Managed HSM disaster recovery
You may wish to create an exact replica of your HSM if the original is lost or unavailable due to any of these reasons:
- It was deleted and then purged.
- A catastrophic failure in the region resulted in all member partitions being destroyed.
You can re-create the HSM instance in the same or a different region if you have:
- The Security Domain of the source HSM.
- The private keys (at least quorum number) that encrypt the security domain.
- The most recent full HSM backup from the source HSM.
Here are the steps of the disaster recovery procedure:
- Create a new HSM Instance.
- Activate "Security Domain recovery". A new RSA key pair (Security Domain Exchange Key) will be generated for Security Domain transfer and sent in response, which will be downloaded as a SecurityDomainExchangeKey (public key).
- Create and then upload the "Security Domain Transfer File". You'll need the private keys that encrypt the security domain. The private keys are used locally, and never transferred anywhere in this process.
- Take a backup of the new HSM. A backup is required before any restore, even when the HSM is empty. Backups allow for easy roll-back.
- Restore the recent HSM backup from the source HSM.
These steps will enable you to manually replicate contents of the HSM to another region. The HSM name (and the service endpoint URI) will be different, so you will have to change your application configuration to make use of these keys from a different location.
Create a new Managed HSM
Use the az keyvault create
command to create a Managed HSM. This script has three mandatory parameters: a resource group name, an HSM name, and the geographic location.
You must provide the following inputs to create a Managed HSM resource:
- The name for the HSM.
- The resource group where it will be placed in your subscription.
- The Azure location.
- A list of initial administrators.
The following example creates an HSM named ContosoMHSM2, in the resource group ContosoResourceGroup, residing in the West US 3 location, with the current signed in user as the only administrator.
oid=$(az ad signed-in-user show --query objectId -o tsv)
az keyvault create --hsm-name "ContosoMHSM2" --resource-group "ContosoResourceGroup" --location "westus3" --administrators $oid
Note
The create command can take a few minutes. Once it returns successfully, you are ready to activate your HSM.
Warning
Managed HSM instances are considered always-in-use. If you choose to enable purge protection using the --enable-purge-protection
flag, you will be billed for the entirety of the retention period.
The output of this command shows properties of the Managed HSM that you've created. The two most important properties are:
- name: In the example, the name is ContosoMHSM. You'll use this name for other Key Vault commands.
- hsmUri: In the example, the URI is 'https://contosomhsm2.managedhsm.azure.net.' Applications that use your HSM through its REST API must use this URI.
Your Azure account is now authorized to perform any operations on this Managed HSM. As of yet, nobody else is authorized.
Activate the Security Domain recovery mode
At this point in the normal creation process, we initialize and download the new HSM's Security Domain. However, since we're executing a disaster recovery procedure, we request the HSM to enter Security Domain Recovery Mode and download a Security Domain Exchange Key instead. The Security Domain Exchange Key is an RSA public key that will be used to encrypt the security domain before uploading it to the HSM. The corresponding private key is protected inside the HSM, to keep your Security Domain contents safe during the transfer.
az keyvault security-domain init-recovery --hsm-name ContosoMHSM2 --sd-exchange-key ContosoMHSM2-SDE.cer
Create a Security Domain Upload blob of the source HSM
For this step you'll need:
- The Security Domain Exchange Key you downloaded in previous step.
- The Security Domain of the source HSM.
- At least quorum number of private keys that were used to encrypt the security domain.
The az keyvault security-domain restore-blob
command performs following operations:
- Decrypt the source HSM's Security Domain with the private keys you supply.
- Create a Security Domain Upload blob encrypted with the Security Domain Exchange Key we downloaded in the previous step
This step can be performed offline.
In the following example, we use the Security Domain from the ContosoMHSM, the 3 of the corresponding private keys, and the Security Domain Exchange Key to create and download an encrypted blob which we will use to upload to ContosoMHSM2, which is waiting to receive a Security Domain.
az keyvault security-domain restore-blob --sd-exchange-key ContosoMHSM2-SDE.cer --sd-file ContosoMHSM-SD.json --sd-wrapping-keys cert_0.key cert_1.key cert_2.key --sd-file-restore-blob restore_blob.json
Upload Security Domain Upload blob to destination HSM
We now use the Security Domain Upload blob created in the previous step and upload it to the destination HSM to complete the security domain recovery. The --restore-blob
flag is used to prevent exposing keys in an online environment.
az keyvault security-domain upload --hsm-name ContosoMHSM2 --sd-file restore_blob.json --restore-blob
Now both the source HSM (ContosoMHSM) and the destination HSM (ContosoMHSM2) have the same security domain. We can now restore a full backup from the source HSM into the destination HSM.
Backup and restore
It's always a good idea to take a full backup before you execute a full HSM restore, so that you have a restore point in case something goes wrong with the restore. You can do this using one of two methods: user assigned managed identity, or SAS tokens.
Create a backup (as a restore point) of your new HSM
To create an HSM backup, you'll need:
- A storage account where the backup will be stored
- A blob storage container in this storage account where the backup process will create a new folder to store encrypted backup
- A user assigned managed identity that has the Storage Blob Data Contributor role on the storage account OR storage container SAS token with permissions 'crdw'
We use az keyvault backup command to the HSM backup in the storage container mhsmbackupcontainer, which is in the storage account mhsmdemobackup in the following examples.
If using the user assigned managed identity method, we specify the user assigned managed identity with the --mi-user-assigned
parameter and associate that to the Managed HSM before writing the backup in the below example.
az keyvault update-hsm --hsm-name ContosoMHSM2 --mi-user-assigned "/subscriptions/subid/resourcegroups/mhsmrgname/providers/Microsoft.ManagedIdentity/userAssignedIdentities/userassignedidentityname"
az keyvault backup start --use-managed-identity true --hsm-name ContosoMHSM2 --storage-account-name mhsmdemobackup --blob-container-name mhsmbackupcontainer
Restore backup from source HSM
For this step you need:
- The storage account and the blob container in which the source HSM's backups are stored.
- The folder name from where you want to restore the backup. If you create regular backups, there will be many folders inside this container.
We use az keyvault restore command to the new HSM ContosoMHSM2, using the backup of the source MHSM we are trying to restore, which is in the folder name mhsm-ContosoMHSM-2020083120161860 found in the storage container mhsmdemobackupcontainer of the storage account ContosoBackup in the following example.
If using the user assigned managed identity method, we set the --use-managed-identity
pramater to "true".
az keyvault restore start --hsm-name ContosoMHSM2 --storage-account-name ContosoBackup --blob-container-name mhsmdemobackupcontainer --backup-folder mhsm-ContosoMHSM-2020083120161860 --use-managed-identity true
Now you've completed a full disaster recovery process. The contents of the source HSM when the backup was taken are copied to the destination HSM, including all the keys, versions, attributes, tags, and role assignments.
Next steps
- Learn more about Security Domain see About Managed HSM Security Domain
- Follow Managed HSM best practices
Tagasiside
https://aka.ms/ContentUserFeedback.
Varsti tulekul: 2024. aasta jooksul tühistame GitHubi probleemide funktsiooni sisutagasiside mehhanismina ja asendame selle uue tagasisidesüsteemiga. Lisateabe saamiseks vtEsita ja vaata tagasisidet