Redigeeri

Jagamisviis:

Configure access to Azure Cosmos DB from virtual networks (VNet)

  • Artikkel

APPLIES TO: NoSQL MongoDB Cassandra Gremlin Table

You can configure the Azure Cosmos DB account to allow access only from a specific subnet of a virtual network (VNET). Enable service endpoint on a subnet within a virtual network to control access to Azure Cosmos DB. The traffic from that subnet is sent to Azure Cosmos DB with the identity of the subnet and Virtual Network. Once the Azure Cosmos DB service endpoint is enabled, you can limit access to the subnet by adding it to your Azure Cosmos DB account.

By default, an Azure Cosmos DB account is accessible from any source if the request is accompanied by a valid authorization token. When you add one or more subnets within VNets, only requests originating from those subnets will get a valid response. Requests originating from any other source will receive a 403 (Forbidden) response.

You can configure Azure Cosmos DB accounts to allow access from only a specific subnet of an Azure virtual network. To limit access to an Azure Cosmos DB account with connections from a subnet in a virtual network:

  1. Enable the service endpoint for Azure Cosmos DB to send the subnet and virtual network identity to Azure Cosmos DB.

  2. Add a rule in the Azure Cosmos DB account to specify the subnet as a source from which the account can be accessed.

Note

When a service endpoint for your Azure Cosmos DB account is enabled on a subnet, the source of the traffic that reaches Azure Cosmos DB switches from a public IP to a virtual network and subnet. The traffic switching applies for any Azure Cosmos DB account that's accessed from this subnet. If your Azure Cosmos DB accounts have an IP-based firewall to allow this subnet, requests from the service-enabled subnet no longer match the IP firewall rules, and they're rejected.

To learn more, see the steps outlined in the Migrating from an IP firewall rule to a virtual network access control list section of this article.

The following sections describe how to configure a virtual network service endpoint for an Azure Cosmos DB account.

Configure a service endpoint by using the Azure portal

Configure a service endpoint for an existing Azure virtual network and subnet

  1. From the All resources pane, find the Azure Cosmos DB account that you want to secure.

  2. Select Networking from the settings menu

    Screenshot of the networking menu option.

  3. Choose to allow access from Selected networks.

  4. To grant access to an existing virtual network's subnet, under Virtual networks, select Add existing Azure virtual network.

  5. Select the Subscription from which you want to add an Azure virtual network. Select the Azure Virtual networks and Subnets that you want to provide access to your Azure Cosmos DB account. Next, select Enable to enable selected networks with service endpoints for "Microsoft.AzureCosmosDB". When it's complete, select Add.

    Screenshot of the dialog to select an existing Azure Virtual Network and subnet with an Azure Cosmos DB service endpoint.

    Note

    Configuring a VNET service endpoint may take up to 15 minutes to propagate and the endpoint may exhibit an inconsistent behavior during this period.

  6. After the Azure Cosmos DB account is enabled for access from a virtual network, it will allow traffic from only this chosen subnet. The virtual network and subnet that you added should appear as shown in the following screenshot:

    Screenshot of an Azure Virtual Network and subnet configured successfully in the list.

Note

To enable virtual network service endpoints, you need the following subscription permissions:

  • Subscription with virtual network: Network contributor
  • Subscription with Azure Cosmos DB account: DocumentDB account contributor
  • If your virtual network and Azure Cosmos DB account are in different subscriptions, make sure that the subscription that has virtual network also has Microsoft.DocumentDB resource provider registered. To register a resource provider, see Azure resource providers and types article.

Here are the directions for registering subscription with resource provider.

Configure a service endpoint for a new Azure virtual network and subnet

  1. From the All resources pane, find the Azure Cosmos DB account that you want to secure.

  2. Select Networking from the settings menu, and choose to allow access from Selected networks.

  3. To grant access to a new Azure virtual network, under Virtual networks, select Add new virtual network.

  4. Provide the details required to create a new virtual network, and then select Create. The subnet will be created with a service endpoint for "Microsoft.AzureCosmosDB" enabled.

    Screenshot of the dialog to create a new Azure Virtual Network, configure a subnet, and then enable the Azure Cosmos DB service endpoint.

If your Azure Cosmos DB account is used by other Azure services like Azure AI Search, or is accessed from Stream analytics or Power BI, you allow access by selecting Accept connections from within global Azure datacenters.

To ensure that you have access to Azure Cosmos DB metrics from the portal, you need to enable Allow access from Azure portal options. To learn more about these options, see the Configure an IP firewall article. After you enable access, select Save to save the settings.

Remove a virtual network or subnet

  1. From the All resources pane, find the Azure Cosmos DB account for which you assigned service endpoints.

  2. Select Networking from the settings menu.

  3. To remove a virtual network or subnet rule, select ... next to the virtual network or subnet, and select Remove.

    Screenshot of the menu option to remove an associated Azure Virtual Network.

  4. Select Save to apply your changes.

Configure a service endpoint by using Azure PowerShell

Note

We recommend that you use the Azure Az PowerShell module to interact with Azure. To get started, see Install Azure PowerShell. To learn how to migrate to the Az PowerShell module, see Migrate Azure PowerShell from AzureRM to Az.

Use the following steps to configure a service endpoint to an Azure Cosmos DB account by using Azure PowerShell:

  1. Install Azure PowerShell and sign in.

  2. Enable the service endpoint for an existing subnet of a virtual network.

    $resourceGroupName = "<Resource group name>"
$vnetName = "<Virtual network name>"
$subnetName = "<Subnet name>"
$subnetPrefix = "<Subnet address range>"
$serviceEndpoint = "Microsoft.AzureCosmosDB"

Get-AzVirtualNetwork `
   -ResourceGroupName $resourceGroupName `
   -Name $vnetName | Set-AzVirtualNetworkSubnetConfig `
   -Name $subnetName `
   -AddressPrefix $subnetPrefix `
   -ServiceEndpoint $serviceEndpoint | Set-AzVirtualNetwork

    Note

    When you're using PowerShell or the Azure CLI, be sure to specify the complete list of IP filters and virtual network ACLs in parameters, not just the ones that need to be added.

  3. Get virtual network information.

    $vnet = Get-AzVirtualNetwork `
   -ResourceGroupName $resourceGroupName `
   -Name $vnetName

$subnetId = $vnet.Id + "/subnets/" + $subnetName

  4. Prepare an Azure Cosmos DB Virtual Network Rule

    $vnetRule = New-AzCosmosDBVirtualNetworkRule `
   -Id $subnetId

  5. Update Azure Cosmos DB account properties with the new Virtual Network endpoint configuration:

    $accountName = "<Azure Cosmos DB account name>"

Update-AzCosmosDBAccount `
   -ResourceGroupName $resourceGroupName `
   -Name $accountName `
   -EnableVirtualNetwork $true `
   -VirtualNetworkRuleObject @($vnetRule)

  6. Run the following command to verify that your Azure Cosmos DB account is updated with the virtual network service endpoint that you configured in the previous step:

    $account = Get-AzCosmosDBAccount `
   -ResourceGroupName $resourceGroupName `
   -Name $accountName

$account.IsVirtualNetworkFilterEnabled
$account.VirtualNetworkRules

Configure a service endpoint by using the Azure CLI

Azure Cosmos DB accounts can be configured for service endpoints when they're created or updated at a later time if the subnet is already configured for them. Service endpoints can also be enabled on the Azure Cosmos DB account where the subnet isn't yet configured. Then the service endpoint will begin to work when the subnet is configured later. This flexibility allows for administrators who don't have access to both the Azure Cosmos DB account and virtual network resources to make their configurations independent of each other.

Create a new Azure Cosmos DB account and connect it to a back end subnet for a new virtual network

In this example, the virtual network and subnet are created with service endpoints enabled for both when they're created.

# Create an Azure Cosmos DB Account with a service endpoint connected to a backend subnet

# Resource group and Azure Cosmos DB account variables
resourceGroupName='MyResourceGroup'
location='West US 2'
accountName='mycosmosaccount'

# Variables for a new Virtual Network with two subnets
vnetName='myVnet'
frontEnd='FrontEnd'
backEnd='BackEnd'

# Create a resource group
az group create -n $resourceGroupName -l $location

# Create a virtual network with a front-end subnet
az network vnet create \
   -n $vnetName \
   -g $resourceGroupName \
   --address-prefix 10.0.0.0/16 \
   --subnet-name $frontEnd \
   --subnet-prefix 10.0.1.0/24

# Create a back-end subnet with service endpoints enabled for Azure Cosmos DB
az network vnet subnet create \
   -n $backEnd \
   -g $resourceGroupName \
   --address-prefix 10.0.2.0/24 \
   --vnet-name $vnetName \
   --service-endpoints Microsoft.AzureCosmosDB

svcEndpoint=$(az network vnet subnet show -g $resourceGroupName -n $backEnd --vnet-name $vnetName --query 'id' -o tsv)

