CustomAttributeData.GetCustomAttributes Méthode
Important
Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.
Retourne une liste d'objets CustomAttributeData représentant des données relatives aux attributs qui ont été appliqués à la cible.
| GetCustomAttributes(Assembly) |
Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués à l’assembly cible. |
| GetCustomAttributes(MemberInfo) |
Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au membre cible. |
| GetCustomAttributes(Module) |
Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au module cible. |
| GetCustomAttributes(ParameterInfo) |
Retourne une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au paramètre cible. |
- Source:
- CustomAttributeData.cs
- Source:
- CustomAttributeData.cs
- Source:
- CustomAttributeData.cs
Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués à l’assembly cible.
public:
static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Assembly ^ target);C#
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.Assembly target);static member GetCustomAttributes : System.Reflection.Assembly -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>Public Shared Function GetCustomAttributes (target As Assembly) As IList(Of CustomAttributeData)Paramètres
- target
- Assembly
L’assembly dont les données d’attribut personnalisé doivent être récupérées.
Retours
Liste d’objets représentant des données sur les attributs qui ont été appliqués à l’assembly cible.
Exceptions
target a la valeur null.
Exemples
L’exemple suivant définit un attribut personnalisé avec quatre constructeurs et quatre propriétés. Deux des propriétés sont en lecture seule et sont définies à l’aide des paramètres positionnels des constructeurs. Les deux autres propriétés sont en lecture/écriture et peuvent être définies uniquement à l’aide d’arguments nommés. Une propriété positionnelle est un tableau de chaînes, et une propriété nommée est un tableau d’entiers.
L’attribut est appliqué à l’assembly, à un type déclaré dans l’assembly, à une méthode du type, et à un paramètre de la méthode. Différents constructeurs sont utilisés pour ces cas. Lorsqu’il est exécuté, l’assembly se charge lui-même dans le contexte de réflexion uniquement et affiche les attributs personnalisés.
L’attribut appliqué au type illustre les propriétés du tableau, avec des arguments positionnels et nommés.
La GetCustomAttributes méthode est utilisée dans Main() pour obtenir les attributs personnalisés appliqués à l’assembly. La valeur de retour de la méthode est passée à la ShowAttributeData méthode .
using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;
// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
FirstKind, SecondKind, ThirdKind, FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
// Data for properties.
ExampleKind kindValue;
String^ noteValue;
array<String^>^ arrayStrings;
array<int>^ arrayNumbers;
// Constructors.
void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
{
kindValue = initKind;
arrayStrings = initStrings;
}
public:
ExampleAttribute()
{
ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
}
ExampleAttribute( ExampleKind initKind )
{
ExampleAttributeInitialize( initKind, nullptr );
}
ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
{
ExampleAttributeInitialize( initKind, initStrings );
}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
property ExampleKind Kind
{
ExampleKind get()
{
return kindValue;
}
}
property array<String^>^ Strings
{
array<String^>^ get()
{
return arrayStrings;
}
}
property String^ Note
{
String^ get()
{
return noteValue;
}
void set( String^ value )
{
noteValue = value;
}
}
property array<int>^ Numbers
{
array<int>^ get()
{
return arrayNumbers;
}
void set( array<int>^ value )
{
arrayNumbers = value;
}
}
};
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];
// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind,
gcnew array<String^> { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = gcnew array<int> { 53, 57, 59 })]
public ref class Test
{
public:
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
void TestMethod( [Example] Object^ arg ){}
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
static void Main()
{
Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
Type^ t = assembly->GetType( "Test" );
MethodInfo^ m = t->GetMethod( "TestMethod" );
array<ParameterInfo^>^p = m->GetParameters();
Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
}
private:
static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
{
if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
{
Console::WriteLine(" Array of '{0}':", cata->ArgumentType);
for each (CustomAttributeTypedArgument^ cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
{
Console::WriteLine(" Type: '{0}' Value: '{1}'",
cataElement->ArgumentType, cataElement->Value);
}
}
else
{
Console::WriteLine( " Type: '{0}' Value: '{1}'",
cata->ArgumentType, cata->Value );
}
}
static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
{
for each ( CustomAttributeData^ cad in attributes )
{
Console::WriteLine( " {0}", cad );
Console::WriteLine( " Constructor: '{0}'", cad->Constructor );
Console::WriteLine( " Constructor arguments:" );
for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console::WriteLine( " Named arguments:" );
for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
{
Console::WriteLine( " MemberInfo: '{0}'", cana.MemberInfo );
ShowValueOrArray(cana.TypedValue);
}
}
}
};
int main()
{
Test::Main();
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
C#
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]
// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
FirstKind,
SecondKind,
ThirdKind,
FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
// Data for properties.
private ExampleKind kindValue;
private string noteValue;
private string[] arrayStrings;
private int[] arrayNumbers;
// Constructors. The parameterless constructor (.ctor) calls
// the constructor that specifies ExampleKind and an array of
// strings, and supplies the default values.
