Interlocked.CompareExchange Método
Definición
Importante
Parte de la información hace referencia a la versión preliminar del producto, que puede haberse modificado sustancialmente antes de lanzar la versión definitiva. Microsoft no otorga ninguna garantía, explícita o implícita, con respecto a la información proporcionada aquí.
Compara dos valores para comprobar si son iguales y, si lo son, reemplaza el primer valor.
Sobrecargas
CompareExchange(UIntPtr, UIntPtr, UIntPtr) |
Compara dos identificadores o punteros específicos de la plataforma en términos de igualdad y, si son iguales, reemplaza el primero. |
CompareExchange(UInt64, UInt64, UInt64) |
Compara los dos enteros sin signo de 64 bits para determinar si son iguales y, si lo son, reemplaza el primer valor. |
CompareExchange(UInt32, UInt32, UInt32) |
Compara los dos enteros sin signo de 32 bits para determinar si son iguales y, si lo son, reemplaza el primer valor. |
CompareExchange(UInt16, UInt16, UInt16) | |
CompareExchange(Single, Single, Single) |
Compara dos números de punto flotante de precisión sencilla para comprobar si son iguales y, si lo son, reemplaza el primero de los valores. |
CompareExchange(Object, Object, Object) |
Compara dos objetos en términos de igualdad de referencia y, si son iguales, reemplaza el primero. |
CompareExchange(SByte, SByte, SByte) | |
CompareExchange(Int64, Int64, Int64) |
Compara dos enteros de 64 bits con signo para comprobar si son iguales y, si lo son, reemplaza el primer valor. |
CompareExchange(Int32, Int32, Int32) |
Compara dos enteros de 32 bits con signo para comprobar si son iguales y, si lo son, reemplaza el primer valor. |
CompareExchange(Int16, Int16, Int16) | |
CompareExchange(Double, Double, Double) |
Compara dos números de punto flotante de precisión doble para comprobar si son iguales y, si lo son, reemplaza el primero de los valores. |
CompareExchange(Byte, Byte, Byte) | |
CompareExchange(IntPtr, IntPtr, IntPtr) |
Compara dos identificadores o punteros específicos de la plataforma en términos de igualdad y, si son iguales, reemplaza el primero. |
CompareExchange<T>(T, T, T) |
Compara dos instancias del tipo de referencia especificado |
CompareExchange(UIntPtr, UIntPtr, UIntPtr)
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
Importante
Esta API no es conforme a CLS.
Compara dos identificadores o punteros específicos de la plataforma en términos de igualdad y, si son iguales, reemplaza el primero.
public:
static UIntPtr CompareExchange(UIntPtr % location1, UIntPtr value, UIntPtr comparand);
[System.CLSCompliant(false)]
public static UIntPtr CompareExchange (ref UIntPtr location1, UIntPtr value, UIntPtr comparand);
[<System.CLSCompliant(false)>]
static member CompareExchange : unativeint * unativeint * unativeint -> unativeint
Public Shared Function CompareExchange (ByRef location1 As UIntPtr, value As UIntPtr, comparand As UIntPtr) As UIntPtr
Parámetros
- location1
-
UIntPtr
unativeint
Estructura UIntPtr de destino, cuyo valor se compara con el valor de comparand
y que posiblemente se reemplace por value
.
- value
-
UIntPtr
unativeint
Estructura UIntPtr que reemplaza el valor de destino si la comparación da como resultado una igualdad.
Devoluciones
unativeint
Valor original de location1
.
- Atributos
Excepciones
La dirección de location1
es un puntero null
.
Se aplica a
CompareExchange(UInt64, UInt64, UInt64)
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
Importante
Esta API no es conforme a CLS.
Compara los dos enteros sin signo de 64 bits para determinar si son iguales y, si lo son, reemplaza el primer valor.
public:
static System::UInt64 CompareExchange(System::UInt64 % location1, System::UInt64 value, System::UInt64 comparand);
[System.CLSCompliant(false)]
public static ulong CompareExchange (ref ulong location1, ulong value, ulong comparand);
[<System.CLSCompliant(false)>]
static member CompareExchange : uint64 * uint64 * uint64 -> uint64
Public Shared Function CompareExchange (ByRef location1 As ULong, value As ULong, comparand As ULong) As ULong
Parámetros
- location1
- UInt64
Destino, cuyo valor se compara con comparand
y que posiblemente se reemplace.
- value
- UInt64
Valor que reemplaza el valor de destino si la comparación da como resultado una igualdad.
- comparand
- UInt64
Valor que se compara con el valor que hay en location1
.