# Create an Azure Cosmos DB account with default values and service endpoints
az cosmosdb create \
   -n $accountName \
   -g $resourceGroupName \
   --enable-virtual-network true \
   --virtual-network-rules $svcEndpoint

Connect and configure an Azure Cosmos DB account to a back end subnet independently

This sample is intended to show how to connect an Azure Cosmos DB account to an existing or new virtual network. In this example, the subnet isn't yet configured for service endpoints. Configure the service endpoint by using the --ignore-missing-vnet-service-endpoint parameter. This configuration allows the Azure Cosmos DB account to complete without error before the configuration to the virtual network's subnet is complete. Once the subnet configuration is complete, the Azure Cosmos DB account will then be accessible through the configured subnet.

# Create an Azure Cosmos DB Account with a service endpoint connected to a backend subnet
# that is not yet enabled for service endpoints.

# Resource group and Azure Cosmos DB account variables
resourceGroupName='MyResourceGroup'
location='West US 2'
accountName='mycosmosaccount'

# Variables for a new Virtual Network with two subnets
vnetName='myVnet'
frontEnd='FrontEnd'
backEnd='BackEnd'

# Create a resource group
az group create -n $resourceGroupName -l $location

# Create a virtual network with a front-end subnet
az network vnet create \
   -n $vnetName \
   -g $resourceGroupName \
   --address-prefix 10.0.0.0/16 \
   --subnet-name $frontEnd \
   --subnet-prefix 10.0.1.0/24

# Create a back-end subnet but without configuring service endpoints (--service-endpoints Microsoft.AzureCosmosDB)
az network vnet subnet create \
   -n $backEnd \
   -g $resourceGroupName \
   --address-prefix 10.0.2.0/24 \
   --vnet-name $vnetName

svcEndpoint=$(az network vnet subnet show -g $resourceGroupName -n $backEnd --vnet-name $vnetName --query 'id' -o tsv)

# Create an Azure Cosmos DB account with default values
az cosmosdb create -n $accountName -g $resourceGroupName

# Add the virtual network rule but ignore the missing service endpoint on the subnet
az cosmosdb network-rule add \
   -n $accountName \
   -g $resourceGroupName \
   --virtual-network $vnetName \
   --subnet svcEndpoint \
   --ignore-missing-vnet-service-endpoint true

read -p'Press any key to now configure the subnet for service endpoints'

az network vnet subnet update \
   -n $backEnd \
   -g $resourceGroupName \
   --vnet-name $vnetName \
   --service-endpoints Microsoft.AzureCosmosDB

Port range when using direct mode

When you're using service endpoints with an Azure Cosmos DB account through a direct mode connection, you need to ensure that the TCP port range from 10000 to 20000 is open.

Migrating from an IP firewall rule to a virtual network ACL

To migrate an Azure Cosmos DB account from using IP firewall rules to using virtual network service endpoints, use the following steps.

After an Azure Cosmos DB account is configured for a service endpoint for a subnet, each request from that subnet is sent differently to Azure Cosmos DB. The requests are sent with virtual network and subnet source information instead of a source public IP address. These requests will no longer match an IP filter configured on the Azure Cosmos DB account, which is why the following steps are necessary to avoid downtime.

  1. Get virtual network and subnet information:

    $resourceGroupName = "myResourceGroup"
$accountName = "mycosmosaccount"
$vnetName = "myVnet"
$subnetName = "mySubnet"

$vnet = Get-AzVirtualNetwork `
   -ResourceGroupName $resourceGroupName `
   -Name $vnetName

$subnetId = $vnet.Id + "/subnets/" + $subnetName

  2. Prepare a new Virtual Network rule object for the Azure Cosmos DB account:

    $vnetRule = New-AzCosmosDBVirtualNetworkRule `
   -Id $subnetId

  3. Update the Azure Cosmos DB account to enable service endpoint access from the subnet:

    Update-AzCosmosDBAccount `
   -ResourceGroupName $resourceGroupName `
   -Name $accountName `
   -EnableVirtualNetwork $true `
   -VirtualNetworkRuleObject @($vnetRule)

  4. Repeat the previous steps for all Azure Cosmos DB accounts accessed from the subnet.

  5. Enable the Azure Cosmos DB service endpoint on the virtual network and subnet using the step shown in the Enable the service endpoint for an existing subnet of a virtual network section of this article.

