Sockets

Artículo
07/14/2023

Los sockets son una tecnología de transferencia de datos de bajo nivel sobre la que se implementan muchos protocolos de red. UWP ofrece las clases de socket TCP y UDP para aplicaciones cliente-servidor o de punto a punto, tanto si las conexiones son de larga duración o no se necesita una conexión establecida.

Este tema se centra en cómo usar las clases de socket de la Plataforma universal de Windows (UWP) que se encuentran en el espacio de nombres Windows.Networking.Sockets. Pero también puede usar Windows Sockets 2 (Winsock) en una aplicación para UWP.

Nota

Como consecuencia del aislamiento de red, Windows deshabilita establecer una conexión de socket (Sockets o WinSock) entre dos aplicaciones para UWP que se ejecuten en el mismo equipo, ya sea mediante la dirección de bucle invertido local (127.0.0.0) o especificando explícitamente la dirección IP local. Para obtener más información acerca de los mecanismos por los que las aplicaciones para UWP pueden comunicarse entre sí, consulte Comunicación entre aplicaciones.

Compilar servidor y un cliente de socket TCP básico

Un socket TCP (Protocolo de control de transmisión) proporciona transferencias de datos de red de bajo nivel en cualquier dirección para conexiones de larga duración. Los sockets TCP son la característica subyacente que usan la mayoría de los protocolos de red que se utilizan en Internet. Para demostrar las operaciones básicas de TCP, el código de ejemplo siguiente muestra un StreamSocket y un StreamSocketListener que envía y recibe datos a través de TCP para formar un servidor y un cliente de eco.

Para comenzar con el menor número posible de partes móviles y eludir problemas de aislamiento de red en el presente, cree un nuevo proyecto y coloque el código de cliente y servidor siguiente en el mismo proyecto.

Debe declarar una funcionalidad de aplicación en su proyecto. Abra su archivo de origen de manifiesto del paquete de su aplicación (el archivo Package.appxmanifest) y, en la pestaña Funcionalidades, comprueba Redes privadas (cliente y servidor). Este es el aspecto que tiene en la Package.appxmanifest revisión.

<Capability Name="privateNetworkClientServer" />

En su lugar privateNetworkClientServer, puede declarar internetClientServer si se conecta a través de internet. StreamSocket y StreamSocketListener necesitan declarar una u otra de estas funcionalidades de aplicación.

Un servidor y cliente de eco, que use sockets TCP

Construya un StreamSocketListener y comience a escuchar las conexiones TCP entrantes. El evento StreamSocketListener.ConnectionReceived se genera cada vez que un cliente establece una conexión con el StreamSocketListener.

También construir un StreamSocket, establece una conexión con el servidor, envía una solicitud y recibe una respuesta.

Cree una nueva Página con nombre StreamSocketAndListenerPage. Coloque la revisión XAML en StreamSocketAndListenerPage.xaml y coloque el código impera dentro de la StreamSocketAndListenerPage clase.

<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
    <Grid.RowDefinitions>
        <RowDefinition Height="Auto"/>
        <RowDefinition Height="*"/>
    </Grid.RowDefinitions>

    <StackPanel>
        <TextBlock Margin="9.6,0" Style="{StaticResource TitleTextBlockStyle}" Text="TCP socket example"/>
        <TextBlock Margin="7.2,0,0,0" Style="{StaticResource HeaderTextBlockStyle}" Text="StreamSocket &amp; StreamSocketListener"/>
    </StackPanel>

    <Grid Grid.Row="1">
        <Grid.RowDefinitions>
            <RowDefinition/>
            <RowDefinition/>
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="*"/>
            <ColumnDefinition Width="*"/>
        </Grid.ColumnDefinitions>
        <TextBlock Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="client"/>
        <ListBox x:Name="clientListBox" Grid.Row="1" Margin="9.6"/>
        <TextBlock Grid.Column="1" Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="server"/>
        <ListBox x:Name="serverListBox" Grid.Column="1" Grid.Row="1" Margin="9.6"/>
    </Grid>
</Grid>

// Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
// For this example, we'll choose an arbitrary port number.
static string PortNumber = "1337";

protected override void OnNavigatedTo(NavigationEventArgs e)
{
    this.StartServer();
    this.StartClient();
}

private async void StartServer()
{
    try
    {
        var streamSocketListener = new Windows.Networking.Sockets.StreamSocketListener();

        // The ConnectionReceived event is raised when connections are received.
        streamSocketListener.ConnectionReceived += this.StreamSocketListener_ConnectionReceived;

        // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
        await streamSocketListener.BindServiceNameAsync(StreamSocketAndListenerPage.PortNumber);

        this.serverListBox.Items.Add("server is listening...");
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.serverListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void StreamSocketListener_ConnectionReceived(Windows.Networking.Sockets.StreamSocketListener sender, Windows.Networking.Sockets.StreamSocketListenerConnectionReceivedEventArgs args)
{
    string request;
    using (var streamReader = new StreamReader(args.Socket.InputStream.AsStreamForRead()))
    {
        request = await streamReader.ReadLineAsync();
    }

    await this.Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => this.serverListBox.Items.Add(string.Format("server received the request: \"{0}\"", request)));

    // Echo the request back as the response.
    using (Stream outputStream = args.Socket.OutputStream.AsStreamForWrite())
    {
        using (var streamWriter = new StreamWriter(outputStream))
        {
            await streamWriter.WriteLineAsync(request);
            await streamWriter.FlushAsync();
        }
    }

    await this.Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => this.serverListBox.Items.Add(string.Format("server sent back the response: \"{0}\"", request)));

    sender.Dispose();

    await this.Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => this.serverListBox.Items.Add("server closed its socket"));
}

private async void StartClient()
{
    try
    {
        // Create the StreamSocket and establish a connection to the echo server.
        using (var streamSocket = new Windows.Networking.Sockets.StreamSocket())
        {
            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            var hostName = new Windows.Networking.HostName("localhost");

            this.clientListBox.Items.Add("client is trying to connect...");

            await streamSocket.ConnectAsync(hostName, StreamSocketAndListenerPage.PortNumber);

            this.clientListBox.Items.Add("client connected");

            // Send a request to the echo server.
            string request = "Hello, World!";
            using (Stream outputStream = streamSocket.OutputStream.AsStreamForWrite())
            {
                using (var streamWriter = new StreamWriter(outputStream))
                {
                    await streamWriter.WriteLineAsync(request);
                    await streamWriter.FlushAsync();
                }
            }

            this.clientListBox.Items.Add(string.Format("client sent the request: \"{0}\"", request));

            // Read data from the echo server.
            string response;
            using (Stream inputStream = streamSocket.InputStream.AsStreamForRead())
            {
                using (StreamReader streamReader = new StreamReader(inputStream))
                {
                    response = await streamReader.ReadLineAsync();
                }
            }

            this.clientListBox.Items.Add(string.Format("client received the response: \"{0}\" ", response));
        }

        this.clientListBox.Items.Add("client closed its socket");
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.clientListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Windows.UI.Core.h>
#include <winrt/Windows.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener m_streamSocketListener;
    Windows::Networking::Sockets::StreamSocket m_streamSocket;

public:
    void OnNavigatedTo(NavigationEventArgs const& /* e */)
    {
        StartServer();
        StartClient();
    }

private:
    IAsyncAction StartServer()
    {
        try
        {
            // The ConnectionReceived event is raised when connections are received.
            m_streamSocketListener.ConnectionReceived({ this, &StreamSocketAndListenerPage::OnConnectionReceived });

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            // Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
            // For this example, we'll choose an arbitrary port number.
            co_await m_streamSocketListener.BindServiceNameAsync(L"1337");
            serverListBox().Items().Append(winrt::box_value(L"server is listening..."));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    IAsyncAction OnConnectionReceived(Windows::Networking::Sockets::StreamSocketListener /* sender */, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs args)
    {
        try
        {
            auto socket{ args.Socket() }; // Keep the socket referenced, and alive.
            DataReader dataReader{ socket.InputStream() };

            unsigned int bytesLoaded = co_await dataReader.LoadAsync(sizeof(unsigned int));

            unsigned int stringLength = dataReader.ReadUInt32();
            bytesLoaded = co_await dataReader.LoadAsync(stringLength);
            winrt::hstring request = dataReader.ReadString(bytesLoaded);

            serverListBox().Dispatcher().RunAsync(CoreDispatcherPriority::Normal, [=]()
            {
                std::wstringstream wstringstream;
                wstringstream << L"server received the request: \"" << request.c_str() << L"\"";
                serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
            });

            // Echo the request back as the response.
            DataWriter dataWriter{ socket.OutputStream() };
            dataWriter.WriteUInt32(request.size());
            dataWriter.WriteString(request);
            co_await dataWriter.StoreAsync();
            dataWriter.DetachStream();

            serverListBox().Dispatcher().RunAsync(CoreDispatcherPriority::Normal, [=]()
            {
                std::wstringstream wstringstream;
                wstringstream << L"server sent back the response: \"" << request.c_str() << L"\"";
                serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
            });

            m_streamSocketListener = nullptr;

            serverListBox().Dispatcher().RunAsync(CoreDispatcherPriority::Normal, [=]()
            {
                serverListBox().Items().Append(winrt::box_value(L"server closed its socket"));
            });
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Dispatcher().RunAsync(CoreDispatcherPriority::Normal, [=]()
            {
                serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
            });
        }
    }

    IAsyncAction StartClient()
    {
        try
        {
            // Establish a connection to the echo server.

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            Windows::Networking::HostName hostName{ L"localhost" };

            clientListBox().Items().Append(winrt::box_value(L"client is trying to connect..."));

            co_await m_streamSocket.ConnectAsync(hostName, L"1337");
            clientListBox().Items().Append(winrt::box_value(L"client connected"));

            // Send a request to the echo server.
            DataWriter dataWriter{ m_streamSocket.OutputStream() };
            winrt::hstring request{ L"Hello, World!" };
            dataWriter.WriteUInt32(request.size());
            dataWriter.WriteString(request);

            co_await dataWriter.StoreAsync();

            std::wstringstream wstringstream;
            wstringstream << L"client sent the request: \"" << request.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            co_await dataWriter.FlushAsync();
            dataWriter.DetachStream();

            // Read data from the echo server.
            DataReader dataReader{ m_streamSocket.InputStream() };
            unsigned int bytesLoaded = co_await dataReader.LoadAsync(sizeof(unsigned int));
            unsigned int stringLength = dataReader.ReadUInt32();
            bytesLoaded = co_await dataReader.LoadAsync(stringLength);
            winrt::hstring response{ dataReader.ReadString(bytesLoaded) };

            wstringstream.str(L"");
            wstringstream << L"client received the response: \"" << response.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            m_streamSocket = nullptr;

            clientListBox().Items().Append(winrt::box_value(L"client closed its socket"));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener^ streamSocketListener;
    Windows::Networking::Sockets::StreamSocket^ streamSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->StartServer();
        this->StartClient();
    }

private:
    void StartServer()
    {
        try
        {
            this->streamSocketListener = ref new Windows::Networking::Sockets::StreamSocketListener();

            // The ConnectionReceived event is raised when connections are received.
            streamSocketListener->ConnectionReceived += ref new TypedEventHandler<Windows::Networking::Sockets::StreamSocketListener^, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^>(this, &StreamSocketAndListenerPage::StreamSocketListener_ConnectionReceived);

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            // Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
            // For this example, we'll choose an arbitrary port number.
            Concurrency::create_task(streamSocketListener->BindServiceNameAsync(L"1337")).then(
                [=]
            {
                this->serverListBox->Items->Append(L"server is listening...");
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
    {
        try
        {
            auto dataReader = ref new DataReader(args->Socket->InputStream);

            Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
                [=](unsigned int bytesLoaded)
            {
                unsigned int stringLength = dataReader->ReadUInt32();
                Concurrency::create_task(dataReader->LoadAsync(stringLength)).then(
                    [=](unsigned int bytesLoaded)
                {
                    Platform::String^ request = dataReader->ReadString(bytesLoaded);
                    this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                        [=]
                    {
                        std::wstringstream wstringstream;
                        wstringstream << L"server received the request: \"" << request->Data() << L"\"";
                        this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                    }));

