Lazy<T> Constructeurs
Définition
Important
Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.
Initialise une nouvelle instance de la classe Lazy<T>.
Surcharges
| Lazy<T>() |
Initialise une nouvelle instance de la classe Lazy<T>. Lorsque l’initialisation tardive se produit, le constructeur sans paramètre du type cible est utilisé. |
| Lazy<T>(Boolean) |
Initialise une nouvelle instance de la classe Lazy<T>. Lorsque l’initialisation tardive se produit, le constructeur sans paramètre du type cible et le mode d’initialisation spécifié sont utilisés. |
| Lazy<T>(Func<T>) |
Initialise une nouvelle instance de la classe Lazy<T>. Quand l’initialisation tardive se produit, la fonction d’initialisation spécifiée est utilisée. |
| Lazy<T>(LazyThreadSafetyMode) |
Initialise une nouvelle instance de la classe Lazy<T> qui utilise le constructeur sans paramètre de |
| Lazy<T>(T) |
Initialise une nouvelle instance de la classe Lazy<T> qui utilise une valeur préinitialisée spécifiée. |
| Lazy<T>(Func<T>, Boolean) |
Initialise une nouvelle instance de la classe Lazy<T>. Quand l’initialisation tardive se produit, la fonction d’initialisation spécifiée et le mode d’initialisation sont utilisés. |
| Lazy<T>(Func<T>, LazyThreadSafetyMode) |
Initialise une nouvelle instance de la classe Lazy<T> qui utilise la fonction d’initialisation et le mode de cohérence de thread spécifiés. |
Lazy<T>()
- Source:
- Lazy.cs
- Source:
- Lazy.cs
- Source:
- Lazy.cs
Initialise une nouvelle instance de la classe Lazy<T>. Lorsque l’initialisation tardive se produit, le constructeur sans paramètre du type cible est utilisé.
public:
Lazy();public Lazy ();Public Sub New ()Exemples
L’exemple suivant illustre l’utilisation de ce constructeur. Il illustre également l’utilisation du Lazy<T>(Boolean) constructeur (en spécifiant true pour isThreadSafe) et du Lazy<T>(LazyThreadSafetyMode) constructeur (spécifiant LazyThreadSafetyMode.ExecutionAndPublication pour mode). Pour basculer vers un autre constructeur, modifiez simplement les constructeurs qui sont commentés.
L'exemple définit une classe LargeObject qui sera initialisée tardivement par l'un des nombreux threads. Les deux lignes clés de code de cet exemple sont la création de l’initialiseur et l’initialisation réelle. Au début de la méthode Main, l'exemple crée l'initialiseur de type lazy thread-safe pour LargeObject :
lazyLargeObject = new Lazy<LargeObject>();
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(true);
//lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication);
let lazyLargeObject = Lazy<LargeObject>()
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(true)
// let lazyLargeObject = Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication)
lazyLargeObject = New Lazy(Of LargeObject)()
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(True)
'lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.ExecutionAndPublication)
L’exemple crée et démarre trois threads qui bloquent un ManualResetEvent objet, afin que l’exemple puisse libérer les threads en même temps. La ThreadProc méthode utilisée par les trois threads appelle la Value propriété pour obtenir l’instance LargeObject :
LargeObject large = lazyLargeObject.Value;
let large = lazyLargeObject.Value
Dim large As LargeObject = lazyLargeObject.Value
La Lazy<T> classe fournit le verrouillage, de sorte qu’un seul thread est autorisé à créer l’instance LargeObject . L’exemple montre que les autres threads obtiennent tous la même instance.
Notes
Pour plus de simplicité, cet exemple utilise une instance globale de Lazy<T> et toutes les méthodes sont static (Shared en Visual Basic). Ce ne sont pas des exigences pour l’utilisation de l’initialisation tardive.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>();
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(true);
//lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject.");
Console.ReadLine();
// Create and start 3 threads, passing the same blocking event to all of them.
ManualResetEvent startingGate = new ManualResetEvent(false);
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start(startingGate);
}
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(100);
startingGate.Set();
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
// Wait for the signal.
ManualResetEvent waitForStart = (ManualResetEvent) state;
waitForStart.WaitOne();
LargeObject large = lazyLargeObject.Value;
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
}
class LargeObject
{
int initBy = 0;
public int InitializedBy { get { return initBy; } }
public LargeObject()
{
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was created on thread id {0}.", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject.
LargeObject was created on thread id 4.
Initialized by thread 4; last used by thread 3.
Initialized by thread 4; last used by thread 4.
Initialized by thread 4; last used by thread 5.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject() =
let initBy = Thread.CurrentThread.ManagedThreadId
do
printfn $"LargeObject was created on thread id {initBy}."
member val Data = Array.zeroCreate<int64> 100000000 with get
member _.InitializedBy = initBy
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject>()
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(true)
// let lazyLargeObject = Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication)
let threadProc (state: obj) =
// Wait for the signal.
let waitForStart = state :?> ManualResetEvent
waitForStart.WaitOne() |> ignore
let large = lazyLargeObject.Value
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"Initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}." )
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject."""
stdin.ReadLine() |> ignore
// Create and start 3 threads, passing the same blocking event to all of them.
let startingGate = new ManualResetEvent false
let threads = [| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start startingGate
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep 100
startingGate.Set() |> ignore
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject.
//
// LargeObject was created on thread id 4.
// Initialized by thread 4 last used by thread 3.
// Initialized by thread 4 last used by thread 4.
// Initialized by thread 4 last used by thread 5.
//
// Press Enter to end the program
Imports System.Threading
Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)()
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(True)
'lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.ExecutionAndPublication)
Console.WriteLine( _
vbCrLf & "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject.")