//
public ExampleAttribute(ExampleKind initKind, string[] initStrings)
{
kindValue = initKind;
arrayStrings = initStrings;
}
public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
public ExampleKind Kind { get { return kindValue; }}
public string[] Strings { get { return arrayStrings; }}
public string Note
{
get { return noteValue; }
set { noteValue = value; }
}
public int[] Numbers
{
get { return arrayNumbers; }
set { arrayNumbers = value; }
}
}
// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
new string[] { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = new int[] { 53, 57, 59 })]
public class Test
{
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
public void TestMethod([Example] object arg) { }
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
public static void Main()
{
Assembly asm = Assembly.ReflectionOnlyLoad("Source");
Type t = asm.GetType("Test");
MethodInfo m = t.GetMethod("TestMethod");
ParameterInfo[] p = m.GetParameters();
Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
Console.WriteLine("\r\nAttributes for type: '{0}'", t);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
Console.WriteLine("\r\nAttributes for member: '{0}'", m);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
}
private static void ShowAttributeData(
IList<CustomAttributeData> attributes)
{
foreach( CustomAttributeData cad in attributes )
{
Console.WriteLine(" {0}", cad);
Console.WriteLine(" Constructor: '{0}'", cad.Constructor);
Console.WriteLine(" Constructor arguments:");
foreach( CustomAttributeTypedArgument cata
in cad.ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console.WriteLine(" Named arguments:");
foreach( CustomAttributeNamedArgument cana
in cad.NamedArguments )
{
Console.WriteLine(" MemberInfo: '{0}'",
cana.MemberInfo);
ShowValueOrArray(cana.TypedValue);
}
}
}
private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
{
if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
{
Console.WriteLine(" Array of '{0}':", cata.ArgumentType);
foreach (CustomAttributeTypedArgument cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cataElement.ArgumentType, cataElement.Value);
}
}
else
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cata.ArgumentType, cata.Value);
}
}
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel
' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>
' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
FirstKind
SecondKind
ThirdKind
FourthKind
End Enum
' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
Inherits Attribute
' Data for properties.
Private kindValue As ExampleKind
Private noteValue As String
Private arrayStrings() As String
Private arrayNumbers() As Integer
' Constructors. The parameterless constructor (.ctor) calls
' the constructor that specifies ExampleKind and an array of
' strings, and supplies the default values.
'
Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
kindValue = initKind
arrayStrings = initStrings
End Sub
Public Sub New(ByVal initKind As ExampleKind)
Me.New(initKind, Nothing)
End Sub
Public Sub New()
Me.New(ExampleKind.FirstKind, Nothing)
End Sub
' Properties. The Note and Numbers properties must be read/write, so they
' can be used as named parameters.
'
Public ReadOnly Property Kind As ExampleKind
Get
Return kindValue
End Get
End Property
Public ReadOnly Property Strings As String()
Get
Return arrayStrings
End Get
End Property
Public Property Note As String
Get
Return noteValue
End Get
Set
noteValue = value
End Set
End Property
Public Property Numbers As Integer()
Get
Return arrayNumbers
End Get
Set
arrayNumbers = value
End Set
End Property
End Class
' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
New String() { "String array argument, line 1", _
"String array argument, line 2", _
"String array argument, line 3" }, _
Note := "This is a note on the class.", _
Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
' The example attribute is applied to a method, using the
' parameterless constructor and supplying a named argument.
' The attribute is also applied to the method parameter.
'
<Example(Note:="This is a note on a method.")> _
Public Sub TestMethod(<Example()> ByVal arg As Object)
End Sub
' Sub Main gets objects representing the assembly, the test
' type, the test method, and the method parameter. Custom
' attribute data is displayed for each of these.
