Muokkaa

Jaa


HPE ProLiant DL20 Gen10

This article describes the HPE ProLiant DL20 Gen10 appliance for OT sensors in an enterprise deployment.

Note

Legacy appliances are certified but aren't currently offered as pre-configured appliances.

Appliance characteristic Details
Hardware profile E1800
Performance Max bandwidth: 1 Gbps
Max devices: 10,000
Physical specifications Mounting: 1U
Ports: 8x RJ45 or 6x SFP (OPT)
Status Supported, not available pre-configured

The following image shows a sample of the HPE ProLiant DL20 front panel:

Photo of the HPE ProLiant DL20 front panel.

The following image shows a sample of the HPE ProLiant DL20 back panel:

Photo of the back panel of the HPE ProLiant DL20.

Specifications

Component Specifications
Chassis 1U rack server
Dimensions Four 3.5" chassis: 4.29 x 43.46 x 38.22 cm / 1.70 x 17.11 x 15.05 in
Weight Max 7.9 kg / 17.41 lb

DL20 Gen10 - Bill of materials

Quantity PN Description: high end
1 P06963-B21 HPE DL20 Gen10 4SFF CTO Server
1 P17104-L21 HPE DL20 Gen10 E-2234 FIO Kit
2 879507-B21 HPE 16-GB 2Rx8 PC4-2666V-E STND Kit
3 655710-B21 HPE 1-TB SATA 7.2 K SFF SC DS HDD
1 P06667-B21 HPE DL20 Gen10 x8x16 FLOM Riser Kit
1 665240-B21 HPE Ethernet 1-Gb 4-port 366FLR Adapter
1 782961-B21 HPE 12-W Smart Storage Battery
1 869081-B21 HPE Smart Array P408i-a SR G10 LH Controller
2 865408-B21 HPE 500-W FS Plat Hot Plug LH Power Supply Kit
1 512485-B21 HPE iLO Adv 1-Server License 1 Year Support
1 P06722-B21 HPE DL20 Gen10 RPS Enablement FIO Kit
1 775612-B21 HPE 1U Short Friction Rail Kit

Port expansion

Optional modules for port expansion include:

Location Type Specifications
PCI Slot 1 (Low profile) Quad Port Ethernet NIC 811546-B21 - HPE 1 GbE 4p BASE-T I350 Adapter SI
PCI Slot 1 (Low profile) DP F/O NIC 727054-B21 - HPE 10 GbE 2p FLR-SFP+ X710 Adapter
PCI Slot 2 (High profile) Quad Port Ethernet NIC 811546-B21 - HPE 1 GbE 4p BASE-T I350 Adapter SI
PCI Slot 2 (High profile) DP F/O NIC 727054-B21 - HPE 10 GbE 2p FLR-SFP+ X710 Adapter
PCI Slot 2 (High profile) Quad Port F/O NIC 869585-B21 - HPE 10 GbE 4p SFP+ X710 Adapter SI
SFPs for Fiber Optic NICs MultiMode, Short Range 455883-B21 - HPE BLc 10G SFP+ SR Transceiver
SFPs for Fiber Optic NICs SingleMode, Long Range 455886-B21 - HPE BLc 10G SFP+ LR Transceiver

HPE ProLiant DL20 Gen10 installation

This section describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen10 appliance.

Installation includes:

  • Enabling remote access and updating the default administrator password
  • Configuring iLO port on network port 1
  • Configuring BIOS and RAID settings
  • Installing Defender for IoT software

Note

Installation procedures are only relevant if you need to re-install software on a pre-configured device, or if you buy your own hardware and configure the appliance yourself.

Enable remote access and update the password

Use the following procedure to set up network options and update the default password.

To enable, and update the password:

  1. Connect a screen and a keyboard to the HPE appliance, turn on the appliance, and press F9.

    Screenshot that shows the HPE ProLiant window.

  2. Go to System Utilities > System Configuration > iLO 5 Configuration Utility > Network Options.

    Screenshot that shows the System Configuration window.

    1. Select Shared Network Port-LOM from the Network Interface Adapter field.

    2. Set Enable DHCP to Off.

    3. Enter the IP address, subnet mask, and gateway IP address.

  3. Select F10: Save.

  4. Select Esc to get back to the iLO 5 Configuration Utility, and then select User Management.

  5. Select Edit/Remove User. The administrator is the only default user defined.

  6. Change the default password and select F10: Save.

Configure the HPE BIOS

This procedure describes how to update the HPE BIOS configuration for your OT deployment.

To configure the HPE BIOS:

  1. Select System Utilities > System Configuration > BIOS/Platform Configuration (RBSU).

  2. In the BIOS/Platform Configuration (RBSU) form, select Boot Options.

  3. Change Boot Mode to Legacy BIOS Mode, and then select F10: Save.

  4. Select Esc twice to close the System Configuration form.

  5. Select Embedded RAID 1: HPE Smart Array P408i-a SR Gen 10 > Array Configuration > Create Array.

  6. In the Create Array form, select all four disk options, and on the next page select RAID10.

Note

For Data-at-Rest encryption, see the HPE guidance for activating RAID Secure Encryption or using Self-Encrypting-Drives (SED).

Install Defender for IoT software on the HPE ProLiant DL20 Gen10

This procedure describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen10

The installation process takes about 20 minutes. After the installation, the system is restarted several times.

To install Defender for IoT software:

  1. Connect the screen and keyboard to the appliance, and then connect to the CLI.

  2. Connect an external CD or disk-on-key that contains the software you downloaded from the Azure portal.

  3. Start the appliance.

  4. Continue with the generic procedure for installing Defender for IoT software. For more information, see Defender for IoT software installation.

Next steps

Continue understanding system requirements for physical or virtual appliances. For more information, see Which appliances do I need?.

Then, use any of the following procedures to continue: