Muokkaa

Jaa


Tutorial: Deploy a Service Fabric cluster running Windows into an Azure virtual network

This tutorial is part one of a series. You learn how to deploy an Azure Service Fabric cluster running Windows into an Azure virtual network and network security group by using PowerShell and a template. When you're finished, you have a cluster running in the cloud to which you can deploy applications. To create a Linux cluster that uses the Azure CLI, see Create a secure Linux cluster on Azure.

This tutorial describes a production scenario. If you want to create a smaller cluster for testing purposes, see Create a test cluster.

In this tutorial, you learn how to:

  • Create a VNET in Azure using PowerShell
  • Create a key vault and upload a certificate
  • Setup Microsoft Entra authentication
  • Configure diagnostics collection
  • Set up the EventStore service
  • Set up Azure Monitor logs
  • Create a secure Service Fabric cluster in Azure PowerShell
  • Secure the cluster with an X.509 certificate
  • Connect to the cluster using PowerShell
  • Remove a cluster

In this tutorial series you learn how to:

Note

We recommend that you use the Azure Az PowerShell module to interact with Azure. To get started, see Install Azure PowerShell. To learn how to migrate to the Az PowerShell module, see Migrate Azure PowerShell from AzureRM to Az.

Prerequisites

Before you begin this tutorial:

The following procedures create a seven-node Service Fabric cluster. Use the Azure Pricing Calculator to calculate cost incurred by running a Service Fabric cluster in Azure.

Download and explore the template

Download the following Azure Resource Manager template files:

This template deploys a secure cluster of seven virtual machines and three node types into a virtual network and a network security group. Other sample templates can be found on GitHub. The azuredeploy.json deploys a number of resources, including the following.

Service Fabric cluster

In the Microsoft.ServiceFabric/clusters resource, a Windows cluster is configured with the following characteristics:

  • Three node types.
  • Five nodes in the primary node type (configurable in the template parameters), and one node in each of the other two node types.
  • OS: Windows Server 2016 Datacenter with Containers (configurable in the template parameters).
  • Certificate secured (configurable in the template parameters).
  • Reverse proxy is enabled.
  • DNS service is enabled.
  • Durability level of Bronze (configurable in the template parameters).
  • Reliability level of Silver (configurable in the template parameters).
  • Client connection endpoint: 19000 (configurable in the template parameters).
  • HTTP gateway endpoint: 19080 (configurable in the template parameters).

Azure Load Balancer

In the Microsoft.Network/loadBalancers resource, a load balancer is configured. Probes and rules are set up for the following ports:

  • Client connection endpoint: 19000
  • HTTP gateway endpoint: 19080
  • Application port: 80
  • Application port: 443
  • Service Fabric reverse proxy: 19081

If other application ports are needed, you'll need to adjust the Microsoft.Network/loadBalancers resource and the Microsoft.Network/networkSecurityGroups resource to allow the traffic in.

Virtual network, subnet, and network security group

The names of the virtual network, subnet, and network security group are declared in the template parameters. Address spaces of the virtual network and subnet are also declared in the template parameters and configured in the Microsoft.Network/virtualNetworks resource:

  • Virtual network address space: 172.16.0.0/20
  • Service Fabric subnet address space: 172.16.2.0/23

The following inbound traffic rules are enabled in the Microsoft.Network/networkSecurityGroups resource. You can change the port values by changing the template variables.

  • ClientConnectionEndpoint (TCP): 19000
  • HttpGatewayEndpoint (HTTP/TCP): 19080
  • SMB: 445
  • Internodecommunication: 1025, 1026, 1027
  • Ephemeral port range: 49152 to 65534 (need a minimum of 256 ports).
  • Ports for application use: 80 and 443
  • Application port range: 49152 to 65534 (used for service to service communication. Other ports aren't opened on the Load balancer).
  • Block all other ports

If other application ports are needed, you'll need to adjust the Microsoft.Network/loadBalancers resource and the Microsoft.Network/networkSecurityGroups resource to allow the traffic in.

Windows Defender

By default, the Windows Defender antivirus program is installed and functional on Windows Server 2016. The user interface is installed by default on some SKUs, but isn't required. For each node type/VM scale set declared in the template, the Azure VM Antimalware extension is used to exclude the Service Fabric directories and processes:

{
"name": "[concat('VMIaaSAntimalware','_vmNodeType0Name')]",
"properties": {
        "publisher": "Microsoft.Azure.Security",
        "type": "IaaSAntimalware",
        "typeHandlerVersion": "1.5",
        "settings": {
        "AntimalwareEnabled": "true",
        "Exclusions": {
                "Paths": "D:\\SvcFab;D:\\SvcFab\\Log;C:\\Program Files\\Microsoft Service Fabric",
                "Processes": "Fabric.exe;FabricHost.exe;FabricInstallerService.exe;FabricSetup.exe;FabricDeployer.exe;ImageBuilder.exe;FabricGateway.exe;FabricDCA.exe;FabricFAS.exe;FabricUOS.exe;FabricRM.exe;FileStoreService.exe"
        },
        "RealtimeProtectionEnabled": "true",
        "ScheduledScanSettings": {
                "isEnabled": "true",
                "scanType": "Quick",
                "day": "7",
                "time": "120"
        }
        },
        "protectedSettings": null
}
}

Set template parameters

The azuredeploy.parameters.json parameters file declares many values used to deploy the cluster and associated resources. The following are parameters to modify for your deployment:

Parameter Example value Notes
adminUserName vmadmin Admin username for the cluster VMs. Username requirements for VM.
adminPassword Password#1234 Admin password for the cluster VMs. Password requirements for VM.
clusterName mysfcluster123 Name of the cluster. Can contain letters and numbers only. Length can be between 3 and 23 characters.
location southcentralus Location of the cluster.
certificateThumbprint

Value should be empty if creating a self-signed certificate or providing a certificate file.

To use an existing certificate previously uploaded to a key vault, fill in the certificate SHA1 thumbprint value. For example, "6190390162C988701DB5676EB81083EA608DCCF3".

certificateUrlValue

Value should be empty if creating a self-signed certificate or providing a certificate file.

To use an existing certificate previously uploaded to a key vault, fill in the certificate URL. For example, "https://mykeyvault.vault.azure.net:443/secrets/mycertificate/02bea722c9ef4009a76c5052bcbf8346".

sourceVaultValue

Value should be empty if creating a self-signed certificate or providing a certificate file.

To use an existing certificate previously uploaded to a key vault, fill in the source vault value. For example, "/subscriptions/333cc2c84-12fa-5778-bd71-c71c07bf873f/resourceGroups/MyTestRG/providers/Microsoft.KeyVault/vaults/MYKEYVAULT".

Set up Microsoft Entra client authentication

For Service Fabric clusters deployed in a public network hosted on Azure, the recommendation for client-to-node mutual authentication is:

  • Use Microsoft Entra ID for client identity.
  • Use a certificate for server identity and TLS encryption of HTTP communication.

Setting up Microsoft Entra ID to authenticate clients for a Service Fabric cluster must be done before creating the cluster. Microsoft Entra ID enables organizations (known as tenants) to manage user access to applications.

A Service Fabric cluster offers several entry points to its management functionality, including the web-based Service Fabric Explorer and Visual Studio. As a result, you create two Microsoft Entra applications to control access to the cluster: one web application and one native application. After the applications are created, you assign users to read-only and admin roles.

Note

You must complete the following steps before you create the cluster. Because the scripts expect cluster names and endpoints, the values should be planned and not values that you have already created.

In this article, we assume that you've already created a tenant. If you haven't, start by reading How to get a Microsoft Entra tenant.

To simplify steps involved in configuring Microsoft Entra ID with a Service Fabric cluster, we've created a set of Windows PowerShell scripts. Download the scripts to your computer.

Create Microsoft Entra applications and assign users to roles

Create two Microsoft Entra applications to control access to the cluster: one web application and one native application. After you've created the applications to represent your cluster, assign your users to the roles supported by Service Fabric: read-only and admin.

Run SetupApplications.ps1, and provide the tenant ID, cluster name, and web application reply URL as parameters. Specify usernames and passwords for the users. For example:

$Configobj = .\SetupApplications.ps1 -TenantId '<MyTenantID>' -ClusterName 'mysfcluster123' -WebApplicationReplyUrl 'https://mysfcluster123.eastus.cloudapp.azure.com:19080/Explorer/index.html' -AddResourceAccess
.\SetupUser.ps1 -ConfigObj $Configobj -UserName 'TestUser' -Password 'P@ssword!123'
.\SetupUser.ps1 -ConfigObj $Configobj -UserName 'TestAdmin' -Password 'P@ssword!123' -IsAdmin

Note

For national clouds (for example Azure Government, Microsoft Azure operated by 21Vianet, Azure Germany), specify the -Location parameter.

