Jaa


Manage permissions for recipients in Exchange 2013

Applies to: Exchange Server 2013

You can use the EAC or the Shell to assign permissions to users or groups (called delegates) that allow them to open or send messages from other mailboxes. Permissions can be assigned to user mailboxes, linked mailboxes, resource mailboxes, and shared mailboxes. You can also assign permissions to distribution groups, dynamic distribution groups, and mail-enabled security groups to allow delegates to send messages on behalf of the group. You can assign delegates the following permissions to access mailboxes or send messages on behalf of mailboxes or groups:

  • Full Access: This permission allows a delegate to open a user's mailbox and access the contents of the mailbox. However, assigning the Full Access permission doesn't allow the delegate to send mail from the mailbox. You have to assign the delegate the Send As or the Send on Behalf permission to send mail.

    The Full Access permission isn't available when configuring permissions for groups.

  • Send As: This permission allows delegates to use the mailbox to send messages. After this permission is assigned to a delegate, any message that the delegate sends from the mailbox will appear to have been sent by the mailbox owner. However, this permission doesn't allow a delegate to sign in to the user's mailbox. It only allows users to open the mailbox. If this permission is assigned to a group, a message sent by the delegate will appear to have been sent by the group.

  • Send on Behalf: This permission also allows a delegate to use the mailbox to send messages. After this permission is assigned to a delegate, the From address in any message sent by the delegate indicates that the message was sent by the delegate on behalf of the mailbox owner.

Note

If you assign the Full Access, Send As, or Send on Behalf permission to access a mailbox that is hidden from address lists, the delegate won't be able to open the mailbox or send messages.

What do you need to know before you begin?

  • Estimated time to complete each procedure: 2 minutes.

  • If permissions to access a mailbox are granted to a user through a group, the mailbox won't be automatically added to the user's profile. The user will need to manually add the mailbox to the profile manually.

  • When a mailbox is added to Outlook using Advanced Settings, only the primary mailbox will be added; the archive mailbox won't be added. If a user needs to also access the archive mailbox, the mailbox should be added to Outlook as a second account in the same Outlook profile.

  • Procedures in this topic require specific permissions. See each procedure for its permissions information.

  • For information about keyboard shortcuts that may apply to the procedures in this topic, see Keyboard shortcuts for the Exchange admin center in Exchange 2013.

Tip

Having problems? Ask for help in the Exchange forums. Visit the forums at Exchange Server.

Assign permissions to a mailbox

As previously stated, you can assign delegates permissions to user mailboxes, linked mailboxes, resource mailboxes, and shared mailboxes. You can also use the Shell to assign delegates permissions to access a discovery mailbox.

You need to be assigned permissions before you can perform this procedure or procedures. To see what permissions you need, see the "Permissions and delegation" entry in the "Recipient Provisioning Permissions" section in the Recipients Permissions topic.

Use the EAC to assign permissions

The following procedure shows how to assign permissions to a user mailbox. You follow a similar procedure to assign permissions to resource or shared mailboxes by navigating to the Resources or Shared page in the EAC and selecting the mailbox to assign the permissions to.

  1. In the EAC, navigate to Recipients > Mailboxes.

  2. In the list of mailboxes, click the mailbox that you want to assign permissions for, and then click Edit Edit icon..

  3. On the mailbox properties page, click Mailbox Delegation.

  4. To assign permissions to delegates, click Add Add Icon. under the appropriate permission to display a page that lists all recipients in your Exchange organization that can be assigned the permission. Select the recipients you want, add them to the list, and then click OK. You can also search for a specific recipient by typing the recipient's name in the search box and then clicking Search Search icon.

    To remove a permission for a recipient, under the appropriate permission, select the recipient and then click Remove Remove icon..

  5. Click Save to save your changes.

Use the EAC to bulk assign permissions

Use the following steps to bulk assign permissions.

  1. In the EAC, navigate to Recipients > Mailboxes.

  2. Select the mailboxes that you wish to assign permissions to.

  3. Click or tap More options in the right pane, and under Mailbox Delegation choose, Add.

  4. On the bulk add delegation page, click or tap Add Add Icon. under the appropriate permission to display a page that lists all recipients in your Exchange organization that can be assigned the permission. Select the recipients you want, add them to the list, and then click OK.

    To remove a permission for recipients, under the appropriate permission, select the recipients and then click Remove Remove icon..

Use the EAC to assign a user permission to send email from another user's mailbox

The following procedure shows how to assign a user permission to send email from another user's mailbox.

  1. In the EAC, navigate to Recipients > Mailboxes.

  2. In the list of mailboxes, click the mailbox that you want to assign send as permissions for, and then click Edit Edit icon..

  3. On the mailbox properties page, click Mailbox Delegation.

  4. To assign permissions to delegates, click Add Add Icon. under Send As or Send on Behalf to display a page that lists all recipients in your Exchange organization that can be assigned the permission. Select the recipients you want, add them to the list, and then click OK. You can also search for a specific recipient by typing the recipient's name in the search box and then clicking Search Search icon.