'
Public Shared Sub Main()
Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
Dim t As Type = asm.GetType("Test")
Dim m As MethodInfo = t.GetMethod("TestMethod")
Dim p() As ParameterInfo = m.GetParameters()
Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
End Sub
Private Shared Sub ShowAttributeData( _
ByVal attributes As IList(Of CustomAttributeData))
For Each cad As CustomAttributeData _
In CType(attributes, IEnumerable(Of CustomAttributeData))
Console.WriteLine(" {0}", cad)
Console.WriteLine(" Constructor: '{0}'", cad.Constructor)
Console.WriteLine(" Constructor arguments:")
For Each cata As CustomAttributeTypedArgument _
In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))
ShowValueOrArray(cata)
Next
Console.WriteLine(" Named arguments:")
For Each cana As CustomAttributeNamedArgument _
In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))
Console.WriteLine(" MemberInfo: '{0}'", _
cana.MemberInfo)
ShowValueOrArray(cana.TypedValue)
Next
Next
End Sub
Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
Console.WriteLine(" Array of '{0}':", cata.ArgumentType)
For Each cataElement As CustomAttributeTypedArgument In cata.Value
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cataElement.ArgumentType, cataElement.Value)
Next
Else
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cata.ArgumentType, cata.Value)
End If
End Sub
End Class
' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
' [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
' Constructor: 'Void .ctor(Int32)'
' Constructor arguments:
' Type: 'System.Int32' Value: '8'
' Named arguments:
' [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'Boolean WrapNonExceptionThrows'
' Type: 'System.Boolean' Value: 'True'
' [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
' Constructor: 'Void .ctor(ExampleKind)'
' Constructor arguments:
' Type: 'ExampleKind' Value: '2'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
' [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
' Constructor: 'Void .ctor(ExampleKind, System.String[])'
' Constructor arguments:
' Type: 'ExampleKind' Value: '1'
' Array of 'System.String[]':
' Type: 'System.String' Value: 'String array argument, line 1'
' Type: 'System.String' Value: 'String array argument, line 2'
' Type: 'System.String' Value: 'String array argument, line 3'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the class.'
' MemberInfo: 'Int32[] Numbers'
' Array of 'System.Int32[]':
' Type: 'System.Int32' Value: '53'
' Type: 'System.Int32' Value: '57'
' Type: 'System.Int32' Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
' [ExampleAttribute(Note = "This is a note on a method.")]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
' [ExampleAttribute()]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
Remarques
Cette méthode fournit une alternative à la GetCustomAttributes méthode qui peut toujours être utilisée dans le contexte De réflexion uniquement.
Voir aussi
S’applique à
.NET 10 et autres versions
| Produit | Versions |
|---|---|
| .NET | Core 1.0, Core 1.1, Core 2.0, Core 2.1, Core 2.2, Core 3.0, Core 3.1, 5, 6, 7, 8, 9, 10 |
| .NET Framework | 2.0, 3.0, 3.5, 4.0, 4.5, 4.5.1, 4.5.2, 4.6, 4.6.1, 4.6.2, 4.7, 4.7.1, 4.7.2, 4.8, 4.8.1 |
| .NET Standard | 1.5, 1.6, 2.0, 2.1 |
- Source:
- CustomAttributeData.cs
- Source:
- CustomAttributeData.cs
- Source:
- CustomAttributeData.cs
Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au membre cible.
public:
static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ target);C#
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.MemberInfo target);static member GetCustomAttributes : System.Reflection.MemberInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>Public Shared Function GetCustomAttributes (target As MemberInfo) As IList(Of CustomAttributeData)Paramètres
- target
- MemberInfo
Le membre dont les données d’attribut doivent être récupérées.
Retours
Liste d’objets représentant des données sur les attributs qui ont été appliqués au membre cible.
Exceptions
target a la valeur null.
Exemples
L’exemple suivant définit un attribut personnalisé avec quatre constructeurs et quatre propriétés. Deux des propriétés sont en lecture seule et sont définies à l’aide des paramètres positionnels des constructeurs. Les deux autres propriétés sont en lecture/écriture et peuvent être définies uniquement à l’aide d’arguments nommés. Une propriété positionnelle est un tableau de chaînes, et une propriété nommée est un tableau d’entiers.
L’attribut est appliqué à l’assembly, à un type déclaré dans l’assembly, à une méthode du type, et à un paramètre de la méthode. Différents constructeurs sont utilisés pour ces cas. Lorsqu’il est exécuté, l’assembly se charge lui-même dans le contexte de réflexion uniquement et affiche les attributs personnalisés.
L’attribut appliqué au type illustre les propriétés du tableau, avec des arguments positionnels et nommés.
La GetCustomAttributes méthode est utilisée dans Main() pour obtenir les attributs personnalisés qui ont été appliqués à un type et à une méthode de test (Type dérive de MemberInfo). La valeur de retour de GetCustomAttributes est passée à la ShowAttributeData méthode .
using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;
// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
FirstKind, SecondKind, ThirdKind, FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
// Data for properties.
