IErrorHandler.ProvideFault(Exception, MessageVersion, Message) Méthode

Référence

Définition

Espace de noms:: System.ServiceModel.Dispatcher

Assembly:: System.ServiceModel.dll

Important

Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.

Active la création d'un FaultException<TDetail> personnalisé retourné d'une exception au cours d'une méthode de service.

public:
 void ProvideFault(Exception ^ error, System::ServiceModel::Channels::MessageVersion ^ version, System::ServiceModel::Channels::Message ^ % fault);

public:
 void ProvideFault(Exception ^ exception, System::ServiceModel::Channels::MessageVersion ^ version, System::ServiceModel::Channels::Message ^ % fault);

public void ProvideFault (Exception error, System.ServiceModel.Channels.MessageVersion version, ref System.ServiceModel.Channels.Message fault);

public void ProvideFault (Exception exception, System.ServiceModel.Channels.MessageVersion version, ref System.ServiceModel.Channels.Message fault);

abstract member ProvideFault : Exception * System.ServiceModel.Channels.MessageVersion * Message -> unit

abstract member ProvideFault : Exception * System.ServiceModel.Channels.MessageVersion * Message -> unit

Public Sub ProvideFault (error As Exception, version As MessageVersion, ByRef fault As Message)

Public Sub ProvideFault (exception As Exception, version As MessageVersion, ByRef fault As Message)

Paramètres

errorexception: Exception

Objet Exception levé au cours de l'opération de service.

version: MessageVersion

Version SOAP du message.

fault: Message

Objet Message retourné au client ou au service, dans le cas duplex.

Exemples

L'exemple de code suivant présente un service qui implémente IErrorHandler qui retourne uniquement FaultException<TDetail> de type GreetingFault lorsqu'une méthode de service lève une exception managée.

#region IErrorHandler Members
public bool HandleError(Exception error)
{
  Console.WriteLine("HandleError called.");
  // Returning true indicates you performed your behavior.
  return true;
}

// This is a trivial implementation that converts Exception to FaultException<GreetingFault>.
public void ProvideFault(
  Exception error,
  MessageVersion ver,
  ref Message msg
)
{
  Console.WriteLine("ProvideFault called. Converting Exception to GreetingFault....");
  FaultException<GreetingFault> fe
    = new FaultException<GreetingFault>(new GreetingFault(error.Message));
  MessageFault fault = fe.CreateMessageFault();
  msg = Message.CreateMessage(
    ver,
    fault,
    "http://microsoft.wcf.documentation/ISampleService/SampleMethodGreetingFaultFault"
  );
}
#endregion

#Region "IErrorHandler Members"
Public Function HandleError(ByVal [error] As Exception) As Boolean Implements IErrorHandler.HandleError
  Console.WriteLine("HandleError called.")
  ' Returning true indicates you performed your behavior.
  Return True
End Function

' This is a trivial implementation that converts Exception to FaultException<GreetingFault>.
Public Sub ProvideFault(ByVal [error] As Exception, ByVal ver As MessageVersion, ByRef msg As Message) Implements IErrorHandler.ProvideFault
  Console.WriteLine("ProvideFault called. Converting Exception to GreetingFault....")
  Dim fe As New FaultException(Of GreetingFault)(New GreetingFault([error].Message))
  Dim fault As MessageFault = fe.CreateMessageFault()
  msg = Message.CreateMessage(ver, fault, "http://microsoft.wcf.documentation/ISampleService/SampleMethodGreetingFaultFault")
End Sub
#End Region

L'exemple de code suivant indique comment utiliser un comportement de service pour ajouter l'implémentation IErrorHandler à la propriété ErrorHandlers.

// This behavior modifies no binding parameters.
#region IServiceBehavior Members
public void AddBindingParameters(
  ServiceDescription description,
  ServiceHostBase serviceHostBase,
  System.Collections.ObjectModel.Collection<ServiceEndpoint> endpoints,
  System.ServiceModel.Channels.BindingParameterCollection parameters
)
{
  return;
}

// This behavior is an IErrorHandler implementation and
// must be applied to each ChannelDispatcher.
public void ApplyDispatchBehavior(ServiceDescription description, ServiceHostBase serviceHostBase)
{
  Console.WriteLine("The EnforceGreetingFaultBehavior has been applied.");
  foreach(ChannelDispatcher chanDisp in serviceHostBase.ChannelDispatchers)
  {
    chanDisp.ErrorHandlers.Add(this);
  }
}

// This behavior requires that the contract have a SOAP fault with a detail type of GreetingFault.
public void Validate(ServiceDescription description, ServiceHostBase serviceHostBase)
{
  Console.WriteLine("Validate is called.");
  foreach (ServiceEndpoint se in description.Endpoints)
  {
    // Must not examine any metadata endpoint.
    if (se.Contract.Name.Equals("IMetadataExchange")
      && se.Contract.Namespace.Equals("http://schemas.microsoft.com/2006/04/mex"))
      continue;
    foreach (OperationDescription opDesc in se.Contract.Operations)
    {
      if (opDesc.Faults.Count == 0)
        throw new InvalidOperationException(String.Format(
          "EnforceGreetingFaultBehavior requires a "
          + "FaultContractAttribute(typeof(GreetingFault)) in each operation contract.  "
          + "The \"{0}\" operation contains no FaultContractAttribute.",
          opDesc.Name)
        );
      bool gfExists = false;
      foreach (FaultDescription fault in opDesc.Faults)
      {
        if (fault.DetailType.Equals(typeof(GreetingFault)))
        {
          gfExists = true;
          continue;
        }
      }
      if (gfExists == false)
      {
        throw new InvalidOperationException(
"EnforceGreetingFaultBehavior requires a FaultContractAttribute(typeof(GreetingFault)) in an operation contract."
        );
      }
    }
  }
}
#endregion

