Database Engine events and errors (0 to 999)

This article contains error message numbers (between the range 0 and 999) and their description, which is the text of the error message from the sys.messages catalog view. Where applicable, the error number is a link to further information.

For the full range of error numbers, see the list on Database Engine events and errors.

You can query the Database Engine to see a full list of all errors, by running the following query against the sys.messages catalog view:

SELECT message_id AS Error,
    severity AS Severity,
    [Event Logged] = CASE is_event_logged
        WHEN 0 THEN 'No' ELSE 'Yes'
        END,
    [text] AS [Description]
FROM sys.messages
WHERE language_id = 1040 /* replace 1040 with the desired language ID, such as 1033 for US English */
ORDER BY message_id;

SQL Server version

This article shows events and errors (between the range 0 and 999) for SQL Server 2022 (16.x). If you want to view events and errors for other versions of SQL Server, see:

• SQL Server 2019
• SQL Server 2017
• SQL Server 2016

Errors and events (0 to 999)

Error	Severity	Event logged	Description
21	20	No	Warning: Fatal error %d occurred at %S_DATE. Note the error and time, and contact your system administrator.
101	15	No	Query not allowed in Waitfor.
102	15	No	Incorrect syntax near '%.*ls'.
103	15	No	The %S_MSG that starts with '%.*ls' is too long. Maximum length is %d.
104	15	No	ORDER BY items must appear in the select list if the statement contains a UNION, INTERSECT or EXCEPT operator.
105	15	No	Unclosed quotation mark after the character string '%.*ls'.
106	16	No	Too many table names in the query. The maximum allowable is %d.
107	15	No	The column prefix '%.*ls' does not match with a table name or alias name used in the query.
108	15	No	The ORDER BY position number %ld is out of range of the number of items in the select list.
109	15	No	There are more columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.
110	15	No	There are fewer columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.
111	15	No	'%ls' must be the first statement in a query batch.
112	15	No	Variables are not allowed in the %ls statement.
113	15	No	Missing end comment mark '*/'.
114	15	No	Browse mode is invalid for a statement that assigns values to a variable.
115	15	No	The FOR UPDATE clause is invalid for statements containing set operators.
116	15	No	Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
117	15	No	The %S_MSG name '%.*ls' contains more than the maximum number of prefixes. The maximum is %d.
119	15	No	Must pass parameter number %d and subsequent parameters as '@name = value'. After the form '@name = value' has been used, all subsequent parameters must be passed in the form '@name = value'.
120	15	No	The select list for the INSERT statement contains fewer items than the insert list. The number of SELECT values must match the number of INSERT columns.
121	15	No	The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns.
122	15	No	The %ls option is allowed only with %ls syntax.
123	15	No	Batch/procedure exceeds maximum length of %d characters.
124	15	No	CREATE PROCEDURE contains no statements.
125	15	No	Case expressions may only be nested to level %d.
126	15	No	Invalid pseudocolumn "%.*ls".
127	15	No	A TOP N or FETCH rowcount value may not be negative.
128	15	No	The name "%.*s" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
129	15	No	Fillfactor %d is not a valid percentage; fillfactor must be between 1 and 100.
130	16	No	Cannot perform an aggregate function on an expression containing an aggregate or a subquery.
131	15	No	The size (%d) given to the %S_MSG '%.*ls' exceeds the maximum allowed for any data type (%d).
132	15	No	The label '%.*ls' has already been declared. Label names must be unique within a query batch or stored procedure.
133	15	No	A GOTO statement references the label '%.*ls' but the label has not been declared.
134	15	No	The variable name '%.*ls' has already been declared. Variable names must be unique within a query batch or stored procedure.
135	15	No	Cannot use a BREAK statement outside the scope of a WHILE statement.
136	15	No	Cannot use a CONTINUE statement outside the scope of a WHILE statement.
137	15	No	Must declare the scalar variable "%.*ls".
138	15	No	Correlation clause in a subquery not permitted.
139	15	No	Cannot assign a default value to a local variable.
140	15	No	Can only use IF UPDATE within a CREATE TRIGGER statement.
141	15	No	A SELECT statement that assigns a value to a variable must not be combined with data-retrieval operations.
142	15	No	Incorrect syntax for definition of the '%ls' constraint.
143	15	No	A COMPUTE BY item was not found in the order by list. All expressions in the compute by list must also be present in the order by list.
144	15	No	Cannot use an aggregate or a subquery in an expression used for the group by list of a GROUP BY clause.
145	15	No	ORDER BY items must appear in the select list if SELECT DISTINCT is specified.
146	15	No	Could not allocate ancillary table for a subquery. Maximum number of tables in a query (%d) exceeded.
147	15	No	An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference.
148	15	No	Incorrect time syntax in time string '%.*ls' used with WAITFOR.
149	15	No	Time value '%.*ls' used with WAITFOR is not a valid value. Check date/time syntax.
150	15	No	Time value %d used with MAX_DURATION is not a valid value; MAX_DURATION wait time must be greater or equal to 0 and less or equal to %d.
151	15	No	'%.*ls' is an invalid money value.
152	15	No	The same large data placement option "%.*ls" has been specified twice.
153	15	No	Invalid usage of the option %.*ls in the %ls statement.
154	15	No	%S_MSG is not allowed in %S_MSG.
155	15	No	'%.*ls' is not a recognized %ls option.
156	15	No	Incorrect syntax near the keyword '%.*ls'.
157	15	No	An aggregate may not appear in the set list of an UPDATE statement.
158	15	No	An aggregate may not appear in the OUTPUT clause.
159	15	No	Must specify the table name and index name for the DROP INDEX statement.
160	15	No	Rule does not contain a variable.
161	15	No	Rule contains more than one variable.
162	15	No	Invalid expression in a TOP or OFFSET clause.
163	15	No	The compute by list does not match the order by list.
164	15	No	Each GROUP BY expression must contain at least one column that is not an outer reference.
165	16	No	Privilege %ls may not be granted or revoked.
166	15	No	'%ls' does not allow specifying the database name as a prefix to the object name.
167	15	No	Cannot create %S_MSG on a temporary object.
168	15	No	The floating point value '%.*ls' is out of the range of computer representation (%d bytes).
169	15	No	A column has been specified more than once in the order by list. Columns in the order by list must be unique.
171	15	No	Browse mode cannot be used with INSERT, SELECT INTO, or UPDATE statements.
172	15	No	Cannot use HOLDLOCK in browse mode.
173	15	No	The definition for column '%.*ls' must include a data type.
174	15	No	The %.*ls function requires %d argument(s).
175	15	No	An aggregate may not appear in a computed column expression or check constraint.
176	15	No	The FOR BROWSE clause is no longer supported in views.
177	15	No	The IDENTITY function can only be used when the SELECT statement has an INTO clause.
178	15	No	A RETURN statement with a return value cannot be used in this context.
179	15	No	Cannot use the OUTPUT option when passing a constant to a stored procedure.
180	15	No	There are too many parameters in this %ls statement. The maximum number is %d.
181	15	No	Cannot use the OUTPUT option in a DECLARE, CREATE AGGREGATE or CREATE FUNCTION statement.
182	15	No	Table and column names must be supplied for the READTEXT or WRITETEXT utility.
183	15	No	The scale (%d) for column '%.*ls' must be within the range %d to %d.
184	16	No	DEFAULT cannot be specified more than once for filegroups of the same content type.
185	15	No	Data stream is invalid for WRITETEXT statement in bulk form.
186	15	No	Data stream missing from WRITETEXT statement.
187	16	No	The valid range for MAX_QUEUE_READERS is 0 to 32767.
188	15	No	Cannot specify a log file in a CREATE DATABASE statement without also specifying at least one data file.
189	15	No	The %ls function requires %d to %d arguments.
190	15	No	An invalid date or time was specified in the statement.
191	15	No	Some part of your SQL statement is nested too deeply. Rewrite the query or break it up into smaller queries.
192	16	No	The scale must be less than or equal to the precision.
193	15	No	The object or column name starting with '%.*ls' is too long. The maximum length is %d characters.
194	15	No	A SELECT INTO statement cannot contain a SELECT statement that assigns values to a variable.
195	15	No	'%.*ls' is not a recognized %S_MSG.
196	15	No	SELECT INTO must be the first query in a statement containing a UNION, INTERSECT or EXCEPT operator.
197	15	No	EXECUTE cannot be used as a source when inserting into a table variable.
198	15	No	Browse mode is invalid for statements containing a UNION, INTERSECT or EXCEPT operator.
199	15	No	An INSERT statement cannot contain a SELECT statement that assigns values to a variable.
201	16	No	Procedure or function '%.*ls' expects parameter '%.*ls', which was not supplied.
202	16	No	Invalid type '%s' for WAITFOR. Supported data types are CHAR/VARCHAR, NCHAR/NVARCHAR, and DATETIME. WAITFOR DELAY supports the INT and SMALLINT data types.
203	16	No	The name '%.*ls' is not a valid identifier.
204	20	Yes	Normalization error in node %ls.
205	16	No	All queries combined using a UNION, INTERSECT or EXCEPT operator must have an equal number of expressions in their target lists.
206	16	No	Operand type clash: %ls is incompatible with %ls
207	16	No	Invalid column name '%.*ls'.
208	16	No	Invalid object name '%.*ls'.
209	16	No	Ambiguous column name '%.*ls'.
210	16	No	Conversion failed when converting datetime from binary/varbinary string.
211	23	Yes	Corruption in database ID %I64d, object ID %ld possibly due to schema or catalog inconsistency. Run DBCC CHECKCATALOG.
212	16	No	Expression result length exceeds the maximum. %d max, %d found.
213	16	No	Column name or number of supplied values does not match table definition.
214	16	No	Procedure expects parameter '%ls' of type '%ls'.
215	16	No	Parameters supplied for object '%.*ls' which is not a function. If the parameters are intended as a table hint, a WITH keyword is required.
216	16	No	Parameters were not supplied for the function '%.*ls'.
217	16	No	Maximum stored procedure, function, trigger, or view nesting level exceeded (limit %d).
218	16	No	Could not find the type '%.*ls'. Either it does not exist or you do not have the necessary permission.
219	16	No	The type '%.*ls' already exists, or you do not have permission to create it.
220	16	No	Arithmetic overflow error for data type %ls, value = %ld.
221	10	No	FIPS Warning: Implicit conversion from %ls to %ls.
222	16	No	The base type "%.*ls" is not a valid base type for the alias data type.
223	11	No	Object ID %ld specified as a default for table ID %ld, column ID %d is missing or not of type default.
224	11	No	Object ID %ld specified as a rule for table ID %ld, column ID %d is missing or not of type default.
225	16	No	The parameters supplied for the %ls "%.*ls" are not valid.
226	16	No	%ls statement not allowed within multi-statement transaction.
227	15	No	"%.*ls" is not a valid function, property, or field.
228	15	No	Method '%.*ls' of type '%.*ls' in assembly '%.*ls' does not return any value.
229	14	No	The %ls permission was denied on the object '%.*ls', database '%.*ls', schema '%.*ls'.
230	14	No	The %ls permission was denied on the column '%.*ls' of the object '%.*ls', database '%.*ls', schema '%.*ls'.
231	11	No	No such default. ID = %ld, database ID = %d.
232	16	No	Arithmetic overflow error for type %ls, value = %f.
233	16	No	The column '%.*ls' in table '%.*ls' cannot be null.
234	16	No	There is insufficient result space to convert a money value to %ls.
235	16	No	Cannot convert a char value to money. The char value has incorrect syntax.
236	16	No	The conversion from char data type to money resulted in a money overflow error.
237	16	No	There is insufficient result space to convert a money value to %ls.
239	16	No	Duplicate common table expression name '%.*ls' was specified.
240	16	No	Types don't match between the anchor and the recursive part in column "%.*ls" of recursive query "%.*ls".
241	16	No	Conversion failed when converting date and/or time from character string.
242	16	No	The conversion of a %ls data type to a %ls data type resulted in an out-of-range value.
243	16	No	Type %.*ls is not a defined system type.
244	16	No	The conversion of the %ls value '%.*ls' overflowed an %hs column. Use a larger integer column.
245	16	No	Conversion failed when converting the %ls value '%.*ls' to data type %ls.
246	16	No	No anchor member was specified for recursive query "%.*ls".
247	16	No	An anchor member was found in the recursive part of recursive query "%.*ls".
248	16	No	The conversion of the %ls value '%.*ls' overflowed an int column.
249	16	No	The type "%ls" is not comparable. It cannot be used in the %ls clause.
251	16	No	Could not allocate ancillary table for query optimization. Maximum number of tables in a query (%d) exceeded.
252	16	No	Recursive common table expression '%.*ls' does not contain a top-level UNION ALL operator.
253	16	No	Recursive member of a common table expression '%.*ls' has multiple recursive references.
254	16	No	Prefixed columns are not allowed in the column list of a PIVOT operator.
255	16	No	Pseudocolumns are not allowed in the column list of a PIVOT operator.
256	16	No	The data type %ls is invalid for the %ls function. Allowed types are: char/varchar, nchar/nvarchar, and binary/varbinary.
257	16	No	Implicit conversion from data type %ls to %ls is not allowed. Use the CONVERT function to run this query.
258	15	No	Cannot call methods on %ls.
259	16	No	Ad hoc updates to system catalogs are not allowed.
260	16	No	Disallowed implicit conversion from data type %ls to data type %ls, table '%.*ls', column '%.*ls'. Use the CONVERT function to run this query.
261	16	No	'%.*ls' is not a recognized function.
262	16	No	%ls permission denied in database '%.*ls'.
263	16	No	Must specify table to select from.
264	16	No	The column name '%.*ls' is specified more than once in the SET clause or column list of an INSERT. A column cannot be assigned more than one value in the same clause. Modify the clause to make sure that a column is updated only once. If this statement updates or inserts columns into a view, column aliasing can conceal the duplication in your code.
265	16	No	The column name "%.*ls" specified in the %ls operator conflicts with the existing column name in the %ls argument.
266	16	No	Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = %ld, current count = %ld.
267	16	No	Object '%.*ls' cannot be found.
268	16	No	Cannot run SELECT INTO in this database. The database owner must run sp_dboption to enable this option.
270	16	No	Object '%.*ls' cannot be modified.
271	16	No	The column "%.*ls" cannot be modified because it is either a computed column or is the result of a UNION operator.
272	16	No	Cannot update a timestamp column.
273	16	No	Cannot insert an explicit value into a timestamp column. Use INSERT with a column list to exclude the timestamp column, or insert a DEFAULT into the timestamp column.
275	16	No	Prefixes are not allowed in value or pivot columns of an UNPIVOT operator.
276	16	No	Pseudocolumns are not allowed as value or pivot columns of an UNPIVOT operator.
277	16	No	The column "%.*ls" is specified multiple times in the column list of the UNPIVOT operator.
278	16	No	The text, ntext, and image data types cannot be used in a GROUP BY clause.
279	16	No	The text, ntext, and image data types are invalid in this subquery or aggregate expression.
280	16	No	Only base table columns are allowed in the TEXTPTR function.
281	16	No	%d is not a valid style number when converting from %ls to a character string.
282	10	No	The '%.*ls' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be returned instead.
283	16	No	READTEXT cannot be used on inserted or deleted tables within an INSTEAD OF trigger.
284	16	No	Rules cannot be bound to text, ntext, or image data types.
285	16	No	The READTEXT, WRITETEXT, and UPDATETEXT statements cannot be used with views or functions.
286	16	No	The logical tables INSERTED and DELETED cannot be updated.
287	16	No	The %ls statement is not allowed within a trigger.
288	16	No	The PATINDEX function operates on char, nchar, varchar, nvarchar, text, and ntext data types only.
289	16	No	Cannot construct data type %ls, some of the arguments have values which are not valid.
290	16	No	Invalid EXECUTE statement using object "%ls", method "%ls".
291	16	No	CAST or CONVERT: invalid attributes specified for type '%.*ls'
292	16	No	There is insufficient result space to convert a smallmoney value to %ls.
293	16	No	Cannot convert char value to smallmoney. The char value has incorrect syntax.
294	16	No	The conversion from char data type to smallmoney data type resulted in a smallmoney overflow error.
295	16	No	Conversion failed when converting character string to smalldatetime data type.
296	16	No	The conversion of char data type to smalldatetime data type resulted in an out-of-range smalldatetime value.
297	16	No	The user does not have permission to perform this action.
298	16	No	The conversion from datetime data type to smalldatetime data type resulted in a smalldatetime overflow error.
300	14	No	%ls permission was denied on object '%.*ls', database '%.*ls'.
301	16	No	Query contains an outer-join request that is not permitted.
302	16	No	The newsequentialid() built-in function can only be used in a DEFAULT expression for a column of type 'uniqueidentifier' in a CREATE TABLE or ALTER TABLE statement. It cannot be combined with other operators to form a complex scalar expression.
303	16	No	The table '%.*ls' is an inner member of an outer-join clause. This is not allowed if the table also participates in a regular join clause.
304	16	No	'%I64d' is out of range for index/statistics option '%.*ls'. See sp_configure option '%ls' for valid values.
305	16	No	The XML data type cannot be compared or sorted, except when using the IS NULL operator.
306	16	No	The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator.
307	16	No	Index ID %d on table '%.*ls' (specified in the FROM clause) does not exist.
308	16	No	Index '%.*ls' on table '%.*ls' (specified in the FROM clause) does not exist.
309	16	No	Cannot use index "%.*ls" on table "%.*ls" in a hint. XML indexes are not allowed in hints.
310	15	No	The value %d specified for the MAXRECURSION option exceeds the allowed maximum of %d.
311	16	No	Cannot use text, ntext, or image columns in the 'inserted' and 'deleted' tables.
312	16	No	Cannot reference text, ntext, or image columns in a filter stored procedure.
313	16	No	An insufficient number of arguments were supplied for the procedure or function %.*ls.
314	16	No	Cannot use GROUP BY ALL with the special tables INSERTED or DELETED.
315	16	No	Index "%.*ls" on table "%.*ls" (specified in the FROM clause) is disabled or resides in a filegroup which is not online.
316	16	No	The index ID %d on table "%.*ls" (specified in the FROM clause) is disabled or resides in a filegroup which is not online.
317	16	No	Table-valued function '%.*ls' cannot have a column alias.
318	16	No	The table (and its columns) returned by a table-valued method need to be aliased.
319	16	No	Incorrect syntax near the keyword 'with'. If this statement is a common table expression, an xmlnamespaces clause or a change tracking context clause, the previous statement must be terminated with a semicolon.
320	16	No	The compile-time variable value for '%.*ls' in the OPTIMIZE FOR clause must be a literal.
321	15	No	"%.*ls" is not a recognized table hints option.
322	15	No	The variable "%.*ls" is specified in the OPTIMIZE FOR clause, but is not used in the query.
323	16	No	The 'COMPUTE' clause is not allowed in a statement containing an INTERSECT or EXCEPT operator.
324	15	No	The 'ALL' version of the %.*ls operator is not supported.
325	15	No	Incorrect syntax near '%.*ls'. You may need to set the compatibility level of the current database to a higher value to enable this feature. See help for the SET COMPATIBILITY_LEVEL option of ALTER DATABASE.
326	16	No	Multi-part identifier '%.*ls' is ambiguous. Both columns '%.*ls' and '%.*ls' exist.
327	16	No	Function call '%.*ls' is ambiguous: both a user-defined function and a method call with this name exist.
328	16	No	A cursor plan could not be generated for the given statement because the textptr() function was used on a LOB column from one of the base tables.
329	16	No	Each GROUP BY expression must contain at least one column reference.
330	15	No	The target '%.*ls' of the OUTPUT INTO clause cannot be a view or common table expression.
331	15	No	The target table '%.*ls' of the OUTPUT INTO clause cannot have any enabled triggers.
332	15	No	The target table '%.*ls' of the OUTPUT INTO clause cannot be on either side of a (primary key, foreign key) relationship. Found reference constraint '%ls'.
333	15	No	The target table '%.*ls' of the OUTPUT INTO clause cannot have any enabled check constraints or any enabled rules. Found check constraint or rule '%ls'.
334	15	No	The target table '%.*ls' of the DML statement cannot have any enabled triggers if the statement contains an OUTPUT clause without INTO clause.
335	16	No	Function call cannot be used to match a target table in the FROM clause of a DELETE or UPDATE statement. Use function name '%.*ls' without parameters instead.
336	15	No	Incorrect syntax near '%.*ls'. If this is intended to be a common table expression, you need to explicitly terminate the previous statement with a semi-colon.
337	10	No	Warning: the floating point value '%.*ls' is too small. It will be interpreted as 0.
338	16	No	READEXT, WRITETEXT, and UPDATETEXT statements cannot be used with views, remote tables, and inserted or deleted tables inside triggers.
339	16	No	DEFAULT or NULL are not allowed as explicit identity values.
340	16	No	Cannot create the trigger "%.*ls" on view "%.*ls". AFTER triggers cannot be created on views.
341	16	No	Replication filter procedures may not contain columns of large object, large value, XML or CLR type.
342	16	No	Column "%.*ls" is not allowed in this context, and the user-defined function or aggregate "%.*ls" could not be found.
343	15	No	Unknown object type '%.*ls' used in a CREATE, DROP, or ALTER statement.
344	16	No	Remote function reference '%.*ls' is not allowed, and the column name '%.*ls' could not be found or is ambiguous.
345	16	No	Function '%.*ls' is not allowed in the OUTPUT clause, because it performs user or system data access, or is assumed to perform this access. A function is assumed by default to perform data access if it is not schemabound.
346	15	No	The parameter "%.*ls" can not be declared READONLY since it is not a table-valued parameter.
347	16	No	The table-valued parameter "%.*ls" cannot be declared as an OUTPUT parameter.
348	16	No	The table variable "%.*ls" can not be passed to a stored procedure with the OUTPUT option.
349	16	No	The procedure "%.*ls" has no parameter named "%.*ls".
350	16	No	The column "%.*ls" does not have a valid data type. A column cannot be of a user-defined table type.
351	16	No	Column, parameter, or variable %.*ls. : Cannot find data type %.*ls.
352	15	No	The table-valued parameter "%.*ls" must be declared with the READONLY option.
353	16	No	Function '%.*ls' is not allowed in the %S_MSG clause when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement. This is because the function performs user or system data access, or is assumed to perform this access. By default, a function is assumed to perform data access if it is not schema-bound.
354	16	No	The target '%.*ls' of the INSERT statement cannot be a view or common table expression when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
355	16	No	The target table '%.*ls' of the INSERT statement cannot have any enabled triggers when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
356	16	No	The target table '%.*ls' of the INSERT statement cannot be on either side of a (primary key, foreign key) relationship when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement. Found reference constraint '%ls'.
357	16	No	The target table '%.*ls' of the INSERT statement cannot have any enabled rules when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement. Found rule '%ls'.
358	16	No	The target table '%.*ls' of the MERGE statement cannot have any enabled rules. Found rule '%ls'.
359	16	No	The target '%.*ls' of an OUTPUT INTO clause has an index with the ignore_dup_key option and cannot be used when an OUTPUT clause is also used.
360	16	No	The target column list of an INSERT, UPDATE, or MERGE statement cannot contain both a sparse column and the column set that contains the sparse column. Rewrite the statement to include either the sparse column or the column set, but not both.
361	16	No	The number of target columns that are specified in an INSERT, UPDATE, or MERGE statement exceeds the maximum of %d. This total number includes identity, timestamp, and columns that have default values. To correct this error, change the query to target a sparse column set instead of single sparse columns.
362	16	No	The query processor could not produce a query plan because the name '%.*ls' in the FORCESEEK hint on table or view '%.*ls' did not match the key column names of the index '%.*ls'.
363	16	No	The query processor could not produce a query plan because the FORCESEEK hint on table or view '%.*ls' cannot be used with the %S_MSG specified by index '%.*ls'.
364	16	No	The query processor could not produce a query plan because the FORCESEEK hint on view '%.*ls' is used without a NOEXPAND hint. Resubmit the query with the NOEXPAND hint or remove the FORCESEEK hint on the view.
365	16	No	The query processor could not produce a query plan because the FORCESEEK hint on table or view '%.*ls' specified more seek columns than the number of key columns in index '%.*ls'.
366	16	No	The query processor could not produce a query plan because the FORCESEEK hint on table or view '%.*ls' cannot be used with the column store index '%.*ls'.
367	16	No	The hint '%.*ls' is valid only with memory optimized tables.
368	14	No	The external policy action '%.*ls' was denied on the requested resource.
369	16	No	This operation is not supported on Windows Azure SQL Database with the TRCFLG_AUTO_PARTITION_REPLICATE traceflag turned on.
371	14	No	The user does not have the external policy action '%ls' or permission '%.*ls' to perform this action.
372	14	No	External access policies needed to validate access are either expired or not found. To force a policy fetch, execute the procedure 'sys.sp_external_policy_refresh'. If the error persists, please check provided errors related to external access policy fetch.
373	14	No	The %ls permission or external policy action '%ls' was denied on the object '%.*ls', database '%.*ls', schema '%.*ls'.
374	14	No	The Babylon engine could not be initialized.
401	16	No	Unimplemented statement or expression %ls.
402	16	No	The data types %s and %s are incompatible in the %s operator.
403	16	No	Invalid operator for data type. Operator equals %ls, type equals %ls.
404	16	No	The column reference "%ls.%.*ls" is not allowed because it refers to a base table that is not being modified in this statement.
405	16	No	A remote table cannot be used as a DML target in a statement which includes an OUTPUT clause or a nested DML statement.
406	16	No	%ls cannot be used in the PIVOT operator because it is not invariant to NULLs.
407	16	No	Internal error. The string routine in file %hs, line %d failed with HRESULT 0x%x.
408	16	No	A constant expression was encountered in the ORDER BY list, position %i.
411	16	No	COMPUTE clause #%d, aggregate expression #%d is not in the select list.
412	16	No	The column "%.*ls" is not updatable because it is derived or constant.
413	16	No	Correlated parameters or sub-queries are not supported by the inline function "%.*ls".
414	16	No	UPDATE is not allowed because the statement updates view "%.*ls" which participates in a join and has an INSTEAD OF UPDATE trigger.
415	16	No	DELETE is not allowed because the statement updates view "%.*ls" which participates in a join and has an INSTEAD OF DELETE trigger.
416	16	No	The service queue "%.*ls" cannot be directly updated.
417	16	No	TOP is not allowed in an UPDATE or DELETE statement against a partitioned view.
418	16	No	Objects exposing CLR type columns are not allowed in distributed queries. Use a pass-through query to access the remote object '%.*ls'.
421	16	No	The %ls data type cannot be selected as DISTINCT because it is not comparable.
422	16	No	Common table expression defined but not used.
423	16	No	Xml data type methods are not supported in check constraints. Create a scalar user-defined function to wrap the method invocation. The error occurred at table "%.*ls".
424	16	No	Xml data type methods are not supported in computed column definitions of table variables and return tables of table-valued functions. The error occurred at column "%.*ls", table "%.*ls", in the %ls statement.
425	16	No	Data type %ls of receiving variable is not equal to the data type %ls of column '%.*ls'.
426	16	No	The length %d of the receiving variable is less than the length %d of the column '%.*ls'.
427	20	Yes	Could not load the definition for constraint ID %d in database ID %d. Run DBCC CHECKCATALOG to verify the integrity of the database.
428	16	No	Insert bulk cannot be used in a multi-statement batch.
432	16	No	Xml data type methods are not supported in check constraints anymore. Please drop the constraint or create a scalar user-defined function to wrap the method invocation. The error occurred at table "%.*ls".
434	16	No	Function '%ls' is not allowed in the OUTPUT clause.
435	16	No	Xml data type methods are not supported in computed column definitions. Create a scalar user-defined function to wrap the method invocation. The error occurred at column "%.*ls", table "%.*ls", in the %ls statement.
438	16	No	Xml data type methods are not allowed in rules. The error occurred at table "%.*ls".
440	16	No	Internal query compilation error. The stack overflow could not be handled.
441	16	No	Cannot use the '%ls' function on a remote data source.
442	16	No	The NEST argument must be a column reference. Expressions are not allowed.
443	16	No	Invalid use of a side-effecting operator '%s' within a function.
444	16	No	Select statements included within a function cannot return data to a client.
445	16	No	COLLATE clause cannot be used on expressions containing a COLLATE clause.
446	16	No	Cannot resolve collation conflict between "%ls" and "%ls" in %ls operator for %ls operation.
447	16	No	Expression type %ls is invalid for COLLATE clause.
448	16	No	Invalid collation '%.*ls'.
449	16	No	Collation conflict caused by collate clauses with different collation '%.*ls' and '%.*ls'.
450	16	No	Code page translations are not supported for the text data type. From: %d To: %d.
451	16	No	Cannot resolve collation conflict between "%ls" and "%ls" in %ls operator occurring in %ls statement column %d.
452	16	No	COLLATE clause cannot be used on user-defined data types.
453	16	No	Collation '%.*ls' is supported on Unicode data types only and cannot be set at the database or server level.
454	16	No	The UNNEST argument must be a nested table column.
455	16	No	The last statement included within a function must be a return statement.
456	16	No	Implicit conversion of %ls value to %ls cannot be performed because the resulting collation is unresolved due to collation conflict between "%ls" and "%ls" in %ls operator.
457	16	No	Implicit conversion of %ls value to %ls cannot be performed because the collation of the value is unresolved due to a collation conflict between "%ls" and "%ls" in %ls operator.
458	16	No	Cannot create the SELECT INTO target table "%.*ls" because the xml column "%.*ls" is typed with a schema collection "%.*ls" from database "%.*ls". Xml columns cannot refer to schemata across databases.
459	16	No	Collation '%.*ls' is supported on Unicode data types only and cannot be applied to char, varchar or text data types.
460	16	No	DISTINCT operator is not allowed in the recursive part of a recursive common table expression '%.*ls'.
461	16	No	The TOP or OFFSET operator is not allowed in the recursive part of a recursive common table expression '%.*ls'.
462	16	No	Outer join is not allowed in the recursive part of a recursive common table expression '%.*ls'.
463	16	No	Functions with parameters are not allowed in the recursive part of a recursive common table expression '%.*ls'.
464	16	No	Functions with side effects are not allowed in the recursive part of a recursive common table expression '%.*ls'.
465	16	No	Recursive references are not allowed in subqueries.
466	16	No	UNION operator is not allowed in the recursive part of a recursive common table expression '%.*ls'.
467	16	No	GROUP BY, HAVING, or aggregate functions are not allowed in the recursive part of a recursive common table expression '%.*ls'.
468	16	No	Cannot resolve the collation conflict between "%.*ls" and "%.*ls" in the %ls operation.
469	16	No	An explicit column list must be specified for target table '%.*ls' when table hint KEEPIDENTITY is used and the table contains an identity column.
470	16	No	The synonym "%.*ls" referenced synonym "%.*ls". Synonym chaining is not allowed.
471	16	No	Only one of the three options, SINGLE_BLOB, SINGLE_CLOB or SINGLE_NCLOB, can be specified.
472	16	No	Either a format file or one of the three options SINGLE_BLOB, SINGLE_CLOB, or SINGLE_NCLOB must be specified.
473	16	No	The incorrect value "%.*ls" is supplied in the PIVOT operator.
474	16	No	Unable to load the computed column definitions for table "%.*ls".
475	16	No	Invalid SAMPLE clause. Only table names in the FROM clause of SELECT, UPDATE, and DELETE queries may be sampled.
476	16	No	Invalid PERCENT tablesample size "%f" for table "%.*ls". The PERCENT tablesample size must be between 0 and 100.
477	16	No	Invalid ROWS value or REPEATABLE seed in the TABLESAMPLE clause for table "%.*ls". The value or seed must be an integer.
478	16	No	The TABLESAMPLE clause cannot be used in a view definition or inline table function definition.
479	16	No	Invalid ROWS value or REPEATABLE seed "%I64d" in the TABLESAMPLE clause for table "%.*ls". The value or seed must be greater than 0.
480	16	No	The TABLESAMPLE clause cannot be used with the table function "%.*ls".
481	16	No	The TABLESAMPLE clause cannot be used with the linked server table "%.*ls".
482	16	No	Non-constant or invalid expression is in the TABLESAMPLE or the REPEATABLE clause.
483	16	No	The OUTPUT clause cannot be used in an INSERT...EXEC statement.
484	16	No	Cannot declare more than %d local variables.
485	16	No	Views and inline functions cannot return xml columns that are typed with a schema collection registered in a database other than current. Column "%.*ls" is typed with the schema collection "%.*ls", which is registered in database "%.*ls".
486	16	No	"%.*ls" does not allow specifying a schema name as a prefix to the assembly name.
487	16	No	An invalid option was specified for the statement "%.*ls".
488	16	No	%s columns must be comparable. The type of column "%.*ls" is "%s", which is not comparable.
489	16	No	The OUTPUT clause cannot be specified because the target view "%.*ls" is a partitioned view.
490	16	No	The resync functionality is temporarily disabled.
491	16	No	A correlation name must be specified for the bulk rowset in the from clause.
492	16	No	Duplicate column names are not allowed in result sets obtained through OPENQUERY and OPENROWSET. The column name "%.*ls" is a duplicate.
493	16	No	The column '%.*ls' that was returned from the nodes() method cannot be used directly. It can only be used with one of the four XML data type methods, exist(), nodes(), query(), and value(), or in IS NULL and IS NOT NULL checks.
494	16	No	The TABLESAMPLE clause can only be used with local tables.
495	16	No	The return table column "%.*ls" is not the same type as the type it was created with. Drop and recreate the module using a two-part name for the type, or use sp_refreshsqlmodule to refresh its parameters metadata.
496	16	No	The parameter "%.*ls" is not the same type as the type it was created with. Drop and recreate the module using a two-part name for the type, or use sp_refreshsqlmodule to refresh its parameters metadata.
497	16	No	Variables are not allowed in the TABLESAMPLE or REPEATABLE clauses.
498	16	No	Invalid value in the TABLESAMPLE or the REPEATABLE clause.
499	16	No	Invalid parameter for the getchecksum function.
500	16	No	Trying to pass a table-valued parameter with %d column(s) where the corresponding user-defined table type requires %d column(s).
502	16	Yes	The SQL Debugging Interface (SDI) requires that SQL Server, when started as a service, must not log on as System Account. Reset to log on as user account using Control Panel.
503	16	Yes	Unable to send symbol information to debugger on %ls for connection %d. Debugging disabled.
504	16	Yes	Unable to connect to debugger on %ls (Error = 0x%08x). Ensure that client-side components, such as SQLDBREG.EXE, are installed and registered on %.*ls. Debugging disabled for connection %d.
505	16	No	The current user account was invoked with SETUSER or SP_SETAPPROLE. Changing databases is not allowed.
506	16	No	The invalid escape character "%.*ls" was specified in a %ls predicate.
507	16	No	Invalid argument for SET ROWCOUNT. Must be a non-null non-negative integer.
508	16	Yes	Unable to connect to debugger on %ls (Error = 0x%08x). Ensure that client-side components, such as SQLLE.DLL, are installed and registered on %.*ls. Debugging disabled for connection %d.
509	11	No	User name '%.*ls' not found.
510	16	No	Cannot create a worktable row larger than allowable maximum. Resubmit your query with the ROBUST PLAN hint.
511	16	No	Cannot create a row of size %d which is greater than the allowable maximum row size of %d.
512	16	No	Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
513	16	No	A column insert or update conflicts with a rule imposed by a previous CREATE RULE statement. The statement was terminated. The conflict occurred in database '%.*ls', table '%.*ls', column '%.*ls'.
514	16	Yes	Unable to communicate with debugger on %ls (Error = 0x%08x). Debugging disabled for connection %d.
515	16	No	Cannot insert the value NULL into column '%.*ls', table '%.*ls'; column does not allow nulls. %ls fails.
516	16	Yes	Attempt to initialize OLE DB library failed. Check for correct versions of OLE DB DLLs on this computer.
517	16	No	Adding a value to a '%ls' column caused an overflow.
518	16	No	Cannot convert data type %ls to %ls.
520	16	No	SQL Server no longer supports version %d of the SQL Debugging Interface (SDI).
521	10	No	Cannot load the DLL %ls, or one of the DLLs it references. Reason: %ls Please insure server-side SQL debugger components are installed.
522	16	No	The WAITFOR thread was evicted.
523	16	No	A trigger returned a resultset and/or was running with SET NOCOUNT OFF while another outstanding result set was active.
524	16	No	A trigger returned a resultset and the server option 'disallow results from triggers' is true.
525	16	No	The column that was returned from the nodes() method cannot be converted to the data type %ls. It can only be used with one of the four XML data type methods, exist(), nodes(), query(), and value(), or in IS NULL and IS NOT NULL checks.
526	16	No	%ls of XML types constrained by different XML schema collections and/or DOCUMENT/CONTENT option is not allowed. Use the CONVERT function to run this query.
527	16	No	Implicit conversion between XML types constrained by different XML schema collections is not allowed. Use the CONVERT function to run this query.
529	16	No	Explicit conversion from data type %ls to %ls is not allowed.
530	16	No	The statement terminated. The maximum recursion %d has been exhausted before statement completion.
531	10	No	Cannot set NOCOUNT to OFF inside the trigger execution because the server option "disallow_results_from_triggers" is true or we are inside LOGON trigger execution.
532	16	No	The timestamp (changed to %S_TS) shows that the row has been updated by another user.
533	15	No	Cannot set XACT ABORT to OFF inside the trigger execution.
534	16	No	'%.*ls' failed because it is not supported in the edition of this SQL Server instance '%.*ls'. See books online for more details on feature support in different SQL Server editions.
535	16	No	The %.*ls function resulted in an overflow. The number of dateparts separating two date/time instances is too large. Try to use %.*ls with a less precise datepart.
536	16	No	Invalid length parameter passed to the %ls function.
537	16	No	Invalid length parameter passed to the LEFT or SUBSTRING function.
539	16	No	Schema changed after the target table was created. Rerun the Select Into query.
540	16	Yes	There is insufficient system memory to run RAISERROR.
541	16	No	There is not enough stack to execute the statement
542	16	No	An invalid datetime value was encountered. Value exceeds the year 9999.
543	16	No	Creation of a return table failed for the table valued function '%.*ls'.
544	16	No	Cannot insert explicit value for identity column in table '%.*ls' when IDENTITY_INSERT is set to OFF.
545	16	No	Explicit value must be specified for identity column in table '%.*ls' either when IDENTITY_INSERT is set to ON or when a replication user is inserting into a NOT FOR REPLICATION identity column.
547	16	No	The %ls statement conflicted with the %ls constraint "%.*ls". The conflict occurred in database "%.*ls", table "%.*ls"%ls%.*ls%ls.
548	16	No	The insert failed. It conflicted with an identity range check constraint in database '%.*ls', replicated table '%.*ls'%ls%.*ls%ls. If the identity column is automatically managed by replication, update the range as follows: for the Publisher, execute sp_adjustpublisheridentityrange; for the Subscriber, run the Distribution Agent or the Merge Agent.
549	16	No	The collation '%.*ls' of receiving variable is not equal to the collation '%.*ls' of column '%.*ls'.
550	16	No	The attempted insert or update failed because the target view either specifies WITH CHECK OPTION or spans a view that specifies WITH CHECK OPTION and one or more rows resulting from the operation did not qualify under the CHECK OPTION constraint.
551	16	No	The checksum has changed to %d. This shows that the row has been updated by another user.
552	16	No	CryptoAPI function '%ls' failed. Error 0x%x: %ls
555	16	No	User-defined functions are not yet enabled.
556	16	No	INSERT EXEC failed because the stored procedure altered the schema of the target table.
557	16	No	Only functions and some extended stored procedures can be executed from within a function.
558	16	No	Remote function calls are not allowed within a function.
561	16	No	Failed to access file '%.*ls'
562	16	No	Failed to access file '%.*ls'. Files can be accessed only through shares
563	14	No	The transaction for the INSERT EXEC statement has been rolled back. The INSERT EXEC operation will be terminated.
564	16	No	Attempted to create a record with a fixed length of '%d'. Maximum allowable fixed length is '%d'.
565	18	No	A stack overflow occurred in the server while compiling the query. Please simplify the query.
566	21	Yes	An error occurred while writing an audit trace. SQL Server is shutting down. Check and correct error conditions such as insufficient disk space, and then restart SQL Server. If the problem persists, disable auditing by starting the server at the command prompt with the "-f" switch, and using SP_CONFIGURE.
567	16	No	File '%.*ls' is not a recognizable trace file.
568	16	No	Encountered an error or an unexpected end of trace file '%.*ls'.
569	16	No	The handle that was passed to %ls was invalid.
570	15	No	INSTEAD OF triggers do not support direct recursion. The trigger execution failed.
571	16	No	The specified attribute value for %ls is invalid.
572	16	No	Invalid regular expression "%.*ls" near the offset %d.
573	16	No	Evaluation of the regular expression is too complex: '%.*ls'.
574	16	No	%ls statement cannot be used inside a user transaction.
575	16	No	A LOGON trigger returned a resultset. Modify the LOGON trigger to not return resultsets.
576	16	No	Cannot create a row that has sparse data of size %d which is greater than the allowable maximum sparse data size of %d.
577	16	No	The value provided for the timeout is not valid. Timeout must be a valid integer between 0 and 2147483647.
578	16	No	Insert Exec not allowed in WAITFOR queries.
579	16	No	Can not execute WAITFOR query with snapshot isolation level.
582	16	No	Offset is greater than the length of the column to be updated in write.
583	16	No	Negative offset or length in write.
584	16	No	Select Into not allowed in WAITFOR queries.
585	16	No	Changing database context is not allowed when populating the resource database.
586	16	No	The prepared statement handle %d is not valid in this context. Please verify that current database, user default schema, and ANSI_NULLS and QUOTED_IDENTIFIER set options are not changed since the handle is prepared.
587	16	No	An invalid delayed CLR type fetch token is provided.
588	16	No	Multiple tasks within the session are using the same delayed CLR type fetch token at the same time.
589	16	No	This statement has attempted to access data whose access is restricted by the assembly.
590	16	No	RPC was aborted without execution.
591	16	No	%ls: The formal parameter "%ls" was defined as OUTPUT, but the actual parameter was not declared as OUTPUT.
592	16	No	Cannot find %S_MSG ID %d in database ID %d.
593	10	No	fn_trace_gettable: XML conversion of trace data for event 165 failed.
594	10	No	fn_trace_gettable: XML conversion of trace data is not supported in fiber mode.
595	16	No	Bulk Insert with another outstanding result set should be run with XACT_ABORT on.
596	16	No	Cannot continue the execution because the session is in the kill state.
597	16	No	The execution of in-proc data access is being terminated due to errors in the User Datagram Protocol (UDP).
598	16	No	An error occurred while executing CREATE/ALTER DB. Please look at the previous error for more information.
599	16	No	%.*ls: The length of the result exceeds the length limit (2GB) of the target large type.
601	12	No	Could not continue scan with NOLOCK due to data movement.
602	21	Yes	Could not find an entry for table or index with partition ID %I64d in database %d. This error can occur if a stored procedure references a dropped table, or metadata is corrupted. Drop and re-create the stored procedure, or execute DBCC CHECKDB.
603	21	Yes	Could not find an entry for table or index with object ID %d (partition ID %I64d) in database %d. This error can occur if a stored procedure references a dropped table, or metadata is corrupted. Drop and re-create the stored procedure, or execute DBCC CHECKDB.
605	21	Yes	Attempt to fetch logical page %S_PGID in database %d failed. It belongs to allocation unit %I64d not to %I64d.
606	21	Yes	Metadata inconsistency. Filegroup id %ld specified for table '%.*ls' does not exist. Run DBCC CHECKDB or CHECKCATALOG.
608	16	Yes	No catalog entry found for partition ID %I64d in database %d. The metadata is inconsistent. Run DBCC CHECKDB to check for a metadata corruption.
609	16	No	BTree is not empty when waking up on RowsetBulk.
610	16	Yes	Invalid header value from a page. Run DBCC CHECKDB to check for a data corruption.
611	16	No	Cannot insert or update a row because total variable column size, including overhead, is %d bytes more than the limit.
613	21	No	Could not find an entry for worktable rowset with partition ID %I64d in database %d.
614	16	No	Could not locate bookmark due to data movement.
615	21	Yes	Could not find database ID %d, name '%.*ls'. The database may be offline. Wait a few minutes and try again.
617	20	Yes	Descriptor for object ID %ld in database ID %d not found in the hash table during attempt to unhash it. A work table is missing an entry. Rerun the query. If a cursor is involved, close and reopen the cursor.
622	16	No	The filegroup "%.*ls" has no files assigned to it. Tables, indexes, text columns, ntext columns, and image columns cannot be populated on this filegroup until a file is added.
627	16	No	Cannot use SAVE TRANSACTION within a distributed transaction.
628	16	No	Cannot issue SAVE TRANSACTION when there is no active transaction.
647	16	No	Cannot disable %ls because a column of object id %d is collated in %ls. Please remove all references to that collation before disabling this feature.
648	16	No	Cannot disable %ls because database-default collation is %ls. Please remove all references to that collation before disabling this feature.
650	16	No	You can only specify the READPAST lock in the READ COMMITTED or REPEATABLE READ isolation levels.
651	16	No	Cannot use the %ls granularity hint on the table "%.*ls" because locking at the specified granularity is inhibited.
652	16	No	The index "%.*ls" for table "%.*ls" (RowsetId %I64d) resides on a read-only filegroup ("%.*ls"), which cannot be modified.
657	16	No	Could not disable support for %ls in database '%.*ls' because %S_MSG.
658	16	No	Could not enable support for %ls in database '%.*ls' because %S_MSG.
661	16	No	Cannot enable support for %ls in database '%.*ls' because support for %ls is enabled and both are mutually exclusive.
663	10	Yes	Wait for redo catchup for the database "%.*ls" is taking longer than "%d" seconds for the LSN "%S_LSN".
664	10	Yes	Aborting the query because it is trying to do logical revert on a readable secondary.
666	16	No	The maximum system-generated unique value for a duplicate group was exceeded for index with partition ID %I64d. Dropping and re-creating the index may resolve this; otherwise, use another clustering key.
667	16	No	The index "%.*ls" for table "%.*ls" (RowsetId %I64d) resides on a filegroup ("%.*ls") that cannot be accessed because it is offline, is being restored, or is defunct.
669	22	No	The row object is inconsistent. Please rerun the query.
670	16	No	Large object (LOB) data for table "%.*ls" resides on an offline filegroup ("%.*ls") that cannot be accessed.
671	16	No	Large object (LOB) data for table "%.*ls" resides on a read-only filegroup ("%.*ls"), which cannot be modified.
672	10	No	Failed to queue cleanup packets for orphaned rowsets in database "%.*ls". Some disk space may be wasted. Cleanup will be attempted again on database restart.
673	16	No	Failure to access row object in snapshot isolation. Error code 0x%X.
674	10	Yes	Exception occurred in destructor of RowsetNewSS 0x%p. This error may indicate a problem related to releasing pre-allocated disk blocks used during bulk-insert operations. Restart the server to resolve this problem.
675	10	Yes	Worktable with partition ID %I64d was dropped successfully after %d repeated attempts.
676	10	Yes	Error occurred while attempting to drop worktable with partition ID %I64d.
677	10	Yes	Unable to drop worktable with partition ID %I64d after repeated attempts. Worktable is marked for deferred drop. This is an informational message only. No user action is required.
678	10	Yes	Active rowset for partition ID %I64d found at the end of the batch. This error may indicate incorrect exception handling. Use the current activity window in SQL Server Management Studio or the Transact-SQL KILL statement to terminate the server process identifier (SPID) responsible for generating the error.
679	16	No	One of the partitions of index '%.*ls' for table '%.*ls'(partition ID %I64d) resides on a filegroup ("%.*ls") that cannot be accessed because it is offline, restoring, or defunct. This may limit the query result.
680	10	Yes	Error [%d, %d, %d] occurred while attempting to drop allocation unit ID %I64d belonging to worktable with partition ID %I64d.
681	16	No	Attempting to set a non-NULL-able column's value to NULL.
682	16	No	Internal error. Buffer provided to read column value is too small. Run DBCC CHECKDB to check for any corruption.
683	22	No	An internal error occurred while trying to convert between variable-length and fixed-length decimal formats. Run DBCC CHECKDB to check for any database corruption.
684	22	No	An internal error occurred while attempting to convert between compressed and uncompressed storage formats. Run DBCC CHECKDB to check for any corruption.
685	22	No	An internal error occurred while attempting to retrieve a backpointer for a heap forwarded record.
686	22	No	The maximum level of the B-Tree for rowset %I64d has been reached. SQL Server only supports upto 255 levels.
687	16	No	Cannot compress a nchar or nvarchar column that has an odd number of bytes.
688	16	No	Operation not allowed due to an active online index build.
689	16	No	Operation not allowed because of pending cleanup of online index build. Wait for cleanup to complete and re-run the operation.
691	16	Yes	An internal error occurred. Error code %X.
692	16	No	Internal error. Buffer provided to write a fixed column value is too large. Run DBCC CHECKDB to check for any corruption.
694	16	No	Internal error 0x%X. Unable to create a block blob in Azure storage.
695	16	No	Internal error. Unable to delete a block blob in Azure storage.
696	16	No	Internal error. Unable to gain access to the tombstone table. Result [%x]
697	16	No	Internal error. Unable to get a blob storage container.
698	16	No	Internal error. Unable to gain access to the blob container accessor.
699	16	No	Failure to read data expected in Azure Block Blob Storage. Error code 0x%X.
701	19	Yes	There is insufficient system memory in resource pool '%ls' to run this query.
708	10	Yes	Server is running low on virtual address space or machine is running low on virtual memory. Reserved memory used %d times since startup. Cancel query and re-run, decrease server load, or cancel other applications.
801	20	Yes	A buffer was encountered with an unexpected status of 0x%x.
802	17	No	There is insufficient memory available in the buffer pool.
803	10	Yes	simulated failure (DEBUG only)
805	10	Yes	restore pending
806	10	Yes	audit failure (a page read from disk failed to pass basic integrity checks)
807	10	Yes	(no disk or the wrong disk is in the drive)
808	10	Yes	Insufficient bytes transferred. Common causes are backup configuration, insufficient disk space, or other problems with the storage subsystem such as corruption or hardware failure. Check errorlogs/application-logs for detailed messages and correct error conditions.
821	20	Yes	Could not unhash buffer at 0x%p with a buffer page number of %S_PGID and database ID %d with HASHED status set. The buffer was not found. %S_PAGE. Contact Technical Support.
822	21	Yes	Could not start I/O operation for request %S_BLKIOPTR. Contact Technical Support.
823	24	Yes	The operating system returned error %ls to SQL Server during a %S_MSG at offset %#016I64x in file '%ls'. Additional messages in the SQL Server error log and operating system error log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
824	24	Yes	SQL Server detected a logical consistency-based I/O error: %ls. It occurred during a %S_MSG of page %S_PGID in database ID %d at offset %#016I64x in file '%ls'. Additional messages in the SQL Server error log or operating system error log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see https://go.microsoft.com/fwlink/?linkid=2252374.
825	10	Yes	A read of the file '%ls' at offset %#016I64x succeeded after failing %d time(s) with error: %ls. Additional messages in the SQL Server error log and operating system error log may provide more detail. This error condition threatens database integrity and must be corrected. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
826	10	Yes	incorrect pageid (expected %d:%d; actual %d:%d)
829	21	Yes	Database ID %d, Page %S_PGID is marked RestorePending, which may indicate disk corruption. To recover from this state, perform a restore.
830	10	No	stale page (a page read returned a log sequence number (LSN) (%u:%u:%u) that is older than the last one that was written (%u:%u:%u))
831	20	No	Unable to deallocate a kept page (database %d, page %S_PGID).
832	24	Yes	A page that should have been constant has changed (expected checksum: %08x, actual checksum: %08x, database %d, file '%ls', page %S_PGID). This usually indicates a memory failure or other hardware or OS corruption.
833	10	No	SQL Server has encountered %d occurrence(s) of I/O requests taking longer than %d seconds to complete on file [%ls] in database id %d. The OS file handle is 0x%p. The offset of the latest long I/O is: %#016I64x. The duration of the long I/O is: %I64u ms.
835	16	No	The operating system returned error %ls to SQL Server. It failed creating event for a %S_MSG at offset %#016I64x in file '%ls'. Additional messages in the SQL Server error log and operating system error log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
836	10	No	Database ID %d, stale page %S_PGID is under restoring.
844	10	No	Time out occurred while waiting for buffer latch -- type %d, bp %p, page %d:%d, stat %#x, database id: %d, allocation unit id: %I64d%ls, task 0x%p : %d, waittime %d seconds, flags 0x%I64x, owning task 0x%p. Continuing to wait. %ls
845	17	No	Time-out occurred while waiting for buffer latch type %d for page %S_PGID, database ID %d. %ls
846	10	No	A time-out occurred while waiting for buffer latch -- type %d, bp %p, page %d:%d, stat %#x, database id: %d, allocation unit Id: %I64d%ls, task 0x%p : %d, waittime %d seconds, flags 0x%I64x, owning task 0x%p. Not continuing to wait.
847	10	Yes	Timeout occurred while waiting for latch: class '%ls', id %p, type %d, Task 0x%p : %d, waittime %d seconds, flags 0x%I64x, owning task 0x%p. Continuing to wait. %ls
848	10	Yes	Using large pages in the memory manager.
849	10	Yes	Using locked pages in the memory manager.
850	10	Yes	%I64u MB of large page memory allocated.
851	10	No	the page is in an OFFLINE file which cannot be read
852	10	Yes	Using conventional memory in the memory manager.
853	10	No	Latch acquire failed due to too many concurrent latches. type %d, Task 0x%p : %d
854	10	Yes	Machine supports memory error recovery. SQL memory protection is enabled to recover from memory corruption.
855	10	Yes	Uncorrectable hardware memory corruption detected. Your system may become unstable. Please check the operating system error log for more details.
856	10	Yes	SQL Server has detected hardware memory corruption in database '%ls', file ID: %u, page ID; %u, memory address: 0x%I64x and has successfully recovered the page.
857	10	No	Buffer pool extension "%.*ls" has been initialized successfully with size is %I64d MB.
858	10	No	Failed to create buffer pool extension of size %I64d MB on path "%.*ls".
859	10	Yes	Buffer pool extension configuration "%.*ls" is in wrong format. The format should be "<extension directory>,<size in GB>".
860	10	Yes	%ls. BUF address %p. Bufno %u. Extension offset %1I64d. Error code %d. Database file id %u. Database file offset %2I64d.
861	10	Yes	Buffer pool extension size must be larger than the physical memory size %I64d MB. Buffer pool extension is not enabled.
862	10	Yes	Attempt to disable buffer pool extension when in state %ls is not allowed.
863	10	Yes	Attempt to enable buffer pool extension when in state %ls is not allowed.
864	10	Yes	Attempted to initialize buffer pool extension of size %1ld KB, but maximum allowed size is %2ld KB.
865	10	Yes	Buffer pool extension is only supported on Standard and Enterprise Editions of SQL Server.
866	10	Yes	Buffer pool extension is not supported on the %ls architecture.
867	10	No	Buffer pool extension has been disabled successfully. Deleting buffer pool extension "%.*ls".
868	10	Yes	Buffer pool extension size must be larger than the current memory allocation threshold %I64d MB. Buffer pool extension is not enabled.
869	10	Yes	Buffer pool extension "%.*ls" cannot be closed because %ld asynchronous I/Os are outstanding.
870	10	Yes	BPE feature switch is on!
871	10	Yes	Buffer pool extension size from RG Setting is %d GB (%I64d bytes).
872	10	Yes	Buffer pool extension is already enabled. No action is necessary.
873	10	Yes	Buffer pool extension is already disabled. No action is necessary.
874	10	No	Failed to initialize resilient buffer pool extension on path "%.*ls of size %I64d MB".
875	10	No	Resilient buffer pool extension "%.*ls" has been started successfully with size %I64d MB.
876	10	No	Failed to startup resilient buffer pool extension of size %I64d MB on path "%.*ls".
877	10	No	Resilient buffer pool extension "%.*ls" has been enabled successfully with size %I64d MB.
878	10	No	Failed to create resilient buffer pool extension of size %I64d MB on path "%.*ls".
879	10	No	Failed to start resilient buffer pool extension because database %d is not memory optimized.
880	10	No	Failed to startup resilient buffer pool extension because the binary version is incompatible with the persisted version.
881	10	Yes	Resilient buffer pool extension is already disabled. No action is necessary.
882	22	No	The schema of a table created by InternalBaseTable is corrupt.
883	10	No	Could not create the Write Page Recorder table: wpr_bucket_table for database %ls, inner error: %d, inner state: %d. From %ls.
885	16	Yes	An internal error occurred. Error code %X. Context: "%ls::%d".
886	10	Yes	Resilient buffer pool extension is already enabled or being enabled. No action is necessary.
887	16	No	Invalid RBPEX operation. Error: %ls.
888	16	No	Resilient buffer pool extension must be enabled while running this operation '%ls'.
889	16	No	Resilient buffer pool extension must be disabled while running this operation '%ls'.
890	10	No	Could not create, retrieve or persist a bucket for the Write Page Recorder in database %ls.
891	10	Yes	Buffer pool extension is not supported on %ls platform.
892	10	Yes	Using shared memory in the memory manager.
893	10	Yes	Failed to release latch. BUF address %p. Database ID %d. File ID %d. Page %S_PGID.
894	10	No	Buffer Pool: Allocating %I64u bytes for %I64d hashPages.
895	10	No	Hybrid buffer Pool: proposing %I64d hashPages for %I64u GiB of %S_MSG Persistent Memory.
896	10	Yes	Failed to disable buffer pool extension.
897	10	Yes	Buffer pool extension was paused due to error.
898	10	No	Buffer Pool scan took %I64d seconds: database ID %d, command '%ls', operation '%ls', scanned buffers %I64d, total iterated buffers %I64d, wait time %I64d ms. See 'https://go.microsoft.com/fwlink/?linkid=2132602' for more information.
899	10	No	Failed to disable Resilient buffer pool extension.
902	16	No	To change the %ls, the database must be in state in which a checkpoint can be executed.
904	16	No	Database %ld cannot be autostarted during server shutdown or startup.
905	21	Yes	Database '%.*ls' cannot be started in this edition of SQL Server because it contains a partition function '%.*ls'. Only Enterprise edition of SQL Server supports partitioning.
907	16	No	The database "%ls" has inconsistent database or file metadata.
908	10	Yes	Filegroup %ls in database %ls is unavailable because it is %ls. Restore or alter the filegroup to be available.
909	21	Yes	Database '%.*ls' cannot be started in this edition of SQL Server because part or all of object '%.*ls' is enabled with data compression or vardecimal storage format. Data compression and vardecimal storage format are only supported on SQL Server Enterprise Edition.
910	10	No	Database '%.*ls' is upgrading script '%.*ls' from level %d to level %d.
911	16	No	Database '%.*ls' does not exist. Make sure that the name is entered correctly.
912	21	No	Script level upgrade for database '%.*ls' failed because upgrade step '%.*ls' encountered error %d, state %d, severity %d. This is a serious error condition which might interfere with regular operation and the database will be taken offline. If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script upgrade steps run to completion.
913	22	Yes	Could not find database ID %d. Database may not be activated yet or may be in transition. Reissue the query once the database is available. If you do not think this error is due to a database that is transitioning its state and this error continues to occur, contact your primary support provider. Please have available for review the Microsoft SQL Server error log and any additional information relevant to the circumstances when the error occurred.
914	21	No	Script level upgrade for database '%.*ls' failed because upgrade step '%.*ls' was aborted before completion. If the abort happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script upgrade steps run to completion.
915	21	No	Unable to obtain the current script level for database '%.*ls'. If the error happened during startup of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that script upgrade may run to completion.
916	14	No	The server principal "%.*ls" is not able to access the database "%.*ls" under the current security context.
917	21	No	An upgrade script batch failed to execute for database '%.*ls' due to compilation error. Check the previous error message for the line which caused compilation to fail.
918	21	No	Failed to load the engine script metadata from script DLL '%.*ls'. The error code reported by the operating system was %d. This is a serious error condition, which usually indicates a corrupt or incomplete installation. Repairing the SQL Server instance may help resolve this error.
919	10	No	User '%.*ls' is changing database script level entry %d to a value of %d.
920	20	No	Only members of the sysadmin role can modify the database script level.
921	14	No	Database '%.*ls' has not been recovered yet. Wait and try again.
922	14	No	Database '%.*ls' is being recovered. Waiting until recovery is finished.
923	14	No	Database '%.*ls' is in restricted mode. Only the database owner and members of the dbcreator and sysadmin roles can access it.
924	14	No	Database '%.*ls' is already open and can only have one user at a time.
925	19	Yes	Maximum number of databases used for each query has been exceeded. The maximum allowed is %d.
926	14	No	Database '%.*ls' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
927	14	No	Database '%.*ls' cannot be opened. It is in the middle of a restore.
928	20	Yes	During upgrade, database raised exception %d, severity %d, state %d, address %p. Use the exception number to determine the cause.
929	20	Yes	Unable to close a database that is not currently open. The application should reconnect and try again. If this action does not correct the problem, contact your primary support provider.
930	21	Yes	Attempting to reference recovery unit %d in database '%ls' which does not exist. Contact Technical Support.
931	21	Yes	Attempting to reference database fragment %d in database '%ls' which does not exist. Contact Technical Support.