You can find your TenantId, or directory ID, in the Azure portal. Select Microsoft Entra ID > Properties and copy the Directory ID value.

ClusterName is used to prefix the Microsoft Entra applications that are created by the script. It doesn't need to exactly match the actual cluster name. It only makes it easier to map Microsoft Entra artifacts to the Service Fabric cluster in use.

WebApplicationReplyUrl is the default endpoint that Microsoft Entra ID returns to your users after they finish signing in. Set this endpoint as the Service Fabric Explorer endpoint for your cluster, which by default is:

https://<cluster_domain>:19080/Explorer

You're prompted to sign in to an account that has administrative privileges for the Microsoft Entra tenant. After you sign in, the script creates the web and native applications to represent your Service Fabric cluster. In the tenant's applications in the Azure portal, you should see two new entries:

  • ClusterName_Cluster
  • ClusterName_Client

The script prints the JSON required by the Resource Manager template when you create the cluster, so it's a good idea to keep the PowerShell window open.

"azureActiveDirectory": {
  "tenantId":"<guid>",
  "clusterApplication":"<guid>",
  "clientApplication":"<guid>"
},

Add Microsoft Entra configuration to use Microsoft Entra ID for client access

In the azuredeploy.json, configure Microsoft Entra ID in the Microsoft.ServiceFabric/clusters section. Add parameters for the tenant ID, cluster application ID, and client application ID.

{
  "$schema": "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json",
  "contentVersion": "1.0.0.0",
  "parameters": {
    ...

    "aadTenantId": {
      "type": "string",
      "defaultValue": "0e3d2646-78b3-4711-b8be-74a381d9890c"
    },
    "aadClusterApplicationId": {
      "type": "string",
      "defaultValue": "cb147d34-b0b9-4e77-81d6-420fef0c4180"
    },
    "aadClientApplicationId": {
      "type": "string",
      "defaultValue": "7a8f3b37-cc40-45cc-9b8f-57b8919ea461"
    }
  },

...

{
  "apiVersion": "2018-02-01",
  "type": "Microsoft.ServiceFabric/clusters",
  "name": "[parameters('clusterName')]",
  ...
  "properties": {
    ...
    "azureActiveDirectory": {
      "tenantId": "[parameters('aadTenantId')]",
      "clusterApplication": "[parameters('aadClusterApplicationId')]",
      "clientApplication": "[parameters('aadClientApplicationId')]"
    },
    ...
  }
}

Add the parameter values in the azuredeploy.parameters.json parameters file. For example:

"aadTenantId": {
"value": "0e3d2646-78b3-4711-b8be-74a381d9890c"
},
"aadClusterApplicationId": {
"value": "cb147d34-b0b9-4e77-81d6-420fef0c4180"
},
"aadClientApplicationId": {
"value": "7a8f3b37-cc40-45cc-9b8f-57b8919ea461"
}

Configure diagnostics collection on the cluster

When you're running a Service Fabric cluster, it's a good idea to collect the logs from all the nodes in a central location. Having the logs in a central location helps you analyze and troubleshoot issues in your cluster, or issues in the applications and services running in that cluster.

One way to upload and collect logs is to use the Azure Diagnostics (WAD) extension, which uploads logs to Azure Storage, and also has the option to send logs to Azure Application Insights or Event Hubs. You can also use an external process to read the events from storage and place them in an analysis platform product, such as Azure Monitor logs or another log-parsing solution.

If you are following this tutorial, diagnostics collection is already configured in the template.

