USB driver reference
Overview of the USB driver reference technology.
To develop USB driver reference, you need these headers:
For programming guidance for this technology, see:
IOCTL_GENERICUSBFN_ACTIVATE_USB_BUS This I/O control code (IOCTL) is sent by a user-mode service or application to notify GenericUSBFn.sys to activate the Universal Serial Bus (USB). Once activated, the bus is prepared to process bus events and handle traffic. |
IOCTL_GENERICUSBFN_BUS_EVENT_NOTIFICATION This I/O control code (IOCTL) is sent by a user-mode service or application to register for Universal Serial Bus (USB) event. |
IOCTL_GENERICUSBFN_CONTROL_STATUS_HANDSHAKE_IN This I/O control code (IOCTL) is sent by a user mode service or application to request a zero-length control status handshake on endpoint 0 in the IN direction. |
IOCTL_GENERICUSBFN_CONTROL_STATUS_HANDSHAKE_OUT This I/O control code (IOCTL) is sent by a user-mode service or application to complete a zero-length control status handshake on endpoint 0 in the OUT direction. |
IOCTL_GENERICUSBFN_DEACTIVATE_USB_BUS This IOCTL code is nevtot supported. |
IOCTL_GENERICUSBFN_GET_CLASS_INFO This I/O control code (IOCTL) is sent by the user-mode service or application to retrieve information about a device's available pipes as configured in the registry. |
IOCTL_GENERICUSBFN_GET_CLASS_INFO_EX This I/O control code (IOCTL) is sent by a user-mode service or application to retrieve information about a device's available pipes as configured in the registry. |
IOCTL_GENERICUSBFN_GET_INTERFACE_DESCRIPTOR_SET This I/O control code (IOCTL) is sent by a user-mode service or application to get the entire interface descriptor set for a function on the device.This IOCTL request does not retrieve the interface descriptor set for the entire device.Universal Serial Bus (USB) interface descriptor set for a function on the device. |
IOCTL_GENERICUSBFN_GET_PIPE_STATE This I/O control code (IOCTL) is sent by a user-mode service or application to get the state of the specified Universal Serial Bus (USB) pipe. |
IOCTL_GENERICUSBFN_REGISTER_USB_STRING This I/O control code (IOCTL) is sent by a user-mode service or application to register a string descriptor.Universal Serial Bus (USB) string descriptor. |
IOCTL_GENERICUSBFN_SET_PIPE_STATE This I/O control code (IOCTL) is sent by a user-mode service or application to set the state of the specified Universal Serial Bus (USB) pipe. |
IOCTL_GENERICUSBFN_TRANSFER_IN This I/O control code (IOCTL) is sent by a user-mode service or application to issue an IN direction transfer on the endpoint that corresponds to the specified pipe ID in the input buffer. (IOCTL_GENERICUSBFN_TRANSFER_IN) |
IOCTL_GENERICUSBFN_TRANSFER_IN_APPEND_ZERO_PKT This I/O control code (IOCTL) is sent by a user-mode service or application to issue an IN direction transfer on the endpoint that corresponds to the specified pipe ID in the input buffer. (IOCTL_GENERICUSBFN_TRANSFER_IN_APPEND_ZERO_PKT) |
IOCTL_GENERICUSBFN_TRANSFER_OUT This I/O control code (IOCTL) is sent by a user-mode service or application to issue an OUT direction transfer on the endpoint that corresponds to the specified pipe ID in the input buffer. |
IOCTL_GET_HCD_DRIVERKEY_NAME The IOCTL_GET_HCD_DRIVERKEY_NAME I/O control request retrieves the driver key name in the registry for a USB host controller driver. |
IOCTL_USB_DIAGNOSTIC_MODE_OFF The IOCTL_USB_DIAGNOSTIC_MODE_OFF I/O control has been deprecated. Do not use. |
IOCTL_USB_DIAGNOSTIC_MODE_ON The IOCTL_USB_DIAGNOSTIC_MODE_ON I/O control has been deprecated. Do not use. |
IOCTL_USB_GET_ROOT_HUB_NAME The IOCTL_USB_GET_ROOT_HUB_NAME I/O control request is used with the USB_ROOT_HUB_NAME structure to retrieve the symbolic link name of the root hub.IOCTL_USB_GET_ROOT_HUB_NAME is a user-mode I/O control request. |
IOCTL_USB_USER_REQUEST The IOCTL_USB_USER_REQUEST I/O control request is available to both user-mode applications and kernel-mode drivers. |