Console.ReadLine()
' Create and start 3 threads, passing the same blocking event to all of them.
Dim startingGate As New ManualResetEvent(False)
Dim threads() As Thread = { New Thread(AddressOf ThreadProc),
New Thread(AddressOf ThreadProc), New Thread(AddressOf ThreadProc) }
For Each t As Thread In threads
t.Start(startingGate)
Next t
' Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(100)
startingGate.Set()
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
' Wait for the signal.
Dim waitForStart As ManualResetEvent = CType(state, ManualResetEvent)
waitForStart.WaitOne()
Dim large As LargeObject = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
End Sub
End Class
Class LargeObject
Private initBy As Integer = 0
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Public Sub New()
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("LargeObject was created on thread id {0}.", initBy)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject.
'
'LargeObject was created on thread id 3.
'Initialized by thread 3; last used by thread 5.
'Initialized by thread 3; last used by thread 4.
'Initialized by thread 3; last used by thread 3.
'
'Press Enter to end the program
Remarques
Une instance créée avec ce constructeur peut être utilisée simultanément à partir de plusieurs threads.
Le mode de sécurité de thread d’une Lazy<T> instance qui est initialisée avec ce constructeur est LazyThreadSafetyMode.ExecutionAndPublication. Le mode de sécurité des threads décrit le comportement lorsque plusieurs threads tentent d’initialiser l’instance Lazy<T> .
Une Lazy<T> instance créée avec ce constructeur ne met pas en cache d’exceptions. Pour plus d'informations, consultez la classe Lazy<T> ou l'énumération System.Threading.LazyThreadSafetyMode .
Voir aussi
S’applique à
Lazy<T>(Boolean)
- Source:
- Lazy.cs
- Source:
- Lazy.cs
- Source:
- Lazy.cs
Initialise une nouvelle instance de la classe Lazy<T>. Lorsque l’initialisation tardive se produit, le constructeur sans paramètre du type cible et le mode d’initialisation spécifié sont utilisés.
public:
Lazy(bool isThreadSafe);public Lazy (bool isThreadSafe);new Lazy<'T> : bool -> Lazy<'T>Public Sub New (isThreadSafe As Boolean)Paramètres
- isThreadSafe
- Boolean
true pour rendre cette instance utilisable simultanément par plusieurs threads ; false pour rendre l’instance utilisable par un seul thread à la fois.
Exemples
L’exemple suivant illustre l’utilisation de ce constructeur pour créer un initialiseur paresseux qui n’est pas thread safe, pour les scénarios où tout accès à l’objet initialisé paresseuse se produit sur le même thread. Il illustre également l’utilisation du Lazy<T>(LazyThreadSafetyMode) constructeur (en spécifiant LazyThreadSafetyMode.None pour mode. Pour basculer vers un autre constructeur, modifiez simplement le constructeur qui est commenté.
Notes
Pour obtenir du code qui montre comment utiliser ce constructeur dans des scénarios multithread (en spécifiant true pour isThreadSafe), consultez l’exemple du Lazy<T>() constructeur.
L’exemple définit une LargeObject classe qui sera initialisée de manière paresseuse. Dans la Main méthode, l’exemple crée une Lazy<T> instance, puis met en pause. Lorsque vous appuyez sur la touche Entrée, l’exemple accède à la Value propriété de l’instance, ce qui provoque l’initialisation Lazy<T> . Le constructeur de la LargeObject classe affiche un message de console.
Notes
Pour plus de simplicité, cet exemple utilise une instance globale de Lazy<T> et toutes les méthodes sont static (Shared en Visual Basic). Ce ne sont pas des exigences pour l’utilisation de l’initialisation tardive.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(false);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.None);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject.");
Console.ReadLine();
LargeObject large = lazyLargeObject.Value;
large.Data[11] = 89;
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
}
class LargeObject
{
public LargeObject()
{
Console.WriteLine("LargeObject was created on thread id {0}.",
Thread.CurrentThread.ManagedThreadId);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject.
LargeObject was created on thread id 1.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject () =
do
printfn $"LargeObject was created on thread id {Thread.CurrentThread.ManagedThreadId}."
member val Data = Array.zeroCreate<int64> 100000000 with get
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject> false
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(LazyThreadSafetyMode.None)
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject."""
stdin.ReadLine() |> ignore
let large = lazyLargeObject.Value
large.Data[11] <- 89
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject.
//
// LargeObject was created on thread id 1.
//
// Press Enter to end the program
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(False)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.None);
Console.WriteLine( _
vbCrLf & "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject.")
Console.ReadLine()
Dim large As LargeObject = lazyLargeObject.Value
large.Data(11) = 89
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
End Class
Friend Class LargeObject
Public Sub New()
Console.WriteLine("LargeObject was created on thread id {0}.", _
Thread.CurrentThread.ManagedThreadId)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject.
'
'LargeObject was created on thread id 1.
'
'Press Enter to end the program
Remarques
Le mode de sécurité du thread d’une Lazy<T> instance qui est initialisée avec ce constructeur est LazyThreadSafetyMode.ExecutionAndPublication si isThreadSafe est true; sinon, le mode est LazyThreadSafetyMode.None. Le mode de sécurité des threads décrit le comportement lorsque plusieurs threads tentent d’initialiser l’instance Lazy<T> . Pour spécifier le LazyThreadSafetyMode.PublicationOnly mode, utilisez le Lazy<T>(Func<T>, LazyThreadSafetyMode) constructeur ou Lazy<T>(LazyThreadSafetyMode) .