ExampleKind kindValue;
String^ noteValue;
array<String^>^ arrayStrings;
array<int>^ arrayNumbers;
// Constructors.
void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
{
kindValue = initKind;
arrayStrings = initStrings;
}
public:
ExampleAttribute()
{
ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
}
ExampleAttribute( ExampleKind initKind )
{
ExampleAttributeInitialize( initKind, nullptr );
}
ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
{
ExampleAttributeInitialize( initKind, initStrings );
}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
property ExampleKind Kind
{
ExampleKind get()
{
return kindValue;
}
}
property array<String^>^ Strings
{
array<String^>^ get()
{
return arrayStrings;
}
}
property String^ Note
{
String^ get()
{
return noteValue;
}
void set( String^ value )
{
noteValue = value;
}
}
property array<int>^ Numbers
{
array<int>^ get()
{
return arrayNumbers;
}
void set( array<int>^ value )
{
arrayNumbers = value;
}
}
};
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];
// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind,
gcnew array<String^> { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = gcnew array<int> { 53, 57, 59 })]
public ref class Test
{
public:
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
void TestMethod( [Example] Object^ arg ){}
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
static void Main()
{
Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
Type^ t = assembly->GetType( "Test" );
MethodInfo^ m = t->GetMethod( "TestMethod" );
array<ParameterInfo^>^p = m->GetParameters();
Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
}
private:
static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
{
if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
{
Console::WriteLine(" Array of '{0}':", cata->ArgumentType);
for each (CustomAttributeTypedArgument^ cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
{
Console::WriteLine(" Type: '{0}' Value: '{1}'",
cataElement->ArgumentType, cataElement->Value);
}
}
else
{
Console::WriteLine( " Type: '{0}' Value: '{1}'",
cata->ArgumentType, cata->Value );
}
}
static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
{
for each ( CustomAttributeData^ cad in attributes )
{
Console::WriteLine( " {0}", cad );
Console::WriteLine( " Constructor: '{0}'", cad->Constructor );
Console::WriteLine( " Constructor arguments:" );
for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console::WriteLine( " Named arguments:" );
for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
{
Console::WriteLine( " MemberInfo: '{0}'", cana.MemberInfo );
ShowValueOrArray(cana.TypedValue);
}
}
}
};
int main()
{
Test::Main();
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
C#
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]
// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
FirstKind,
SecondKind,
ThirdKind,
FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
// Data for properties.
private ExampleKind kindValue;
private string noteValue;
private string[] arrayStrings;
private int[] arrayNumbers;
// Constructors. The parameterless constructor (.ctor) calls
// the constructor that specifies ExampleKind and an array of
// strings, and supplies the default values.
//
public ExampleAttribute(ExampleKind initKind, string[] initStrings)
{
kindValue = initKind;
arrayStrings = initStrings;
}
public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
public ExampleKind Kind { get { return kindValue; }}
public string[] Strings { get { return arrayStrings; }}
public string Note
{
get { return noteValue; }
set { noteValue = value; }
}
public int[] Numbers
{
get { return arrayNumbers; }
set { arrayNumbers = value; }
}
}
// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
new string[] { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = new int[] { 53, 57, 59 })]
public class Test
{
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
public void TestMethod([Example] object arg) { }
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
public static void Main()
{
Assembly asm = Assembly.ReflectionOnlyLoad("Source");
Type t = asm.GetType("Test");
MethodInfo m = t.GetMethod("TestMethod");
ParameterInfo[] p = m.GetParameters();
Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
Console.WriteLine("\r\nAttributes for type: '{0}'", t);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
Console.WriteLine("\r\nAttributes for member: '{0}'", m);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
}
private static void ShowAttributeData(
IList<CustomAttributeData> attributes)
{
foreach( CustomAttributeData cad in attributes )
{
Console.WriteLine(" {0}", cad);
Console.WriteLine(" Constructor: '{0}'", cad.Constructor);
Console.WriteLine(" Constructor arguments:");
foreach( CustomAttributeTypedArgument cata
in cad.ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console.WriteLine(" Named arguments:");
foreach( CustomAttributeNamedArgument cana
in cad.NamedArguments )
{
Console.WriteLine(" MemberInfo: '{0}'",
cana.MemberInfo);
ShowValueOrArray(cana.TypedValue);
}
}
}
private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
{
if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
{
Console.WriteLine(" Array of '{0}':", cata.ArgumentType);
foreach (CustomAttributeTypedArgument cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cataElement.ArgumentType, cataElement.Value);
}
}
else
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cata.ArgumentType, cata.Value);
}
}
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel
' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>
' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
FirstKind
SecondKind
ThirdKind
FourthKind
End Enum
' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
Inherits Attribute
' Data for properties.
