String.GetEnumerator Método

Referencia

Definición

Espacio de nombres:: System

Ensamblado:: System.Runtime.dll

Ensamblado:: netstandard.dll

Ensamblado:: mscorlib.dll

Importante

Parte de la información hace referencia a la versión preliminar del producto, que puede haberse modificado sustancialmente antes de lanzar la versión definitiva. Microsoft no otorga ninguna garantía, explícita o implícita, con respecto a la información proporcionada aquí.

Recupera un objeto que puede recorrer en iteración los caracteres individuales de esta cadena.

public:
 CharEnumerator ^ GetEnumerator();

public CharEnumerator GetEnumerator ();

member this.GetEnumerator : unit -> CharEnumerator

Public Function GetEnumerator () As CharEnumerator

Devoluciones

CharEnumerator

Objeto enumerador.

Ejemplos

En el ejemplo siguiente se recorren en iteración los caracteres en varias cadenas y se muestra información sobre sus caracteres individuales. Usa la construcción de iteración de lenguaje en lugar de una llamada al GetEnumerator método .

using namespace System;

void EnumerateAndDisplay(String^ phrase)
{
   Console::WriteLine("The characters in the string \"{0}\" are:", 
                      phrase);

   int CharCount = 0;
   int controlChars = 0;
   int alphanumeric = 0;
   int punctuation = 0;

   for each (Char ch in phrase) {
      Console::Write("'{0}' ", (! Char::IsControl(ch)) ? ch.ToString() : 
                                "0x" + Convert::ToUInt16(ch).ToString("X4"));
      if (Char::IsLetterOrDigit(ch)) 
         alphanumeric++;
      else if (Char::IsControl(ch)) 
         controlChars++;
      else if (Char::IsPunctuation(ch)) 
         punctuation++;             
      CharCount++;
   }

   Console::WriteLine("\n   Total characters:        {0,3}", CharCount);
   Console::WriteLine("   Alphanumeric characters: {0,3}", alphanumeric);
   Console::WriteLine("   Punctuation characters:  {0,3}", punctuation);
   Console::WriteLine("   Control Characters:      {0,3}\n", controlChars);
}

int main()
{
   EnumerateAndDisplay("Test Case");
   EnumerateAndDisplay("This is a sentence.");
   EnumerateAndDisplay("Has\ttwo\ttabs");
   EnumerateAndDisplay("Two\nnew\nlines");
}
// The example displays the following output:
//    The characters in the string "Test Case" are:
//    'T' 'e' 's' 't' ' ' 'C' 'a' 's' 'e'
//       Total characters:          9
//       Alphanumeric characters:   8
//       Punctuation characters:    0
//       Control Characters:        0
//    
//    The characters in the string "This is a sentence." are:
//    'T' 'h' 'i' 's' ' ' 'i' 's' ' ' 'a' ' ' 's' 'e' 'n' 't' 'e' 'n' 'c' 'e' '.'
//       Total characters:         19
//       Alphanumeric characters:  15
//       Punctuation characters:    1
//       Control Characters:        0
//    
//    The characters in the string "Has       two     tabs" are:
//    'H' 'a' 's' '0x0009' 't' 'w' 'o' '0x0009' 't' 'a' 'b' 's'
//       Total characters:         12
//       Alphanumeric characters:  10
//       Punctuation characters:    0
//       Control Characters:        2
//    
//    The characters in the string "Two
//    new
//    lines" are:
//    'T' 'w' 'o' '0x000A' 'n' 'e' 'w' '0x000A' 'l' 'i' 'n' 'e' 's'
//       Total characters:         13
//       Alphanumeric characters:  11
//       Punctuation characters:    0
//       Control Characters:        2

using System;

class Example
{
   public static void Main() 
   {
      EnumerateAndDisplay("Test Case");
      EnumerateAndDisplay("This is a sentence.");
      EnumerateAndDisplay("Has\ttwo\ttabs" );
      EnumerateAndDisplay("Two\nnew\nlines");
   }

   static void EnumerateAndDisplay(String phrase)
   {
      Console.WriteLine("The characters in the string \"{0}\" are:",
                        phrase);

      int CharCount = 0;
      int controlChars = 0;
      int alphanumeric = 0;
      int punctuation = 0;

      foreach (var ch in phrase) {
         Console.Write(Char.IsControl(ch) ? $"{ch}" : $"0x{(ushort)ch:X4}");

         if (Char.IsLetterOrDigit(ch)) 
            alphanumeric++;
         else if (Char.IsControl(ch)) 
            controlChars++;
         else if (Char.IsPunctuation(ch)) 
            punctuation++;             
         CharCount++;
      }