                    // Echo the request back as the response.
                    auto dataWriter = ref new DataWriter(args->Socket->OutputStream);
                    dataWriter->WriteUInt32(request->Length());
                    dataWriter->WriteString(request);
                    Concurrency::create_task(dataWriter->StoreAsync()).then(
                        [=](unsigned int)
                    {
                        dataWriter->DetachStream();

                        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                            [=]()
                        {
                            std::wstringstream wstringstream;
                            wstringstream << L"server sent back the response: \"" << request->Data() << L"\"";
                            this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                        }));

                        delete this->streamSocketListener;
                        this->streamSocketListener = nullptr;

                        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(L"server closed its socket"); }));
                    });
                });
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message); }));
        }
    }

    void StartClient()
    {
        try
        {
            // Create the StreamSocket and establish a connection to the echo server.
            this->streamSocket = ref new Windows::Networking::Sockets::StreamSocket();

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            auto hostName = ref new Windows::Networking::HostName(L"localhost");

            this->clientListBox->Items->Append(L"client is trying to connect...");

            Concurrency::create_task(this->streamSocket->ConnectAsync(hostName, L"1337")).then(
                [=](Concurrency::task< void >)
            {
                this->clientListBox->Items->Append(L"client connected");

                // Send a request to the echo server.
                auto dataWriter = ref new DataWriter(this->streamSocket->OutputStream);
                auto request = ref new Platform::String(L"Hello, World!");
                dataWriter->WriteUInt32(request->Length());
                dataWriter->WriteString(request);

                Concurrency::create_task(dataWriter->StoreAsync()).then(
                    [=](Concurrency::task< unsigned int >)
                {
                    std::wstringstream wstringstream;
                    wstringstream << L"client sent the request: \"" << request->Data() << L"\"";
                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                    Concurrency::create_task(dataWriter->FlushAsync()).then(
                        [=](Concurrency::task< bool >)
                    {
                        dataWriter->DetachStream();

                        // Read data from the echo server.
                        auto dataReader = ref new DataReader(this->streamSocket->InputStream);
                        Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
                            [=](unsigned int bytesLoaded)
                        {
                            unsigned int stringLength = dataReader->ReadUInt32();
                            Concurrency::create_task(dataReader->LoadAsync(stringLength)).then(
                                [=](unsigned int bytesLoaded)
                            {
                                Platform::String^ response = dataReader->ReadString(bytesLoaded);
                                this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                                    [=]
                                {
                                    std::wstringstream wstringstream;
                                    wstringstream << L"client received the response: \"" << response->Data() << L"\"";
                                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                                    delete this->streamSocket;
                                    this->streamSocket = nullptr;

                                    this->clientListBox->Items->Append(L"client closed its socket");
                                }));
                            });
                        });
                    });
                });
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

Referencias a StreamSockets en las continuaciones de C++ PPL (se aplica a C++/CX, principalmente)

Nota

Si usa corrutinas C++/WinRT, y pasa parámetros por valor, este problema no se aplicable. Para las recomendaciones de pase de parámetros, consulte Operaciones simultáneas y asincrónicas con C++/WinRT.

Un StreamSocket permanece activo siempre que existe una lectura y escritura activa en su secuencia de entrada y salida (tomemos por ejemplo StreamSocketListenerConnectionReceivedEventArgs.Socket al que tiene acceso en su controlador de eventos StreamSocketListener.ConnectionReceived). Cuando llame a DataReader.LoadAsync (o ReadAsync/WriteAsync/StoreAsync), esta contiene una referencia al socket (a través de la secuencia de entrada del socket) hasta que el controlador de eventos Completed (de haberlo) del LoadAsync termina de ejecutarse.

La biblioteca de tramas de procesamiento paralelo (PPL) no programa continuaciones de tareas programadas en línea de manera predeterminada. En otras palabras, agregar una tarea de continuación (con task::then()) no garantiza que la tarea de continuación se ejecutará en línea como el controlador de finalización.

void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
{
    auto dataReader = ref new DataReader(args->Socket->InputStream);
    Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
        [=](unsigned int bytesLoaded)
    {
        // Work in here isn't guaranteed to execute inline as the completion handler of the LoadAsync.
    });
}

Desde la perspectiva de la StreamSocket, el controlador de finalización se realiza en ejecución (y el socket es apto para su eliminación) antes de que se ejecuta el cuerpo de la continuación. Por lo tanto, para evitar que el socket se elimine si quiere usarlo dentro de esa continuación, necesita hacer referencia al socket directamente (a través de la captura de lambda) y usarla, o indirectamente (continuar accediendo a args->Socket dentro de continuaciones), o forzar tareas de continuación para que estar en línea. Puede ver la primera técnica (captura de lambda) en acción en la muestra de StreamSocket . El código C++/CX de la sección anterior Compilación de un servidor y cliente básico de socket TCP usa la segunda técnica: refleja la solicitud como una respuesta y accede a args->Socket desde dentro de una de las continuaciones más internas.

La tercera técnica es apropiada cuando no está reproduciendo una respuesta. Use la opción task_continuation_context::use_synchronous_execution() para forzar PPL a ejecutar el cuerpo de continuación en línea. Este es un ejemplo de código que muestra cómo hacerlo.

void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
{
    auto dataReader = ref new DataReader(args->Socket->InputStream);

    Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
        [=](unsigned int bytesLoaded)
    {
        unsigned int messageLength = dataReader->ReadUInt32();
        Concurrency::create_task(dataReader->LoadAsync(messageLength)).then(
            [=](unsigned int bytesLoaded)
        {
            Platform::String^ request = dataReader->ReadString(bytesLoaded);
            this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                [=]
            {
                std::wstringstream wstringstream;
                wstringstream << L"server received the request: \"" << request->Data() << L"\"";
                this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
            }));
        });
    }, Concurrency::task_continuation_context::use_synchronous_execution());
}

Este comportamiento se aplica a todos los sockets y clases WebSockets en el espacio de nombres Windows.Networking.Sockets. Pero los escenarios del lado cliente suelen almacenar sockets en variables de miembros, por lo que el problema se aplica más al escenario de StreamSocketListener.ConnectionReceived, como se ilustra anteriormente.