Une Lazy<T> instance créée avec ce constructeur ne met pas en cache d’exceptions. Pour plus d'informations, consultez la classe Lazy<T> ou l'énumération System.Threading.LazyThreadSafetyMode .
Voir aussi
S’applique à
Lazy<T>(Func<T>)
- Source:
- Lazy.cs
- Source:
- Lazy.cs
- Source:
- Lazy.cs
Initialise une nouvelle instance de la classe Lazy<T>. Quand l’initialisation tardive se produit, la fonction d’initialisation spécifiée est utilisée.
public:
Lazy(Func<T> ^ valueFactory);public Lazy (Func<T> valueFactory);new Lazy<'T> : Func<'T> -> Lazy<'T>Public Sub New (valueFactory As Func(Of T))Paramètres
- valueFactory
- Func<T>
Délégué qui est appelé pour produire la valeur initialisée tardivement si nécessaire.
Exceptions
valueFactory a la valeur null.
Exemples
L’exemple suivant illustre l’utilisation de ce constructeur pour fournir une initialisation différée avec mise en cache d’exceptions. Il illustre également l’utilisation du Lazy<T>(Func<T>, Boolean) constructeur (en spécifiant true pour isThreadSafe) et du Lazy<T>(Func<T>, LazyThreadSafetyMode) constructeur (spécifiant LazyThreadSafetyMode.ExecutionAndPublication pour mode). Pour basculer vers un autre constructeur, modifiez simplement les constructeurs qui sont commentés.
L'exemple définit une classe LargeObject qui sera initialisée tardivement par l'un des nombreux threads. Les trois sections clés du code illustrent la création de l’initialiseur, l’initialisation réelle et le constructeur de la classe, ce qui illustre la LargeObject mise en cache des exceptions. Au début de la méthode Main, l'exemple crée l'initialiseur de type lazy thread-safe pour LargeObject :
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, true);
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication);
let lazyLargeObject = Lazy<LargeObject> initLargeObject
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, true)
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, True)
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
L’exemple crée et démarre trois threads. La ThreadProc méthode utilisée par les trois threads appelle la Value propriété pour obtenir l’instance LargeObject :
try
{
LargeObject large = lazyLargeObject.Value;
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
try
let large = lazyLargeObject.Value
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"Initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
Try
Dim large As LargeObject = lazyLargeObject.Value
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
Dans le constructeur de la LargeObject classe, la troisième section clé du code lève une exception lors de la première création d’une LargeObject instance, mais autorise ensuite la création d’instance :
static int instanceCount = 0;
public LargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException("Throw only ONCE.");
}
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was created on thread id {0}.", initBy);
}
type LargeObject() =
static let mutable instanceCount = 0
let initBy = Thread.CurrentThread.ManagedThreadId
do
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {initBy}."
Private Shared instanceCount As Integer = 0
Public Sub New()
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException("Throw only ONCE.")
End If
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("LargeObject was created on thread id {0}.", initBy)
End Sub
Lorsque l’exemple est exécuté, le premier thread qui tente de créer une instance de LargeObject échoue et l’exception est interceptée. Vous pouvez vous attendre à ce que le thread suivant crée correctement une instance, mais l’objet Lazy<T> a mis en cache l’exception. Pour cette raison, les trois threads lèvent l’exception.
Notes
Pour plus de simplicité, cet exemple utilise une instance globale de Lazy<T> et toutes les méthodes sont static (Shared en Visual Basic). Ce ne sont pas des exigences pour l’utilisation de l’initialisation tardive.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static LargeObject InitLargeObject()
{
return new LargeObject();
}
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, true);
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject.");
Console.ReadLine();
// Create and start 3 threads, each of which tries to use LargeObject.
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start();
}
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
try
{
LargeObject large = lazyLargeObject.Value;
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
}
}
class LargeObject
{
int initBy = 0;
public int InitializedBy { get { return initBy; } }
static int instanceCount = 0;
public LargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException("Throw only ONCE.");
}
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was created on thread id {0}.", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject.
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject() =
static let mutable instanceCount = 0
let initBy = Thread.CurrentThread.ManagedThreadId
do
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {initBy}."
member _.InitializedBy = initBy
member val Data = Array.zeroCreate<int64> 100000000
let initLargeObject () =
LargeObject()
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject> initLargeObject
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, true)
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
let threadProc _ =
try
let large = lazyLargeObject.Value
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"Initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject."""
stdin.ReadLine () |> ignore
// Create and start 3 threads, each of which tries to use LargeObject.
let threads =
[| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start()
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject.
//
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
//
// Press Enter to end the program
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Private Shared Function InitLargeObject() As LargeObject
Return New LargeObject()
End Function
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, True)
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
Console.WriteLine(vbCrLf _
& "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject.")
Console.ReadLine()
' Create and start 3 threads, each of which tries to use LargeObject.
Dim threads() As Thread = { New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc), New Thread(AddressOf ThreadProc) }
For Each t As Thread In threads
t.Start()
Next t
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
Try
Dim large As LargeObject = lazyLargeObject.Value
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
End Sub
End Class
Friend Class LargeObject
Private initBy As Integer = 0
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Private Shared instanceCount As Integer = 0
Public Sub New()
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException("Throw only ONCE.")
End If
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("LargeObject was created on thread id {0}.", initBy)
End Sub
Public Data(99999999) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject.
'
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'
'Press Enter to end the program
'
Remarques
Une instance créée avec ce constructeur peut être utilisée simultanément à partir de plusieurs threads.
Le mode de sécurité de thread d’une Lazy<T> instance qui est initialisée avec ce constructeur est LazyThreadSafetyMode.ExecutionAndPublication. Le mode de sécurité des threads décrit le comportement lorsque plusieurs threads tentent d’initialiser l’instance Lazy<T> .
