Compartir vía


SqlBulkCopyColumnMappingCollection.Add Método

Definición

Agrega un nuevo objeto SqlBulkCopyColumnMapping a la colección SqlBulkCopyColumnMappingCollection.

Sobrecargas

Add(SqlBulkCopyColumnMapping)

Agrega la asignación especificada a la colección SqlBulkCopyColumnMappingCollection.

Add(Int32, Int32)

Crea un nuevo objeto SqlBulkCopyColumnMapping y lo agrega a la colección, utilizando las posiciones ordinales para especificar las columnas de origen y de destino.

Add(Int32, String)

Crea un nuevo objeto SqlBulkCopyColumnMapping y lo agrega a la colección, utilizando una posición ordinal para la columna de origen y una cadena para la columna de destino.

Add(String, Int32)

Crea un nuevo objeto SqlBulkCopyColumnMapping y lo agrega a la colección, utilizando un nombre de columna para describir la columna de origen y una posición ordinal para especificar la columna de destino.

Add(String, String)

Crea un nuevo objeto SqlBulkCopyColumnMapping y lo agrega a la colección, utilizando nombres de columna para especificar las columnas de origen y de destino.

Add(SqlBulkCopyColumnMapping)

Agrega la asignación especificada a la colección SqlBulkCopyColumnMappingCollection.

public:
 System::Data::SqlClient::SqlBulkCopyColumnMapping ^ Add(System::Data::SqlClient::SqlBulkCopyColumnMapping ^ bulkCopyColumnMapping);
public System.Data.SqlClient.SqlBulkCopyColumnMapping Add (System.Data.SqlClient.SqlBulkCopyColumnMapping bulkCopyColumnMapping);
member this.Add : System.Data.SqlClient.SqlBulkCopyColumnMapping -> System.Data.SqlClient.SqlBulkCopyColumnMapping
Public Function Add (bulkCopyColumnMapping As SqlBulkCopyColumnMapping) As SqlBulkCopyColumnMapping

Parámetros

bulkCopyColumnMapping
SqlBulkCopyColumnMapping

Objeto SqlBulkCopyColumnMapping que describe la asignación que se va a agregar a la colección.

Devoluciones

Un objeto SqlBulkCopyColumnMapping.

Ejemplos

En el ejemplo siguiente se copian de forma masiva datos de una tabla de origen en la base de datos de ejemplo AdventureWorks a una tabla de destino en la misma base de datos. Aunque el número de columnas del destino coincide con el número de columnas del origen, los nombres de columna y las posiciones ordinales no coinciden. SqlBulkCopyColumnMapping Los objetos se usan para crear un mapa de columnas para la copia masiva.

Importante

Este ejemplo no se ejecuta a menos que haya creado las tablas de trabajo como se describe en Configuración de ejemplos de copia masiva. Este código se proporciona para mostrar la sintaxis para usar SqlBulkCopy. Si las tablas de origen y destino están en la misma instancia de SQL Server, es más fácil y rápido usar una instrucción Transact-SQL INSERT ... SELECT para copiar los datos.

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a sourceConnection to the AdventureWorks database.
        using (SqlConnection sourceConnection =
                   new SqlConnection(connectionString))
        {
            sourceConnection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoDifferentColumns;",
                sourceConnection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Get data from the source table as a SqlDataReader.
            SqlCommand commandSourceData = new SqlCommand(
                "SELECT ProductID, Name, " +
                "ProductNumber " +
                "FROM Production.Product;", sourceConnection);
            SqlDataReader reader =
                commandSourceData.ExecuteReader();

            // Set up the bulk copy object.
            using (SqlBulkCopy bulkCopy =
                       new SqlBulkCopy(connectionString))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoDifferentColumns";

                // Set up the column mappings by name.
                SqlBulkCopyColumnMapping mapID =
                    new SqlBulkCopyColumnMapping("ProductID", "ProdID");
                bulkCopy.ColumnMappings.Add(mapID);

                SqlBulkCopyColumnMapping mapName =
                    new SqlBulkCopyColumnMapping("Name", "ProdName");
                bulkCopy.ColumnMappings.Add(mapName);

                SqlBulkCopyColumnMapping mapMumber =
                    new SqlBulkCopyColumnMapping("ProductNumber", "ProdNum");
                bulkCopy.ColumnMappings.Add(mapMumber);

                // Write from the source to the destination.
                try
                {
                    bulkCopy.WriteToServer(reader);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
                finally
                {
                    // Close the SqlDataReader. The SqlBulkCopy
                    // object is automatically closed at the end
                    // of the using block.
                    reader.Close();
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static string GetConnectionString()
        // To avoid storing the sourceConnection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoDifferentColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Set up the bulk copy object.
            Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
                bulkCopy.DestinationTableName = _
                "dbo.BulkCopyDemoDifferentColumns"

                ' Set up the column mappings by name.
                Dim mapID As New _
                  SqlBulkCopyColumnMapping("ProductID", "ProdID")
                bulkCopy.ColumnMappings.Add(mapID)

                Dim mapName As New _
                 SqlBulkCopyColumnMapping("Name", "ProdName")
                bulkCopy.ColumnMappings.Add(mapName)

                Dim mapMumber As New _
                 SqlBulkCopyColumnMapping("ProductNumber", "ProdNum")
                bulkCopy.ColumnMappings.Add(mapMumber)

                ' Write from the source to the destination.
                Try
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                Finally
                    ' Close the SqlDataReader. The SqlBulkCopy
                    ' object is automatically closed at the end
                    ' of the Using block.
                    reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

Consulte también

Se aplica a

Add(Int32, Int32)

Crea un nuevo objeto SqlBulkCopyColumnMapping y lo agrega a la colección, utilizando las posiciones ordinales para especificar las columnas de origen y de destino.

public:
 System::Data::SqlClient::SqlBulkCopyColumnMapping ^ Add(int sourceColumnIndex, int destinationColumnIndex);
public System.Data.SqlClient.SqlBulkCopyColumnMapping Add (int sourceColumnIndex, int destinationColumnIndex);
member this.Add : int * int -> System.Data.SqlClient.SqlBulkCopyColumnMapping
Public Function Add (sourceColumnIndex As Integer, destinationColumnIndex As Integer) As SqlBulkCopyColumnMapping

Parámetros

sourceColumnIndex
Int32

Posición ordinal de la columna de origen dentro del origen de datos.

destinationColumnIndex
Int32

Posición ordinal de la columna de destino dentro de la tabla de destino.

Devoluciones

Asignación de columnas.

Ejemplos

En el ejemplo siguiente se copian de forma masiva datos de una tabla de origen en la base de datos de ejemplo AdventureWorks a una tabla de destino en la misma base de datos. Aunque el número de columnas del destino coincide con el número de columnas del origen, los nombres de columna y las posiciones ordinales no coinciden. SqlBulkCopyColumnMapping Los objetos se usan para crear un mapa de columnas para la copia masiva mediante la posición ordinal de las columnas de origen y destino.

Importante

Este ejemplo no se ejecuta a menos que haya creado las tablas de trabajo como se describe en Configuración de ejemplos de copia masiva. Este código se proporciona para mostrar la sintaxis para usar SqlBulkCopy. Si las tablas de origen y destino están en la misma instancia de SQL Server, es más fácil y rápido usar una instrucción Transact-SQL INSERT ... SELECT para copiar los datos.

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a sourceConnection to the AdventureWorks database.
        using (SqlConnection sourceConnection =
                   new SqlConnection(connectionString))
        {
            sourceConnection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoDifferentColumns;",
                sourceConnection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Get data from the source table as a SqlDataReader.
            SqlCommand commandSourceData = new SqlCommand(
                "SELECT ProductID, Name, " +
                "ProductNumber " +
                "FROM Production.Product;", sourceConnection);
            SqlDataReader reader =
                commandSourceData.ExecuteReader();

            // Set up the bulk copy object.
            using (SqlBulkCopy bulkCopy =
                       new SqlBulkCopy(connectionString))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoDifferentColumns";

                // The column order in the source doesn't match the order
                // in the destination, so ColumnMappings must be defined.
                bulkCopy.ColumnMappings.Add(0, 0);
                bulkCopy.ColumnMappings.Add(1, 2);
                bulkCopy.ColumnMappings.Add(2, 1);

                // Write from the source to the destination.
                try
                {
                    bulkCopy.WriteToServer(reader);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
                finally
                {
                    // Close the SqlDataReader. The SqlBulkCopy
                    // object is automatically closed at the end
                    // of the using block.
                    reader.Close();
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static string GetConnectionString()
        // To avoid storing the sourceConnection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoDifferentColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Set up the bulk copy object.
            Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
                bulkCopy.DestinationTableName = _
                "dbo.BulkCopyDemoDifferentColumns"

