Get-MailTrafficPolicyReport
This cmdlet is available only in the cloud-based service.
Use the Get-MailTrafficPolicyReport cmdlet to view statistics about messages that were affected by data loss prevention (DLP) policies and transport rules for the last 90 days.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Get-MailTrafficPolicyReport
[-Action <MultiValuedProperty>]
[-AggregateBy <String>]
[-Direction <MultiValuedProperty>]
[-DlpPolicy <MultiValuedProperty>]
[-Domain <MultiValuedProperty>]
[-EndDate <DateTime>]
[-EventType <MultiValuedProperty>]
[-Page <Int32>]
[-PageSize <Int32>]
[-ProbeTag <String>]
[-StartDate <DateTime>]
[-SummarizeBy <MultiValuedProperty>]
[-TransportRule <MultiValuedProperty>]
[<CommonParameters>] Description
For the reporting period you specify, the cmdlet returns the following information:
- Domain
- Date
- DLP Policy
- Transport Rule
- Event Type
- Direction
- Message Count
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Get-MailTrafficPolicyReport -Direction Outbound -StartDate 06/13/2015 -EndDate 06/15/2015This example retrieves the statics for outgoing messages between June 13, 2015 and June 15, 2015 that were affected by DLP policies and transport rules.
Example 2
Get-MailTrafficPolicyReport -StartDate 12/12/2015 -EndDate 12/12/2015 -Direction Outbound | Format-Table Domain,Date,EventType,Action,MessageCountThis example retrieves the statics for outgoing messages on December 12, 2015 and displays the results in a table. Every unique combination of EventType and Action is displayed on a separate row in the table.
Example 3
Get-MailTrafficPolicyReport -StartDate 12/12/2015 -EndDate 12/12/2015 -Direction Outbound -SummarizeBy Domain,DlpPolicy,TransportRule,EventType | Format-Table Domain,Date,EventType,Action,MessageCountThis example is similar to the previous example, but now the results are summarized. Because the EventType is one of the summarized values, the rows in the table now contain the unique values of Action. The total number of rows in the report is reduced, and values of MessageCount are correspondingly larger on each row.
Parameters
-Action
The Action parameter filters the report by the action taken on messages. To view the complete list of valid values for this parameter, run the command: Get-MailFilterListReport -SelectionTarget Actions. The action you specify must correspond to the report type. For example, you can only specify malware filter actions for malware reports.
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-AggregateBy
The AggregateBy parameter specifies the reporting period. Valid values are Hour, Day, or Summary. The default value is Day.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Direction
The Direction parameter filters the results by incoming or outgoing messages. Valid values are:
- Inbound
- Outbound
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-DlpPolicy
The DlpPolicy parameter filters the report by the name of the DLP policy. You can specify multiple values separated by commas. If the value contains spaces, enclose the value in quotation marks (").
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Domain
The Domain parameter filters the results by an accepted domain in the cloud-based organization. You can specify multiple domain values separated by commas, or the value All.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-EndDate
The EndDate parameter specifies the end date of the date range.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-EventType
The EventType parameter filters the report by the event type. Valid values are:
- DLPActionHits
- DLPPolicyFalsePositive
- DLPPolicyHits
- DLPPolicyOverride
- DLPRuleHits
- TransportRuleActionHits
- TransportRuleHits
To view the potential list of valid values for this parameter, run the command: Get-MailFilterListReport -SelectionTarget EventTypes. The event type you specify must correspond to the report. For example, you can only specify policy event types for policy reports.
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Page
The Page parameter specifies the page number of the results you want to view. Valid input for this parameter is an integer between 1 and 1000. The default value is 1.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-PageSize
The PageSize parameter specifies the maximum number of entries per page. Valid input for this parameter is an integer between 1 and 5000. The default value is 1000.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-ProbeTag
This parameter is reserved for internal Microsoft use.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-StartDate
The StartDate parameter specifies the start date of the date range.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-SummarizeBy
The SummarizeBy parameter returns totals based on the values you specify. If your report filters data using any of the values accepted by this parameter, you can use the SummarizeBy parameter to summarize the results based on those values. To decrease the number of rows returned in the report, consider using the SummarizeBy parameter. Summarizing reduces the amount of data that's retrieved for the report, and delivers the report faster. For example, instead of seeing each instance of a specific value of EventType on an individual row in the report, you can use the SummarizeBy parameter to see the total number of instances of that value of EventType on one row in the report.
For this cmdlet, valid values are:
- Action
- Direction
- DLPPolicy
- Domain
- EventType
- TransportRule
You can specify multiple values separated by commas. When you specify the values DLPPolicy, Domain, EventType, or TransportRule the value is not displayed in the results (the values in the corresponding columns are blank).
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-TransportRule
The TransportRule parameter filters the report by the name of the transport rule. You can specify multiple values separated by commas. If the value contains spaces, enclose the value in quotation marks (").
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.