Les exceptions levées par valueFactory sont mises en cache. Pour plus d'informations, consultez la classe Lazy<T> ou l'énumération System.Threading.LazyThreadSafetyMode .
Voir aussi
S’applique à
Lazy<T>(LazyThreadSafetyMode)
- Source:
- Lazy.cs
- Source:
- Lazy.cs
- Source:
- Lazy.cs
Initialise une nouvelle instance de la classe Lazy<T> qui utilise le constructeur sans paramètre de T et le mode de cohérence de thread spécifié.
public:
Lazy(System::Threading::LazyThreadSafetyMode mode);public Lazy (System.Threading.LazyThreadSafetyMode mode);new Lazy<'T> : System.Threading.LazyThreadSafetyMode -> Lazy<'T>Public Sub New (mode As LazyThreadSafetyMode)Paramètres
- mode
- LazyThreadSafetyMode
Une des valeurs d’énumération qui spécifie le mode de cohérence de thread.
Exceptions
mode contient une valeur non valide.
Exemples
L’exemple suivant illustre l’utilisation de ce constructeur pour créer un initialiseur paresseux qui permet à plusieurs threads de courir pour créer un objet paresseusement. Plusieurs threads peuvent réussir à créer des instances, mais tous les threads utilisent l’instance créée en premier.
Notes
Pour obtenir un exemple qui montre comment utiliser ce constructeur dans des scénarios à thread unique (en spécifiant LazyThreadSafetyMode.None pour mode), consultez le Lazy<T>(Boolean) constructeur. Pour obtenir un exemple qui montre comment utiliser ce constructeur pour fournir un verrouillage plutôt que des conditions de course dans des scénarios multithread (en spécifiant LazyThreadSafetyMode.ExecutionAndPublication pour mode), consultez le Lazy<T>() constructeur.
L’exemple définit une LargeObject classe qui sera initialisée paresseusement par l’un des threads. Les trois sections clés du code illustrent la création de l’initialiseur, l’initialisation réelle, ainsi que le constructeur et le finaliseur de la LargeObject classe. Au début de la Main méthode, l’exemple crée l’objet qui effectue une Lazy<T> initialisation différée de :LargeObject
lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.PublicationOnly);
let lazyLargeObject = Lazy<LargeObject> LazyThreadSafetyMode.PublicationOnly
lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.PublicationOnly)
L’exemple crée et démarre trois threads qui bloquent un ManualResetEvent objet, afin que l’exemple puisse libérer les threads en même temps. Dans la ThreadProc méthode utilisée par les trois threads, l’appel de la Value propriété crée l’instance LargeObject :
LargeObject large = lazyLargeObject.Value;
let large = lazyLargeObject.Value
Dim large As LargeObject = lazyLargeObject.Value
Étant donné que le constructeur pour l’instance Lazy<T> spécifiée LazyThreadSafetyMode.PublicationOnly, les trois threads sont autorisés à créer LargeObject des instances. L’exemple le montre en affichant des messages de console dans le constructeur et dans le finaliseur de la LargeObject classe :
public LargeObject()
{
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
type LargeObject() =
let initBy = Thread.CurrentThread.ManagedThreadId
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
Public Sub New()
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Toutefois, l’objet Lazy<T> garantit qu’une seule instance est utilisée par tous les threads. La sortie de l’exemple montre que les trois threads utilisent la même instance et indique également que les deux autres instances peuvent être récupérées par garbage collection.
Notes
Pour plus de simplicité, cet exemple utilise une instance globale de Lazy<T> et toutes les méthodes sont static (Shared en Visual Basic). Ce ne sont pas des exigences pour l’utilisation de l’initialisation tardive.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.PublicationOnly);
// Create and start 3 threads, passing the same blocking event to all of them.
ManualResetEvent startingGate = new ManualResetEvent(false);
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start(startingGate);
}
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50);
startingGate.Set();
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine(
"\r\nThreads are complete. Running GC.Collect() to reclaim the extra instances.");
GC.Collect();
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100);
Console.WriteLine(
"\r\nNote that all three threads used the instance that was not collected.");
Console.WriteLine("Press Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
// Wait for the signal.
ManualResetEvent waitForStart = (ManualResetEvent) state;
waitForStart.WaitOne();
LargeObject large = lazyLargeObject.Value;
// The following line introduces an artificial delay, to exaggerate the race
// condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
}
class LargeObject
{
int initBy = -1;
public int InitializedBy { get { return initBy; } }
public LargeObject()
{
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
Constructor: Instance initializing on thread 4
Constructor: Instance initializing on thread 3
Constructor: Instance initializing on thread 5
LargeObject was initialized by thread 4; last used by thread 4.
LargeObject was initialized by thread 4; last used by thread 5.
LargeObject was initialized by thread 4; last used by thread 3.
Threads are complete. Running GC.Collect() to reclaim the extra instances.
Finalizer: Instance was initialized on 3
Finalizer: Instance was initialized on 5
Note that all three threads used the instance that was not collected.
Press Enter to end the program
Instance finalizing; initialized on 4
*/
open System
open System.Threading
type LargeObject() =
let initBy = Thread.CurrentThread.ManagedThreadId
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
member _.InitializedBy = initBy
member val Data = Array.zeroCreate<int64> 100000000
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject> LazyThreadSafetyMode.PublicationOnly
let threadProc (state: obj) =
// Wait for the signal.
let waitForStart = state :?> ManualResetEvent
waitForStart.WaitOne() |> ignore
let large = lazyLargeObject.Value
// The following line introduces an artificial delay, to exaggerate the race
// condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"LargeObject was initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
// Create and start 3 threads, passing the same blocking event to all of them.
let startingGate = new ManualResetEvent false
let threads =
[| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start startingGate
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep 50
startingGate.Set() |> ignore
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nThreads are complete. Running GC.Collect() to reclaim the extra instances."
