Muokkaa

Jaa


Azure Policy definitions modify effect

The modify effect is used to add, update, or remove properties or tags on a subscription or resource during creation or update. Existing non-compliant resources can also be remediated with a remediation task. Policy assignments with effect set as Modify require a managed identity to do remediation. A common example using modify effect is updating tags on resources such as 'costCenter'.

There are some nuances in modification behavior for resource properties. Learn more about scenarios when modification is skipped.

A single modify rule can have any number of operations. Supported operations are:

  • Add, replace, or remove resource tags. Only tags can be removed. For tags, a Modify policy should have mode set to indexed unless the target resource is a resource group.
  • Add or replace the value of managed identity type (identity.type) of virtual machines and Virtual Machine Scale Sets. You can only modify the identity.type for virtual machines or Virtual Machine Scale Sets.
  • Add or replace the values of certain aliases.
    • Use Get-AzPolicyAlias | Select-Object -ExpandProperty 'Aliases' | Where-Object { $_.DefaultMetadata.Attributes -eq 'Modifiable' } in Azure PowerShell 4.6.0 or higher to get a list of aliases that can be used with modify.

Important

If you're managing tags, it's recommended to use Modify instead of Append as Modify provides more operation types and the ability to remediate existing resources. However, Append is recommended if you aren't able to create a managed identity or Modify doesn't yet support the alias for the resource property.

Modify evaluation

Modify evaluates before the request gets processed by a Resource Provider during the creation or updating of a resource. The modify operations are applied to the request content when the if condition of the policy rule is met. Each modify operation can specify a condition that determines when it's applied.

When an alias is specified, more checks are performed to ensure that the modify operation doesn't change the request content in a way that causes the resource provider to reject it:

  • The property the alias maps to is marked as Modifiable in the request's API version.
  • The token type in the modify operation matches the expected token type for the property in the request's API version.

If either of these checks fail, the policy evaluation falls back to the specified conflictEffect.

Important

It's recommended that Modify definitions that include aliases use the audit conflict effect to avoid failing requests using API versions where the mapped property isn't 'Modifiable'. If the same alias behaves differently between API versions, conditional modify operations can be used to determine the modify operation used for each API version.

Skipped modification

There are some cases when modify operations are skipped during evaluation:

  • Existing resources: When a policy definition using the modify effect is run as part of an evaluation cycle, it doesn't make changes to resources that already exist. Instead, it marks any resource that meets the if condition as non-compliant, so they can be remediated through a remediation task.
  • Not applicable: When the condition of an operation in the operations array is evaluated to false, that particular operation is skipped.
  • Property not modifiable: If an alias specified for an operation isn't modifiable in the request's API version, then evaluation uses the conflict effect. If the conflict effect is set to deny, the request is blocked. If the conflict effect is set to audit, the request is allowed through but the modify operation is skipped.
  • Property not present: If a property is not present in the resource payload of the request, then the modification may be skipped. In some cases, modifiable properties are nested within other properties and have an alias like Microsoft.Storage/storageAccounts/blobServices/deleteRetentionPolicy.enabled. If the "parent" property, in this case deleteRetentionPolicy, isn't present in the request, modification is skipped because that property is assumed to be omitted intentionally. For a practical example, go to section Example of property not present.
  • Non VM or VMSS identity operation: When a modify operation attempts to add or replace the identity.type field on a resource other than a Virtual Machine or Virtual Machine Scale Set, policy evaluation is skipped altogether so the modification isn't performed. In this case, the resource is considered not applicable to the policy.

Example of property not present

Modification of resource properties depends on the API request and the updated resource payload. The payload can depend on client used, such as Azure portal, and other factors like resource provider.

Imagine you apply a policy that modifies tags on a virtual machine (VM). Every time the VM is updated, such as during resizing or disk changes, the tags are updated accordingly regardless of the contents of the VM payload. This is because tags are independent of the VM properties.

However, if you apply a policy that modifies properties on a VM, modification is dependent on the resource payload. If you attempt to modify properties that are not included in the update payload, the modification will not take place. For instance, this can happen when patching the assessmentMode property of a VM (alias Microsoft.Compute/virtualMachines/osProfile.windowsConfiguration.patchSettings.assessmentMode). The property is "nested", so if its parent properties are not included in the request, this omission is assumed to be intentional and modification is skipped. For modification to take place, the resource payload should contain this context.

