Muokkaa

Jaa


Get-MobileDevice

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Get-MobileDevice cmdlet to get the list of devices in your organization that have active partnerships.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Get-MobileDevice
   -Mailbox <MailboxIdParameter>
   [-ActiveSync]
   [-DomainController <Fqdn>]
   [-Filter <String>]
   [-Monitoring]
   [-OrganizationalUnit <OrganizationalUnitIdParameter>]
   [-OWAforDevices]
   [-ResultSize <Unlimited>]
   [-SortBy <String>]
   [-RestApi]
   [-UniversalOutlook]
   [<CommonParameters>]
Get-MobileDevice
   [[-Identity] <MobileDeviceIdParameter>]
   [-ActiveSync]
   [-DomainController <Fqdn>]
   [-Filter <String>]
   [-Monitoring]
   [-OrganizationalUnit <OrganizationalUnitIdParameter>]
   [-OWAforDevices]
   [-ResultSize <Unlimited>]
   [-SortBy <String>]
   [-RestApi]
   [-UniversalOutlook]
   [<CommonParameters>]

Description

The Get-MobileDevice cmdlet returns identification, configuration, and status information for each mobile device.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Get-MobileDevice -Mailbox "Tony Smith"

This example returns all the mobile devices that Tony Smith has used that are associated with his mailbox.

Example 2

Get-MobileDevice -ResultSize unlimited | Format-Table -Auto DeviceModel,Identity

This example returns a summary list of all mobile devices in the organization.

Example 3

Get-MobileDevice -Identity Lila\ExchangeActiveSyncDevices\REST§Outlook§5eec4e941e0748a264512fd83770d5ac | Format-List

This example returns detailed information about the specified device on Lila's mailbox.

Parameters

-ActiveSync

The ActiveSync switch filters the results by Exchange ActiveSync devices. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Filter

The Filter parameter uses OPATH syntax to filter the results by the specified properties and values. The search criteria uses the syntax "Property -ComparisonOperator 'Value'".

  • Enclose the whole OPATH filter in double quotation marks " ". If the filter contains system values (for example, $true, $false, or $null), use single quotation marks ' ' instead. Although this parameter is a string (not a system block), you can also use braces { }, but only if the filter doesn't contain variables.
  • Property is a filterable property.
  • ComparisonOperator is an OPATH comparison operator (for example -eq for equals and -like for string comparison). For more information about comparison operators, see about_Comparison_Operators.
  • Value is the property value to search for. Enclose text values and variables in single quotation marks ('Value' or '$Variable'). If a variable value contains single quotation marks, you need to identify (escape) the single quotation marks to expand the variable correctly. For example, instead of '$User', use '$($User -Replace "'","''")'. Don't enclose integers or system values in quotation marks (for example, use 500, $true, $false, or $null instead).

You can chain multiple search criteria together using the logical operators -and and -or. For example, "Criteria1 -and Criteria2" or "(Criteria1 -and Criteria2) -or Criteria3".

For detailed information about OPATH filters in Exchange, see Additional OPATH syntax information.

You can filter by the following properties:

  • ClientType
  • DeviceAccessControlRule
  • DeviceAccessState
  • DeviceAccessStateReason
  • DeviceActiveSyncVersion
  • DeviceId
  • DeviceImei
  • DeviceMobileOperator
  • DeviceModel
  • DeviceOS
  • DeviceOSLanguage
  • DeviceTelephoneNumber
  • DeviceType
  • DeviceUserAgent
  • FirstSyncTime
  • FriendlyName
  • ProvisioningFlags
  • UserDisplayName
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Identity

The Identity parameter specifies the mobile device that you want to view. You can use the following values that uniquely identifies the mobile device:

  • Identity (<Mailbox Name>\ExchangeActiveSyncDevices\<MobileDeviceObjectName> for example, CarlosM\ExchangeActiveSyncDevices\REST§Outlook§5eec4e941e0748a264512fd83770d5ac)
  • Distinguished name (DN)
  • GUID (same as ExchangeObjectId)
Type:MobileDeviceIdParameter
Position:1
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Mailbox

The Mailbox parameter filters the results by mailbox. You can use any value that uniquely identifies the mailbox. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)

You can't use this parameter with the Identity parameter.

Type:MailboxIdParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Monitoring

This parameter is available only in on-premises Exchange.

The Monitoring switch is required to return monitoring mailboxes in the results. You don't need to specify a value with this switch.

Monitoring mailboxes are associated with managed availability and the Exchange Health Manager service, and have a RecipientTypeDetails property value of MonitoringMailbox.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-OrganizationalUnit

The OrganizationalUnit parameter filters the results based on the object's location in Active Directory. Only objects that exist in the specified location are returned. Valid input for this parameter is an organizational unit (OU) or domain that's returned by the Get-OrganizationalUnit cmdlet. You can use any value that uniquely identifies the OU or domain. For example:

  • Name
  • Canonical name
  • Distinguished name (DN)
  • GUID
Type:OrganizationalUnitIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-OWAforDevices

The OWAforDevices switch filters the results by whether Outlook on the web for devices is enabled for the device. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RestApi

The RestApi switch filters the results by REST API devices. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-ResultSize

The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-SortBy

The SortBy parameter specifies the property to sort the results by. You can sort by only one property at a time. The results are sorted in ascending order.

If the default view doesn't include the property you're sorting by, you can append the command with | Format-Table -Auto Property1,Property2,...PropertyX. to create a new view that contains all of the properties that you want to see. Wildcards (*) in the property names are supported.

You can sort by the following properties:

  • DeviceAccessControlRule
  • DeviceAccessState
  • DeviceAccessStateReason
  • DeviceId
  • DeviceImei
  • DeviceMobileOperator
  • DeviceModel
  • DeviceOS
  • DeviceOSLanguage
  • DeviceTelephoneNumber
  • DeviceType
  • DeviceUserAgent
  • FirstSyncTime
  • FriendlyName
  • UserDisplayName
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-UniversalOutlook

The UniversalOutlook switch filters the results by Mail and Calendar devices. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.