  6. Remove the IP firewall rule for the subnet from the Azure Cosmos DB account's Firewall rules.

Frequently asked questions

Here are some frequently asked questions about configuring access from virtual networks:

Are Notebooks and Mongo/Cassandra Shell currently compatible with Virtual Network enabled accounts?

At the moment the Mongo shell and Cassandra shell integrations in the Azure Cosmos DB Data Explorer aren't supported with VNET access. This integration is currently in active development.

Can I specify both virtual network service endpoint and IP access control policy on an Azure Cosmos DB account?

You can enable both the virtual network service endpoint and an IP access control policy (also known as firewall) on your Azure Cosmos DB account. These two features are complementary and collectively ensure isolation and security of your Azure Cosmos DB account. Using IP firewall ensures that static IPs can access your account.

How do I limit access to subnet within a virtual network?

There are two steps required to limit access to Azure Cosmos DB account from a subnet. First, you allow traffic from subnet to carry its subnet and virtual network identity to Azure Cosmos DB. Changing the identity of the traffic is done by enabling service endpoint for Azure Cosmos DB on the subnet. Next is adding a rule in the Azure Cosmos DB account specifying this subnet as a source from which account can be accessed.

Will virtual network ACLs and IP Firewall reject requests or connections?

When IP firewall or virtual network access rules are added, only requests from allowed sources get valid responses. Other requests are rejected with a 403 (Forbidden). It's important to distinguish Azure Cosmos DB account's firewall from a connection level firewall. The source can still connect to the service and the connections themselves aren't rejected.

My requests started getting blocked when I enabled service endpoint to Azure Cosmos DB on the subnet. What happened?

Once service endpoint for Azure Cosmos DB is enabled on a subnet, the source of the traffic reaching the account switches from public IP to virtual network and subnet. If your Azure Cosmos DB account has IP-based firewall only, traffic from service enabled subnet would no longer match the IP firewall rules, and therefore be rejected. Go over the steps to seamlessly migrate from IP-based firewall to virtual network-based access control.

Are extra Azure role-based access control permissions needed for Azure Cosmos DB accounts with VNET service endpoints?

After you add the VNet service endpoints to an Azure Cosmos DB account, to make any changes to the account settings, you need access to the Microsoft.Network/virtualNetworks/subnets/joinViaServiceEndpoint/action action for all the VNETs configured on your Azure Cosmos DB account. This permission is required because the authorization process validates access to resources (such as database and virtual network resources) before evaluating any properties.

The authorization validates permission for VNet resource action even if the user doesn't specify the VNET ACLs using Azure CLI. Currently, the Azure Cosmos DB account's control plane supports setting the complete state of the Azure Cosmos DB account. One of the parameters to the control plane calls is virtualNetworkRules. If this parameter isn't specified, the Azure CLI makes a get database call to retrieve the virtualNetworkRules and uses this value in the update call.

Do the peered virtual networks also have access to Azure Cosmos DB account?

Only virtual network and their subnets added to Azure Cosmos DB account have access. Their peered VNets can't access the account until the subnets within peered virtual networks are added to the account.

What is the maximum number of subnets allowed to access a single Azure Cosmos DB account?

Currently, you can have at most 256 subnets allowed for an Azure Cosmos DB account.

Can I enable access from VPN and Express Route?

For accessing Azure Cosmos DB account over Express route from on premises, you would need to enable Microsoft peering. Once you put IP firewall or virtual network access rules, you can add the public IP addresses used for Microsoft peering on your Azure Cosmos DB account IP firewall to allow on premises services access to Azure Cosmos DB account.

Do I need to update the Network Security Groups (NSG) rules?

NSG rules are used to limit connectivity to and from a subnet with virtual network. When you add service endpoint for Azure Cosmos DB to the subnet, there's no need to open outbound connectivity in NSG for your Azure Cosmos DB account.

Are service endpoints available for all VNets?

No, Only Azure Resource Manager virtual networks can have service endpoint enabled. Classic virtual networks don't support service endpoints.

When should I accept connections from within global Azure datacenters for an Azure Cosmos DB account?

This setting should only be enabled when you want your Azure Cosmos DB account to be accessible to any Azure service in any Azure region. Other Azure first party services such as Azure Data Factory and Azure AI Search provide documentation for how to secure access to data sources including Azure Cosmos DB accounts, for example:

Next steps

  • To configure a firewall for Azure Cosmos DB, see the Firewall support article.