      Console.WriteLine("\n   Total characters:        {0,3}", CharCount);
      Console.WriteLine("   Alphanumeric characters: {0,3}", alphanumeric);
      Console.WriteLine("   Punctuation characters:  {0,3}", punctuation);
      Console.WriteLine("   Control Characters:      {0,3}\n", controlChars);
   }
}
// The example displays the following output:
//    The characters in the string "Test Case" are:
//    'T' 'e' 's' 't' ' ' 'C' 'a' 's' 'e'
//       Total characters:          9
//       Alphanumeric characters:   8
//       Punctuation characters:    0
//       Control Characters:        0
//    
//    The characters in the string "This is a sentence." are:
//    'T' 'h' 'i' 's' ' ' 'i' 's' ' ' 'a' ' ' 's' 'e' 'n' 't' 'e' 'n' 'c' 'e' '.'
//       Total characters:         19
//       Alphanumeric characters:  15
//       Punctuation characters:    1
//       Control Characters:        0
//    
//    The characters in the string "Has       two     tabs" are:
//    'H' 'a' 's' '0x0009' 't' 'w' 'o' '0x0009' 't' 'a' 'b' 's'
//       Total characters:         12
//       Alphanumeric characters:  10
//       Punctuation characters:    0
//       Control Characters:        2
//    
//    The characters in the string "Two
//    new
//    lines" are:
//    'T' 'w' 'o' '0x000A' 'n' 'e' 'w' '0x000A' 'l' 'i' 'n' 'e' 's'
//       Total characters:         13
//       Alphanumeric characters:  11
//       Punctuation characters:    0
//       Control Characters:        2

Module Example
   Sub Main()
      EnumerateAndDisplay("Test Case")
      EnumerateAndDisplay("This is a sentence.")
      EnumerateAndDisplay("Has" & vbTab & "two" & vbTab & "tabs")
      EnumerateAndDisplay("Two" & vbLf & "new" & vbLf & "lines")
   End Sub 
       
   Sub EnumerateAndDisplay(phrase As String)
      Console.WriteLine("The characters in the string ""{0}"" are:", phrase)
       
      Dim charCount As Integer = 0
      Dim controlChars As Integer = 0
      Dim alphanumeric As Integer = 0
      Dim punctuation As Integer = 0
        
      For Each ch In phrase          
         Console.Write("'{0}' ", If(Not Char.IsControl(ch), ch, 
                                     "0x" + Convert.ToUInt16(ch).ToString("X4")))
         If Char.IsLetterOrDigit(ch) Then 
            alphanumeric += 1
         Else If Char.IsControl(ch) Then 
            controlChars += 1
         Else If Char.IsPunctuation(ch) Then 
            punctuation += 1             
         End If
         CharCount += 1
      Next

      Console.WriteLine()
      Console.WriteLine("   Total characters:        {0,3}", CharCount)
      Console.WriteLine("   Alphanumeric characters: {0,3}", alphanumeric)
      Console.WriteLine("   Punctuation characters:  {0,3}", punctuation)
      Console.WriteLine("   Control Characters:      {0,3}", controlChars)
      Console.WriteLine()
    End Sub 
End Module 
' This example displays the following output:
'    The characters in the string "Test Case" are:
'    'T' 'e' 's' 't' ' ' 'C' 'a' 's' 'e'
'       Total characters:          9
'       Alphanumeric characters:   8
'       Punctuation characters:    0
'       Control Characters:        0
'    
'    The characters in the string "This is a sentence." are:
'       'T' 'h' 'i' 's' ' ' 'i' 's' ' ' 'a' ' ' 's' 'e' 'n' 't' 'e' 'n' 'c' 'e' '.'
'          Total characters:         19
'          Alphanumeric characters:  15
'          Punctuation characters:    1
'          Control Characters:        0
'       
'       The characters in the string "Has       two     tabs" are:
'       'H' 'a' 's' '0x0009' 't' 'w' 'o' '0x0009' 't' 'a' 'b' 's'
'          Total characters:         12
'          Alphanumeric characters:  10
'          Punctuation characters:    0
'          Control Characters:        2
'       
'       The characters in the string "Two
'       new
'       lines" are:
'       'T' 'w' 'o' '0x000A' 'n' 'e' 'w' '0x000A' 'l' 'i' 'n' 'e' 's'
'          Total characters:         13
'          Alphanumeric characters:  11
'          Punctuation characters:    0
'          Control Characters:        2

Comentarios

Sugerencia

En lugar de llamar al método para recuperar un objeto que luego se usa para enumerar una cadena, debe usar en su lugar la construcción de iteración del lenguaje GetEnumerator CharEnumerator (en C#, en C++/CLR y en Visual Basic). foreach en C#, para cada en C++/CLR y For Each en Visual Basic).

Este método permite iterar los caracteres individuales de una cadena. Por ejemplo, las instrucciones Visual Basic y C# invocan este método para devolver un objeto que puede proporcionar acceso de solo lectura a los caracteres de esta instancia For Each foreach de CharEnumerator cadena.

Se aplica a