Muokkaa

Jaa


New-DeliveryAgentConnector

This cmdlet is available only in on-premises Exchange.

The New-DeliveryAgentConnector cmdlet creates a delivery agent connector in your organization.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

New-DeliveryAgentConnector
   [-Name] <String>
   -AddressSpaces <MultiValuedProperty>
   -DeliveryProtocol <String>
   [-Comment <String>]
   [-Confirm]
   [-DomainController <Fqdn>]
   [-Enabled <Boolean>]
   [-IsScopedConnector <Boolean>]
   [-MaxConcurrentConnections <Int32>]
   [-MaxMessageSize <Unlimited>]
   [-MaxMessagesPerConnection <Int32>]
   [-SourceTransportServers <MultiValuedProperty>]
   [-WhatIf]
   [<CommonParameters>]

Description

Delivery agent connectors are used to route messages addressed to foreign systems that don't utilize the SMTP protocol. When a message is routed to a delivery agent connector, the associated delivery agent performs the content conversion and message delivery. Delivery agent connectors allow queue management of foreign connectors, thereby eliminating the need for storing messages on the file system in the Drop and Pickup directories. For more information, see Delivery agents and Delivery Agent connectors.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

New-DeliveryAgentConnector -Name "Contoso X.400 Connector" -AddressSpaces "X400:c=US;a=Fabrikam;p=Contoso;1" -DeliveryProtocol "X.400" -SourceTransportServers Hub01,Hub02,Hub05

This example creates a delivery agent connector named Contoso X.400 Connector with the following configuration:

The delivery agent connector is hosted on the following servers:

  • Hub01
  • Hub02
  • Hub05

The delivery agent connector is designed to handle X.400 connections to a company called Contoso that uses the carrier Fabrikam.

The address space for the connector is c=US;a=Fabrikam;p=Contoso.

Parameters

-AddressSpaces

The AddressSpaces parameter specifies the domain names that the delivery agent connector is responsible for. The complete syntax for entering an address space is: AddressSpaceType:AddressSpace;AddressSpaceCost. Enclose each address space in quotation marks (").

Type:MultiValuedProperty
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Comment

The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DeliveryProtocol

The DeliveryProtocol parameter specifies the communication protocol that determines which delivery agents are responsible for servicing the connector.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Enabled

The Enabled parameter specifies whether the delivery agent connector is enabled.

The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IsScopedConnector

The IsScopedConnector parameter specifies the availability of the connector to other Mailbox servers. If the value of this parameter is $false, the connector can be used by all Mailbox servers in your organization. If the value of this parameter is $true, the connector can only be used by Mailbox servers in the same Active Directory site. The default value is $false.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MaxConcurrentConnections

The MaxConcurrentConnections parameter specifies the maximum number of concurrent connections this connector accepts from a specific IP address. The default value is 5.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MaxMessageSize

The MaxMessageSize parameter specifies the maximum size of a message that's allowed to pass through this connector. When you enter a value, qualify the value with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)

Unqualified values are treated as bytes. The valid input range for this parameter is from 65536 through 2147483647 bytes. The default value is unlimited.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MaxMessagesPerConnection

The MaxMessagesPerConnection parameter specifies the maximum number of messages this connector accepts per connection. The connector terminates the connection after this limit is reached, and the sending server has to initiate a new connection to send more messages. The default value is 20.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Name

The Name parameter specifies the name of this delivery agent connector. The value for the Name parameter can't exceed 64 characters.

Type:String
Position:1
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-SourceTransportServers

The SourceTransportServers parameter specifies the list of Mailbox servers that host this connector. You can specify more than one server by separating their names with commas.

By default, only the local server on which the command is executed is added to this parameter.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.