Devoluciones
Valor original de location1
.
- Atributos
Excepciones
La dirección de location1
es un puntero null
.
Se aplica a
CompareExchange(UInt32, UInt32, UInt32)
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
Importante
Esta API no es conforme a CLS.
Compara los dos enteros sin signo de 32 bits para determinar si son iguales y, si lo son, reemplaza el primer valor.
public:
static System::UInt32 CompareExchange(System::UInt32 % location1, System::UInt32 value, System::UInt32 comparand);
[System.CLSCompliant(false)]
public static uint CompareExchange (ref uint location1, uint value, uint comparand);
[<System.CLSCompliant(false)>]
static member CompareExchange : uint32 * uint32 * uint32 -> uint32
Public Shared Function CompareExchange (ByRef location1 As UInteger, value As UInteger, comparand As UInteger) As UInteger
Parámetros
- location1
- UInt32
Destino, cuyo valor se compara con comparand
y que posiblemente se reemplace.
- value
- UInt32
Valor que reemplaza el valor de destino si la comparación da como resultado una igualdad.
- comparand
- UInt32
Valor que se compara con el valor que hay en location1
.
Devoluciones
Valor original de location1
.
- Atributos
Excepciones
La dirección de location1
es un puntero null
.
Se aplica a
CompareExchange(UInt16, UInt16, UInt16)
Importante
Esta API no es conforme a CLS.
public:
static System::UInt16 CompareExchange(System::UInt16 % location1, System::UInt16 value, System::UInt16 comparand);
[System.CLSCompliant(false)]
public static ushort CompareExchange (ref ushort location1, ushort value, ushort comparand);
[<System.CLSCompliant(false)>]
static member CompareExchange : uint16 * uint16 * uint16 -> uint16
Public Shared Function CompareExchange (ByRef location1 As UShort, value As UShort, comparand As UShort) As UShort
Parámetros
- location1
- UInt16
- value
- UInt16
- comparand
- UInt16
Devoluciones
- Atributos
Se aplica a
CompareExchange(Single, Single, Single)
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
Compara dos números de punto flotante de precisión sencilla para comprobar si son iguales y, si lo son, reemplaza el primero de los valores.
public:
static float CompareExchange(float % location1, float value, float comparand);
public static float CompareExchange (ref float location1, float value, float comparand);
static member CompareExchange : single * single * single -> single
Public Shared Function CompareExchange (ByRef location1 As Single, value As Single, comparand As Single) As Single
Parámetros
- location1
- Single
Destino, cuyo valor se compara con comparand
y que posiblemente se reemplace.
- value
- Single
Valor que reemplaza el valor de destino si la comparación da como resultado una igualdad.
- comparand
- Single
Valor que se compara con el valor que hay en location1
.
Devoluciones
Valor original de location1
.
Excepciones
La dirección de location1
es un puntero nulo.
Ejemplos
En el ejemplo de código siguiente se muestra un método seguro para subprocesos que acumula un total de Single valores en ejecución. Dos subprocesos agregan una serie de Single valores mediante el método seguro para subprocesos y la adición normal, y cuando los subprocesos completan los totales se comparan. En un equipo de doble procesador, hay una diferencia significativa en los totales.
En el método seguro para subprocesos, se guarda el valor inicial del total en ejecución y, a continuación, se usa el CompareExchange método para intercambiar el total recién calculado con el total anterior. Si el valor devuelto no es igual al valor guardado del total en ejecución, otro subproceso ha actualizado el total mientras tanto. En ese caso, se debe repetir el intento de actualizar el total en ejecución.
// This example demonstrates a thread-safe method that adds to a
// running total.
using System;
using System.Threading;
public class ThreadSafe
{
// Field totalValue contains a running total that can be updated
// by multiple threads. It must be protected from unsynchronized
// access.
private float totalValue = 0.0F;
// The Total property returns the running total.
public float Total { get { return totalValue; }}
// AddToTotal safely adds a value to the running total.
public float AddToTotal(float addend)
{
float initialValue, computedValue;
do
{
// Save the current running total in a local variable.
initialValue = totalValue;
// Add the new value to the running total.
computedValue = initialValue + addend;
// CompareExchange compares totalValue to initialValue. If
// they are not equal, then another thread has updated the
// running total since this loop started. CompareExchange
// does not update totalValue. CompareExchange returns the
// contents of totalValue, which do not equal initialValue,
// so the loop executes again.
