 0
Default = %GUID_MAX_POWER_SAVINGS%, %DC%, 0
Default = %GUID_TYPICAL_POWER_SAVINGS%, %AC%, 2
Default = %GUID_TYPICAL_POWER_SAVINGS%, %DC%, 1
Default = %GUID_MIN_POWER_SAVINGS%, %AC%, 2
Default = %GUID_MIN_POWER_SAVINGS%, %DC%, 2
...
[Strings]
GUID_MAX_POWER_SAVINGS = {a1841308-3541-4fab-bc81-f71556f20b4a}
GUID_TYPICAL_POWER_SAVINGS = {381b4222-f694-41f0-9685-ff5bb260df2e}
GUID_MIN_POWER_SAVINGS = {8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}
AC = 0
DC = 1
FLG_ADDREG_TYPE_DWORD = 0x00010001
The second example shows how to use the ValueRange directive to define a range of allowed LCD brightness values that varies from 0% through 100%, with an increment of 1% between allowed values.
// Within a DDinstall or a ClassInstall23 section
AddPowerSetting=LCDDimRange
...
[LCDDimRange]
SubGroup = {7516B95F-F776-4464-8C53-06167F40CC99}
Setting = {381B4222-F694-41F0-9685-FF5BB260DF2E}, "LCD Brightness", "Controls the brightness of the LCD display"
ValueRange = 0, 100, 1, "%"
Default = %GUID_MAX_POWER_SAVINGS%, %AC%, 50
Default = %GUID_MAX_POWER_SAVINGS%, %DC%, 50
Default = %GUID_TYPICAL_POWER_SAVINGS%, %AC%, 95
Default = %GUID_TYPICAL_POWER_SAVINGS%, %DC%, 50
Default = %GUID_MIN_POWER_SAVINGS%, %AC%, 100
Default = %GUID_MIN_POWER_SAVINGS%, %DC%, 100
[Strings]
GUID_MAX_POWER_SAVINGS = {a1841308-3541-4fab-bc81-f71556f20b4a}
GUID_TYPICAL_POWER_SAVINGS = {381b4222-f694-41f0-9685-ff5bb260df2e}
GUID_MIN_POWER_SAVINGS = {8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}
AC = 0
DC = 1
See also
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for