    The Send As permission allows the delegate to send email from this mailbox.

    The Send on Behalf permission allows the delegate to send email on behalf of this mailbox. The From line in any message sent by a delegate indicates that the message was sent by the delegate on behalf of the mailbox owner.

    Note

    If the user also needs to be able to open and view the content of that mailbox, you must also assign the user the Full Access permission.

  5. Click Save to save your changes.

Use the EAC to assign a user permission to send email from a group

The following procedure shows how to assign a user permission to send email from a group.

  1. In the EAC, navigate to Recipients > Groups.

  2. In the list of groups, click the group that you want to assign send as permissions for, and then click Edit Edit icon..

  3. On the group properties page, click Group Delegation.

  4. To assign permissions to delegates, click Add Add Icon. under Send As or Send on Behalf to display a page that lists all recipients in your Exchange organization that can be assigned the permission. Select the recipients you want, add them to the list, and then click OK. You can also search for a specific recipient by typing the recipient's name in the search box and then clicking Search Search icon.

    The Send As permission allows the delegate to send email from this group.

    The Send on Behalf permission allows the delegate to send email on behalf of this group. The From line in any message sent by a delegate indicates that the message was sent by the delegate on behalf of the group.

  5. Click Save to save your changes.

Use the EAC to assign full access permissions

The following procedure shows how to assign full access permissions to a user mailbox.

  1. In the EAC, navigate to Recipients > Mailboxes.

  2. In the list of mailboxes, click the mailbox that you want to assign full access permissions for, and then click Edit Edit icon..

  3. On the mailbox properties page, click Mailbox Delegation.

  4. To assign permissions to delegates, click Add Add Icon. under Full Access to display a page that lists all recipients in your Exchange organization that can be assigned the permission. Select the recipients you want, add them to the list, and then click OK. You can also search for a specific recipient by typing the recipient's name in the search box and then clicking Search Search icon.

    The Full Access permission allows a delegate to open a user's mailbox and access the contents of the mailbox.

    Note

    Assigning the Full Access permission doesn't allow the delegate to send mail from the mailbox. You have to assign the delegate the Send As or the Send on Behalf permission to send mail.

  5. Click Save to save your changes.

Use the Shell to assign permissions to mailboxes

The following sections show how to use the Shell to manage Full Access, Send As, and Send on Behalf permissions for mailboxes.

Manage the Full Access permission for mailboxes

The following examples show how to use the Add-MailboxPermission and Remove-MailboxPermission cmdlets to manage Full Access permissions.

This example assigns the delegate Raymond Sam the Full Access permission to the mailbox of Terry Adams.

Add-MailboxPermission -Identity "Terry Adams" -User raymonds -AccessRights FullAccess -InheritanceType all

This example assigns Esther Valle the Full Access permission to the organization's default discovery search mailbox.

Add-MailboxPermission -Identity "DiscoverySearchMailbox{D919BA05-46A6-415f-80AD-7E09334BB852}" -User estherv -AccessRights FullAccess -InheritanceType all

This example assigns members of the Helpdesk distribution group the Full Access permission to the Helpdesk Tickets shared mailbox.

Add-MailboxPermission "HelpdeskTickets" -User helpdesk -AccessRights FullAccess -InheritanceType all

This example removes Jim Hance's Full Access permission to Ayla Kol's mailbox.

Remove-MailboxPermission -Identity ayla -User "Jim Hance" -AccessRights FullAccess -Inheritance

For detailed syntax and parameter information, see the following topics:

Manage the Send As permission for mailboxes

The following examples show how to manage Send As permissions in Exchange Server 2013. In Exchange 2013, you use the Add-ADPermission and Remove-ADPermission cmdlets. The Identity parameter specifies the name of the mailbox on which the Send As permission should be added or removed and the User parameter specifies the delegate (for example, a user or group) that will be assigned or unassigned the Send As permission.

Tip

Use the Get-Recipient cmdlet to retrieve the Name property for the mailbox and the delegate. Use these values to assign the Send As permission.

This example assigns the Send As permission to the Helpdesk group on the shared mailbox Helpdesk Support Team.

Add-ADPermission -Identity helpdesksupport -User helpdeskgroup -ExtendedRights "Send As"

This example removes the Send As permission for the user Pilar Pinilla on the mailbox of James Alvord.

Remove-ADPermission -Identity "James Alvord" -User pilarp -ExtendedRights "Send As"

For detailed syntax and parameter information, see:

Manage the Send on Behalf permission for mailboxes

The following examples show how to use the Set-Mailbox cmdlet to manage Send on Behalf permissions.

This example assigns the delegate Holly Holt the Send on Behalf permission to the mailbox of Sean Chai.

Set-Mailbox -Identity seanc@contoso.com -GrantSendOnBehalfTo hollyh

This example removes the Send on Behalf permission on the Contoso Executives shared mailbox that was assigned to the Temporary Executive Assistants group.

Set-Mailbox "Contoso Executives" -GrantSendOnBehalfTo @{remove="tempassistants@contoso.com"}

For detailed syntax and parameter information, see Set-Mailbox.

How do you know this worked?

To verify that you've successfully assigned permissions to a mailbox or a shared mailbox, do one of the following:

  • In the EAC:
  1. Navigate to Recipients > Mailbox or Shared, click the mailbox, and then click Edit Edit icon..

  2. On the mailbox properties page, click Mailbox Delegation.

  3. If you assigned permissions to a recipient, verify that the user or group is listed under the appropriate permission. If you removed permissions, verify that the recipient isn't listed under the appropriate permission.

Or

  • In the Shell, run one of the following commands, depending on the permission you managed.

    • Full Access
    Get-MailboxPermission -Identity <mailbox>
    

    To verify whether a specific delegate is assigned the Full Access permission to a mailbox, run the following command.

    Get-MailboxPermission -Identity <mailbox> -User <delegate>
    
    • Send As
    Get-ADPermission -Identity <name of mailbox> -User <delegate>
    
    • Send on Behalf
    Get-Mailbox -Identity <mailbox> | Format-List GrantSendOnBehalfTo
    

Assign permissions to a group

As previously stated, you can assign the Send As and Send on Behalf permissions to distribution groups, dynamic distribution groups, and mail-enabled security groups to allow delegates to send messages as the group or on behalf of the group.

You need to be assigned permissions before you can perform this procedure or procedures. To see what permissions you need, see the "Distribution groups" and "Dynamic distribution groups" entries in the "Recipient Provisioning Permissions" section in the Recipients Permissions topic.

Use the EAC to assign permissions to groups

  1. In the EAC, navigate to Recipients > Groups.

  2. In the list of groups, click the group that you want to assign permissions for, and then click Edit Edit icon..

  3. On the group properties page, click Group Delegation.

  4. To assign permissions to delegates, click Add Add Icon. under the appropriate permission to display a page that displays a list of all recipients in your Exchange organization that can be assigned the permission. Select the recipients you want, add them to the list, and then click OK. You can also search for a specific recipient by typing the recipient's name in the search box and then clicking Search Search icon.

    To remove permission for a recipient, under the appropriate permission, select the recipient and then click Remove Remove icon..

  5. Click Save to save your changes.

Use the Shell to assign permissions to groups

The following sections show how to use the Shell to manage Send As and Send on Behalf permissions for groups.

Manage the Send As permission for groups

The following examples show how to manage Send As permissions for groups in Exchange Server 2013. In Exchange 2013, you use the Add-ADPermission and Remove-ADPermission cmdlets. The Identity parameter specifies the name of the group on which the Send As permission should be added or removed and the User or Trustee parameter specifies the delegate (for example, a user or group) that will be assigned or unassigned the Send As permission.

Tip

Use the Get-Recipient cmdlet to retrieve the Name property for the group and the delegate. Use these values to assign the Send As permission.

This example assigns the Send As permission to the Sales Admins group for the group named Contoso Sales Info. This allows members of the sales admin group to send messages as the Contoso Sales Information group.

Add-ADPermission -Identity "Contoso Sales Info" -User "Sales Admins" -ExtendedRights "Send As"

This example removes the Send As permission for the user Alan Shen on the group Corporate IT Admins.

Remove-ADPermission -Identity "Corporate IT Admins" -User contoso\alans -ExtendedRights "Send As"

For detailed syntax and parameter information, see:

Manage the Send on Behalf permission

The following examples show how to use the Set-DistributionGroup and Set-DynamicDistributionGroup cmdlets to manage Send on Behalf permissions for groups.

This example assigns the delegate Sara Davis the Send on Behalf permission to the Printer Support distribution group.

Set-DistributionGroup -Identity printersupport@contoso.com -GrantSendOnBehalfTo sarad

This example assigns the delegate Administrator the Send on Behalf permission to the All Employees dynamic distribution group.

Set-DynamicDistributionGroup -Identity "All Employees" -GrantSendOnBehalfTo administrator

This example removes the Send on Behalf permission on the All Employees dynamic distribution group that was assigned to the administrator.

Set-DynamicDistributionGroup "All Employees" -GrantSendOnBehalfTo @{remove="administrator"}

For detailed syntax and parameter information, see:

How do you know this worked?

To verify that you've successfully assigned permissions to a group, do one of the following:

  • In the EAC:
  1. Navigate to Recipients > Groups, click the group, and then click Edit Edit icon..

  2. On the group properties page, click Group Delegation.

  3. If you assigned permissions to a recipient, verify that the user or group is listed under the appropriate permission. If you removed permissions, verify that the recipient isn't listed under the appropriate permission.

Or

  • In the Shell, run one of the following commands depending on the permission you managed.

    • Send As
    Get-ADPermission -Identity <name of group> -User <delegate>
    
    • Send on Behalf
    Get-DistributionGroup -Identity <group> | Format-List GrantSendOnBehalfTo
    

    Or

    Get-DynamicDistributionGroup -Identity <group> | Format-List GrantSendOnBehalfTo