Private kindValue As ExampleKind
Private noteValue As String
Private arrayStrings() As String
Private arrayNumbers() As Integer
' Constructors. The parameterless constructor (.ctor) calls
' the constructor that specifies ExampleKind and an array of
' strings, and supplies the default values.
'
Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
kindValue = initKind
arrayStrings = initStrings
End Sub
Public Sub New(ByVal initKind As ExampleKind)
Me.New(initKind, Nothing)
End Sub
Public Sub New()
Me.New(ExampleKind.FirstKind, Nothing)
End Sub
' Properties. The Note and Numbers properties must be read/write, so they
' can be used as named parameters.
'
Public ReadOnly Property Kind As ExampleKind
Get
Return kindValue
End Get
End Property
Public ReadOnly Property Strings As String()
Get
Return arrayStrings
End Get
End Property
Public Property Note As String
Get
Return noteValue
End Get
Set
noteValue = value
End Set
End Property
Public Property Numbers As Integer()
Get
Return arrayNumbers
End Get
Set
arrayNumbers = value
End Set
End Property
End Class
' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
New String() { "String array argument, line 1", _
"String array argument, line 2", _
"String array argument, line 3" }, _
Note := "This is a note on the class.", _
Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
' The example attribute is applied to a method, using the
' parameterless constructor and supplying a named argument.
' The attribute is also applied to the method parameter.
'
<Example(Note:="This is a note on a method.")> _
Public Sub TestMethod(<Example()> ByVal arg As Object)
End Sub
' Sub Main gets objects representing the assembly, the test
' type, the test method, and the method parameter. Custom
' attribute data is displayed for each of these.
'
Public Shared Sub Main()
Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
Dim t As Type = asm.GetType("Test")
Dim m As MethodInfo = t.GetMethod("TestMethod")
Dim p() As ParameterInfo = m.GetParameters()
Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
End Sub
Private Shared Sub ShowAttributeData( _
ByVal attributes As IList(Of CustomAttributeData))
For Each cad As CustomAttributeData _
In CType(attributes, IEnumerable(Of CustomAttributeData))
Console.WriteLine(" {0}", cad)
Console.WriteLine(" Constructor: '{0}'", cad.Constructor)
Console.WriteLine(" Constructor arguments:")
For Each cata As CustomAttributeTypedArgument _
In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))
ShowValueOrArray(cata)
Next
Console.WriteLine(" Named arguments:")
For Each cana As CustomAttributeNamedArgument _
In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))
Console.WriteLine(" MemberInfo: '{0}'", _
cana.MemberInfo)
ShowValueOrArray(cana.TypedValue)
Next
Next
End Sub
Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
Console.WriteLine(" Array of '{0}':", cata.ArgumentType)
For Each cataElement As CustomAttributeTypedArgument In cata.Value
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cataElement.ArgumentType, cataElement.Value)
Next
Else
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cata.ArgumentType, cata.Value)
End If
End Sub
End Class
' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
' [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
' Constructor: 'Void .ctor(Int32)'
' Constructor arguments:
' Type: 'System.Int32' Value: '8'
' Named arguments:
' [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'Boolean WrapNonExceptionThrows'
' Type: 'System.Boolean' Value: 'True'
' [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
' Constructor: 'Void .ctor(ExampleKind)'
' Constructor arguments:
' Type: 'ExampleKind' Value: '2'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
' [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
' Constructor: 'Void .ctor(ExampleKind, System.String[])'
' Constructor arguments:
' Type: 'ExampleKind' Value: '1'
' Array of 'System.String[]':
' Type: 'System.String' Value: 'String array argument, line 1'
' Type: 'System.String' Value: 'String array argument, line 2'
' Type: 'System.String' Value: 'String array argument, line 3'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the class.'
' MemberInfo: 'Int32[] Numbers'
' Array of 'System.Int32[]':
' Type: 'System.Int32' Value: '53'
' Type: 'System.Int32' Value: '57'
' Type: 'System.Int32' Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
' [ExampleAttribute(Note = "This is a note on a method.")]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
' [ExampleAttribute()]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
Remarques
Cette surcharge de méthode obtient des données d’attribut personnalisées pour les types, les types imbriqués et les membres de type, car la Type classe et les classes de l’espace System.Reflection de noms qui représentent les membres de type dérivent toutes de MemberInfo.