Modify properties

The details property of the modify effect has all the subproperties that define the permissions needed for remediation and the operations used to add, update, or remove tag values.

  • roleDefinitionIds (required)
  • conflictEffect (optional)
    • Determines which policy definition "wins" if more than one policy definition modifies the same property or when the modify operation doesn't work on the specified alias.
      • For new or updated resources, the policy definition with deny takes precedence. Policy definitions with audit skip all operations. If more than one policy definition has the effect deny, the request is denied as a conflict. If all policy definitions have audit, then none of the operations of the conflicting policy definitions are processed.
      • For existing resources, if more than one policy definition has the effect deny, the compliance status is Conflict. If one or fewer policy definitions have the effect deny, each assignment returns a compliance status of Non-compliant.
    • Available values: audit, deny, disabled.
    • Default value is deny.
  • operations (required)
    • An array of all tag operations to be completed on matching resources.
    • Properties:
      • operation (required)
        • Defines what action to take on a matching resource. Options are: addOrReplace, Add, and Remove.
        • Add behaves similar to the append effect.
        • Remove is only supported for resource tags.
      • field (required)
        • The tag to add, replace, or remove. Tag names must adhere to the same naming convention for other fields.
      • value (optional)
        • The value to set the tag to.
        • This property is required if operation is addOrReplace or Add.
      • condition (optional)
        • A string containing an Azure Policy language expression with Policy functions that evaluates to true or false.
        • Doesn't support the following Policy functions: field(), resourceGroup(), subscription().

Modify operations

The operations property array makes it possible to alter several tags in different ways from a single policy definition. Each operation is made up of operation, field, and value properties. The operation determines what the remediation task does to the tags, field determines which tag is altered, and value defines the new setting for that tag. The following example makes the following tag changes:

  • Sets the environment tag to "Test" even if it already exists with a different value.
  • Removes the tag TempResource.
  • Sets the Dept tag to the policy parameter DeptName configured on the policy assignment.
"details": {
  ...
  "operations": [
    {
      "operation": "addOrReplace",
      "field": "tags['environment']",
      "value": "Test"
    },
    {
      "operation": "Remove",
      "field": "tags['TempResource']",
    },
    {
      "operation": "addOrReplace",
      "field": "tags['Dept']",
      "value": "[parameters('DeptName')]"
    }
  ]
}

The operation property has the following options:

Operation Description
addOrReplace Adds the defined property or tag and value to the resource, even if the property or tag already exists with a different value.
add Adds the defined property or tag and value to the resource.
remove Removes the defined tag from the resource. Only supported for tags.

Modify examples

Example 1: Add the environment tag and replace existing environment tags with "Test":

"then": {
  "effect": "modify",
  "details": {
    "roleDefinitionIds": [
      "/providers/Microsoft.Authorization/roleDefinitions/b24988ac-6180-42a0-ab88-20f7382dd24c"
    ],
    "operations": [
      {
        "operation": "addOrReplace",
        "field": "tags['environment']",
        "value": "Test"
      }
    ]
  }
}

Example 2: Remove the env tag and add the environment tag or replace existing environment tags with a parameterized value:

"then": {
  "effect": "modify",
  "details": {
    "roleDefinitionIds": [
      "/providers/Microsoft.Authorization/roleDefinitions/b24988ac-6180-42a0-ab88-20f7382dd24c"
    ],
    "conflictEffect": "deny",
    "operations": [
      {
        "operation": "Remove",
        "field": "tags['env']"
      },
      {
        "operation": "addOrReplace",
        "field": "tags['environment']",
        "value": "[parameters('tagValue')]"
      }
    ]
  }
}

Example 3: Ensure that a storage account doesn't allow blob public access, the modify operation is applied only when evaluating requests with API version greater or equals to 2019-04-01:

"then": {
  "effect": "modify",
  "details": {
    "roleDefinitionIds": [
      "/providers/microsoft.authorization/roleDefinitions/17d1049b-9a84-46fb-8f53-869881c3d3ab"
    ],
    "conflictEffect": "audit",
    "operations": [
      {
        "condition": "[greaterOrEquals(requestContext().apiVersion, '2019-04-01')]",
        "operation": "addOrReplace",
        "field": "Microsoft.Storage/storageAccounts/allowBlobPublicAccess",
        "value": false
      }
    ]
  }
}

Next steps