Compilar un servidor y cliente de socket UDP básico

Un socket UDP (Protocolo de datagramas de usuario) se parece a un socket TCP en que también proporciona transferencias de datos de red de bajo nivel en cualquier dirección. Sin embargo, si bien un socket TCP es para las conexiones de larga duración, un socket UDP es para aplicaciones donde no se requiere una conexión establecida. Dado que los sockets UDP no mantienen la conexión en ambos puntos de conexión, son una solución rápida y sencilla para redes entre equipos remotos. Pero los sockets UDP no garantizan la integridad de los paquetes de red incluso si los paquetes llegan al destino remoto. Por lo tanto, su aplicación tendrá que diseñarse para tolerar eso. Algunos ejemplos de aplicaciones que usan sockets UDP son la detección de redes locales y los clientes de chat locales.

Para demostrar las operaciones básicas de UDP, el código de ejemplo siguiente muestra la clase DatagramSocket que se va a utilizar para enviar y recibir datos sobre UDP para formar un servidor y un cliente de eco. Cree un nuevo proyecto y coloque el código de cliente y servidor que se incluyen a continuación en el mismo proyecto. Al igual que sucede con socket TCP, tendrá que declarar la funcionalidad de la aplicación Redes privadas (cliente y servidor).

Un servidor y cliente de eco, con sockets UDP

Construya un DatagramSocket para reproducir el rol de servidor de eco, enlácelo a un número de puerto específico, escuche un mensaje UDP entrante y devuélvalo en eco. El evento DatagramSocket.MessageReceived se genera cuando se recibe un mensaje en el socket.

Construya otro DatagramSocket para reproducir el rol de cliente de eco, enlácelo a un número de puerto específico, envíe un mensaje UDP y reciba una respuesta.

Cree una nueva Página con nombre DatagramSocketPage. Coloque la revisión XAML en DatagramSocketPage.xaml y coloque el código impera dentro de la DatagramSocketPage clase.

<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
    <Grid.RowDefinitions>
        <RowDefinition Height="Auto"/>
        <RowDefinition Height="*"/>
    </Grid.RowDefinitions>

    <StackPanel>
        <TextBlock Margin="9.6,0" Style="{StaticResource TitleTextBlockStyle}" Text="UDP socket example"/>
        <TextBlock Margin="7.2,0,0,0" Style="{StaticResource HeaderTextBlockStyle}" Text="DatagramSocket"/>
    </StackPanel>

    <Grid Grid.Row="1">
        <Grid.RowDefinitions>
            <RowDefinition/>
            <RowDefinition/>
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="*"/>
            <ColumnDefinition Width="*"/>
        </Grid.ColumnDefinitions>
        <TextBlock Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="client"/>
        <ListBox x:Name="clientListBox" Grid.Row="1" Margin="9.6"/>
        <TextBlock Grid.Column="1" Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="server"/>
        <ListBox x:Name="serverListBox" Grid.Column="1" Grid.Row="1" Margin="9.6"/>
    </Grid>
</Grid>

// Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
// For this example, we'll choose different arbitrary port numbers for client and server, since both will be running on the same machine.
static string ClientPortNumber = "1336";
static string ServerPortNumber = "1337";

protected override void OnNavigatedTo(NavigationEventArgs e)
{
    this.StartServer();
    this.StartClient();
}

private async void StartServer()
{
    try
    {
        var serverDatagramSocket = new Windows.Networking.Sockets.DatagramSocket();

        // The ConnectionReceived event is raised when connections are received.
        serverDatagramSocket.MessageReceived += ServerDatagramSocket_MessageReceived;

        this.serverListBox.Items.Add("server is about to bind...");

        // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
        await serverDatagramSocket.BindServiceNameAsync(DatagramSocketPage.ServerPortNumber);

        this.serverListBox.Items.Add(string.Format("server is bound to port number {0}", DatagramSocketPage.ServerPortNumber));
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.serverListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void ServerDatagramSocket_MessageReceived(Windows.Networking.Sockets.DatagramSocket sender, Windows.Networking.Sockets.DatagramSocketMessageReceivedEventArgs args)
{
    string request;
    using (DataReader dataReader = args.GetDataReader())
    {
        request = dataReader.ReadString(dataReader.UnconsumedBufferLength).Trim();
    }

    await this.Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => this.serverListBox.Items.Add(string.Format("server received the request: \"{0}\"", request)));

    // Echo the request back as the response.
    using (Stream outputStream = (await sender.GetOutputStreamAsync(args.RemoteAddress, DatagramSocketPage.ClientPortNumber)).AsStreamForWrite())
    {
        using (var streamWriter = new StreamWriter(outputStream))
        {
            await streamWriter.WriteLineAsync(request);
            await streamWriter.FlushAsync();
        }
    }

    await this.Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => this.serverListBox.Items.Add(string.Format("server sent back the response: \"{0}\"", request)));

    sender.Dispose();

    await this.Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => this.serverListBox.Items.Add("server closed its socket"));
}

private async void StartClient()
{
    try
    {
        // Create the DatagramSocket and establish a connection to the echo server.
        var clientDatagramSocket = new Windows.Networking.Sockets.DatagramSocket();

        clientDatagramSocket.MessageReceived += ClientDatagramSocket_MessageReceived;

        // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
        var hostName = new Windows.Networking.HostName("localhost");

        this.clientListBox.Items.Add("client is about to bind...");

        await clientDatagramSocket.BindServiceNameAsync(DatagramSocketPage.ClientPortNumber);

        this.clientListBox.Items.Add(string.Format("client is bound to port number {0}", DatagramSocketPage.ClientPortNumber));