Voir aussi
S’applique à
.NET 10 et autres versions
| Produit | Versions |
|---|---|
| .NET | Core 1.0, Core 1.1, Core 2.0, Core 2.1, Core 2.2, Core 3.0, Core 3.1, 5, 6, 7, 8, 9, 10 |
| .NET Framework | 2.0, 3.0, 3.5, 4.0, 4.5, 4.5.1, 4.5.2, 4.6, 4.6.1, 4.6.2, 4.7, 4.7.1, 4.7.2, 4.8, 4.8.1 |
| .NET Standard | 1.5, 1.6, 2.0, 2.1 |
- Source:
- CustomAttributeData.cs
- Source:
- CustomAttributeData.cs
- Source:
- CustomAttributeData.cs
Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au module cible.
public:
static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Module ^ target);C#
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.Module target);static member GetCustomAttributes : System.Reflection.Module -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>Public Shared Function GetCustomAttributes (target As Module) As IList(Of CustomAttributeData)Paramètres
- target
- Module
Le module dont les données d’attribut personnalisé doivent être récupérées.
Retours
Une liste d’objets représentant des données sur les attributs qui ont été appliqués au module cible.
Exceptions
target a la valeur null.
S’applique à
.NET 10 et autres versions
| Produit | Versions |
|---|---|
| .NET | Core 1.0, Core 1.1, Core 2.0, Core 2.1, Core 2.2, Core 3.0, Core 3.1, 5, 6, 7, 8, 9, 10 |
| .NET Framework | 2.0, 3.0, 3.5, 4.0, 4.5, 4.5.1, 4.5.2, 4.6, 4.6.1, 4.6.2, 4.7, 4.7.1, 4.7.2, 4.8, 4.8.1 |
| .NET Standard | 1.5, 1.6, 2.0, 2.1 |
- Source:
- CustomAttributeData.cs
- Source:
- CustomAttributeData.cs
- Source:
- CustomAttributeData.cs
Retourne une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au paramètre cible.
public:
static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::ParameterInfo ^ target);C#
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.ParameterInfo target);static member GetCustomAttributes : System.Reflection.ParameterInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>Public Shared Function GetCustomAttributes (target As ParameterInfo) As IList(Of CustomAttributeData)Paramètres
- target
- ParameterInfo
Le paramètre dont les données d’attribut doivent être récupérées.
Retours
Une liste d’objets représentant des données sur les attributs qui ont été appliqués au paramètre cible.
Exceptions
target a la valeur null.
Exemples
L’exemple suivant définit un attribut personnalisé avec quatre constructeurs et quatre propriétés. Deux des propriétés sont en lecture seule et sont définies à l’aide des paramètres positionnels des constructeurs. Les deux autres propriétés sont en lecture/écriture et peuvent être définies uniquement à l’aide d’arguments nommés. Une propriété positionnelle est un tableau de chaînes, et une propriété nommée est un tableau d’entiers.
L’attribut est appliqué à l’assembly, à un type déclaré dans l’assembly, à une méthode du type, et à un paramètre de la méthode. Différents constructeurs sont utilisés pour ces cas. Lorsqu’il est exécuté, l’assembly se charge lui-même dans le contexte de réflexion uniquement et affiche les attributs personnalisés.
L’attribut appliqué au type illustre les propriétés du tableau, avec des arguments positionnels et nommés.
La GetCustomAttributes méthode est utilisée dans Main() pour récupérer les attributs personnalisés appliqués à un paramètre d’une méthode de test. La valeur de retour de GetCustomAttributes est passée à la ShowAttributeData méthode .
using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;
// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
FirstKind, SecondKind, ThirdKind, FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
// Data for properties.
ExampleKind kindValue;
String^ noteValue;
array<String^>^ arrayStrings;
array<int>^ arrayNumbers;
// Constructors.