USB_USER_ERROR_CODE The USB_USER_ERROR_CODE enumeration lists the error codes that a USB user-mode request reports when it fails. |
WDMUSB_POWER_STATE The WDMUSB_POWER_STATE enumeration indicates the power state of a host controller or root hub. |
WinUsb_AbortPipe The WinUsb_AbortPipe function aborts all of the pending transfers for a pipe. This is a synchronous operation. |
WinUsb_ControlTransfer The WinUsb_ControlTransfer function transmits control data over a default control endpoint. |
WinUsb_FlushPipe The WinUsb_FlushPipe function discards any data that is cached in a pipe. This is a synchronous operation. |
WinUsb_Free The WinUsb_Free function releases all of the resources that WinUsb_Initialize allocated. This is a synchronous operation. |
WinUsb_GetAdjustedFrameNumber The WinUsb_GetAdjustedFrameNumber function computes what the current USB frame number should be based on the frame number value and timestamp. |
WinUsb_GetAssociatedInterface The WinUsb_GetAssociatedInterface function retrieves a handle for an associated interface. This is a synchronous operation. |
WinUsb_GetCurrentAlternateSetting The WinUsb_GetCurrentAlternateSetting function gets the current alternate interface setting for an interface. This is a synchronous operation. |
WinUsb_GetCurrentFrameNumber The WinUsb_GetCurrentFrameNumber function gets the current frame number for the bus. |
WinUsb_GetCurrentFrameNumberAndQpc The WinUsb_GetCurrentFrameNumberAndQpc function retrieves the system query performance counter (QPC) value synchronized with the frame and microframe. |
WinUsb_GetDescriptor The WinUsb_GetDescriptor function returns the requested descriptor. This is a synchronous operation. |
WinUsb_GetOverlappedResult The WinUsb_GetOverlappedResult function retrieves the results of an overlapped operation on the specified file. |
WinUsb_GetPipePolicy The WinUsb_GetPipePolicy function retrieves the policy for a specific pipe associated with an endpoint on the device. This is a synchronous operation. |
WinUsb_GetPowerPolicy The WinUsb_GetPowerPolicy function retrieves the power policy for a device. This is a synchronous operation. |
WinUsb_Initialize The WinUsb_Initialize function creates a WinUSB handle for the device specified by a file handle. |
WinUsb_QueryDeviceInformation The WinUsb_QueryDeviceInformation function gets information about the physical device that is associated with a WinUSB interface handle. |
WinUsb_QueryInterfaceSettings The WinUsb_QueryInterfaceSettings function retrieves the interface descriptor for the specified alternate interface settings for a particular interface handle. |
WinUsb_QueryPipe The WinUsb_QueryPipe function retrieves information about the specified endpoint and the associated pipe for an interface. |
WinUsb_QueryPipeEx The WinUsb_QueryPipeEx function retrieves extended information about the specified endpoint and the associated pipe for an interface. |
WinUsb_ReadIsochPipe The WinUsb_ReadIsochPipe function reads data from an isochronous OUT endpoint. |
WinUsb_ReadIsochPipeAsap The WinUsb_ReadIsochPipeAsap function submits a request that reads data from an isochronous OUT endpoint. |
WinUsb_ReadPipe The WinUsb_ReadPipe function reads data from the specified pipe. |
WinUsb_RegisterIsochBuffer The WinUsb_RegisterIsochBuffer function registers a buffer to be used for isochronous transfers. |
WinUsb_ResetPipe The WinUsb_ResetPipe function resets the data toggle and clears the stall condition on a pipe. |
WinUsb_SetCurrentAlternateSetting The WinUsb_SetCurrentAlternateSetting function sets the alternate setting of an interface. |
WinUsb_SetPipePolicy The WinUsb_SetPipePolicy function sets the policy for a specific pipe associated with an endpoint on the device. This is a synchronous operation. |
WinUsb_SetPowerPolicy The WinUsb_SetPowerPolicy function sets the power policy for a device. |
WinUsb_StartTrackingForTimeSync The WinUsb_StartTrackingForTimeSync function starts the time synchronization feature in the USB driver stack that gets the associated system QPC time for USB bus frames and microframes. |