        // Send a request to the echo server.
        string request = "Hello, World!";
        using (var serverDatagramSocket = new Windows.Networking.Sockets.DatagramSocket())
        {
            using (Stream outputStream = (await serverDatagramSocket.GetOutputStreamAsync(hostName, DatagramSocketPage.ServerPortNumber)).AsStreamForWrite())
            {
                using (var streamWriter = new StreamWriter(outputStream))
                {
                    await streamWriter.WriteLineAsync(request);
                    await streamWriter.FlushAsync();
                }
            }
        }

        this.clientListBox.Items.Add(string.Format("client sent the request: \"{0}\"", request));
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.clientListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void ClientDatagramSocket_MessageReceived(Windows.Networking.Sockets.DatagramSocket sender, Windows.Networking.Sockets.DatagramSocketMessageReceivedEventArgs args)
{
    string response;
    using (DataReader dataReader = args.GetDataReader())
    {
        response = dataReader.ReadString(dataReader.UnconsumedBufferLength).Trim();
    }

    await this.Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => this.clientListBox.Items.Add(string.Format("client received the response: \"{0}\"", response)));

    sender.Dispose();

    await this.Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => this.clientListBox.Items.Add("client closed its socket"));
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Windows.UI.Core.h>
#include <winrt/Windows.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::DatagramSocket m_clientDatagramSocket;
    Windows::Networking::Sockets::DatagramSocket m_serverDatagramSocket;

public:
    void OnNavigatedTo(NavigationEventArgs const& /* e */)
    {
        StartServer();
        StartClient();
    }

private:
    IAsyncAction StartServer()
    {
        try
        {
            // The ConnectionReceived event is raised when connections are received.
            m_serverDatagramSocket.MessageReceived({ this, &DatagramSocketPage::ServerDatagramSocket_MessageReceived });

            serverListBox().Items().Append(winrt::box_value(L"server is about to bind..."));

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            co_await m_serverDatagramSocket.BindServiceNameAsync(L"1337");
            serverListBox().Items().Append(winrt::box_value(L"server is bound to port number 1337"));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    IAsyncAction ServerDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs args)
    {
        DataReader dataReader{ args.GetDataReader() };
        winrt::hstring request{ dataReader.ReadString(dataReader.UnconsumedBufferLength()) };

        serverListBox().Dispatcher().RunAsync(CoreDispatcherPriority::Normal, [=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"server received the request: \"" << request.c_str() << L"\"";
            serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        });

        // Echo the request back as the response.
        IOutputStream outputStream = co_await sender.GetOutputStreamAsync(args.RemoteAddress(), L"1336");
        DataWriter dataWriter{ outputStream };
        dataWriter.WriteString(request);

        co_await dataWriter.StoreAsync();
        dataWriter.DetachStream();

        serverListBox().Dispatcher().RunAsync(CoreDispatcherPriority::Normal, [=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"server sent back the response: \"" << request.c_str() << L"\"";
            serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            m_serverDatagramSocket = nullptr;

            serverListBox().Items().Append(winrt::box_value(L"server closed its socket"));
        });
    }

    IAsyncAction StartClient()
    {
        try
        {
            m_clientDatagramSocket.MessageReceived({ this, &DatagramSocketPage::ClientDatagramSocket_MessageReceived });

            // Establish a connection to the echo server.
            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            Windows::Networking::HostName hostName{ L"localhost" };

            clientListBox().Items().Append(winrt::box_value(L"client is about to bind..."));

            co_await m_clientDatagramSocket.BindServiceNameAsync(L"1336");
            clientListBox().Items().Append(winrt::box_value(L"client is bound to port number 1336"));

            // Send a request to the echo server.
            Windows::Networking::Sockets::DatagramSocket serverDatagramSocket;
            IOutputStream outputStream = co_await m_serverDatagramSocket.GetOutputStreamAsync(hostName, L"1337");

            winrt::hstring request{ L"Hello, World!" };
            DataWriter dataWriter{ outputStream };
            dataWriter.WriteString(request);
            co_await dataWriter.StoreAsync();
            dataWriter.DetachStream();

            std::wstringstream wstringstream;
            wstringstream << L"client sent the request: \"" << request.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    void ClientDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket const& /* sender */, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs const& args)
    {
        DataReader dataReader{ args.GetDataReader() };
        winrt::hstring response{ dataReader.ReadString(dataReader.UnconsumedBufferLength()) };
        clientListBox().Dispatcher().RunAsync(CoreDispatcherPriority::Normal, [=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"client received the response: \"" << response.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        });

        m_clientDatagramSocket = nullptr;

        clientListBox().Dispatcher().RunAsync(CoreDispatcherPriority::Normal, [=]()
        {
            clientListBox().Items().Append(winrt::box_value(L"client closed its socket"));
        });
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::DatagramSocket^ clientDatagramSocket;
    Windows::Networking::Sockets::DatagramSocket^ serverDatagramSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->StartServer();
        this->StartClient();
    }

private:
    void StartServer()
    {
        try
        {
            this->serverDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();

            // The ConnectionReceived event is raised when connections are received.
            this->serverDatagramSocket->MessageReceived += ref new TypedEventHandler<Windows::Networking::Sockets::DatagramSocket^, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^>(this, &DatagramSocketPage::ServerDatagramSocket_MessageReceived);

            this->serverListBox->Items->Append(L"server is about to bind...");

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            Concurrency::create_task(this->serverDatagramSocket->BindServiceNameAsync("1337")).then(
                [=]
            {
                this->serverListBox->Items->Append(L"server is bound to port number 1337");
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void ServerDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket^ sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^ args)
    {
        DataReader^ dataReader = args->GetDataReader();
        Platform::String^ request = dataReader->ReadString(dataReader->UnconsumedBufferLength);
        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
            [=]
        {
            std::wstringstream wstringstream;
            wstringstream << L"server received the request: \"" << request->Data() << L"\"";
            this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
        }));

        // Echo the request back as the response.
        Concurrency::create_task(sender->GetOutputStreamAsync(args->RemoteAddress, "1336")).then(
            [=](IOutputStream^ outputStream)
        {
            auto dataWriter = ref new DataWriter(outputStream);
            dataWriter->WriteString(request);
            Concurrency::create_task(dataWriter->StoreAsync()).then(
                [=](unsigned int)
            {
                dataWriter->DetachStream();

                this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                    [=]()
                {
                    std::wstringstream wstringstream;
                    wstringstream << L"server sent back the response: \"" << request->Data() << L"\"";
                    this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                    delete this->serverDatagramSocket;
                    this->serverDatagramSocket = nullptr;

                    this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(L"server closed its socket"); }));
                }));
            });
        });
    }

    void StartClient()
    {
        try
        {
            // Create the DatagramSocket and establish a connection to the echo server.
            this->clientDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();

            this->clientDatagramSocket->MessageReceived += ref new TypedEventHandler<Windows::Networking::Sockets::DatagramSocket^, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^>(this, &DatagramSocketPage::ClientDatagramSocket_MessageReceived);

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            auto hostName = ref new Windows::Networking::HostName(L"localhost");

            this->clientListBox->Items->Append(L"client is about to bind...");

            Concurrency::create_task(this->clientDatagramSocket->BindServiceNameAsync("1336")).then(
                [=]
            {
                this->clientListBox->Items->Append(L"client is bound to port number 1336");
            });

            // Send a request to the echo server.
            auto serverDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();
            Concurrency::create_task(serverDatagramSocket->GetOutputStreamAsync(hostName, "1337")).then(
                [=](IOutputStream^ outputStream)
            {
                auto request = ref new Platform::String(L"Hello, World!");
                auto dataWriter = ref new DataWriter(outputStream);
                dataWriter->WriteString(request);
                Concurrency::create_task(dataWriter->StoreAsync()).then(
                    [=](unsigned int)
                {
                    dataWriter->DetachStream();
                    std::wstringstream wstringstream;
                    wstringstream << L"client sent the request: \"" << request->Data() << L"\"";
                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                });

            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void ClientDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket^ sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^ args)
    {
        DataReader^ dataReader = args->GetDataReader();
        Platform::String^ response = dataReader->ReadString(dataReader->UnconsumedBufferLength);
        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
            [=]
        {
            std::wstringstream wstringstream;
            wstringstream << L"client received the response: \"" << response->Data() << L"\"";
            this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
        }));

        delete this->clientDatagramSocket;
        this->clientDatagramSocket = nullptr;

        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->clientListBox->Items->Append(L"client closed its socket"); }));
    }

Operaciones en segundo plano y agente de sockets

Puede usar al agente de socket y controlar los desencadenadores de canal, para garantizar que su aplicación reciba correctamente las conexiones o los datos en sockets mientras no estén en primer plano. Para más información, consulte Comunicaciones de red en segundo plano.

Envíos por lotes

Cada vez que escribe en la secuencia asociada con un socket, ocurre una transición desde el modo usuario (su código) al modo kernel (donde está la pila de red). Si está escribiendo muchos búferes a la vez, estas transiciones repetidas se combinan en una sobrecarga considerable. Procesar por lotes sus envíos es una forma para enviar varios búferes de datos juntos y evitar esa sobrecarga. Es especialmente útil si su aplicación está usando VoIP, VPN u otras tareas que implican mover una gran cantidad de datos de la manera más eficaz posible.

Esta sección muestra un par de técnicas de envío por lotes que se puede usar con un StreamSocket o un DatagramSocket conectado.

Para obtener una línea base, veamos cómo enviar un gran número de búferes de forma ineficaz. Aquí se incluye una demostración mínima utilizando un StreamSocket .

protected override async void OnNavigatedTo(NavigationEventArgs e)
{
    var streamSocketListener = new Windows.Networking.Sockets.StreamSocketListener();
    streamSocketListener.ConnectionReceived += this.StreamSocketListener_ConnectionReceived;
    await streamSocketListener.BindServiceNameAsync("1337");

    var streamSocket = new Windows.Networking.Sockets.StreamSocket();
    await streamSocket.ConnectAsync(new Windows.Networking.HostName("localhost"), "1337");
    this.SendMultipleBuffersInefficiently(streamSocket, "Hello, World!");
    //this.BatchedSendsCSharpOnly(streamSocket, "Hello, World!");
    //this.BatchedSendsAnyUWPLanguage(streamSocket, "Hello, World!");
}

private async void StreamSocketListener_ConnectionReceived(Windows.Networking.Sockets.StreamSocketListener sender, Windows.Networking.Sockets.StreamSocketListenerConnectionReceivedEventArgs args)
{
    using (var dataReader = new DataReader(args.Socket.InputStream))
    {
        dataReader.InputStreamOptions = InputStreamOptions.Partial;
        while (true)
        {
            await dataReader.LoadAsync(256);
            if (dataReader.UnconsumedBufferLength == 0) break;
            IBuffer requestBuffer = dataReader.ReadBuffer(dataReader.UnconsumedBufferLength);
            string request = Windows.Security.Cryptography.CryptographicBuffer.ConvertBinaryToString(Windows.Security.Cryptography.BinaryStringEncoding.Utf8, requestBuffer);
            Debug.WriteLine(string.Format("server received the request: \"{0}\"", request));
        }
    }
}

// This implementation incurs kernel transition overhead for each packet written.
private async void SendMultipleBuffersInefficiently(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    foreach (IBuffer packet in packetsToSend)
    {
        await streamSocket.OutputStream.WriteAsync(packet);
    }
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Security.Cryptography.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Windows.UI.Core.h>
#include <winrt/Windows.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener m_streamSocketListener;
    Windows::Networking::Sockets::StreamSocket m_streamSocket;

public:
    IAsyncAction OnNavigatedTo(NavigationEventArgs /* e */)
    {
        m_streamSocketListener.ConnectionReceived({ this, &BatchedSendsPage::OnConnectionReceived });
        co_await m_streamSocketListener.BindServiceNameAsync(L"1337");

        co_await m_streamSocket.ConnectAsync(Windows::Networking::HostName{ L"localhost" }, L"1337");
        SendMultipleBuffersInefficientlyAsync(L"Hello, World!");
        //BatchedSendsAnyUWPLanguageAsync(L"Hello, World!");
    }

private:
    IAsyncAction OnConnectionReceived(Windows::Networking::Sockets::StreamSocketListener const& /* sender */, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs const& args)
    {
        DataReader dataReader{ args.Socket().InputStream() };
        dataReader.InputStreamOptions(Windows::Storage::Streams::InputStreamOptions::Partial);

        while (true)
        {
            unsigned int bytesLoaded = co_await dataReader.LoadAsync(256);
            if (bytesLoaded == 0) break;
            winrt::hstring message{ dataReader.ReadString(bytesLoaded) };
            ::OutputDebugString(message.c_str());
        }
    }