void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
{
kindValue = initKind;
arrayStrings = initStrings;
}
public:
ExampleAttribute()
{
ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
}
ExampleAttribute( ExampleKind initKind )
{
ExampleAttributeInitialize( initKind, nullptr );
}
ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
{
ExampleAttributeInitialize( initKind, initStrings );
}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
property ExampleKind Kind
{
ExampleKind get()
{
return kindValue;
}
}
property array<String^>^ Strings
{
array<String^>^ get()
{
return arrayStrings;
}
}
property String^ Note
{
String^ get()
{
return noteValue;
}
void set( String^ value )
{
noteValue = value;
}
}
property array<int>^ Numbers
{
array<int>^ get()
{
return arrayNumbers;
}
void set( array<int>^ value )
{
arrayNumbers = value;
}
}
};
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];
// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind,
gcnew array<String^> { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = gcnew array<int> { 53, 57, 59 })]
public ref class Test
{
public:
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
void TestMethod( [Example] Object^ arg ){}
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
static void Main()
{
Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
Type^ t = assembly->GetType( "Test" );
MethodInfo^ m = t->GetMethod( "TestMethod" );
array<ParameterInfo^>^p = m->GetParameters();
Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
}
private:
static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
{
if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
{
Console::WriteLine(" Array of '{0}':", cata->ArgumentType);
for each (CustomAttributeTypedArgument^ cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
{
Console::WriteLine(" Type: '{0}' Value: '{1}'",
cataElement->ArgumentType, cataElement->Value);
}
}
else
{
Console::WriteLine( " Type: '{0}' Value: '{1}'",
cata->ArgumentType, cata->Value );
}
}
static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
{
for each ( CustomAttributeData^ cad in attributes )
{
Console::WriteLine( " {0}", cad );
Console::WriteLine( " Constructor: '{0}'", cad->Constructor );
Console::WriteLine( " Constructor arguments:" );
for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console::WriteLine( " Named arguments:" );
for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
{
Console::WriteLine( " MemberInfo: '{0}'", cana.MemberInfo );
ShowValueOrArray(cana.TypedValue);
}
}
}
};
int main()
{
Test::Main();
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
C#
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]
// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
FirstKind,
SecondKind,
ThirdKind,
FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
// Data for properties.
private ExampleKind kindValue;
private string noteValue;
private string[] arrayStrings;
private int[] arrayNumbers;
// Constructors. The parameterless constructor (.ctor) calls
// the constructor that specifies ExampleKind and an array of
// strings, and supplies the default values.
//
public ExampleAttribute(ExampleKind initKind, string[] initStrings)
{
kindValue = initKind;
arrayStrings = initStrings;
}
public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
public ExampleKind Kind { get { return kindValue; }}
public string[] Strings { get { return arrayStrings; }}
public string Note
{
get { return noteValue; }
set { noteValue = value; }
}
public int[] Numbers
{
get { return arrayNumbers; }
set { arrayNumbers = value; }
}
}
// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
new string[] { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = new int[] { 53, 57, 59 })]
public class Test
{
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
public void TestMethod([Example] object arg) { }
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
public static void Main()
{
Assembly asm = Assembly.ReflectionOnlyLoad("Source");
Type t = asm.GetType("Test");
MethodInfo m = t.GetMethod("TestMethod");
ParameterInfo[] p = m.GetParameters();
Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
Console.WriteLine("\r\nAttributes for type: '{0}'", t);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
Console.WriteLine("\r\nAttributes for member: '{0}'", m);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
}
private static void ShowAttributeData(
IList<CustomAttributeData> attributes)
{
foreach( CustomAttributeData cad in attributes )
{
Console.WriteLine(" {0}", cad);
Console.WriteLine(" Constructor: '{0}'", cad.Constructor);
Console.WriteLine(" Constructor arguments:");
foreach( CustomAttributeTypedArgument cata
in cad.ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console.WriteLine(" Named arguments:");
foreach( CustomAttributeNamedArgument cana
in cad.NamedArguments )
{
Console.WriteLine(" MemberInfo: '{0}'",
cana.MemberInfo);
ShowValueOrArray(cana.TypedValue);
}
}
}
private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
{
if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
{
Console.WriteLine(" Array of '{0}':", cata.ArgumentType);
foreach (CustomAttributeTypedArgument cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cataElement.ArgumentType, cataElement.Value);
}
}
else
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cata.ArgumentType, cata.Value);
}
}
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel
' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>
' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
FirstKind
SecondKind
ThirdKind
FourthKind
End Enum
' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
Inherits Attribute
' Data for properties.
Private kindValue As ExampleKind
Private noteValue As String
Private arrayStrings() As String
Private arrayNumbers() As Integer
' Constructors. The parameterless constructor (.ctor) calls
' the constructor that specifies ExampleKind and an array of
' strings, and supplies the default values.
'
Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
kindValue = initKind
arrayStrings = initStrings
End Sub
Public Sub New(ByVal initKind As ExampleKind)
Me.New(initKind, Nothing)
End Sub
Public Sub New()
Me.New(ExampleKind.FirstKind, Nothing)
End Sub
' Properties. The Note and Numbers properties must be read/write, so they
' can be used as named parameters.