If you have an existing cluster that doesn't have Diagnostics deployed, you can add or update it via the cluster template. Modify the Resource Manager template that's used to create the existing cluster or download the template from the portal. Modify the template.json file by performing the following tasks:

Add a new storage resource to the resources section in the template:

"resources": [
...
{
  "apiVersion": "2015-05-01-preview",
  "type": "Microsoft.Storage/storageAccounts",
  "name": "[parameters('applicationDiagnosticsStorageAccountName')]",
  "location": "[parameters('computeLocation')]",
  "sku": {
    "accountType": "[parameters('applicationDiagnosticsStorageAccountType')]"
  },
  "tags": {
    "resourceType": "Service Fabric",
    "clusterName": "[parameters('clusterName')]"
  }
},
...
]

Next, add parameters for the storage account name and type to the parameters section of the template. Replace the placeholder text storage account name goes here with the name of the storage account you'd like.

"parameters": {
...
"applicationDiagnosticsStorageAccountType": {
    "type": "string",
    "allowedValues": [
    "Standard_LRS",
    "Standard_GRS"
    ],
    "defaultValue": "Standard_LRS",
    "metadata": {
    "description": "Replication option for the application diagnostics storage account"
    }
},
"applicationDiagnosticsStorageAccountName": {
    "type": "string",
    "defaultValue": "**STORAGE ACCOUNT NAME GOES HERE**",
    "metadata": {
    "description": "Name for the storage account that contains application diagnostics data from the cluster"
    }
},
...
}

Next, add the IaaSDiagnostics extension to the extensions array of the VirtualMachineProfile property of each Microsoft.Compute/virtualMachineScaleSets resource in the cluster. If you're using the sample template, there are three virtual machine scale sets (one for each node type in the cluster).

"apiVersion": "2018-10-01",
"type": "Microsoft.Compute/virtualMachineScaleSets",
"name": "[variables('vmNodeType1Name')]",
"properties": {
    ...
    "virtualMachineProfile": {
        "extensionProfile": {
            "extensions": [
                {
                    "name": "[concat(parameters('vmNodeType0Name'),'_Microsoft.Insights.VMDiagnosticsSettings')]",
                    "properties": {
                        "type": "IaaSDiagnostics",
                        "autoUpgradeMinorVersion": true,
                        "protectedSettings": {
                        "storageAccountName": "[parameters('applicationDiagnosticsStorageAccountName')]",
                        "storageAccountKey": "[listKeys(resourceId('Microsoft.Storage/storageAccounts', parameters('applicationDiagnosticsStorageAccountName')),'2015-05-01-preview').key1]",
                        "storageAccountEndPoint": "https://core.windows.net/"
                        },
                        "publisher": "Microsoft.Azure.Diagnostics",
                        "settings": {
                        "WadCfg": {
                            "DiagnosticMonitorConfiguration": {
                            "overallQuotaInMB": "50000",
                            "EtwProviders": {
                                "EtwEventSourceProviderConfiguration": [
                                {
                                    "provider": "Microsoft-ServiceFabric-Actors",
                                    "scheduledTransferKeywordFilter": "1",
                                    "scheduledTransferPeriod": "PT5M",
                                    "DefaultEvents": {
                                    "eventDestination": "ServiceFabricReliableActorEventTable"
                                    }
                                },
                                {
                                    "provider": "Microsoft-ServiceFabric-Services",
                                    "scheduledTransferPeriod": "PT5M",
                                    "DefaultEvents": {
                                    "eventDestination": "ServiceFabricReliableServiceEventTable"
                                    }
                                }
                                ],
                                "EtwManifestProviderConfiguration": [
                                {
                                    "provider": "cbd93bc2-71e5-4566-b3a7-595d8eeca6e8",
                                    "scheduledTransferLogLevelFilter": "Information",
                                    "scheduledTransferKeywordFilter": "4611686018427387904",
                                    "scheduledTransferPeriod": "PT5M",
                                    "DefaultEvents": {
                                    "eventDestination": "ServiceFabricSystemEventTable"
                                    }
                                }
                                ]
                            }
                            }
                        },
                        "StorageAccount": "[parameters('applicationDiagnosticsStorageAccountName')]"
                        },
                        "typeHandlerVersion": "1.5"
                    }
                }
            ...
            ]
        }
    }
}

Configure the EventStore service

The EventStore service is a monitoring option in Service Fabric. EventStore provides a way to understand the state of your cluster or workloads at a given point in time. The EventStore is a stateful Service Fabric service that maintains events from the cluster. The event are exposed through the Service Fabric Explorer, REST and APIs. EventStore queries the cluster directly to get diagnostics data on any entity in your cluster and should be used to help:

  • Diagnose issues in development or testing, or where you might be using a monitoring pipeline
  • Confirm that management actions you are taking on your cluster are being processed correctly
  • Get a "snapshot" of how Service Fabric is interacting with a particular entity

To enable the EventStore service on your cluster, add the following to the fabricSettings property of the Microsoft.ServiceFabric/clusters resource:

"apiVersion": "2018-02-01",
"type": "Microsoft.ServiceFabric/clusters",
"name": "[parameters('clusterName')]",
"properties": {
    ...
    "fabricSettings": [
        ...
        {
            "name": "EventStoreService",
            "parameters": [
                {
                "name": "TargetReplicaSetSize",
                "value": "3"
                },
                {
                "name": "MinReplicaSetSize",
                "value": "1"
                }
            ]
        }
    ]
}

Set up Azure Monitor logs for the cluster

Azure Monitor logs is our recommendation to monitor cluster level events. To set up Azure Monitor logs to monitor your cluster, you need to have diagnostics enabled to view cluster-level events.

The workspace needs to be connected to the diagnostics data coming from your cluster. This log data is stored in the applicationDiagnosticsStorageAccountName storage account, in the WADServiceFabric*EventTable, WADWindowsEventLogsTable, and WADETWEventTable tables.

Add the Azure Log Analytics workspace and add the solution to the workspace:

"resources": [
    ...
    {
        "apiVersion": "2015-11-01-preview",
        "location": "[parameters('omsRegion')]",
        "name": "[parameters('omsWorkspacename')]",
        "type": "Microsoft.OperationalInsights/workspaces",
        "properties": {
            "sku": {
                "name": "Free"
            }
        },
        "resources": [
            {
                "apiVersion": "2015-11-01-preview",
                "name": "[concat(variables('applicationDiagnosticsStorageAccountName'),parameters('omsWorkspacename'))]",
                "type": "storageinsightconfigs",
                "dependsOn": [
                    "[concat('Microsoft.OperationalInsights/workspaces/', parameters('omsWorkspacename'))]",
                    "[concat('Microsoft.Storage/storageAccounts/', variables('applicationDiagnosticsStorageAccountName'))]"
                ],
                "properties": {
                    "containers": [],
                    "tables": [
                        "WADServiceFabric*EventTable",
                        "WADWindowsEventLogsTable",
                        "WADETWEventTable"
                    ],
                    "storageAccount": {
                        "id": "[resourceId('Microsoft.Storage/storageaccounts/', variables('applicationDiagnosticsStorageAccountName'))]",
                        "key": "[listKeys(resourceId('Microsoft.Storage/storageAccounts', variables('applicationDiagnosticsStorageAccountName')),'2015-06-15').key1]"
                    }
                }
            },
            {
                "apiVersion": "2015-11-01-preview",
                "type": "datasources",
                "name": "sampleWindowsPerfCounter",
                "dependsOn": [
                    "[concat('Microsoft.OperationalInsights/workspaces/', parameters('omsWorkspacename'))]"
                ],
                "kind": "WindowsPerformanceCounter",
                "properties": {
                    "objectName": "Memory",
                    "instanceName": "*",
                    "intervalSeconds": 10,
                    "counterName": "Available MBytes"
                }
            },
            {
                "apiVersion": "2015-11-01-preview",
                "type": "datasources",
                "name": "sampleWindowsPerfCounter2",
                "dependsOn": [
                    "[concat('Microsoft.OperationalInsights/workspaces/', parameters('omsWorkspacename'))]"
                ],
                "kind": "WindowsPerformanceCounter",
                "properties": {
                    "objectName": "Service Fabric Service",
                    "instanceName": "*",
                    "intervalSeconds": 10,
                    "counterName": "Average milliseconds per request"
                }
            }
        ]
    },
    {
        "apiVersion": "2015-11-01-preview",
        "location": "[parameters('omsRegion')]",
        "name": "[variables('solution')]",
        "type": "Microsoft.OperationsManagement/solutions",
        "dependsOn": [
            "[concat('Microsoft.OperationalInsights/workspaces/', parameters('omsWorkspacename'))]"
        ],
        "properties": {
            "workspaceResourceId": "[resourceId('Microsoft.OperationalInsights/workspaces/', parameters('omsWorkspacename'))]"
        },
        "plan": {
            "name": "[variables('solution')]",
            "publisher": "Microsoft",
            "product": "[Concat('OMSGallery/', variables('solutionName'))]",
            "promotionCode": ""
        }
    }
]