932	21	Yes	SQL Server cannot load database '%.*ls' because change tracking is enabled. The currently installed edition of SQL Server does not support change tracking. Either disable change tracking in the database by using a supported edition of SQL Server, or upgrade the instance to one that supports change tracking.
933	21	Yes	Database '%.*ls' cannot be started because some of the database functionality is not available in the current edition of SQL Server.
934	21	Yes	SQL Server cannot load database '%.*ls' because Change Data Capture is enabled. The currently installed edition of SQL Server does not support Change Data Capture. Either restore database without KEEP_CDC option, or upgrade the instance to one that supports Change Data Capture.
935	21	Yes	The script level for '%.*ls' in database '%.*ls' cannot be downgraded from %d to %d, which is supported by this server. This usually implies that a future database was attached and the downgrade path is not supported by the current installation. Install a newer version of SQL Server and re-try opening the database.
938	21	Yes	The target database version %d is not supported by the current code version %d. Change target version to a supported level and restart the server.
939	16	Yes	Database '%.*ls' cannot be started because it failed to initialize the persistent version store due to error %d. Refer to previous errors in the error log to identify the cause and correct any associated problems.
941	16	No	Database '%.*ls' cannot be opened because it is not started. Retry when the database is started.
942	14	No	Database '%.*ls' cannot be opened because it is offline.
943	14	No	Database '%.*ls' cannot be opened because its version (%d) is later than the current server version (%d).
944	10	No	Converting database '%.*ls' from version %d to the current version %d.
945	16	No	Database '%.*ls' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
946	14	Yes	Cannot open database '%.*ls' version %d. Upgrade the database to the latest version.
947	16	Yes	Error while closing database '%.*ls'. Check for previous additional errors and retry the operation.
948	20	Yes	The database '%.*ls' cannot be opened because it is version %d. This server supports version %d and earlier. A downgrade path is not supported.
949	16	No	tempdb is skipped. You cannot run a query that requires tempdb
950	20	Yes	Database '%.*ls' cannot be upgraded because its non-release version (%d) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database.
951	10	No	Database '%.*ls' running the upgrade step from version %d to version %d.
952	16	No	Database '%.*ls' is in transition. Try the statement later.
954	14	No	The database "%.*ls" cannot be opened. It is acting as a mirror database.
955	14	No	Database %.*ls is enabled for Database Mirroring, but the database lacks quorum: the database cannot be opened. Check the partner and witness connections if configured.
956	14	No	Database %.*ls is enabled for Database Mirroring, but has not yet synchronized with its partner. Try the operation again later.
957	17	No	Database '%.*ls' is enabled for database mirroring or has joined an availability group. The name of the database cannot be changed.
958	10	Yes	The resource database build version is %.*ls. This is an informational message only. No user action is required.
959	20	Yes	The resource database version is %d and this server supports version %d. Restore the correct version or reinstall SQL Server.
960	10	No	Warning: User "sys" (principal_id = %d) in database "%.*ls" has been renamed to "%.*ls". "sys" is a reserved user or schema name in this version of SQL Server.
961	10	No	Warning: Index "%.*ls" (index_id = %d) on object ID %d in database "%.*ls" was renamed to "%.*ls" because its name is a duplicate of another index on the same object.
962	10	No	Warning: Primary key or Unique constraint "%.*ls" (object_id = %d) in database "%.*ls" was renamed to "%.*ls" because its index was renamed.
963	10	No	Warning: Database "%.*ls" was marked suspect because of actions taken during upgrade. See errorlog or eventlog for more information. Use ALTER DATABASE to bring the database online. The database will come online in restricted_user state.
964	10	No	Warning: System user '%.*ls' was found missing from database '%.*ls' and has been restored. This user is required for SQL Server operation.
965	10	No	Warning: A column nullability inconsistency was detected in the metadata of index "%.*ls" (index_id = %d) on object ID %d in database "%.*ls". The index may be corrupt. Run DBCC CHECKTABLE to verify consistency.
966	10	No	Warning: Assembly "%.*ls" in database "%.*ls" has been renamed to "%.*ls" because the name of the assembly conflicts with a system assembly in this version of SQL Server.
967	10	No	Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the XML data bound to it may contain negative values for xs:date and xs:dateTime which are not longer supported.
968	10	No	Warning: The XML facet on type "%.*ls" in schema collection "%.*ls" is updated from "%.*ls" to "%.*ls" because Sql Server does not support negative years inside values of type xs:date or xs:dateTime.
969	10	No	Warning: The default or fixed value on XML element or attribute "%.*ls" in schema collection "%.*ls" is updated from "%.*ls" to "%.*ls" because Sql Server does not support negative years inside values of type xs:date or xs:dateTime.
970	10	No	Warning: The XML instances in the XML column "%.*ls.%.*ls.%.*ls" may contain negative simple type values of type xs:date or xs:dateTime. It will be impossible to run XQuery or build a primary or selective XML index on these XML instances.
971	10	No	The resource database has been detected in two different locations. Attaching the resource database in the same directory as sqlservr.exe at '%.*ls' instead of the currently attached resource database at '%.*ls'.
972	17	No	Could not use database '%d' during procedure execution.
973	10	Yes	Database %ls was started . However, FILESTREAM is not compatible with the READ_COMMITTED_SNAPSHOT and ALLOW_SNAPSHOT_ISOLATION options. Either remove the FILESTREAM files and the FILESTREAM filegroups, or set READ_COMMITTED_SNAPSHOT and ALLOW_SNAPSHOT_ISOLATION to OFF.
974	10	No	Attaching the resource database in the same directory as sqlservr.exe at '%.*ls' failed as the database files do not exist.
975	10	Yes	System objects could not be updated in database '%.*ls' because it is read-only.
976	14	No	The target database, '%.*ls', is participating in an availability group and is currently not accessible for queries. Either data movement is suspended or the availability replica is not enabled for read access. To allow read-only access to this and other databases in the availability group, enable read access to one or more secondary availability replicas in the group. For more information, see the ALTER AVAILABILITY GROUP statement in SQL Server Books Online.
977	10	No	Warning: Could not find associated index for the constraint '%.*ls' on object_id '%d' in database '%.*ls'.
978	14	No	The target database ('%.*ls') is in an availability group and is currently accessible for connections when the application intent is set to read only. For more information about application intent, see SQL Server Books Online.
979	14	No	The target database ('%.*ls') is in an availability group and currently does not allow read only connections. For more information about application intent, see SQL Server Books Online.
980	21	Yes	SQL Server cannot load database '%.*ls' because it contains a columnstore index. The currently installed edition of SQL Server does not support columnstore indexes. Either disable the columnstore index in the database by using a supported edition of SQL Server, or upgrade the instance of SQL Server to a version that supports columnstore index.
981	10	No	Database manager will be using %d target database version.
982	14	No	Unable to access the '%.*ls' database because no online secondary replicas are enabled for read-only access. Check the availability group configuration to verify that at least one secondary replica is configured for read-only access. Wait for an enabled replica to come online, and retry your read-only operation.
983	14	No	Unable to access availability database '%.*ls' because the database replica is not in the PRIMARY or SECONDARY role. Connections to an availability database is permitted only when the database replica is in the PRIMARY or SECONDARY role. Try the operation again later.
984	21	Yes	Failed to perform a versioned copy of sqlscriptdowngrade.dll from Binn to Binn\Cache folder. VerInstallFile API failed with error code %d.
985	10	Yes	Successfully installed the file '%ls' into folder '%ls'.
986	10	No	Couldn't get a clean bootpage for database '%.*ls' after %d tries. This is an informational message only. No user action is required.
987	23	Yes	A duplicate key insert was hit when updating system objects in database '%.*ls'.
988	14	No	Unable to access database '%.*ls' because it lacks a quorum of nodes for high availability. Try the operation again later.
989	16	No	Failed to take the host database with ID %d offline when one or more of its partition databases is marked as suspect.
990	16	No	Taking the host database with ID %d offline because one or more of its partition databases is marked as suspect.
991	16	No	Failed to take the host database '%.*ls' offline when one or more of its partition databases is marked as suspect.
992	16	No	Failed to get the shared lock on database '%.*ls'.
993	10	No	Redo for database '%.*ls' applied version upgrade step from %d to %d.
994	10	No	Warning: Index "%.*ls" on "%.*ls"."%.*ls" is disabled because it contains a computed column.
995	10	No	Warning: Index "%.*ls" on "%.*ls"."%.*ls" is disabled. It cannot be upgraded as it resides on a read-only filegroup.
996	10	No	Warning: Index "%.*ls" on "%.*ls"."%.*ls" is disabled. This columnstore index cannot be upgraded, likely because it exceeds the row size limit of '%d' bytes.
997	16	No	Failed to get the update lock on database '%.*ls'.
998	16	No	Database '%.*ls' does not exist in server '%.*ls'. Please make sure that the name is entered correctly.

Related content

• Database Engine events and errors
• Understanding Database Engine errors
• Cause and resolution of Database Engine errors