'
Public ReadOnly Property Kind As ExampleKind
Get
Return kindValue
End Get
End Property
Public ReadOnly Property Strings As String()
Get
Return arrayStrings
End Get
End Property
Public Property Note As String
Get
Return noteValue
End Get
Set
noteValue = value
End Set
End Property
Public Property Numbers As Integer()
Get
Return arrayNumbers
End Get
Set
arrayNumbers = value
End Set
End Property
End Class
' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
New String() { "String array argument, line 1", _
"String array argument, line 2", _
"String array argument, line 3" }, _
Note := "This is a note on the class.", _
Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
' The example attribute is applied to a method, using the
' parameterless constructor and supplying a named argument.
' The attribute is also applied to the method parameter.
'
<Example(Note:="This is a note on a method.")> _
Public Sub TestMethod(<Example()> ByVal arg As Object)
End Sub
' Sub Main gets objects representing the assembly, the test
' type, the test method, and the method parameter. Custom
' attribute data is displayed for each of these.
'
Public Shared Sub Main()
Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
Dim t As Type = asm.GetType("Test")
Dim m As MethodInfo = t.GetMethod("TestMethod")
Dim p() As ParameterInfo = m.GetParameters()
Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
End Sub
Private Shared Sub ShowAttributeData( _
ByVal attributes As IList(Of CustomAttributeData))
For Each cad As CustomAttributeData _
In CType(attributes, IEnumerable(Of CustomAttributeData))
Console.WriteLine(" {0}", cad)
Console.WriteLine(" Constructor: '{0}'", cad.Constructor)
Console.WriteLine(" Constructor arguments:")
For Each cata As CustomAttributeTypedArgument _
In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))
ShowValueOrArray(cata)
Next
Console.WriteLine(" Named arguments:")
For Each cana As CustomAttributeNamedArgument _
In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))
Console.WriteLine(" MemberInfo: '{0}'", _
cana.MemberInfo)
ShowValueOrArray(cana.TypedValue)
Next
Next
End Sub
Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
Console.WriteLine(" Array of '{0}':", cata.ArgumentType)
For Each cataElement As CustomAttributeTypedArgument In cata.Value
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cataElement.ArgumentType, cataElement.Value)
Next
Else
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cata.ArgumentType, cata.Value)
End If
End Sub
End Class
' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
' [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
' Constructor: 'Void .ctor(Int32)'
' Constructor arguments:
' Type: 'System.Int32' Value: '8'
' Named arguments:
' [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'Boolean WrapNonExceptionThrows'
' Type: 'System.Boolean' Value: 'True'
' [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
' Constructor: 'Void .ctor(ExampleKind)'
' Constructor arguments:
' Type: 'ExampleKind' Value: '2'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
' [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
' Constructor: 'Void .ctor(ExampleKind, System.String[])'
' Constructor arguments:
' Type: 'ExampleKind' Value: '1'
' Array of 'System.String[]':
' Type: 'System.String' Value: 'String array argument, line 1'
' Type: 'System.String' Value: 'String array argument, line 2'
' Type: 'System.String' Value: 'String array argument, line 3'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the class.'
' MemberInfo: 'Int32[] Numbers'
' Array of 'System.Int32[]':
' Type: 'System.Int32' Value: '53'
' Type: 'System.Int32' Value: '57'
' Type: 'System.Int32' Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
' [ExampleAttribute(Note = "This is a note on a method.")]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
' [ExampleAttribute()]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
Remarques
Cette méthode fournit une alternative à la GetCustomAttributes méthode qui peut toujours être utilisée dans le contexte De réflexion uniquement.
Voir aussi
S’applique à
.NET 10 et autres versions
| Produit | Versions |
|---|---|
| .NET | Core 1.0, Core 1.1, Core 2.0, Core 2.1, Core 2.2, Core 3.0, Core 3.1, 5, 6, 7, 8, 9, 10 |
| .NET Framework | 2.0, 3.0, 3.5, 4.0, 4.5, 4.5.1, 4.5.2, 4.6, 4.6.1, 4.6.2, 4.7, 4.7.1, 4.7.2, 4.8, 4.8.1 |
| .NET Standard | 1.5, 1.6, 2.0, 2.1 |
Collaborer avec nous sur GitHub
La source de ce contenu se trouve sur GitHub, où vous pouvez également créer et examiner les problèmes et les demandes de tirage. Pour plus d’informations, consultez notre guide du contributeur.
Commentaires sur .NET
.NET est un projet open source. Sélectionnez un lien pour fournir des commentaires :