}
while (initialValue != Interlocked.CompareExchange(ref totalValue,
computedValue, initialValue));
// If no other thread updated the running total, then
// totalValue and initialValue are equal when CompareExchange
// compares them, and computedValue is stored in totalValue.
// CompareExchange returns the value that was in totalValue
// before the update, which is equal to initialValue, so the
// loop ends.
// The function returns computedValue, not totalValue, because
// totalValue could be changed by another thread between
// the time the loop ends and the function returns.
return computedValue;
}
}
public class Test
{
// Create an instance of the ThreadSafe class to test.
private static ThreadSafe ts = new ThreadSafe();
private static float control;
private static Random r = new Random();
private static ManualResetEvent mre = new ManualResetEvent(false);
public static void Main()
{
// Create two threads, name them, and start them. The
// thread will block on mre.
Thread t1 = new Thread(TestThread);
t1.Name = "Thread 1";
t1.Start();
Thread t2 = new Thread(TestThread);
t2.Name = "Thread 2";
t2.Start();
// Now let the threads begin adding random numbers to
// the total.
mre.Set();
// Wait until all the threads are done.
t1.Join();
t2.Join();
Console.WriteLine("Thread safe: {0} Ordinary float: {1}",
ts.Total, control);
}
private static void TestThread()
{
// Wait until the signal.
mre.WaitOne();
for(int i = 1; i <= 1000000; i++)
{
// Add to the running total in the ThreadSafe instance, and
// to an ordinary float.
//
float testValue = (float) r.NextDouble();
control += testValue;
ts.AddToTotal(testValue);
}
}
}
/* On a dual-processor computer, this code example produces output
similar to the following:
Thread safe: 17039.57 Ordinary float: 15706.44
*/
' This example demonstrates a thread-safe method that adds to a
' running total.
Imports System.Threading
Public Class ThreadSafe
' Field totalValue contains a running total that can be updated
' by multiple threads. It must be protected from unsynchronized
' access.
Private totalValue As Single = 0.0
' The Total property returns the running total.
Public ReadOnly Property Total As Single
Get
Return totalValue
End Get
End Property
' AddToTotal safely adds a value to the running total.
Public Function AddToTotal(ByVal addend As Single) As Single
Dim initialValue, computedValue As Single
Do
' Save the current running total in a local variable.
initialValue = totalValue
' Add the new value to the running total.
computedValue = initialValue + addend
' CompareExchange compares totalValue to initialValue. If
' they are not equal, then another thread has updated the
' running total since this loop started. CompareExchange
' does not update totalValue. CompareExchange returns the
' contents of totalValue, which do not equal initialValue,
' so the loop executes again.
Loop While initialValue <> Interlocked.CompareExchange( _
totalValue, computedValue, initialValue)
' If no other thread updated the running total, then
' totalValue and initialValue are equal when CompareExchange
' compares them, and computedValue is stored in totalValue.
' CompareExchange returns the value that was in totalValue
' before the update, which is equal to initialValue, so the
' loop ends.
' The function returns computedValue, not totalValue, because
' totalValue could be changed by another thread between
' the time the loop ends and the function returns.
Return computedValue
End Function
End Class
Public Class Test
' Create an instance of the ThreadSafe class to test.
Private Shared ts As New ThreadSafe()
Private Shared control As Single
Private Shared r As New Random()
Private Shared mre As New ManualResetEvent(false)
<MTAThread> _
Public Shared Sub Main()
' Create two threads, name them, and start them. The
' threads will block on mre.
Dim t1 As New Thread(AddressOf TestThread)
t1.Name = "Thread 1"
t1.Start()
Dim t2 As New Thread(AddressOf TestThread)
t2.Name = "Thread 2"
t2.Start()
' Now let the threads begin adding random numbers to
' the total.
mre.Set()
' Wait until all the threads are done.
t1.Join()
t2.Join()
Console.WriteLine("Thread safe: {0} Ordinary Single: {1}", ts.Total, control)
End Sub
Private Shared Sub TestThread()
' Wait until the signal.
mre.WaitOne()
For i As Integer = 1 to 1000000
' Add to the running total in the ThreadSafe instance, and
' to an ordinary Single.
'
Dim testValue As Single = r.NextDouble()
control += testValue
ts.AddToTotal(testValue)
Next
End Sub
End Class
' On a dual-processor computer, this code example produces output
' similar to the following:
'
'Thread safe: 17039.57 Ordinary Single: 15706.44
Comentarios
Si comparand
y el valor de location1
son iguales, value
se almacena en location1
. De lo contrario, no se realiza ninguna operación. Las operaciones de comparación e intercambio se realizan como una operación atómica. El valor devuelto de CompareExchange es el valor original en location1
, independientemente de si el intercambio tiene lugar o no.
Consulte también
Se aplica a
CompareExchange(Object, Object, Object)
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
- Source:
- Interlocked.CoreCLR.cs
Compara dos objetos en términos de igualdad de referencia y, si son iguales, reemplaza el primero.
public:
static System::Object ^ CompareExchange(System::Object ^ % location1, System::Object ^ value, System::Object ^ comparand);
public static object CompareExchange (ref object location1, object value, object comparand);
public static object? CompareExchange (ref object? location1, object? value, object? comparand);
static member CompareExchange : obj * obj * obj -> obj
Public Shared Function CompareExchange (ByRef location1 As Object, value As Object, comparand As Object) As Object
Parámetros
- location1
- Object
Objeto de destino que se compara por referencia con comparand
y que posiblemente se reemplace.
- value
- Object
Objeto que reemplaza el objeto de destino si la comparación de referencia da como resultado la igualdad de ambos parámetros.
- comparand
- Object
Objeto que se compara por referencia con el objeto que hay en location1
.
Devoluciones
Valor original de location1
.
Excepciones
La dirección de location1
es un puntero null
.
Comentarios
Importante
A partir de .NET Framework 2.0, la sobrecarga del método CompareExchange<T>(T, T, T) proporciona una alternativa de seguridad de tipos para tipos de referencia. Se recomienda llamarlo en lugar de esta sobrecarga.
Si comparand
y el objeto de location1
son iguales por referencia, value
se almacena en location1
. De lo contrario, no se realiza ninguna operación. Las operaciones de comparación e intercambio se realizan como una operación atómica. El valor devuelto de CompareExchange es el valor original en location1
, independientemente de si el intercambio tiene lugar o no.
Nota
Los objetos se comparan con la igualdad de referencia en lugar de la igualdad de valores. Como resultado, dos instancias con conversión boxed del mismo tipo de valor (por ejemplo, el entero 3) siempre parecen ser diferentes y no se realiza ninguna operación. No use esta sobrecarga con tipos de valor.
Consulte también
Se aplica a
CompareExchange(SByte, SByte, SByte)
Importante
Esta API no es conforme a CLS.
public:
static System::SByte CompareExchange(System::SByte % location1, System::SByte value, System::SByte comparand);
[System.CLSCompliant(false)]
public static sbyte CompareExchange (ref sbyte location1, sbyte value, sbyte comparand);
[<System.CLSCompliant(false)>]
static member CompareExchange : sbyte * sbyte * sbyte -> sbyte
Public Shared Function CompareExchange (ByRef location1 As SByte, value As SByte, comparand As SByte) As SByte
Parámetros
- location1
- SByte
- value
- SByte
- comparand
- SByte
Devoluciones
- Atributos
Se aplica a
CompareExchange(Int64, Int64, Int64)
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
- Source:
- Interlocked.CoreCLR.cs
Compara dos enteros de 64 bits con signo para comprobar si son iguales y, si lo son, reemplaza el primer valor.
public:
static long CompareExchange(long % location1, long value, long comparand);
public static long CompareExchange (ref long location1, long value, long comparand);
static member CompareExchange : int64 * int64 * int64 -> int64
Public Shared Function CompareExchange (ByRef location1 As Long, value As Long, comparand As Long) As Long
Parámetros
- location1
- Int64
Destino, cuyo valor se compara con comparand
y que posiblemente se reemplace.
- value
- Int64
Valor que reemplaza el valor de destino si la comparación da como resultado una igualdad.
- comparand
- Int64
Valor que se compara con el valor que hay en location1
.
Devoluciones
Valor original de location1
.
Excepciones
La dirección de location1
es un puntero nulo.
Comentarios
Si comparand
y el valor de location1
son iguales, value
se almacena en location1
. De lo contrario, no se realiza ninguna operación. Las operaciones de comparación e intercambio se realizan como una operación atómica. El valor devuelto de CompareExchange es el valor original en location1
, independientemente de si el intercambio tiene lugar o no.
Consulte también
Se aplica a
CompareExchange(Int32, Int32, Int32)
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
- Source:
- Interlocked.CoreCLR.cs
Compara dos enteros de 32 bits con signo para comprobar si son iguales y, si lo son, reemplaza el primer valor.
public:
static int CompareExchange(int % location1, int value, int comparand);
public static int CompareExchange (ref int location1, int value, int comparand);
static member CompareExchange : int * int * int -> int
Public Shared Function CompareExchange (ByRef location1 As Integer, value As Integer, comparand As Integer) As Integer
Parámetros
- location1
- Int32
Destino, cuyo valor se compara con comparand
y que posiblemente se reemplace.
