Lire en anglais

Partager via


Diagnosability - Kernel Debugging - Enable serial kernel debugging

This optional test is not required for certification. This test is provided to help troubleshoot certain test failures. When you debug test failures, you can use this optional test to enable serial kernel debugging.

Test details

Associated requirements

Device.DevFund.Reliability.Discretional System.Fundamentals.Reliability.Discretional

See the system hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~5 minutes

Categories

Optional

Type

Automated

 

Running the test

See Setting Up Kernel-Mode Debugging over a Serial Cable Manually for device and system configuration requirements to enable serial kernel debugging.

Troubleshooting

See the Troubleshooting Tips for Debugging over a Serial cable section of Setting Up Kernel-Mode Debugging over a Serial Cable Manually for troubleshooting assistance.

More information

Parameters

Parameter Description

DebugPort

Specifies the debug port to use for serial kernel debugging.

BaudRate

Specifies the baud rate to use for serial kernel debugging.

 

Diagnosability - Kernel Debugging Tests

 

 

Send comments about this topic to Microsoft