Next, add parameters

"parameters": {
    ...
    "omsWorkspacename": {
        "type": "string",
        "defaultValue": "mysfomsworkspace",
        "metadata": {
            "description": "Name of your OMS Log Analytics Workspace"
        }
    },
    "omsRegion": {
        "type": "string",
        "defaultValue": "West Europe",
        "allowedValues": [
            "West Europe",
            "East US",
            "Southeast Asia"
        ],
        "metadata": {
            "description": "Specify the Azure Region for your OMS workspace"
        }
    }
}

Next, add variables:

"variables": {
    ...
    "solution": "[Concat('ServiceFabric', '(', parameters('omsWorkspacename'), ')')]",
    "solutionName": "ServiceFabric"
}

Add the Log Analytics agent extension to each virtual machine scale set in the cluster and connect the agent to the Log Analytics workspace. This enables collecting diagnostics data about containers, applications, and performance monitoring. By adding it as an extension to the virtual machine scale set resource, Azure Resource Manager ensures that it gets installed on every node, even when scaling the cluster.

"apiVersion": "2018-10-01",
"type": "Microsoft.Compute/virtualMachineScaleSets",
"name": "[variables('vmNodeType1Name')]",
"properties": {
    ...
    "virtualMachineProfile": {
        "extensionProfile": {
            "extensions": [
                {
                    "name": "[concat(variables('vmNodeType0Name'),'OMS')]",
                    "properties": {
                        "publisher": "Microsoft.EnterpriseCloud.Monitoring",
                        "type": "MicrosoftMonitoringAgent",
                        "typeHandlerVersion": "1.0",
                        "autoUpgradeMinorVersion": true,
                        "settings": {
                            "workspaceId": "[reference(resourceId('Microsoft.OperationalInsights/workspaces/', parameters('omsWorkspacename')), '2015-11-01-preview').customerId]"
                        },
                        "protectedSettings": {
                            "workspaceKey": "[listKeys(resourceId('Microsoft.OperationalInsights/workspaces/', parameters('omsWorkspacename')),'2015-11-01-preview').primarySharedKey]"
                        }
                    }
                }
            ...
            ]
        }
    }
}

Deploy the virtual network and cluster

Next, set up the network topology and deploy the Service Fabric cluster. The azuredeploy.json Resource Manager template creates a virtual network, subnet, and network security group for Service Fabric. The template also deploys a cluster with certificate security enabled. For production clusters, use a certificate from a certificate authority as the cluster certificate. A self-signed certificate can be used to secure test clusters.

The template in this article deploys a cluster that uses the certificate thumbprint to identify the cluster certificate. No two certificates can have the same thumbprint, which makes certificate management more difficult. Switching a deployed cluster from certificate thumbprints to certificate common names simplifies certificate management. To learn how to update the cluster to use certificate common names for certificate management, read Change cluster to certificate common name management.

Create a cluster by using an existing certificate

The following script uses the New-AzServiceFabricCluster cmdlet and a template to deploy a new cluster in Azure. The cmdlet creates a new key vault in Azure and uploads your certificate.

# Variables.
$groupname = "sfclustertutorialgroup"
$clusterloc="southcentralus"  # Must match the location parameter in the template
$templatepath="C:\temp\cluster"

$certpwd="q6D7nN%6ck@6" | ConvertTo-SecureString -AsPlainText -Force
$clustername = "mysfcluster123"  # Must match the clustername parameter in the template
$vaultname = "clusterkeyvault123"
$vaultgroupname="clusterkeyvaultgroup123"
$subname="$clustername.$clusterloc.cloudapp.azure.com"

# Sign in to your Azure account and select your subscription
Connect-AzAccount
Get-AzSubscription
Set-AzContext -SubscriptionId <guid>

# Create a new resource group for your deployment, and give it a name and a location.
New-AzResourceGroup -Name $groupname -Location $clusterloc

# Create the Service Fabric cluster.
New-AzServiceFabricCluster  -ResourceGroupName $groupname -TemplateFile "$templatepath\azuredeploy.json" `
-ParameterFile "$templatepath\azuredeploy.parameters.json" -CertificatePassword $certpwd `
-KeyVaultName $vaultname -KeyVaultResourceGroupName $vaultgroupname -CertificateFile $certpath

Create a cluster by using a new, self-signed certificate

The following script uses the New-AzServiceFabricCluster cmdlet and a template to deploy a new cluster in Azure. The cmdlet creates a new key vault in Azure, adds a new self-signed certificate to the key vault, and downloads the certificate file locally.