' This behavior modifies no binding parameters.
#Region "IServiceBehavior Members"
Public Sub AddBindingParameters(ByVal description As ServiceDescription, ByVal serviceHostBase As ServiceHostBase, ByVal endpoints As System.Collections.ObjectModel.Collection(Of ServiceEndpoint), ByVal parameters As System.ServiceModel.Channels.BindingParameterCollection) Implements IServiceBehavior.AddBindingParameters
  Return
End Sub

' This behavior is an IErrorHandler implementation and 
' must be applied to each ChannelDispatcher.
Public Sub ApplyDispatchBehavior(ByVal description As ServiceDescription, ByVal serviceHostBase As ServiceHostBase) Implements IServiceBehavior.ApplyDispatchBehavior
  Console.WriteLine("The EnforceGreetingFaultBehavior has been applied.")
  For Each chanDisp As ChannelDispatcher In serviceHostBase.ChannelDispatchers
    chanDisp.ErrorHandlers.Add(Me)
  Next chanDisp
End Sub

' This behavior requires that the contract have a SOAP fault with a detail type of GreetingFault.
Public Sub Validate(ByVal description As ServiceDescription, ByVal serviceHostBase As ServiceHostBase) Implements IServiceBehavior.Validate
  Console.WriteLine("Validate is called.")
  For Each se As ServiceEndpoint In description.Endpoints
    ' Must not examine any metadata endpoint.
    If se.Contract.Name.Equals("IMetadataExchange") AndAlso se.Contract.Namespace.Equals("http://schemas.microsoft.com/2006/04/mex") Then
      Continue For
    End If
    For Each opDesc As OperationDescription In se.Contract.Operations
      If opDesc.Faults.Count = 0 Then
        Throw New InvalidOperationException(String.Format("EnforceGreetingFaultBehavior requires a " & "FaultContractAttribute(typeof(GreetingFault)) in each operation contract.  " & "The ""{0}"" operation contains no FaultContractAttribute.", opDesc.Name))
      End If
      Dim gfExists As Boolean = False
      For Each fault As FaultDescription In opDesc.Faults
        If fault.DetailType.Equals(GetType(GreetingFault)) Then
          gfExists = True
          Continue For
        End If
      Next fault
      If gfExists = False Then
        Throw New InvalidOperationException("EnforceGreetingFaultBehavior requires a FaultContractAttribute(typeof(GreetingFault)) in an operation contract.")
      End If
    Next opDesc
  Next se
End Sub
#End Region

L'exemple de code suivant indique comment configurer le service pour charger le comportement de service à l'aide d'un fichier de configuration de l'application. Pour plus d'informations sur la façon d'exposer un comportement de service dans un fichier de configuration, consultez IServiceBehavior.

<configuration>
  <system.serviceModel>
    <services>
      <service 
        name="Microsoft.WCF.Documentation.SampleService"
        behaviorConfiguration="metaAndErrors">
        <host>
          <baseAddresses>
            <add baseAddress="http://localhost:8080/SampleService"/>
          </baseAddresses>
        </host>
        <endpoint
          address=""
          binding="wsHttpBinding"
          contract="Microsoft.WCF.Documentation.ISampleService"
         />
        <endpoint
          address="mex"
          binding="mexHttpBinding"
          contract="IMetadataExchange"
         />
      </service>
    </services>
    <behaviors>
      <serviceBehaviors>
        <behavior name="metaAndErrors">
          <serviceDebug includeExceptionDetailInFaults="true"/>
          <serviceMetadata httpGetEnabled="true"/>
          <enforceGreetingFaults />
        </behavior>
      </serviceBehaviors>
    </behaviors>
    <extensions>
      <behaviorExtensions>
        <add 
          name="enforceGreetingFaults" 
          type="Microsoft.WCF.Documentation.EnforceGreetingFaultBehavior, HostApplication, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null"
        />
      </behaviorExtensions>
    </extensions>
  </system.serviceModel>
</configuration>

Remarques

Implémentez la méthode ProvideFault pour créer un message d'erreur personnalisé retourné au client. La ProvideFault méthode est toujours appelée pour les exceptions qui quittent les opérations, sauf lorsque le runtime WCF reconnaît l’exception comme étant particulièrement irrécupérable et réinitule l’exception elle-même. Lorsque toutes les implémentations ProvideFault ont été appelées, le message d'erreur est retourné au client (si fault n'a pas la valeur null). Si le fault paramètre est null l’erreur par défaut est envoyée au client.

Notes

Le message entrant qui a provoqué l'erreur de traitement est disponible au cours de cette méthode à partir de la propriété OperationContext.RequestContext.