- value
- Int32
Valor que reemplaza el valor de destino si la comparación da como resultado una igualdad.
- comparand
- Int32
Valor que se compara con el valor que hay en location1
.
Devoluciones
Valor original de location1
.
Excepciones
La dirección de location1
es un puntero nulo.
Ejemplos
En el ejemplo de código siguiente se muestra un método seguro para subprocesos que acumula un total en ejecución. El valor inicial del total en ejecución se guarda y, a continuación, se usa el CompareExchange método para intercambiar el total calculado recientemente con el total anterior. Si el valor devuelto no es igual al valor guardado del total en ejecución, otro subproceso ha actualizado el total mientras tanto. En ese caso, se debe repetir el intento de actualizar el total en ejecución.
Nota
El Add método, introducido en la versión 2.0 de .NET Framework, proporciona una manera más cómoda de acumular totales de ejecución seguros para subprocesos para enteros.
// This example demonstrates a thread-safe method that adds to a
// running total. It cannot be run directly. You can compile it
// as a library, or add the class to a project.
#using <system.dll>
using namespace System::Threading;
public ref class ThreadSafe
{
private:
// totalValue contains a running total that can be updated
// by multiple threads. It must be protected from unsynchronized
// access.
int totalValue;
public:
property int Total
{
// The Total property returns the running total.
int get()
{
return totalValue;
}
}
// AddToTotal safely adds a value to the running total.
int AddToTotal( int addend )
{
int initialValue;
int computedValue;
do
{
// Save the current running total in a local variable.
initialValue = totalValue;
// Add the new value to the running total.
computedValue = initialValue + addend;
// CompareExchange compares totalValue to initialValue. If
// they are not equal, then another thread has updated the
// running total since this loop started. CompareExchange
// does not update totalValue. CompareExchange returns the
// contents of totalValue, which do not equal initialValue,
// so the loop executes again.
}
while ( initialValue != Interlocked::CompareExchange( totalValue, computedValue, initialValue ) );
// If no other thread updated the running total, then
// totalValue and initialValue are equal when CompareExchange
// compares them, and computedValue is stored in totalValue.
// CompareExchange returns the value that was in totalValue
// before the update, which is equal to initialValue, so the
// loop ends.
// The function returns computedValue, not totalValue, because
// totalValue could be changed by another thread between
// the time the loop ends and the function returns.
return computedValue;
}
};
// This example demonstrates a thread-safe method that adds to a
// running total. It cannot be run directly. You can compile it
// as a library, or add the class to a project.
using System.Threading;
public class ThreadSafe {
// totalValue contains a running total that can be updated
// by multiple threads. It must be protected from unsynchronized
// access.
private int totalValue = 0;
// The Total property returns the running total.
public int Total {
get { return totalValue; }
}
// AddToTotal safely adds a value to the running total.
public int AddToTotal(int addend) {
int initialValue, computedValue;
do {
// Save the current running total in a local variable.
initialValue = totalValue;
// Add the new value to the running total.
computedValue = initialValue + addend;
// CompareExchange compares totalValue to initialValue. If
// they are not equal, then another thread has updated the
// running total since this loop started. CompareExchange
// does not update totalValue. CompareExchange returns the
// contents of totalValue, which do not equal initialValue,
// so the loop executes again.
} while (initialValue != Interlocked.CompareExchange(
ref totalValue, computedValue, initialValue));
// If no other thread updated the running total, then
// totalValue and initialValue are equal when CompareExchange
// compares them, and computedValue is stored in totalValue.
// CompareExchange returns the value that was in totalValue
// before the update, which is equal to initialValue, so the
// loop ends.
// The function returns computedValue, not totalValue, because
// totalValue could be changed by another thread between
// the time the loop ends and the function returns.
return computedValue;
}
}
' This example demonstrates a thread-safe method that adds to a
' running total. It cannot be run directly. You can compile it
' as a library, or add the class to a project.
Imports System.Threading
Public Class ThreadSafe
' Field totalValue contains a running total that can be updated
' by multiple threads. It must be protected from unsynchronized
' access.
Private totalValue As Integer = 0
' The Total property returns the running total.
Public ReadOnly Property Total As Integer
Get
Return totalValue
End Get
End Property
' AddToTotal safely adds a value to the running total.