GC.Collect()
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep 100
printfn "\nNote that all three threads used the instance that was not collected."
printfn "Press Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// Constructor: Instance initializing on thread 4
// Constructor: Instance initializing on thread 3
// Constructor: Instance initializing on thread 5
// LargeObject was initialized by thread 4 last used by thread 4.
// LargeObject was initialized by thread 4 last used by thread 5.
// LargeObject was initialized by thread 4 last used by thread 3.
//
// Threads are complete. Running GC.Collect() to reclaim the extra instances.
// Finalizer: Instance was initialized on 3
// Finalizer: Instance was initialized on 5
//
// Note that all three threads used the instance that was not collected.
// Press Enter to end the program
//
// Instance finalizing initialized on 4
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.PublicationOnly)
' Create and start 3 threads, passing the same blocking event to all of them.
Dim startingGate As New ManualResetEvent(False)
Dim threads() As Thread = { _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc) _
}
For Each t As Thread In threads
t.Start(startingGate)
Next t
' Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50)
startingGate.Set()
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & _
"Threads are complete. Running GC.Collect() to reclaim the extra instances.")
GC.Collect()
' Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100)
Console.WriteLine(vbCrLf & _
"Note that all three threads used the instance that was not collected.")
Console.WriteLine("Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
' Wait for the signal.
Dim waitForStart As ManualResetEvent = CType(state, ManualResetEvent)
waitForStart.WaitOne()
Dim large As LargeObject = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine( _
"LargeObject was initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
End Sub
End Class
Friend Class LargeObject
Private initBy As Integer = -1
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Public Sub New()
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'Constructor: Instance initializing on thread 3
'Constructor: Instance initializing on thread 5
'Constructor: Instance initializing on thread 4
'LargeObject was initialized by thread 3; last used by thread 4.
'LargeObject was initialized by thread 3; last used by thread 3.
'LargeObject was initialized by thread 3; last used by thread 5.
'
'Threads are complete. Running GC.Collect() to reclaim the extra instances.
'Finalizer: Instance was initialized on 5
'Finalizer: Instance was initialized on 4
'
'Note that all three threads used the instance that was not collected.
'Press Enter to end the program
'
'Finalizer: Instance was initialized on 3
'
Remarques
Le mode de sécurité des threads d’une Lazy<T> instance décrit le comportement lorsque plusieurs threads tentent d’initialiser l’instance Lazy<T> .
Une Lazy<T> instance créée avec ce constructeur ne met pas en cache d’exceptions. Pour plus d'informations, consultez la classe Lazy<T> ou l'énumération System.Threading.LazyThreadSafetyMode .
Voir aussi
S’applique à
Lazy<T>(T)
- Source:
- Lazy.cs
- Source:
- Lazy.cs
- Source:
- Lazy.cs
Initialise une nouvelle instance de la classe Lazy<T> qui utilise une valeur préinitialisée spécifiée.
public:
Lazy(T value);public Lazy (T value);new Lazy<'T> : 'T -> Lazy<'T>Public Sub New (value As T)Paramètres
- value
- T
Valeur préinitialisée à utiliser.
Remarques
Une instance créée avec ce constructeur est utilisable simultanément par plusieurs threads.
S’applique à
Lazy<T>(Func<T>, Boolean)
- Source:
- Lazy.cs
- Source:
- Lazy.cs
- Source:
- Lazy.cs
Initialise une nouvelle instance de la classe Lazy<T>. Quand l’initialisation tardive se produit, la fonction d’initialisation spécifiée et le mode d’initialisation sont utilisés.
public:
Lazy(Func<T> ^ valueFactory, bool isThreadSafe);public Lazy (Func<T> valueFactory, bool isThreadSafe);new Lazy<'T> : Func<'T> * bool -> Lazy<'T>Public Sub New (valueFactory As Func(Of T), isThreadSafe As Boolean)Paramètres
- valueFactory
- Func<T>
Délégué qui est appelé pour produire la valeur initialisée tardivement si nécessaire.
- isThreadSafe
- Boolean
true pour que cette instance puisse être utilisée simultanément par plusieurs threads ; false pour que l’instance ne puisse être utilisée que par un thread à la fois.
Exceptions
valueFactory a la valeur null.
Exemples
L’exemple suivant illustre l’utilisation de ce constructeur pour fournir une initialisation différée avec mise en cache d’exceptions, dans un scénario avec un thread unique. Il illustre également l’utilisation du Lazy<T> constructeur (en spécifiant LazyThreadSafetyMode.None pour mode). Pour basculer vers ce constructeur, modifiez simplement le constructeur qui est commenté.
Notes
Pour obtenir du code qui montre comment utiliser ce constructeur dans des scénarios multithread (en spécifiant true pour isThreadSafe), consultez l’exemple du Lazy<T>(Func<T>) constructeur.