                ' The column order in the source doesn't match the order 
                ' in the destination, so ColumnMappings must be defined.
                bulkCopy.ColumnMappings.Add(0, 0)
                bulkCopy.ColumnMappings.Add(1, 2)
                bulkCopy.ColumnMappings.Add(2, 1)

                ' Write from the source to the destination.
                Try
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                Finally
                    ' Close the SqlDataReader. The SqlBulkCopy
                    ' object is automatically closed at the end
                    ' of the Using block.
                    reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

Comentarios

Las asignaciones de una colección deben ser uniformes: todos los pares enteros o enteros, todos los pares de cadena/cadena, todos los pares enteros o de cadena o todos los pares de cadena/entero. Si intenta agregar una asignación diferente de otras que ya están en la colección, se produce una InvalidOperationException excepción .

Consulte también

Se aplica a

Add(Int32, String)

Crea un nuevo objeto SqlBulkCopyColumnMapping y lo agrega a la colección, utilizando una posición ordinal para la columna de origen y una cadena para la columna de destino.

public:
 System::Data::SqlClient::SqlBulkCopyColumnMapping ^ Add(int sourceColumnIndex, System::String ^ destinationColumn);
public System.Data.SqlClient.SqlBulkCopyColumnMapping Add (int sourceColumnIndex, string destinationColumn);
member this.Add : int * string -> System.Data.SqlClient.SqlBulkCopyColumnMapping
Public Function Add (sourceColumnIndex As Integer, destinationColumn As String) As SqlBulkCopyColumnMapping

Parámetros

sourceColumnIndex
Int32

Posición ordinal de la columna de origen dentro del origen de datos.

destinationColumn
String

Nombre de la columna de destino dentro de la tabla de destino.

Devoluciones

Asignación de columnas.

Ejemplos

En el ejemplo siguiente se copian de forma masiva datos de una tabla de origen en la base de datos de ejemplo AdventureWorks a una tabla de destino en la misma base de datos. Aunque el número de columnas del destino coincide con el número de columnas del origen, los nombres de columna y las posiciones ordinales no coinciden. SqlBulkCopyColumnMapping Los objetos se usan para crear un mapa de columnas para la copia masiva.

Importante

Este ejemplo no se ejecuta a menos que haya creado las tablas de trabajo como se describe en Configuración de ejemplos de copia masiva. Este código se proporciona para mostrar la sintaxis para usar SqlBulkCopy. Si las tablas de origen y destino están en la misma instancia de SQL Server, es más fácil y rápido usar una instrucción Transact-SQL INSERT ... SELECT para copiar los datos.

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a sourceConnection to the AdventureWorks database.
        using (SqlConnection sourceConnection =
                   new SqlConnection(connectionString))
        {
            sourceConnection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoDifferentColumns;",
                sourceConnection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Get data from the source table as a SqlDataReader.
            SqlCommand commandSourceData = new SqlCommand(
                "SELECT ProductID, Name, " +
                "ProductNumber " +
                "FROM Production.Product;", sourceConnection);
            SqlDataReader reader =
                commandSourceData.ExecuteReader();

            // Set up the bulk copy object.
            using (SqlBulkCopy bulkCopy =
                       new SqlBulkCopy(connectionString))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoDifferentColumns";

                // The column order in the source doesn't match the order
                // in the destination, so ColumnMappings must be defined.
                bulkCopy.ColumnMappings.Add(0, "ProdID");
                bulkCopy.ColumnMappings.Add(1, "ProdName");
                bulkCopy.ColumnMappings.Add(2, "ProdNum");

                // Write from the source to the destination.
                try
                {
                    bulkCopy.WriteToServer(reader);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
                finally
                {
                    // Close the SqlDataReader. The SqlBulkCopy
                    // object is automatically closed at the end
                    // of the using block.
                    reader.Close();
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static string GetConnectionString()
        // To avoid storing the sourceConnection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoDifferentColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Set up the bulk copy object.
            Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
                bulkCopy.DestinationTableName = _
                "dbo.BulkCopyDemoDifferentColumns"

                ' The column order in the source doesn't match the order 
                ' in the destination, so ColumnMappings must be defined.
                bulkCopy.ColumnMappings.Add(0, "ProdID")
                bulkCopy.ColumnMappings.Add(1, "ProdName")
                bulkCopy.ColumnMappings.Add(2, "ProdNum")

                ' Write from the source to the destination.
                Try
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                Finally
                    ' Close the SqlDataReader. The SqlBulkCopy
                    ' object is automatically closed at the end
                    ' of the Using block.
                    reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

Comentarios

Las asignaciones de una colección deben ser uniformes: todos los pares enteros o enteros, todos los pares de cadena/cadena, todos los pares enteros o de cadena o todos los pares de cadena/entero. Si intenta agregar una asignación diferente de otras que ya están en la colección, se produce una InvalidOperationException excepción .

