Muokkaa

Jaa


Test-CalendarConnectivity

This cmdlet is available only in on-premises Exchange.

Use the Test-CalendarConnectivity cmdlet to verify that anonymous calendar sharing is enabled and working properly. The Calendar virtual directory is a subdirectory of the Microsoft Outlook on the web virtual directories. When you run this command without any parameters, the command tests calendar connectivity against all Outlook on the web virtual directories.

Note: This cmdlet works best in Exchange 2010. In later versions of Exchange, the functionality of this cmdlet has been replaced by Managed Availability. For the best results, use the Invoke-MonitoringProbe cmdlet and specify the relevant active monitor probe instead of using this cmdlet.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Test-CalendarConnectivity
    [[-ClientAccessServer] <ServerIdParameter>]
    [-Confirm]
    [-DomainController <Fqdn>]
    [-LightMode]
    [-MailboxServer <ServerIdParameter>]
    [-MonitoringContext]
    [-ResetTestAccountCredentials]
    [-TestType <OwaConnectivityTestType>]
    [-Timeout <UInt32>]
    [-TrustAnySSLCertificate]
    [-VirtualDirectoryName <String>]
    [-WhatIf]
    [<CommonParameters>]

Description

The Test-CalendarConnectivity cmdlet tests anonymous calendar sharing by connecting to a specified Outlook on the web virtual directory, to any Outlook on the web virtual directories on a specified Exchange server, or to any Outlook on the web virtual directories that are available in the local Active Directory site.

The first time you use this cmdlet, you might be required to create a test user. To create a test user, run the following command:

& $env:ExchangeInstallPath\Scripts\New-TestCasConnectivityUser.ps1

If the server hosting the test mailbox isn't available, the command returns an error that might not clearly identify the problem. To avoid this, use the Test-MapiConnectivity cmdlet to verify that the server that hosts the test mailbox is running and that the mailbox is available before you run this command.

The test results are displayed on-screen. The cmdlet returns the following information.

  • CasServer: The Exchange server that the client connected to.
  • LocalSite: The name of the local Active Directory site.
  • Scenario: The operations that are tested. Values are: Logon, CalendarICS and CalendarHTML.
  • Result: The values returned are typically Success, Skipped or Failure.
  • Latency(MS): The time required to complete the test in milliseconds.
  • Error: Any error messages that were encountered.

You can write the results to a file by piping the output to ConvertTo-Html and Set-Content. For example: Test-CalendarConnectivity -ClientAccessServer MBX01 | ConvertTo-Html | Set-Content -Path "C:\My Documents\Calendar Test.html".

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Test-CalendarConnectivity -ClientAccessServer MBX01

This example tests the anonymous calendar sharing for the server named MBX01.

Parameters

-ClientAccessServer

The ClientAccessServer parameter specifies the Exchange server to test. This server has the Client Access server role installed, and is responsible for accepting client connections.

You can use any value that uniquely identifies the server. For example:

  • Name
  • Distinguished name (DN)
  • ExchangeLegacyDN
  • GUID
Type:ServerIdParameter
Position:1
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-LightMode

This parameter isn't implemented for this diagnostic command. Using this parameter doesn't change the behavior of this command.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MailboxServer

The MailboxServer parameter specifies the Exchange Mailbox server that you want to test. This parameter identifies the backend server that accepts proxied connections from the frontend server where clients connect.

You can use any value that uniquely identifies the server. For example:

  • Name
  • Distinguished name (DN)
  • ExchangeLegacyDN
  • GUID

If you don't use this parameter, connections to all Mailbox servers in the local Active Directory site are tested.

Type:ServerIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MonitoringContext

The MonitoringContext switch includes the associated monitoring events and performance counters in the results. You don't need to specify a value with this switch.

Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager (SCOM).

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ResetTestAccountCredentials

The ResetTestAccountCredentials switch resets the password for the test account that's used to run this command. You don't need to specify a value with this switch.

The password for the test account is typically reset every seven days. Use this switch to force a password reset any time it's required for security reasons.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-TestType

The TestType parameter specifies whether the command tests internal or external URLs. Values are Internal and External. The default value is Internal.

Type:OwaConnectivityTestType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Timeout

This parameter isn't implemented for this diagnostic command. Using this parameter doesn't change the behavior of this command.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-TrustAnySSLCertificate

This parameter isn't implemented for this diagnostic command. Using this parameter doesn't change the behavior of this command.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-VirtualDirectoryName

The VirtualDirectoryName parameter specifies the name of the Outlook on the web virtual directory that you want to test. Enclose values that contain spaces in quotation marks (").

If you don't use this parameter, all available Outlook on the web virtual directories are tested.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.