Muokkaa

Jaa


Set-MalwareFilterRule

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-MalwareFilterRule cmdlet to modify malware filter rules in your organization.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-MalwareFilterRule
   [-Identity] <RuleIdParameter>
   [-Comments <String>]
   [-Confirm]
   [-DomainController <Fqdn>]
   [-ExceptIfRecipientDomainIs <Word[]>]
   [-ExceptIfSentTo <RecipientIdParameter[]>]
   [-ExceptIfSentToMemberOf <RecipientIdParameter[]>]
   [-MalwareFilterPolicy <MalwareFilterPolicyIdParameter>]
   [-Name <String>]
   [-Priority <Int32>]
   [-RecipientDomainIs <Word[]>]
   [-SentTo <RecipientIdParameter[]>]
   [-SentToMemberOf <RecipientIdParameter[]>]
   [-WhatIf]
   [<CommonParameters>]

Description

Important

Different types of recipient conditions use AND logic (the recipient must satisfy all specified conditions). Different types of recipient exceptions use OR logic (the recipient must satisfy any of the specified exceptions). For more information, see Anti-malware policies.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-MalwareFilterRule "Contoso Recipients" -ExceptIfSentToMemberOf "Contoso Human Resources"

This example adds an exception to the malware filter rule named Contoso Recipients for members of the distribution group named Contoso Human Resources.

Parameters

-Comments

The Comments parameter specifies informative comments for the rule, such as what the rule is used for or how it has changed over time. The length of the comment can't exceed 1024 characters.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ExceptIfRecipientDomainIs

The ExceptIfRecipientDomainIs parameter specifies an exception that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.

Type:Word[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ExceptIfSentTo

The ExceptIfSentTo parameter specifies an exception that looks for recipients in messages. You can use any value that uniquely identifies the recipient. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

Type:RecipientIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ExceptIfSentToMemberOf

The ExceptIfSentToMemberOf parameter specifies an exception that looks for messages sent to members of distribution groups, mail-enabled security groups, or sent to Microsoft 365 Groups. You can use any value that uniquely identifies the group. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

If you remove the group after you create the rule, no exception is made for messages that are sent to members of the group.

Type:RecipientIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Identity

The Identity parameter specifies the malware filter rule that you want to view. You can use any value that uniquely identifies the rule. For example, you can use the name, GUID, or distinguished name (DN) of the malware filter rule.

Type:RuleIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-MalwareFilterPolicy

The MalwareFilterPolicy parameter specifies the malware filter policy that's associated with the malware filter rule.

You can use any value that uniquely identifies the policy. For example:

  • Name
  • Distinguished name (DN)
  • GUID.

You can't specify the default malware filter policy, and you can't specify a policy that's already associated with another malware filter rule.

Type:MalwareFilterPolicyIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Name

The Name parameter specifies a unique name for the malware filter rule.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Priority

The Priority parameter specifies a priority value for the rule that determines the order of rule processing. A lower integer value indicates a higher priority, the value 0 is the highest priority, and rules can't have the same priority value.

Valid values and the default value for this parameter depend on the number of existing rules. For example, if there are 8 existing rules:

  • Valid priority values for the existing 8 rules are from 0 through 7.
  • Valid priority values for a new rule (the 9th rule) are from 0 through 8.
  • The default value for a new rule (the 9th rule) is 8.

If you modify the priority value of a rule, the position of the rule in the list changes to match the priority value you specify. In other words, if you set the priority value of a rule to the same value as an existing rule, the priority value of the existing rule and all other lower priority rules after it is increased by 1.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-RecipientDomainIs

The RecipientDomainIs parameter specifies a condition that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.

Type:Word[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SentTo

The SentTo parameter specifies a condition that looks for recipients in messages. You can use any value that uniquely identifies the recipient. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

Type:RecipientIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SentToMemberOf

The SentToMemberOf parameter specifies a condition that looks for messages sent to members of distribution groups, mail-enabled security groups, or sent to Microsoft 365 Groups. You can use any value that uniquely identifies the group. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

If you remove the group after you create the rule, no action is taken on messages that are sent to members of the group.

Type:RecipientIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.