    // This implementation incurs kernel transition overhead for each packet written.
    IAsyncAction SendMultipleBuffersInefficientlyAsync(winrt::hstring message)
    {
        co_await winrt::resume_background();

        std::vector< IBuffer > packetsToSend;
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto const& element : packetsToSend)
        {
            m_streamSocket.OutputStream().WriteAsync(element).get();
        }
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener^ streamSocketListener;
    Windows::Networking::Sockets::StreamSocket^ streamSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->streamSocketListener = ref new Windows::Networking::Sockets::StreamSocketListener();
        streamSocketListener->ConnectionReceived += ref new TypedEventHandler<Windows::Networking::Sockets::StreamSocketListener^, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^>(this, &BatchedSendsPage::StreamSocketListener_ConnectionReceived);
        Concurrency::create_task(this->streamSocketListener->BindServiceNameAsync(L"1337")).then(
            [=]
        {
            this->streamSocket = ref new Windows::Networking::Sockets::StreamSocket();
            Concurrency::create_task(this->streamSocket->ConnectAsync(ref new Windows::Networking::HostName(L"localhost"), L"1337")).then(
                [=](Concurrency::task< void >)
            {
                this->SendMultipleBuffersInefficiently(L"Hello, World!");
                // this->BatchedSendsAnyUWPLanguage(L"Hello, World!");
            }, Concurrency::task_continuation_context::use_synchronous_execution());
        });
    }

private:
    void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
    {
        auto dataReader = ref new DataReader(args->Socket->InputStream);
        dataReader->InputStreamOptions = Windows::Storage::Streams::InputStreamOptions::Partial;
        this->ReceiveStringRecurse(dataReader, args->Socket);
    }

    void ReceiveStringRecurse(DataReader^ dataReader, Windows::Networking::Sockets::StreamSocket^ streamSocket)
    {
        Concurrency::create_task(dataReader->LoadAsync(256)).then(
            [this, dataReader, streamSocket](unsigned int bytesLoaded)
        {
            if (bytesLoaded == 0) return;
            Platform::String^ message = dataReader->ReadString(bytesLoaded);
            ::OutputDebugString(message->Data());
            this->ReceiveStringRecurse(dataReader, streamSocket);
        });
    }

    // This implementation incurs kernel transition overhead for each packet written.
    void SendMultipleBuffersInefficiently(Platform::String^ message)
    {
        std::vector< IBuffer^ > packetsToSend{};
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto element : packetsToSend)
        {
            Concurrency::create_task(this->streamSocket->OutputStream->WriteAsync(element)).wait();
        }
    }

Este primer ejemplo de una técnica más eficiente solo es adecuado si estás usando C#. Cambia OnNavigatedTo para llamar a BatchedSendsCSharpOnly en lugar de SendMultipleBuffersInefficiently o SendMultipleBuffersInefficientlyAsync.

// A C#-only technique for batched sends.
private async void BatchedSendsCSharpOnly(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    var pendingTasks = new System.Threading.Tasks.Task[packetsToSend.Count];

    for (int index = 0; index < packetsToSend.Count; ++index)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingTasks[index] = streamSocket.OutputStream.WriteAsync(packetsToSend[index]).AsTask();
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete.
    System.Threading.Tasks.Task.WaitAll(pendingTasks);
}

El siguiente ejemplo es apropiado para cualquier lenguaje UWP, no solo para C#. Se basa en el comportamiento en StreamSocket.OutputStream y DatagramSocket.OutputStream que se envían juntos por lotes. Las llamadas técnicas FlushAsync en ese flujo de salida que, a partir de Windows 10, se garantiza que regrese solo después de que todas las operaciones en el flujo de salida hayan finalizado.

// An implementation of batched sends suitable for any UWP language.
private async void BatchedSendsAnyUWPLanguage(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    var pendingWrites = new IAsyncOperationWithProgress<uint, uint>[packetsToSend.Count];

    for (int index = 0; index < packetsToSend.Count; ++index)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingWrites[index] = streamSocket.OutputStream.WriteAsync(packetsToSend[index]);
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
    await streamSocket.OutputStream.FlushAsync();
}

// An implementation of batched sends suitable for any UWP language.
IAsyncAction BatchedSendsAnyUWPLanguageAsync(winrt::hstring message)
{
    std::vector< IBuffer > packetsToSend{};
    std::vector< IAsyncOperationWithProgress< unsigned int, unsigned int > > pendingWrites{};
    for (unsigned int count = 0; count < 5; ++count)
    {
        packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
    }

    for (auto const& element : packetsToSend)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingWrites.push_back(m_streamSocket.OutputStream().WriteAsync(element));
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
    co_await m_streamSocket.OutputStream().FlushAsync();
}

private:
    // An implementation of batched sends suitable for any UWP language.
    void BatchedSendsAnyUWPLanguage(Platform::String^ message)
    {
        std::vector< IBuffer^ > packetsToSend{};
        std::vector< IAsyncOperationWithProgress< unsigned int, unsigned int >^ >pendingWrites{};
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto element : packetsToSend)
        {
            // track all pending writes as tasks, but don't wait on one before beginning the next.
            pendingWrites.push_back(this->streamSocket->OutputStream->WriteAsync(element));
            // Don't modify any buffer's contents until the pending writes are complete.
        }

        // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
        Concurrency::create_task(this->streamSocket->OutputStream->FlushAsync());
    }

Existen algunas limitaciones importantes impuestas mediante el uso de envíos por lote en el código.

No se puede modificar el contenido de las instancias de IBuffer que se escriben hasta que se completa la escritura asincrónica.
El patrón FlushAsync solo funciona en StreamSocket.OutputStream y DatagramSocket.OutputStream.
La trama FlushAsync solo funciona en Windows 10 y en adelante.
En otros casos, use Task.WaitAll en lugar de la trama FlushAsync.

