संपादित करें

इसके माध्यम से साझा किया गया

Performance tips for Azure Cosmos DB Python SDK

  • आलेख

APPLIES TO: NoSQL

Important

The performance tips in this article are for Azure Cosmos DB Python SDK only. Please see the Azure Cosmos DB Python SDK Readme Release notes, Package (PyPI), Package (Conda), and troubleshooting guide for more information.

Azure Cosmos DB is a fast and flexible distributed database that scales seamlessly with guaranteed latency and throughput. You do not have to make major architecture changes or write complex code to scale your database with Azure Cosmos DB. Scaling up and down is as easy as making a single API call or SDK method call. However, because Azure Cosmos DB is accessed via network calls there are client-side optimizations you can make to achieve peak performance when using Azure Cosmos DB Python SDK.

So if you're asking "How can I improve my database performance?" consider the following options:

Networking

  • Collocate clients in same Azure region for performance

When possible, place any applications calling Azure Cosmos DB in the same region as the Azure Cosmos DB database. For an approximate comparison, calls to Azure Cosmos DB within the same region complete within 1-2 ms, but the latency between the West and East coast of the US is >50 ms. This latency can likely vary from request to request depending on the route taken by the request as it passes from the client to the Azure datacenter boundary. The lowest possible latency is achieved by ensuring the calling application is located within the same Azure region as the provisioned Azure Cosmos DB endpoint. For a list of available regions, see Azure Regions.

Illustration of the Azure Cosmos DB connection policy.

An app that interacts with a multi-region Azure Cosmos DB account needs to configure preferred locations to ensure that requests are going to a collocated region.

Enable accelerated networking to reduce latency and CPU jitter

It is recommended that you follow the instructions to enable Accelerated Networking in your Windows (select for instructions) or Linux (select for instructions) Azure VM, in order to maximize performance (reduce latency and CPU jitter).

Without accelerated networking, IO that transits between your Azure VM and other Azure resources might be unnecessarily routed through a host and virtual switch situated between the VM and its network card. Having the host and virtual switch inline in the datapath not only increases latency and jitter in the communication channel, it also steals CPU cycles from the VM. With accelerated networking, the VM interfaces directly with the NIC without intermediaries; any network policy details which were being handled by the host and virtual switch are now handled in hardware at the NIC; the host and virtual switch are bypassed. Generally you can expect lower latency and higher throughput, as well as more consistent latency and decreased CPU utilization when you enable accelerated networking.

Limitations: accelerated networking must be supported on the VM OS, and can only be enabled when the VM is stopped and deallocated. The VM cannot be deployed with Azure Resource Manager. App Service has no accelerated network enabled.

Please see the Windows and Linux instructions for more details.

SDK usage

  • Install the most recent SDK

The Azure Cosmos DB SDKs are constantly being improved to provide the best performance. See the Azure Cosmos DB SDK release notes to determine the most recent SDK and review improvements.

  • Use a singleton Azure Cosmos DB client for the lifetime of your application

Each Azure Cosmos DB client instance is thread-safe and performs efficient connection management and address caching. To allow efficient connection management and better performance by the Azure Cosmos DB client, it is recommended to use a single instance of the Azure Cosmos DB client for the lifetime of the application.

  • Tune timeout and retry configurations

Timeout configurations and retry policies can be customized based on the application needs. Refer to timeout and retries configuration document to get a complete list of configurations that can be customized.

  • Use the lowest consistency level required for your application

When you create a CosmosClient, account level consistency is used if none is specified in the client creation. For more information on consistency levels, see the consistency-levels document.

  • Scale out your client-workload

If you are testing at high throughput levels, the client application might become the bottleneck due to the machine capping out on CPU or network utilization. If you reach this point, you can continue to push the Azure Cosmos DB account further by scaling out your client applications across multiple servers.

A good rule of thumb is not to exceed >50% CPU utilization on any given server, to keep latency low.

  • OS Open files Resource Limit

Some Linux systems (like Red Hat) have an upper limit on the number of open files and so the total number of connections. Run the following to view the current limits:

ulimit -a

The number of open files (nofile) needs to be large enough to have enough room for your configured connection pool size and other open files by the OS. It can be modified to allow for a larger connection pool size.