Public Function AddToTotal(ByVal addend As Integer) As Integer
Dim initialValue, computedValue As Integer
Do
' Save the current running total in a local variable.
initialValue = totalValue
' Add the new value to the running total.
computedValue = initialValue + addend
' CompareExchange compares totalValue to initialValue. If
' they are not equal, then another thread has updated the
' running total since this loop started. CompareExchange
' does not update totalValue. CompareExchange returns the
' contents of totalValue, which do not equal initialValue,
' so the loop executes again.
Loop While initialValue <> Interlocked.CompareExchange( _
totalValue, computedValue, initialValue)
' If no other thread updated the running total, then
' totalValue and initialValue are equal when CompareExchange
' compares them, and computedValue is stored in totalValue.
' CompareExchange returns the value that was in totalValue
' before the update, which is equal to initialValue, so the
' loop ends.
' The function returns computedValue, not totalValue, because
' totalValue could be changed by another thread between
' the time the loop ends and the function returns.
Return computedValue
End Function
End Class
Comentarios
Si comparand
y el valor de location1
son iguales, value
se almacena en location1
. De lo contrario, no se realiza ninguna operación. Las operaciones de comparación e intercambio se realizan como una operación atómica. El valor devuelto de CompareExchange es el valor original en location1
, independientemente de si el intercambio tiene lugar o no.
Consulte también
Se aplica a
CompareExchange(Int16, Int16, Int16)
public:
static short CompareExchange(short % location1, short value, short comparand);
public static short CompareExchange (ref short location1, short value, short comparand);
static member CompareExchange : int16 * int16 * int16 -> int16
Public Shared Function CompareExchange (ByRef location1 As Short, value As Short, comparand As Short) As Short
Parámetros
- location1
- Int16
- value
- Int16
- comparand
- Int16
Devoluciones
Se aplica a
CompareExchange(Double, Double, Double)
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
Compara dos números de punto flotante de precisión doble para comprobar si son iguales y, si lo son, reemplaza el primero de los valores.
public:
static double CompareExchange(double % location1, double value, double comparand);
public static double CompareExchange (ref double location1, double value, double comparand);
static member CompareExchange : double * double * double -> double
Public Shared Function CompareExchange (ByRef location1 As Double, value As Double, comparand As Double) As Double
Parámetros
- location1
- Double
Destino, cuyo valor se compara con comparand
y que posiblemente se reemplace.
- value
- Double
Valor que reemplaza el valor de destino si la comparación da como resultado una igualdad.
- comparand
- Double
Valor que se compara con el valor que hay en location1
.
Devoluciones
Valor original de location1
.
Excepciones
La dirección de location1
es un puntero nulo.
Ejemplos
En el ejemplo de código siguiente se muestra un método seguro para subprocesos que acumula un total de Double valores en ejecución. Dos subprocesos agregan una serie de Double valores mediante el método seguro para subprocesos y la suma normal, y cuando los subprocesos completan los totales se comparan. En un equipo de procesador dual, hay una diferencia significativa en los totales.
En el método seguro para subprocesos, se guarda el valor inicial del total en ejecución y, a continuación, se usa el CompareExchange método para intercambiar el total recién calculado con el total anterior. Si el valor devuelto no es igual al valor guardado del total en ejecución, otro subproceso ha actualizado el total mientras tanto. En ese caso, se debe repetir el intento de actualizar el total en ejecución.
// This example demonstrates a thread-safe method that adds to a
// running total.
using System;
using System.Threading;
public class ThreadSafe
{
// Field totalValue contains a running total that can be updated
// by multiple threads. It must be protected from unsynchronized
// access.
private double totalValue = 0.0;
// The Total property returns the running total.
public double Total { get { return totalValue; }}
// AddToTotal safely adds a value to the running total.
public double AddToTotal(double addend)
{
double initialValue, computedValue;
do
{
// Save the current running total in a local variable.
initialValue = totalValue;
// Add the new value to the running total.
computedValue = initialValue + addend;
// CompareExchange compares totalValue to initialValue. If
// they are not equal, then another thread has updated the
// running total since this loop started. CompareExchange
// does not update totalValue. CompareExchange returns the
// contents of totalValue, which do not equal initialValue,
// so the loop executes again.
}
while (initialValue != Interlocked.CompareExchange(ref totalValue,
computedValue, initialValue));
// If no other thread updated the running total, then
// totalValue and initialValue are equal when CompareExchange
// compares them, and computedValue is stored in totalValue.
// CompareExchange returns the value that was in totalValue
// before the update, which is equal to initialValue, so the
// loop ends.
// The function returns computedValue, not totalValue, because
// totalValue could be changed by another thread between
// the time the loop ends and the function returns.
return computedValue;
}
}
public class Test
{
// Create an instance of the ThreadSafe class to test.
private static ThreadSafe ts = new ThreadSafe();
private static double control;
private static Random r = new Random();
private static ManualResetEvent mre = new ManualResetEvent(false);
public static void Main()
{
// Create two threads, name them, and start them. The
// thread will block on mre.
Thread t1 = new Thread(TestThread);
t1.Name = "Thread 1";
t1.Start();
Thread t2 = new Thread(TestThread);
t2.Name = "Thread 2";
t2.Start();
// Now let the threads begin adding random numbers to
// the total.
mre.Set();
// Wait until all the threads are done.
t1.Join();
t2.Join();
Console.WriteLine("Thread safe: {0} Ordinary Double: {1}",
ts.Total, control);
}
private static void TestThread()
{
// Wait until the signal.
mre.WaitOne();
for(int i = 1; i <= 1000000; i++)
{
// Add to the running total in the ThreadSafe instance, and
// to an ordinary double.
//
double testValue = r.NextDouble();
control += testValue;
ts.AddToTotal(testValue);
}
}
}
/* On a dual-processor computer, this code example produces output
similar to the following:
Thread safe: 998068.049623744 Ordinary Double: 759775.417190589
*/
' This example demonstrates a thread-safe method that adds to a
' running total.
Imports System.Threading
Public Class ThreadSafe
' Field totalValue contains a running total that can be updated
' by multiple threads. It must be protected from unsynchronized
' access.
Private totalValue As Double = 0.0
' The Total property returns the running total.
Public ReadOnly Property Total As Double
Get
Return totalValue
End Get
End Property
' AddToTotal safely adds a value to the running total.
Public Function AddToTotal(ByVal addend As Double) As Double
Dim initialValue, computedValue As Double
Do
' Save the current running total in a local variable.
initialValue = totalValue
' Add the new value to the running total.
computedValue = initialValue + addend
' CompareExchange compares totalValue to initialValue. If
' they are not equal, then another thread has updated the
' running total since this loop started. CompareExchange
' does not update totalValue. CompareExchange returns the
' contents of totalValue, which do not equal initialValue,
' so the loop executes again.
Loop While initialValue <> Interlocked.CompareExchange( _
totalValue, computedValue, initialValue)
' If no other thread updated the running total, then
' totalValue and initialValue are equal when CompareExchange
' compares them, and computedValue is stored in totalValue.
' CompareExchange returns the value that was in totalValue
' before the update, which is equal to initialValue, so the
' loop ends.
' The function returns computedValue, not totalValue, because
' totalValue could be changed by another thread between
' the time the loop ends and the function returns.
Return computedValue
End Function
End Class
Public Class Test
' Create an instance of the ThreadSafe class to test.
Private Shared ts As New ThreadSafe()
Private Shared control As Double
Private Shared r As New Random()
Private Shared mre As New ManualResetEvent(false)
<MTAThread> _
Public Shared Sub Main()
' Create two threads, name them, and start them. The
' threads will block on mre.
Dim t1 As New Thread(AddressOf TestThread)
t1.Name = "Thread 1"
t1.Start()
Dim t2 As New Thread(AddressOf TestThread)
t2.Name = "Thread 2"
t2.Start()
' Now let the threads begin adding random numbers to
' the total.
mre.Set()
' Wait until all the threads are done.
t1.Join()
t2.Join()
Console.WriteLine("Thread safe: {0} Ordinary Double: {1}", ts.Total, control)
End Sub
Private Shared Sub TestThread()
' Wait until the signal.
mre.WaitOne()
For i As Integer = 1 to 1000000
' Add to the running total in the ThreadSafe instance, and
' to an ordinary double.
'
Dim testValue As Double = r.NextDouble
control += testValue
ts.AddToTotal(testValue)
Next
End Sub
End Class
' On a dual-processor computer, this code example produces output
' similar to the following:
'
'Thread safe: 998068.049623744 Ordinary Double: 759775.417190589
Comentarios
Si comparand
y el valor de location1
son iguales, value
se almacena en location1
. De lo contrario, no se realiza ninguna operación. Las operaciones de comparación e intercambio se realizan como una operación atómica. El valor devuelto de CompareExchange es el valor original en location1
, independientemente de si el intercambio tiene lugar o no.
