Compartir vía


Graphics.FillPolygon Método

Definición

Rellena el interior de un polígono definido por una matriz de puntos especificados por Point estructuras.

Sobrecargas

FillPolygon(Brush, ReadOnlySpan<PointF>, FillMode)
FillPolygon(Brush, ReadOnlySpan<Point>, FillMode)
FillPolygon(Brush, PointF[], FillMode)

Rellena el interior de un polígono definido por una matriz de puntos especificados por PointF estructuras mediante el modo de relleno especificado.

FillPolygon(Brush, Point[], FillMode)

Rellena el interior de un polígono definido por una matriz de puntos especificados por Point estructuras mediante el modo de relleno especificado.

FillPolygon(Brush, ReadOnlySpan<Point>)
FillPolygon(Brush, PointF[])

Rellena el interior de un polígono definido por una matriz de puntos especificados por PointF estructuras.

FillPolygon(Brush, Point[])

Rellena el interior de un polígono definido por una matriz de puntos especificados por Point estructuras.

FillPolygon(Brush, ReadOnlySpan<PointF>)

FillPolygon(Brush, ReadOnlySpan<PointF>, FillMode)

Source:
Graphics.cs
Source:
Graphics.cs
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points, System::Drawing::Drawing2D::FillMode fillMode);
public void FillPolygon (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.PointF> points, System.Drawing.Drawing2D.FillMode fillMode);
member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of PointF), fillMode As FillMode)

Parámetros

brush
Brush
fillMode
FillMode

Se aplica a

FillPolygon(Brush, ReadOnlySpan<Point>, FillMode)

Source:
Graphics.cs
Source:
Graphics.cs
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points, System::Drawing::Drawing2D::FillMode fillMode);
public void FillPolygon (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.Point> points, System.Drawing.Drawing2D.FillMode fillMode);
member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of Point), fillMode As FillMode)

Parámetros

brush
Brush
fillMode
FillMode

Se aplica a

FillPolygon(Brush, PointF[], FillMode)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Rellena el interior de un polígono definido por una matriz de puntos especificados por PointF estructuras mediante el modo de relleno especificado.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillMode);
public void FillPolygon (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillMode);
member this.FillPolygon : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillPolygon (brush As Brush, points As PointF(), fillMode As FillMode)

Parámetros

brush
Brush

Brush que determina las características del relleno.

points
PointF[]

Matriz de PointF estructuras que representan los vértices del polígono que se va a rellenar.

fillMode
FillMode

Miembro de la enumeración FillMode que determina el estilo del relleno.

Excepciones

brush es null.

-o-

points es null.

Ejemplos

El ejemplo de código siguiente está diseñado para su uso con Windows Forms y requiere PaintEventArgse, que es un parámetro del controlador de eventos Paint. El código realiza la siguiente acción:

  • Crea un pincel azul sólido.

  • Crea una matriz de siete puntos para definir un polígono.

  • Establece el modo de relleno en Winding.

  • Rellena el área poligonal en la pantalla.

public:
   void FillPolygonPointFFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Define fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Fill polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints, newFillMode );
   }
public void FillPolygonPointFFillMode(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Define fill mode.
    FillMode newFillMode = FillMode.Winding;

    // Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode);
}
Public Sub FillPolygonPointFFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Define fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode)
End Sub

Comentarios

Cada dos puntos consecutivos de la matriz especifican un lado del polígono. Además, si el último punto y el primer punto no coinciden, especifican el lado de cierre del polígono.

Se aplica a

FillPolygon(Brush, Point[], FillMode)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Rellena el interior de un polígono definido por una matriz de puntos especificados por Point estructuras mediante el modo de relleno especificado.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillMode);
public void FillPolygon (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillMode);
member this.FillPolygon : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillPolygon (brush As Brush, points As Point(), fillMode As FillMode)

Parámetros

brush
Brush

Brush que determina las características del relleno.

points
Point[]

Matriz de Point estructuras que representan los vértices del polígono que se va a rellenar.

fillMode
FillMode

Miembro de la enumeración FillMode que determina el estilo del relleno.

Excepciones

brush es null.

-o-

points es null.

Ejemplos

El ejemplo de código siguiente está diseñado para su uso con Windows Forms y requiere PaintEventArgse, que es un parámetro del controlador de eventos Paint. El código realiza las siguientes acciones:

  • Crea un pincel azul sólido.

  • Crea una matriz de siete puntos para definir un polígono.

  • Establece el modo de relleno en Winding.