L'exemple définit une classe LargeObject qui sera initialisée tardivement par l'un des nombreux threads. Les trois sections clés du code illustrent la création de l’initialiseur, l’initialisation réelle et le constructeur de la classe, ce qui illustre la LargeObject mise en cache des exceptions. Au début de la méthode Main, l'exemple crée l'initialiseur de type lazy thread-safe pour LargeObject :
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, false);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.None);
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, false)
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.None)
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, False)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.None)
Dans l’appel au constructeur, le isThreadSafe paramètre est false, de sorte que le Lazy<T> n’est pas thread safe. Étant donné qu’il n’est pas thread safe, l’exemple appelle la Value propriété trois fois sur le même thread :
for (int i = 0; i < 3; i++)
{
try
{
LargeObject large = lazyLargeObject.Value;
large.Data[11] = 89;
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
}
for _ = 0 to 2 do
try
let large = lazyLargeObject.Value
large.Data[11] <- 89
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
For i As Integer = 0 To 2
Try
Dim large As LargeObject = lazyLargeObject.Value
large.Data(11) = 89
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
Next i
Dans le constructeur de la LargeObject classe, la troisième section clé du code lève une exception lors de la première création d’une LargeObject instance, mais autorise ensuite la création d’instance :
static bool pleaseThrow = true;
public LargeObject()
{
if (pleaseThrow)
{
pleaseThrow = false;
throw new ApplicationException("Throw only ONCE.");
}
Console.WriteLine("LargeObject was created on thread id {0}.",
Thread.CurrentThread.ManagedThreadId);
}
type LargeObject() =
static let mutable pleaseThrow = true
do
if pleaseThrow then
pleaseThrow <- false
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {Thread.CurrentThread.ManagedThreadId}."
Private Shared pleaseThrow As Boolean = True
Public Sub New()
If pleaseThrow Then
pleaseThrow = False
Throw New ApplicationException("Throw only ONCE.")
End If
Console.WriteLine("LargeObject was created on thread id {0}.", _
Thread.CurrentThread.ManagedThreadId)
End Sub
Lorsque l’exemple est exécuté, la première tentative de création d’une instance de LargeObject échoue et l’exception est interceptée. Vous pouvez vous attendre à ce que la prochaine tentative réussisse, mais l’objet Lazy<T> a mis en cache l’exception. Pour cette raison, les trois tentatives lèvent l’exception.
Notes
Pour plus de simplicité, cet exemple utilise une instance globale de Lazy<T> et toutes les méthodes sont static (Shared en Visual Basic). Ce ne sont pas des exigences pour l’utilisation de l’initialisation tardive.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static LargeObject InitLargeObject()
{
return new LargeObject();
}
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, false);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.None);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject (three tries).");
Console.ReadLine();
for (int i = 0; i < 3; i++)
{
try
{
LargeObject large = lazyLargeObject.Value;
large.Data[11] = 89;
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
}
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
}
class LargeObject
{
static bool pleaseThrow = true;
public LargeObject()
{
if (pleaseThrow)
{
pleaseThrow = false;
throw new ApplicationException("Throw only ONCE.");
}
Console.WriteLine("LargeObject was created on thread id {0}.",
Thread.CurrentThread.ManagedThreadId);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject (three tries).
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject() =
static let mutable pleaseThrow = true
do
if pleaseThrow then
pleaseThrow <- false
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {Thread.CurrentThread.ManagedThreadId}."
member val Data = Array.zeroCreate<int64> 100000000
let initLargeObject () =
LargeObject()
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, false)
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.None)
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject (three tries)."""
stdin.ReadLine() |> ignore
for _ = 0 to 2 do
try
let large = lazyLargeObject.Value
large.Data[11] <- 89
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject (three tries).
//
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
//
// Press Enter to end the program
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Private Shared Function InitLargeObject() As LargeObject
Return New LargeObject()
End Function
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, False)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.None)
Console.WriteLine(vbCrLf _
& "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject (three tries).")
Console.ReadLine()
For i As Integer = 0 To 2
Try
Dim large As LargeObject = lazyLargeObject.Value
large.Data(11) = 89
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
Next i
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
End Class
Friend Class LargeObject
Private Shared pleaseThrow As Boolean = True
Public Sub New()
If pleaseThrow Then
pleaseThrow = False
Throw New ApplicationException("Throw only ONCE.")
End If
Console.WriteLine("LargeObject was created on thread id {0}.", _
Thread.CurrentThread.ManagedThreadId)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject (three tries).
'
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'
'Press Enter to end the program
'
Remarques
Le mode de sécurité du thread d’une Lazy<T> instance qui est initialisée avec ce constructeur est LazyThreadSafetyMode.ExecutionAndPublication si isThreadSafe est true; sinon, le mode est LazyThreadSafetyMode.None. Le mode de sécurité des threads décrit le comportement lorsque plusieurs threads tentent d’initialiser l’instance Lazy<T> .
Pour spécifier le LazyThreadSafetyMode.PublicationOnly mode, utilisez le Lazy<T>(Func<T>, LazyThreadSafetyMode) constructeur ou Lazy<T>(LazyThreadSafetyMode) .
Les exceptions levées par valueFactory sont mises en cache. Pour plus d'informations, consultez la classe Lazy<T> ou l'énumération System.Threading.LazyThreadSafetyMode .
Voir aussi
S’applique à
Lazy<T>(Func<T>, LazyThreadSafetyMode)
- Source:
- Lazy.cs
- Source:
- Lazy.cs
- Source:
- Lazy.cs
Initialise une nouvelle instance de la classe Lazy<T> qui utilise la fonction d’initialisation et le mode de cohérence de thread spécifiés.
public:
Lazy(Func<T> ^ valueFactory, System::Threading::LazyThreadSafetyMode mode);public Lazy (Func<T> valueFactory, System.Threading.LazyThreadSafetyMode mode);new Lazy<'T> : Func<'T> * System.Threading.LazyThreadSafetyMode -> Lazy<'T>Public Sub New (valueFactory As Func(Of T), mode As LazyThreadSafetyMode)Paramètres
- valueFactory
- Func<T>
Délégué qui est appelé pour produire la valeur initialisée tardivement si nécessaire.
- mode
- LazyThreadSafetyMode
Une des valeurs d’énumération qui spécifie le mode de cohérence de thread.
Exceptions
mode contient une valeur non valide.
valueFactory a la valeur null.
Exemples
L’exemple suivant illustre l’utilisation de ce constructeur pour créer un initialiseur paresseux qui permet à plusieurs threads de courir pour créer un objet paresseusement. Plusieurs threads peuvent réussir à créer des instances, mais tous les threads utilisent l’instance créée en premier. En outre, l’exemple montre que les exceptions ne sont jamais mises en cache lorsque vous spécifiez LazyThreadSafetyMode.PublicationOnly, même si l’initialisation est effectuée par une fonction plutôt que par le constructeur sans paramètre du type créé paresseusement.
Notes
Pour obtenir un exemple qui montre comment utiliser ce constructeur dans des scénarios à thread unique (en spécifiant LazyThreadSafetyMode.None pour mode), consultez le Lazy<T>(Boolean) constructeur. Pour obtenir un exemple qui montre comment utiliser ce constructeur pour fournir un verrouillage plutôt que des conditions de course dans des scénarios multithread (en spécifiant LazyThreadSafetyMode.ExecutionAndPublication pour mode), consultez le Lazy<T>() constructeur.
L’exemple définit une LargeObject classe qui sera initialisée paresseusement par l’un des threads. Les quatre sections clés du code illustrent la création de l’initialiseur, l’initialisation réelle, la fonction d’initialisation et le constructeur et le finaliseur de la LargeObject classe. Au début de la Main méthode, l’exemple crée l’objet qui effectue une Lazy<T> initialisation différée de :LargeObject
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject,
LazyThreadSafetyMode.PublicationOnly);
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.PublicationOnly)
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, _
LazyThreadSafetyMode.PublicationOnly)
L’initialiseur paresseux utilise une fonction pour effectuer l’initialisation. Dans ce cas, une fonction est requise, car il n’existe aucun constructeur sans paramètre pour la LargeObject classe .
L’exemple crée et démarre trois threads qui bloquent un ManualResetEvent objet, afin que l’exemple puisse libérer les threads en même temps. Dans la ThreadProc méthode utilisée par les trois threads, l’appel de la Value propriété crée l’instance LargeObject :
LargeObject large = null;
try
{
large = lazyLargeObject.Value;
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException ex)
{
Console.WriteLine("ApplicationException: {0}", ex.Message);
}
try
let large = lazyLargeObject.Value
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"LargeObject was initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as ex ->
printfn $"ApplicationException: {ex.Message}"
Dim large As LargeObject = Nothing
Try
large = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine( _
"LargeObject was initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch ex As ApplicationException
Console.WriteLine("ApplicationException: {0}", ex.Message)
End Try
Dans la troisième section clé du code, la fonction d’initialisation différée est appelée pour créer l’instance LargeObject . La fonction lève une exception la première fois qu’elle est appelée :
static int instanceCount = 0;
static LargeObject InitLargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException(
String.Format("Lazy initialization function failed on thread {0}.",
Thread.CurrentThread.ManagedThreadId));
}
return new LargeObject(Thread.CurrentThread.ManagedThreadId);
}
let mutable instanceCount = 0
let initLargeObject () =
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException $"Lazy initialization function failed on thread {Thread.CurrentThread.ManagedThreadId}.")
LargeObject Thread.CurrentThread.ManagedThreadId
Private Shared instanceCount As Integer = 0
Private Shared Function InitLargeObject() As LargeObject
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException( _
"Lazy initialization function failed on thread " & _
Thread.CurrentThread.ManagedThreadId & ".")
End If
Return New LargeObject(Thread.CurrentThread.ManagedThreadId)
End Function
Avec tout autre LazyThreadSafetyMode paramètre, une exception non prise en charge dans la fonction d’initialisation est mise en cache. Toutefois, LazyThreadSafetyMode.PublicationOnly supprime la mise en cache des exceptions. La sortie de l’exemple montre qu’une tentative d’initialisation ultérieure de l’objet réussit.
Notes
Le message d’exception s’affiche généralement après les messages indiquant que d’autres threads ont correctement initialisé l’objet. Cela est dû au délai introduit par la levée et l’interception de l’exception.
Étant donné que le constructeur pour l’instance Lazy<T> spécifiée LazyThreadSafetyMode.PublicationOnly, les trois threads sont autorisés à créer LargeObject des instances. L’exemple le montre en affichant des messages de console dans le constructeur et dans le finaliseur de la LargeObject classe :
public LargeObject(int initializedBy)
{
initBy = initializedBy;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
type LargeObject(initBy) =
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
Public Sub New(ByVal initializedBy As Integer)
initBy = initializedBy
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
L’objet Lazy<T> garantit qu’une seule instance est utilisée par tous les threads (à l’exception du thread où la fonction d’initialisation lève une exception). La sortie de l’exemple le montre.
Notes
Pour plus de simplicité, cet exemple utilise une instance globale de Lazy<T> et toutes les méthodes sont static (Shared en Visual Basic). Ce ne sont pas des exigences pour l’utilisation de l’initialisation tardive.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
// Factory function for lazy initialization.
static int instanceCount = 0;
static LargeObject InitLargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException(
String.Format("Lazy initialization function failed on thread {0}.",
Thread.CurrentThread.ManagedThreadId));
}
return new LargeObject(Thread.CurrentThread.ManagedThreadId);
}
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject,
LazyThreadSafetyMode.PublicationOnly);
// Create and start 3 threads, passing the same blocking event to all of them.
ManualResetEvent startingGate = new ManualResetEvent(false);
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start(startingGate);
}
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50);
startingGate.Set();
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine(
"\r\nThreads are complete. Running GC.Collect() to reclaim extra instances.");
GC.Collect();
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100);
Console.WriteLine("\r\nNote that only one instance of LargeObject was used.");
Console.WriteLine("Press Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
// Wait for the signal.
ManualResetEvent waitForStart = (ManualResetEvent) state;
waitForStart.WaitOne();
LargeObject large = null;
try
{
large = lazyLargeObject.Value;
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException ex)
{
Console.WriteLine("ApplicationException: {0}", ex.Message);
}
}
}
class LargeObject
{
int initBy = -1;
public int InitializedBy { get { return initBy; } }
public LargeObject(int initializedBy)
{
initBy = initializedBy;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
Constructor: Instance initializing on thread 5
Constructor: Instance initializing on thread 4
ApplicationException: Lazy initialization function failed on thread 3.
LargeObject was initialized by thread 5; last used by thread 5.
LargeObject was initialized by thread 5; last used by thread 4.
Threads are complete. Running GC.Collect() to reclaim extra instances.
Finalizer: Instance was initialized on 4
Note that only one instance of LargeObject was used.
Press Enter to end the program
Finalizer: Instance was initialized on 5
*/
open System
open System.Threading
type LargeObject(initBy) =
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
member _.InitializedBy = initBy
member val Data = Array.zeroCreate<int64> 100000000 with get
// Factory function for lazy initialization.
let mutable instanceCount = 0
let initLargeObject () =
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException $"Lazy initialization function failed on thread {Thread.CurrentThread.ManagedThreadId}.")
LargeObject Thread.CurrentThread.ManagedThreadId
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.PublicationOnly)
let threadProc (state: obj) =
// Wait for the signal.
let waitForStart = state :?> ManualResetEvent
waitForStart.WaitOne() |> ignore
try
let large = lazyLargeObject.Value
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"LargeObject was initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as ex ->
printfn $"ApplicationException: {ex.Message}"
// Create and start 3 threads, passing the same blocking event to all of them.
let startingGate = new ManualResetEvent false
let threads =
[| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start startingGate
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep 50
startingGate.Set() |> ignore
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nThreads are complete. Running GC.Collect() to reclaim extra instances."
GC.Collect()
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep 100
printfn "\nNote that only one instance of LargeObject was used."
printfn "Press Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// Constructor: Instance initializing on thread 5
// Constructor: Instance initializing on thread 4
// ApplicationException: Lazy initialization function failed on thread 3.
// LargeObject was initialized by thread 5 last used by thread 5.
// LargeObject was initialized by thread 5 last used by thread 4.
//
// Threads are complete. Running GC.Collect() to reclaim extra instances.
// Finalizer: Instance was initialized on 4
//
// Note that only one instance of LargeObject was used.
// Press Enter to end the program
//
// Finalizer: Instance was initialized on 5
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
' Factory function for lazy initialization.
Private Shared instanceCount As Integer = 0
Private Shared Function InitLargeObject() As LargeObject
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException( _
"Lazy initialization function failed on thread " & _
Thread.CurrentThread.ManagedThreadId & ".")
End If
Return New LargeObject(Thread.CurrentThread.ManagedThreadId)
End Function
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, _
LazyThreadSafetyMode.PublicationOnly)
' Create and start 3 threads, passing the same blocking event to all of them.
Dim startingGate As New ManualResetEvent(False)
Dim threads() As Thread = { _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc) _
}
For Each t As Thread In threads
t.Start(startingGate)
Next t
' Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50)
startingGate.Set()
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & _
"Threads are complete. Running GC.Collect() to reclaim extra instances.")
GC.Collect()
' Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100)
Console.WriteLine(vbCrLf & "Note that only one instance of LargeObject was used.")
Console.WriteLine("Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
' Wait for the signal.
Dim waitForStart As ManualResetEvent = CType(state, ManualResetEvent)
waitForStart.WaitOne()
Dim large As LargeObject = Nothing
Try
large = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine( _
"LargeObject was initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch ex As ApplicationException
Console.WriteLine("ApplicationException: {0}", ex.Message)
End Try
End Sub
End Class
Friend Class LargeObject
Private initBy As Integer = -1
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Public Sub New(ByVal initializedBy As Integer)
initBy = initializedBy
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Public Data(99999999) As Long
End Class
' This example produces output similar to the following:
'
'Constructor: Instance initializing on thread 4
'ApplicationException: Lazy initialization function failed on thread 3.
'Constructor: Instance initializing on thread 5
'LargeObject was initialized by thread 4; last used by thread 4.
'LargeObject was initialized by thread 4; last used by thread 5.
'
'Threads are complete. Running GC.Collect() to reclaim extra instances.
'Finalizer: Instance was initialized on 5
'
'Note that only one instance of LargeObject was used.
'Press Enter to end the program
'
'Finalizer: Instance was initialized on 4
'
Remarques
Le mode de sécurité des threads d’une Lazy<T> instance décrit le comportement lorsque plusieurs threads tentent d’initialiser l’instance Lazy<T> .
Les exceptions levées par valueFactory sont mises en cache, sauf si mode est LazyThreadSafetyMode.PublicationOnly. Pour plus d'informations, consultez la classe Lazy<T> ou l'énumération System.Threading.LazyThreadSafetyMode .
Voir aussi
S’applique à
Commentaires
Bientôt disponible : Tout au long de 2024, nous allons supprimer progressivement GitHub Issues comme mécanisme de commentaires pour le contenu et le remplacer par un nouveau système de commentaires. Pour plus d’informations, consultez https://aka.ms/ContentUserFeedback.
Envoyer et afficher des commentaires pour