Consulte también

Se aplica a

Add(String, Int32)

Crea un nuevo objeto SqlBulkCopyColumnMapping y lo agrega a la colección, utilizando un nombre de columna para describir la columna de origen y una posición ordinal para especificar la columna de destino.

public:
 System::Data::SqlClient::SqlBulkCopyColumnMapping ^ Add(System::String ^ sourceColumn, int destinationColumnIndex);
public System.Data.SqlClient.SqlBulkCopyColumnMapping Add (string sourceColumn, int destinationColumnIndex);
member this.Add : string * int -> System.Data.SqlClient.SqlBulkCopyColumnMapping
Public Function Add (sourceColumn As String, destinationColumnIndex As Integer) As SqlBulkCopyColumnMapping

Parámetros

sourceColumn
String

Nombre de la columna de origen dentro del origen de datos.

destinationColumnIndex
Int32

Posición ordinal de la columna de destino dentro de la tabla de destino.

Devoluciones

Asignación de columnas.

Ejemplos

En el ejemplo siguiente se copian de forma masiva datos de una tabla de origen en la base de datos de ejemplo AdventureWorks a una tabla de destino en la misma base de datos. Aunque el número de columnas del destino coincide con el número de columnas del origen, los nombres de columna y las posiciones ordinales no coinciden. SqlBulkCopyColumnMapping Los objetos se usan para crear un mapa de columnas para la copia masiva.

Importante

Este ejemplo no se ejecuta a menos que haya creado las tablas de trabajo como se describe en Configuración de ejemplos de copia masiva. Este código se proporciona para mostrar la sintaxis para usar SqlBulkCopy. Si las tablas de origen y destino están en la misma instancia de SQL Server, es más fácil y rápido usar una instrucción Transact-SQL INSERT ... SELECT para copiar los datos.

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a sourceConnection to the AdventureWorks database.
        using (SqlConnection sourceConnection =
                   new SqlConnection(connectionString))
        {
            sourceConnection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoDifferentColumns;",
                sourceConnection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Get data from the source table as a SqlDataReader.
            SqlCommand commandSourceData = new SqlCommand(
                "SELECT ProductID, Name, " +
                "ProductNumber " +
                "FROM Production.Product;", sourceConnection);
            SqlDataReader reader =
                commandSourceData.ExecuteReader();

            // Set up the bulk copy object.
            using (SqlBulkCopy bulkCopy =
                       new SqlBulkCopy(connectionString))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoDifferentColumns";

                // The column order in the source doesn't match the order
                // in the destination, so ColumnMappings must be defined.
                bulkCopy.ColumnMappings.Add("ProductID", 0);
                bulkCopy.ColumnMappings.Add("ProductNumber", 1);
                bulkCopy.ColumnMappings.Add("Name", 2);

                // Write from the source to the destination.
                try
                {
                    bulkCopy.WriteToServer(reader);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
                finally
                {
                    // Close the SqlDataReader. The SqlBulkCopy
                    // object is automatically closed at the end
                    // of the using block.
                    reader.Close();
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static string GetConnectionString()
        // To avoid storing the sourceConnection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoDifferentColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Set up the bulk copy object.
            Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
                bulkCopy.DestinationTableName = _
                "dbo.BulkCopyDemoDifferentColumns"

                ' The column order in the source doesn't match the order 
                ' in the destination, so ColumnMappings must be defined.
                bulkCopy.ColumnMappings.Add("ProductID", 0)
                bulkCopy.ColumnMappings.Add("ProductNumber", 1)
                bulkCopy.ColumnMappings.Add("Name", 2)

                ' Write from the source to the destination.
                Try
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                Finally
                    ' Close the SqlDataReader. The SqlBulkCopy
                    ' object is automatically closed at the end
                    ' of the Using block.
                    reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

Comentarios

Las asignaciones de una colección deben ser uniformes: todos los pares enteros o enteros, todos los pares de cadena/cadena, todos los pares enteros o de cadena o todos los pares de cadena/entero. Si intenta agregar una asignación diferente de otras que ya están en la colección, se produce una InvalidOperationException excepción .

Consulte también

Se aplica a

Add(String, String)

Crea un nuevo objeto SqlBulkCopyColumnMapping y lo agrega a la colección, utilizando nombres de columna para especificar las columnas de origen y de destino.

public:
 System::Data::SqlClient::SqlBulkCopyColumnMapping ^ Add(System::String ^ sourceColumn, System::String ^ destinationColumn);
public System.Data.SqlClient.SqlBulkCopyColumnMapping Add (string sourceColumn, string destinationColumn);
member this.Add : string * string -> System.Data.SqlClient.SqlBulkCopyColumnMapping
Public Function Add (sourceColumn As String, destinationColumn As String) As SqlBulkCopyColumnMapping

Parámetros

sourceColumn
String

Nombre de la columna de origen dentro del origen de datos.

destinationColumn
String

Nombre de la columna de destino dentro de la tabla de destino.

Devoluciones

Asignación de columnas.

Ejemplos

En el ejemplo siguiente se copian de forma masiva datos de una tabla de origen en la base de datos de ejemplo AdventureWorks a una tabla de destino en la misma base de datos. Aunque el número de columnas del destino coincide con el número de columnas del origen, los nombres de columna y las posiciones ordinales no coinciden. El código crea un SqlBulkCopyColumnMapping objeto especificando los nombres de columna.

Importante

Este ejemplo no se ejecuta a menos que haya creado las tablas de trabajo como se describe en Configuración de ejemplos de copia masiva. Este código se proporciona para mostrar la sintaxis para usar SqlBulkCopy. Si las tablas de origen y destino están en la misma instancia de SQL Server, es más fácil y rápido usar una instrucción Transact-SQL INSERT ... SELECT para copiar los datos.

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a sourceConnection to the AdventureWorks database.
        using (SqlConnection sourceConnection =
                   new SqlConnection(connectionString))
        {
            sourceConnection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoDifferentColumns;",
                sourceConnection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Get data from the source table as a SqlDataReader.
            SqlCommand commandSourceData = new SqlCommand(
                "SELECT ProductID, Name, " +
                "ProductNumber " +
                "FROM Production.Product;", sourceConnection);
            SqlDataReader reader =
                commandSourceData.ExecuteReader();

            // Set up the bulk copy object.
            using (SqlBulkCopy bulkCopy =
                       new SqlBulkCopy(connectionString))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoDifferentColumns";

                // The column order in the source doesn't match the order
                // in the destination, so ColumnMappings must be defined.
                bulkCopy.ColumnMappings.Add("ProductID", "ProdID");
                bulkCopy.ColumnMappings.Add("Name", "ProdName");
                bulkCopy.ColumnMappings.Add("ProductNumber", "ProdNum");

                // Write from the source to the destination.
                try
                {
                    bulkCopy.WriteToServer(reader);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
                finally
                {
                    // Close the SqlDataReader. The SqlBulkCopy
                    // object is automatically closed at the end
                    // of the using block.
                    reader.Close();
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static string GetConnectionString()
        // To avoid storing the sourceConnection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoDifferentColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Set up the bulk copy object.
            Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
                bulkCopy.DestinationTableName = _
                "dbo.BulkCopyDemoDifferentColumns"

                ' The column order in the source doesn't match the order 
                ' in the destination, so ColumnMappings must be defined.
                bulkCopy.ColumnMappings.Add("ProductID", "ProdID")
                bulkCopy.ColumnMappings.Add("Name", "ProdName")
                bulkCopy.ColumnMappings.Add("ProductNumber", "ProdNum")

                ' Write from the source to the destination.
                Try
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                Finally
                    ' Close the SqlDataReader. The SqlBulkCopy
                    ' object is automatically closed at the end
                    ' of the Using block.
                    reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

Comentarios

Las asignaciones de una colección deben ser uniformes: todos los pares enteros o enteros, todos los pares de cadena/cadena, todos los pares enteros o de cadena o todos los pares de cadena/entero. Si intenta agregar una asignación diferente de otras que ya están en la colección, se produce una InvalidOperationException excepción .

Consulte también

Se aplica a