Puede configurar un DatagramSocket para que coexista con otros sockets de multidifusión de Win32 o UWP enlazados a la misma dirección y puerto. Para ello, configure el DatagramSocketControl.MulticastOnly en true antes de enlazar o conectar el socket. Se accede a una instancia de DatagramSocketControl desde el propio objeto DatagramSocket a través de su propiedad DatagramSocket.Control.

Aprovisionamiento de un certificado de cliente con la clase StreamSocket

StreamSocket admite el uso de SSL/TLS para autenticar el servidor con el que se comunica la aplicación cliente. En algunos casos, la aplicación de cliente debe autenticarse en el servidor mediante un certificado de cliente SSL/TLS. Puede proporcionar un certificado de cliente con la propiedad StreamSocketControl.ClientCertificate antes de enlazar o conectar el socket (se debe establecer antes de que se inicie el protocolo de enlace SSL/TLS). Se accede a una instancia de StreamSocketControl desde el propio objeto StreamSocket a través de su propiedad StreamSocket.Control. Si el servidor solicita el certificado de cliente, Windows responderá con el certificado del cliente proporcionado.

Use una invalidación de StreamSocket.ConnectAsync que toma un SocketProtectionLevel, como se muestra en este ejemplo de código mínimo.

Importante

Como se indica en el comentario de los ejemplos de código siguientes, su proyecto debe declarar la funcionalidad de su aplicación sharedUserCertificates para que funcione este código.

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
var certificateQuery = new Windows.Security.Cryptography.Certificates.CertificateQuery();
certificateQuery.StoreName = "MY";
IReadOnlyList<Windows.Security.Cryptography.Certificates.Certificate> certificates = await Windows.Security.Cryptography.Certificates.CertificateStores.FindAllAsync(certificateQuery);
if (certificates.Count > 0)
{
    streamSocket.Control.ClientCertificate = certificates[0];
    await streamSocket.ConnectAsync(hostName, "1337", Windows.Networking.Sockets.SocketProtectionLevel.Tls12);
}

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
Windows::Security::Cryptography::Certificates::CertificateQuery certificateQuery;
certificateQuery.StoreName(L"MY");
IVectorView< Windows::Security::Cryptography::Certificates::Certificate > certificates = co_await Windows::Security::Cryptography::Certificates::CertificateStores::FindAllAsync(certificateQuery);

if (certificates.Size() > 0)
{
    m_streamSocket.Control().ClientCertificate(certificates.GetAt(0));
    co_await m_streamSocket.ConnectAsync(Windows::Networking::HostName{ L"localhost" }, L"1337", Windows::Networking::Sockets::SocketProtectionLevel::Tls12);
    ...
}

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
auto certificateQuery = ref new Windows::Security::Cryptography::Certificates::CertificateQuery();
certificateQuery->StoreName = L"MY";
Concurrency::create_task(Windows::Security::Cryptography::Certificates::CertificateStores::FindAllAsync(certificateQuery)).then(
    [=](IVectorView< Windows::Security::Cryptography::Certificates::Certificate^ >^ certificates)
{
    if (certificates->Size > 0)
    {
        this->streamSocket->Control->ClientCertificate = certificates->GetAt(0);
        Concurrency::create_task(this->streamSocket->ConnectAsync(ref new Windows::Networking::HostName(L"localhost"), L"1337", Windows::Networking::Sockets::SocketProtectionLevel::Tls12)).then(
            [=]
        {
            ...
        });
    }
});

Control de excepciones

Se encontró un error en una operación DatagramSocket, StreamSocket o StreamSocketListener se devuelve como un valor HRESULT. Puede pasar ese valor HRESULT al método SocketError.GetStatus para convertirlo en un valor de enumeración SocketErrorStatus.

La mayoría de los valores de enumeración SocketErrorStatus corresponden a un error devuelto por la operación de Windows Sockets nativa. Su aplicación puede cambiar en valores de enumeración WebErrorStatus para modificar el comportamiento de la aplicación en función de la causa de la excepción.

Para los errores de validación de parámetros, puedes usar el valor HRESULT de la excepción para obtener información más detallada del error. Los posibles valores HRESULT se muestran en Winerror.h, que se puede encontrar en la instalación del SDK (por ejemplo, en la carpeta C:\Program Files (x86)\Windows Kits\10\Include\<VERSION>\shared). Para la mayoría de los errores de validación de parámetros, el valor de HRESULT que se devuelve es E_INVALIDARG.

El constructor HostName puede arrojar una excepción si la cadena pasada no es un nombre de host válido. Por ejemplo, contiene caracteres no permitidos, lo cual es probable si el usuario escribe el nombre de host en su aplicación. Construya un HostName dentro de un bloque try/catch. De esa forma, si se arroja una excepción, la aplicación puede notificar al usuario y solicitar un nuevo nombre de host.

API importantes

Ejemplos

Muestra StreamSocket

Compartir a través de

Sockets

Compilar servidor y un cliente de socket TCP básico

Un servidor y cliente de eco, que use sockets TCP

Referencias a StreamSockets en las continuaciones de C++ PPL (se aplica a C++/CX, principalmente)

Compilar un servidor y cliente de socket UDP básico

Un servidor y cliente de eco, con sockets UDP

Operaciones en segundo plano y agente de sockets

Envíos por lotes

Aprovisionamiento de un certificado de cliente con la clase StreamSocket

Control de excepciones

API importantes

Ejemplos

Comentarios

Recursos adicionales

Compartir a través de

Sockets

Compilar servidor y un cliente de socket TCP básico

Un servidor y cliente de eco, que use sockets TCP

Referencias a StreamSockets en las continuaciones de C++ PPL (se aplica a C++/CX, principalmente)

Compilar un servidor y cliente de socket UDP básico

Un servidor y cliente de eco, con sockets UDP

Operaciones en segundo plano y agente de sockets

Envíos por lotes

Uso compartido de puertos para DatagramSocket

Aprovisionamiento de un certificado de cliente con la clase StreamSocket

Control de excepciones

API importantes

Temas relacionados

Ejemplos

Comentarios

Recursos adicionales