Muokkaa

Jaa


New-TenantAllowBlockListItems

This cmdlet is available only in the cloud-based service.

Use the New-TenantAllowBlockListItems cmdlet to add entries to the Tenant Allow/Block List in the Microsoft Defender portal.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

New-TenantAllowBlockListItems
   -Entries <String[]>
   -ListType <ListType>
   [-ExpirationDate <DateTime>]
   [-Allow]
   [-Block]
   [-ListSubType <ListSubType>]
   [-LogExtraDetails]
   [-Notes <String>]
   [-OutputJson]
   [-RemoveAfter <Int32>]
   [-SubmissionID <String>]
   [<CommonParameters>]
New-TenantAllowBlockListItems
   -Entries <String[]>
   -ListType <ListType>
   [-NoExpiration]
   [-Allow]
   [-Block]
   [-ListSubType <ListSubType>]
   [-LogExtraDetails]
   [-Notes <String>]
   [-OutputJson]
   [-RemoveAfter <Int32>]
   [-SubmissionID <String>]
   [<CommonParameters>]

Description

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

New-TenantAllowBlockListItems -ListType Url -Block -Entries ~contoso.com~

This example adds a URL block entry for contoso.com and all subdomains (for example, contoso.com, www.contoso.com, xyz.abc.contoso.com, and www.contoso.com/b). Because we didn't use the ExpirationDate or NoExpiration parameters, the entry expires after 30 days.

Example 2

New-TenantAllowBlockListItems -ListType FileHash -Block -Entries "768a813668695ef2483b2bde7cf5d1b2db0423a0d3e63e498f3ab6f2eb13ea3","2c0a35409ff0873cfa28b70b8224e9aca2362241c1f0ed6f622fef8d4722fd9a" -NoExpiration

This example adds a file block entry for the specified files that never expires.

Example 3

New-TenantAllowBlockListItems -Allow -ListType Url -ListSubType AdvancedDelivery -Entries *.fabrikam.com -NoExpiration

This example adds a URL allow entry for the specified third-party phishing simulation URL with no expiration. For more information, see Configure the advanced delivery policy for third-party phishing simulations and email delivery to SecOps mailboxes.

Parameters

-Allow

The Allow switch specifies that you're creating an allow entry. You don't need to specify a value with this switch.

You can't use this switch with the Block switch.

Note: See Allow entries in the Tenant Allow/Block List, before you try to create an allow entry.

You can also use allow entries for third-party phishing simulation URLs with no expiration. For more information, see Configure the advanced delivery policy for third-party phishing simulations and email delivery to SecOps mailboxes.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-Block

The Allow switch specifies that you're creating a block entry. You don't need to specify a value with this switch.

You can't use this switch with the Allow switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-Entries

The Entries parameter specifies the values that you want to add to the Tenant Allow/Block List based on the ListType parameter value:

  • FileHash: Use the SHA256 hash value of the file. In Windows, you can find the SHA256 hash value by running the following command in a Command Prompt: certutil.exe -hashfile "<Path>\<Filename>" SHA256. An example value is 768a813668695ef2483b2bde7cf5d1b2db0423a0d3e63e498f3ab6f2eb13ea3.

  • Sender: A domain or email address value. For example, contoso.com or michelle@contoso.com.

  • URL: Use IPv4 or IPv6 addresses or hostnames. Wildcards (* and ~) are supported in hostnames. Protocols, TCP/UDP ports, or user credentials are not supported. For details, see URL syntax for the Tenant Allow/Block List.

  • IP: IPv6 addresses only:

    • Single IPv6 addresses in colon-hexadecimal format (for example, 2001:0db8:85a3:0000:0000:8a2e:0370:7334).

    • Single IPv6 addresses in zero-compression format (for example, 2001:db8::1 for 2001:0db8:0000:0000:0000:0000:0000:0001).

    • CIDR IPv6 ranges from 1 to 128 (for example, 2001:0db8::/32).

To enter multiple values, use the following syntax: "Value1","Value2",..."ValueN".

Entry limits for each list subtype (sender, URL, file, or IP address):

  • Exchange Online Protection: The maximum number of allow entries is 500, and the maximum number of block entries is 500.
  • Defender for Office 365 Plan 1: The maximum number of allow entries is 1000, and the maximum number of block entries is 1000.
  • Defender for Office 365 Plan 2: The maximum number of allow entries is 5000, and the maximum number of block entries is 10000.

The maximum number of characters in a file entry is 64 and the maximum number of characters in a URL entry is 250.

You can't mix value types (sender, URL, file, or IP address) or allow and block actions in the same command.

In most cases, you can't modify the sender, URL, file, or IP address values after you create the entry. The only exception is URL allow entries for phishing simulations (ListType = URL, ListSubType = AdvancedDelivery).

Type:String[]
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-ExpirationDate

The ExpirationDate parameter set the expiration date of the entry in Coordinated Universal Time (UTC).

To specify a date/time value for this parameter, use either of the following options:

  • Specify the date/time value in UTC: For example, "2021-05-06 14:30:00z".
  • Specify the date/time value as a formula that converts the date/time in your local time zone to UTC: For example, (Get-Date "5/6/2020 9:30 AM").ToUniversalTime(). For more information, see Get-Date.

You can't use this parameter with the NoExpiration or RemoveAfter parameters.

Type:DateTime
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-ListSubType

The ListSubType parameter specifies the subtype for this entry. Valid values are:

Type:ListSubType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-ListType

The ListType parameter specifies the type of entry to add. Valid values are:

  • FileHash
  • Sender
  • Url
  • IP
Type:ListType
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-LogExtraDetails

{{ Fill LogExtraDetails Description }}

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-NoExpiration

The NoExpiration switch specifies that the entry should never expire. You don't need to specify a value with this switch.

This switch is available to use in the following scenarios:

  • With the Block switch.
  • With the Allow switch where the ListType parameter value is URL and the ListSubType parameter value is AdvancedDelivery.
  • With the Allow switch where the ListType parameter value is IP.

You can't use this switch with the ExpirationDate or RemoveAfter parameter.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-Notes

The Notes parameters specifies additional information about the object. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-OutputJson

The OutputJson switch specifies whether to return all entries in a single JSON value. You don't need to specify a value with this switch.

You use this switch to prevent the command from halting on the first entry that contains a syntax error.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-RemoveAfter

The RemoveAfter parameter enables the Remove on > 45 days after last used date feature for an allow entry. The LastUsedDate property is populated when the bad entity in the allow entry is encountered by the filtering system during mail flow or time of click. The allow entry is kept for 45 days after the filtering system determines that the entity is clean.

The only valid value for this parameter is 45.

You can't use this parameter with the ExpirationDate or NoExpirationDate parameters.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection

-SubmissionID

This parameter is reserved for internal Microsoft use.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Security & Compliance, Exchange Online Protection