  • Rellena el área poligonal en la pantalla.

public:
   void FillPolygonPointFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Define fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Draw polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints, newFillMode );
   }
public void FillPolygonPointFillMode(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    Point point1 = new Point(50, 50);
    Point point2 = new Point(100, 25);
    Point point3 = new Point(200, 5);
    Point point4 = new Point(250, 50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Define fill mode.
    FillMode newFillMode = FillMode.Winding;

    // Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode);
}
Public Sub FillPolygonPointFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Define fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode)
End Sub

Comentarios

Cada dos puntos consecutivos de la matriz especifican un lado del polígono. Además, si el último punto y el primer punto no coinciden, especifican el lado de cierre del polígono.

Se aplica a

FillPolygon(Brush, ReadOnlySpan<Point>)

Source:
Graphics.cs
Source:
Graphics.cs
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points);
public void FillPolygon (System.Drawing.Brush brush, scoped ReadOnlySpan<System.Drawing.Point> points);
member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> -> unit
Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of Point))

Parámetros

brush
Brush

Se aplica a

FillPolygon(Brush, PointF[])

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Rellena el interior de un polígono definido por una matriz de puntos especificados por PointF estructuras.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points);
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::PointF> ^ points);
public void FillPolygon (System.Drawing.Brush brush, System.Drawing.PointF[] points);
public void FillPolygon (System.Drawing.Brush brush, params System.Drawing.PointF[] points);
member this.FillPolygon : System.Drawing.Brush * System.Drawing.PointF[] -> unit
Public Sub FillPolygon (brush As Brush, points As PointF())
Public Sub FillPolygon (brush As Brush, ParamArray points As PointF())

Parámetros

brush
Brush

Brush que determina las características del relleno.

points
PointF[]

Matriz de PointF estructuras que representan los vértices del polígono que se va a rellenar.

Excepciones

brush es null.

-o-

points es null.

Ejemplos

El ejemplo de código siguiente está diseñado para su uso con Windows Forms y requiere PaintEventArgse, que es un parámetro del controlador de eventos Paint. El código realiza las siguientes acciones:

  • Crea un pincel azul sólido.

  • Crea una matriz de siete puntos para definir un polígono.

  • Rellena el área poligonal en la pantalla.

public:
   void FillPolygonPointF( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Fill polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints );
   }
public void FillPolygonPointF(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints);
}
Public Sub FillPolygonPointF(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints)
End Sub

Comentarios

Cada dos puntos consecutivos de la matriz especifican un lado del polígono. Además, si el último punto y el primer punto no coinciden, especifican el lado de cierre del polígono.

Se aplica a

FillPolygon(Brush, Point[])

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Rellena el interior de un polígono definido por una matriz de puntos especificados por Point estructuras.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points);
public void FillPolygon (System.Drawing.Brush brush, System.Drawing.Point[] points);
member this.FillPolygon : System.Drawing.Brush * System.Drawing.Point[] -> unit
Public Sub FillPolygon (brush As Brush, points As Point())

Parámetros

brush
Brush

Brush que determina las características del relleno.

points
Point[]

Matriz de Point estructuras que representan los vértices del polígono que se va a rellenar.

Excepciones

brush es null.

-o-

points es null.

Ejemplos

El ejemplo de código siguiente está diseñado para su uso con Windows Forms y requiere PaintEventArgse, que es un parámetro del controlador de eventos Paint. El código realiza las siguientes acciones:

  • Crea un pincel azul sólido.

  • Crea una matriz de siete puntos para definir un polígono.

  • Rellena el área poligonal en la pantalla.

public:
   void FillPolygonPoint( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints );
   }
public void FillPolygonPoint(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    Point point1 = new Point(50, 50);
    Point point2 = new Point(100, 25);
    Point point3 = new Point(200, 5);
    Point point4 = new Point(250, 50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints);
}
Public Sub FillPolygonPoint(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints)
End Sub

Comentarios

Cada dos puntos consecutivos de la matriz especifican un lado del polígono. Además, si el último punto y el primer punto no coinciden, especifican el lado de cierre del polígono.

Se aplica a

FillPolygon(Brush, ReadOnlySpan<PointF>)

Source:
Graphics.cs
Source:
Graphics.cs
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points);
public void FillPolygon (System.Drawing.Brush brush, scoped ReadOnlySpan<System.Drawing.PointF> points);
member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> -> unit
Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of PointF))

Parámetros

brush
Brush

Se aplica a