# Variables.
$groupname = "sfclustertutorialgroup"
$clusterloc="southcentralus"  # Must match the location parameter in the template
$templatepath="C:\temp\cluster"

$certpwd="q6D7nN%6ck@6" | ConvertTo-SecureString -AsPlainText -Force
$certfolder="c:\mycertificates\"
$clustername = "mysfcluster123"
$vaultname = "clusterkeyvault123"
$vaultgroupname="clusterkeyvaultgroup123"
$subname="$clustername.$clusterloc.cloudapp.azure.com"

# Sign in to your Azure account and select your subscription
Connect-AzAccount
Get-AzSubscription
Set-AzContext -SubscriptionId <guid>

# Create a new resource group for your deployment, and give it a name and a location.
New-AzResourceGroup -Name $groupname -Location $clusterloc

# Create the Service Fabric cluster.
New-AzServiceFabricCluster  -ResourceGroupName $groupname -TemplateFile "$templatepath\azuredeploy.json" `
-ParameterFile "$templatepath\azuredeploy.parameters.json" -CertificatePassword $certpwd `
-CertificateOutputFolder $certfolder -KeyVaultName $vaultname -KeyVaultResourceGroupName $vaultgroupname -CertificateSubjectName $subname

Connect to the secure cluster

Connect to the cluster by using the Service Fabric PowerShell module installed with the Service Fabric SDK. First, install the certificate into the Personal (My) store of the current user on your computer. Run the following PowerShell command:

$certpwd="q6D7nN%6ck@6" | ConvertTo-SecureString -AsPlainText -Force
Import-PfxCertificate -Exportable -CertStoreLocation Cert:\CurrentUser\My `
        -FilePath C:\mycertificates\mysfcluster20170531104310.pfx `
        -Password $certpwd

You're now ready to connect to your secure cluster.

The Service Fabric PowerShell module provides many cmdlets for managing Service Fabric clusters, applications, and services. Use the Connect-ServiceFabricCluster cmdlet to connect to the secure cluster. The certificate SHA1 thumbprint and connection endpoint details are found in the output from the previous step.

If you previously set up Microsoft Entra client authentication, run the following command:

Connect-ServiceFabricCluster -ConnectionEndpoint mysfcluster123.southcentralus.cloudapp.azure.com:19000 `
        -KeepAliveIntervalInSec 10 `
        -AzureActiveDirectory `
        -ServerCertThumbprint C4C1E541AD512B8065280292A8BA6079C3F26F10

If you didn't set up Microsoft Entra client authentication, run the following command:

Connect-ServiceFabricCluster -ConnectionEndpoint mysfcluster123.southcentralus.cloudapp.azure.com:19000 `
          -KeepAliveIntervalInSec 10 `
          -X509Credential -ServerCertThumbprint C4C1E541AD512B8065280292A8BA6079C3F26F10 `
          -FindType FindByThumbprint -FindValue C4C1E541AD512B8065280292A8BA6079C3F26F10 `
          -StoreLocation CurrentUser -StoreName My

Check that you're connected and that the cluster is healthy by using the Get-ServiceFabricClusterHealth cmdlet.

Get-ServiceFabricClusterHealth

Clean up resources

The other articles in this tutorial series use the cluster you've created. If you're not immediately moving on to the next article, you might want to delete the cluster to avoid incurring charges.

Next steps

Advance to the following tutorial to learn how to scale your cluster.

  • Create a VNET in Azure using PowerShell
  • Create a key vault and upload a certificate
  • Setup Microsoft Entra authentication
  • Configure diagnostics collection
  • Set up the EventStore service
  • Set up Azure Monitor logs
  • Create a secure Service Fabric cluster in Azure PowerShell
  • Secure the cluster with an X.509 certificate
  • Connect to the cluster using PowerShell
  • Remove a cluster

Next, advance to the following tutorial to learn how to monitor your cluster.