Consulte también
Se aplica a
CompareExchange(Byte, Byte, Byte)
public:
static System::Byte CompareExchange(System::Byte % location1, System::Byte value, System::Byte comparand);
public static byte CompareExchange (ref byte location1, byte value, byte comparand);
static member CompareExchange : byte * byte * byte -> byte
Public Shared Function CompareExchange (ByRef location1 As Byte, value As Byte, comparand As Byte) As Byte
Parámetros
- location1
- Byte
- value
- Byte
- comparand
- Byte
Devoluciones
Se aplica a
CompareExchange(IntPtr, IntPtr, IntPtr)
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
- Source:
- Interlocked.cs
Compara dos identificadores o punteros específicos de la plataforma en términos de igualdad y, si son iguales, reemplaza el primero.
public:
static IntPtr CompareExchange(IntPtr % location1, IntPtr value, IntPtr comparand);
public static IntPtr CompareExchange (ref IntPtr location1, IntPtr value, IntPtr comparand);
static member CompareExchange : nativeint * nativeint * nativeint -> nativeint
Public Shared Function CompareExchange (ByRef location1 As IntPtr, value As IntPtr, comparand As IntPtr) As IntPtr
Parámetros
- location1
-
IntPtr
nativeint
Estructura IntPtr de destino, cuyo valor se compara con el valor de comparand
y que posiblemente se reemplace por value
.
- value
-
IntPtr
nativeint
Estructura IntPtr que reemplaza el valor de destino si la comparación da como resultado una igualdad.
Devoluciones
nativeint
Valor original de location1
.
Excepciones
La dirección de location1
es un puntero nulo.
Comentarios
Si comparand
y el valor de location1
son iguales, value
se almacena en location1
. De lo contrario, no se realiza ninguna operación. Las operaciones de comparación e intercambio se realizan como una operación atómica. El valor devuelto de este método es el valor original en location1
, independientemente de si el intercambio tiene lugar o no.
Nota
IntPtr es un tipo específico de la plataforma.
Consulte también
Se aplica a
CompareExchange<T>(T, T, T)
- Source:
- Interlocked.CoreCLR.cs
- Source:
- Interlocked.CoreCLR.cs
- Source:
- Interlocked.CoreCLR.cs
Compara dos instancias del tipo de referencia especificado T
para comprobar si las referencias son iguales y, si lo son, reemplaza la primera.
public:
generic <typename T>
where T : class static T CompareExchange(T % location1, T value, T comparand);
public static T CompareExchange<T> (ref T location1, T value, T comparand) where T : class;
[System.Runtime.InteropServices.ComVisible(false)]
public static T CompareExchange<T> (ref T location1, T value, T comparand) where T : class;
static member CompareExchange : 'T * 'T * 'T -> 'T (requires 'T : null)
[<System.Runtime.InteropServices.ComVisible(false)>]
static member CompareExchange : 'T * 'T * 'T -> 'T (requires 'T : null)
Public Shared Function CompareExchange(Of T As Class) (ByRef location1 As T, value As T, comparand As T) As T
Parámetros de tipo
- T
Tipo que se va a utilizar para location1
, value
y comparand
. Este tipo debe ser un tipo de referencia.
Parámetros
- location1
- T
Destino cuyo valor se compara por referencia con comparand
y que posiblemente se reemplace. Este es un parámetro de referencia (ref
en C#, ByRef
en Visual Basic).
- value
- T
Valor que reemplaza el valor de destino si la comparación por referencia da como resultado una igualdad.
- comparand
- T
Valor que se compara por referencia con el que hay en location1
.
Devoluciones
Valor original de location1
.
- Atributos
Excepciones
La dirección de location1
es un puntero nulo.
Comentarios
Si comparand
y el valor de location1
son iguales por referencia, value
se almacena en location1
. De lo contrario, no se realiza ninguna operación. La comparación y el intercambio se realizan como una operación atómica. El valor devuelto de este método es el valor original en location1
, independientemente de si el intercambio tiene lugar o no.
Este método solo admite tipos de referencia. Hay sobrecargas del CompareExchange método para los tipos Int32de valor , Int64, IntPtr, Singley Double, pero no hay compatibilidad con otros tipos de valor.
Nota
Esta sobrecarga de método es preferible a la sobrecarga del CompareExchange(Object, Object, Object) método, ya que esta última requiere que se tenga acceso al objeto de destino enlazado en tiempo de ejecución.
Se aplica a
Comentarios
https://aka.ms/ContentUserFeedback.
Próximamente: A lo largo de 2024 iremos eliminando gradualmente GitHub Issues como mecanismo de comentarios sobre el contenido y lo sustituiremos por un nuevo sistema de comentarios. Para más información, vea:Enviar y ver comentarios de