Muokkaa

Jaa


New-PublicFolderMigrationRequest

This cmdlet is available only in on-premises Exchange.

Use the New-PublicFolderMigrationRequest cmdlet to start a serial public folder migration from Exchange Server 2010.

Note: Support for serial migration of public folders ended in Exchange 2013 Cumulative Update 8 (CU8), and the cmdlets are no longer available in Exchange Online. Instead, use the corresponding *-MigrationBatch and *-PublicFolderMailboxMigration* cmdlets.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

New-PublicFolderMigrationRequest
   [[-Name] <String>]
   -SourceDatabase <DatabaseIdParameter>
   [-AcceptLargeDataLoss]
   [-BadItemLimit <Unlimited>]
   [-BatchName <String>]
   [-CompletedRequestAgeLimit <Unlimited>]
   [-Confirm]
   [-CSVData <Byte[]>]
   [-CSVStream <Stream>]
   [-DomainController <Fqdn>]
   [-InternalFlags <InternalMrsFlag[]>]
   [-LargeItemLimit <Unlimited>]
   [-MigrationMailbox <MailboxIdParameter>]
   [-Priority <RequestPriority>]
   [-RequestExpiryInterval <Unlimited>]
   [-SkipMerging <SkippableMergeComponent[]>]
   [-SourceEndpoint <MigrationEndpointIdParameter>]
   [-Suspend]
   [-SuspendComment <String>]
   [-WhatIf]
   [-WorkloadType <RequestWorkloadType>]
   [<CommonParameters>]

Description

Migrating public folders is a multi-step process. For more information before you attempt a public folder migration, see Use serial migration to migrate public folders to Exchange 2013 from previous versions.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

New-PublicFolderMigrationRequest -SourceDatabase PFDB01 -CSVData ([System.IO.File]::ReadAllBytes('C:\PFMigration\CSVData.csv'))

This example creates a public folder migration request from the Exchange 2010 source public folder database PFDB01 and uses the CSVData.csv file that was created using the Export-PublicFolderStatistics.ps1 script. For more information, see Use serial migration to migrate public folders to Exchange 2013 from previous versions.

Parameters

-AcceptLargeDataLoss

The AcceptLargeDataLoss switch specifies the request should continue even if a large number of items in the source mailbox can't be copied to the target mailbox. You don't need to specify a value with this switch.

You need to use this switch if you set the LargeItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-BadItemLimit

The BadItemLimit parameter specifies the maximum number of bad items that are allowed before the request fails. A bad item is a corrupt item in the source mailbox that can't be copied to the target mailbox. Also included in the bad item limit are missing items. Missing items are items in the source mailbox that can't be found in the target mailbox when the request is ready to complete.

Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any bad items are detected. If you are OK with leaving a few bad items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed. If too many bad items are detected, consider using the New-MailboxRepairRequest cmdlet to attempt to fix corrupted items in the source mailbox, and try the request again.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-BatchName

The BatchName parameter specifies a descriptive name for the public folder migration batch. You can use the BatchName parameter as a search string when you use the Get-PublicFolderMigrationRequest cmdlet.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-CompletedRequestAgeLimit

The CompletedRequestAgeLimit parameter specifies how long the request is kept after it has completed before being automatically removed. The default CompletedRequestAgeLimit parameter value is 30 days.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-CSVData

The CSVData parameter specifies the mapping file output generated by the PublicFoldertoMailboxMapGenerator.ps1 script. Use this parameter for local migrations.

A valid value for this parameter requires you to read the file to a byte-encoded object using the following syntax: ([System.IO.File]::ReadAllBytes('<Path>\<FileName>')). You can use this command as the parameter value, or you can write the output to a variable ($data = [System.IO.File]::ReadAllBytes('<Path>\<FileName>')) and use the variable as the parameter value ($data).

You can't use this parameter with the CSVStream parameter, but you need to use it if you don't use CSVStream parameter.

Type:Byte[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-CSVStream

The CSVStream parameter specifies the mapping file output generated by the PublicFoldertoMailboxMapGenerator.ps1 script. Use this parameter for remote migrations.

You can't use this parameter with the CSVData parameter, but you need to use it if you don't use CSVData parameter.

Type:Stream
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-InternalFlags

The InternalFlags parameter specifies the optional steps in the request. This parameter is used primarily for debugging purposes.

Type:InternalMrsFlag[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-LargeItemLimit

The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.

For more information about maximum message size values, see the following topics:

Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any large items are detected. If you are OK with leaving a few large items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed.

If you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MigrationMailbox

This parameter is reserved for internal Microsoft use.

Type:MailboxIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-Name

The Name parameter specifies the name of the public folder migration request. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:1
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Priority

The Priority parameter specifies the order in which the request should be processed in the request queue. Requests are processed in order, based on server health, status, priority, and last update time. Valid priority values are:

  • Lowest
  • Lower
  • Low
  • Normal: This is the default value.
  • High
  • Higher
  • Highest
  • Emergency
Type:RequestPriority
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-RequestExpiryInterval

The RequestExpiryInterval parameter specifies an age limit for a completed or failed request. When you use this parameter, the completed or failed request is automatically removed after the specified interval expires. If you don't use this parameter:

  • The completed request is automatically removed based on the CompletedRequestAgeLimit parameter value.
  • If the request fails, you need to manually remove it by using the corresponding Remove-*Request cmdlet.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes and ss = seconds.

When you use the value Unlimited, the completed request isn't automatically removed.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-SkipMerging

The SkipMerging parameter specifies whether certain stages of a public folder migration are skipped for debugging purposes. Don't use this parameter unless directed to do so by a Microsoft Customer Service and Support or specific documentation.

Type:SkippableMergeComponent[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-SourceDatabase

The SourceDatabase parameter specifies the target database for the public folders. You can use any value that uniquely identifies the database. For example:

  • Name
  • Distinguished name (DN)
  • GUID
Type:DatabaseIdParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-SourceEndpoint

This parameter is reserved for internal Microsoft use.

Type:MigrationEndpointIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-Suspend

The Suspend switch specifies whether to suspend the request. You don't need to specify a value with this switch.

If you use this switch, the request is queued, but the request won't reach the status of InProgress until you resume the request with the relevant resume cmdlet.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-SuspendComment

The SuspendComment parameter specifies a description about why the request was suspended. You can only use this parameter if you specify the Suspend parameter.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WorkloadType

This parameter is reserved for internal Microsoft use.

Type:RequestWorkloadType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.