WinUsb_StopTrackingForTimeSync The WinUsb_StopTrackingForTimeSync function tops the time synchronization feature in the USB driver stack that gets the associated system QPC time for USB bus frames and microframes. |
WinUsb_UnregisterIsochBuffer The WinUsb_UnregisterIsochBuffer function releases all of the resources that WinUsb_RegisterIsochBuffer allocated for isochronous transfers. This is a synchronous operation. |
WinUsb_WriteIsochPipe The WinUsb_WriteIsochPipe function writes the contents of a caller-supplied buffer to an isochronous OUT endpoint, starting on a specified frame number. |
WinUsb_WriteIsochPipeAsap The WinUsb_WriteIsochPipeAsap submits a request for writing the contents of a buffer to an isochronous OUT endpoint. |
WinUsb_WritePipe The WinUsb_WritePipe function writes data to a pipe. |
USB_BANDWIDTH_INFO The USB_BANDWIDTH_INFO structure is used with the IOCTL_USB_USER_REQUEST I/O control request to retrieve information about the allocated bandwidth. |
USB_BUS_STATISTICS_0 The USB_BUS_STATISTICS_0 structure is used with the IOCTL_USB_USER_REQUEST I/O control request to retrieve bus statistics. |
USB_CLOSE_RAW_DEVICE_PARAMETERS This structure is not supported. The USB_CLOSE_RAW_DEVICE_PARAMETERS structure is used with the IOCTL_USB_USER_REQUEST I/O control request to close raw access to devices on the bus. |
USB_CONTROLLER_INFO_0 The USB_CONTROLLER_INFO_0 structure is used with the IOCTL_USB_USER_REQUEST I/O control request to retrieve information about the USB host controller. |
USB_DRIVER_VERSION_PARAMETERS The USB_DRIVER_VERSION_PARAMETERS structure is used with the IOCTL_USB_USER_REQUEST I/O control request to retrieve version information. |
USB_PASS_THRU_PARAMETERS The USB_PASS_THRU_PARAMETERS structure is used with the IOCTL_USB_USER_REQUEST I/O control request to pass a vendor-specific command to the host controller miniport driver. |
USB_POWER_INFO The USB_POWER_INFO structure is used with the IOCTL_USB_USER_REQUEST I/O control request to retrieve device power state that the host controller power policy specifies for the indicated system power state. |
USB_UNICODE_NAME The USB_UNICODE_NAME structure contains a Unicode string that specifies a symbolic link name. |
USBUSER_BANDWIDTH_INFO_REQUEST The USBUSER_BANDWIDTH_INFO_REQUEST structure is used with the IOCTL_USB_USER_REQUEST I/O control request to retrieve information about the allocated bandwidth. |
USBUSER_BUS_STATISTICS_0_REQUEST The USBUSER_BUS_STATISTICS_0_REQUEST structure is used with the IOCTL_USB_USER_REQUEST I/O control request to retrieve bus statistics. |
USBUSER_CONTROLLER_UNICODE_NAME The USBUSER_CONTROLLER_UNICODE_NAME structure is used in conjunction with the IOCTL_USB_USER_REQUEST I/O control request to retrieve the USB host controller driverkey name. |
USBUSER_GET_DRIVER_VERSION The USBUSER_GET_DRIVER_VERSION structure is used with the IOCTL_USB_USER_REQUEST I/O control request to read driver and interface version information. |
USBUSER_PASS_THRU_REQUEST The USBUSER_PASS_THRU_REQUEST structure is used in conjunction with the IOCTL_USB_USER_REQUEST I/O control request to send a vendor-specific command to the host controller miniport driver. |
USBUSER_POWER_INFO_REQUEST The USBUSER_POWER_INFO_REQUEST structure is used in conjunction with the IOCTL_USB_USER_REQUEST I/O control request to retrieve power policy information concerning the relationship of a specific system state to the power state of the host controller and the root hub. |
USBUSER_REQUEST_HEADER The USBUSER_REQUEST_HEADER structure is used with the IOCTL_USB_USER_REQUEST I/O control request to send a user-mode request to the USB host controller driver. |
WINUSB_PIPE_INFORMATION The WINUSB_PIPE_INFORMATION structure contains pipe information that the WinUsb_QueryPipe routine retrieves. |
WINUSB_PIPE_INFORMATION_EX The WINUSB_PIPE_INFORMATION_EX structure contains pipe information that the WinUsb_QueryPipeEx routine retrieves. |
WINUSB_SETUP_PACKET The WINUSB_SETUP_PACKET structure describes a USB setup packet. |