Open the limits.conf file:

vim /etc/security/limits.conf

Add/modify the following lines:

* - nofile 100000

Query operations

For query operations see the performance tips for queries.

Indexing policy

  • Exclude unused paths from indexing for faster writes

Azure Cosmos DB’s indexing policy allows you to specify which document paths to include or exclude from indexing by leveraging Indexing Paths (setIncludedPaths and setExcludedPaths). The use of indexing paths can offer improved write performance and lower index storage for scenarios in which the query patterns are known beforehand, as indexing costs are directly correlated to the number of unique paths indexed. For example, the following code shows how to include and exclude entire sections of the documents (also known as a subtree) from indexing using the "*" wildcard.

container_id = "excluded_path_container"
indexing_policy = {
        "includedPaths" : [ {'path' : "/*"} ],
        "excludedPaths" : [ {'path' : "/non_indexed_content/*"} ]
        }
db.create_container(
    id=container_id,
    indexing_policy=indexing_policy,
    partition_key=PartitionKey(path="/pk"))

For more information, see Azure Cosmos DB indexing policies.

Throughput

  • Measure and tune for lower request units/second usage

Azure Cosmos DB offers a rich set of database operations including relational and hierarchical queries with UDFs, stored procedures, and triggers – all operating on the documents within a database collection. The cost associated with each of these operations varies based on the CPU, IO, and memory required to complete the operation. Instead of thinking about and managing hardware resources, you can think of a request unit (RU) as a single measure for the resources required to perform various database operations and service an application request.

Throughput is provisioned based on the number of request units set for each container. Request unit consumption is evaluated as a rate per second. Applications that exceed the provisioned request unit rate for their container are limited until the rate drops below the provisioned level for the container. If your application requires a higher level of throughput, you can increase your throughput by provisioning additional request units.

The complexity of a query impacts how many request units are consumed for an operation. The number of predicates, nature of the predicates, number of UDFs, and the size of the source data set all influence the cost of query operations.

To measure the overhead of any operation (create, update, or delete), inspect the x-ms-request-charge header to measure the number of request units consumed by these operations.

document_definition = {
    'id': 'document',
    'key': 'value',
    'pk': 'pk'
}
document = container.create_item(
    body=document_definition,
)
print("Request charge is : ", container.client_connection.last_response_headers['x-ms-request-charge'])

The request charge returned in this header is a fraction of your provisioned throughput. For example, if you have 2000 RU/s provisioned, and if the preceding query returns 1000 1KB-documents, the cost of the operation is 1000. As such, within one second, the server honors only two such requests before rate limiting subsequent requests. For more information, see Request units and the request unit calculator.

  • Handle rate limiting/request rate too large

When a client attempts to exceed the reserved throughput for an account, there is no performance degradation at the server and no use of throughput capacity beyond the reserved level. The server will preemptively end the request with RequestRateTooLarge (HTTP status code 429) and return the x-ms-retry-after-ms header indicating the amount of time, in milliseconds, that the user must wait before reattempting the request.

HTTP Status 429,
Status Line: RequestRateTooLarge
x-ms-retry-after-ms :100

The SDKs all implicitly catch this response, respect the server-specified retry-after header, and retry the request. Unless your account is being accessed concurrently by multiple clients, the next retry will succeed.

If you have more than one client cumulatively operating consistently above the request rate, the default retry count currently set to 9 internally by the client might not suffice; in this case, the client throws a CosmosHttpResponseError with status code 429 to the application. The default retry count can be changed by passing retry_total configuration to the client. By default, the CosmosHttpResponseError with status code 429 is returned after a cumulative wait time of 30 seconds if the request continues to operate above the request rate. This occurs even when the current retry count is less than the max retry count, be it the default of 9 or a user-defined value.

While the automated retry behavior helps to improve resiliency and usability for the most applications, it might come at odds when doing performance benchmarks, especially when measuring latency. The client-observed latency will spike if the experiment hits the server throttle and causes the client SDK to silently retry. To avoid latency spikes during performance experiments, measure the charge returned by each operation and ensure that requests are operating below the reserved request rate. For more information, see Request units.

  • Design for smaller documents for higher throughput

The request charge (the request processing cost) of a given operation is directly correlated to the size of the document. Operations on large documents cost more than operations for small documents. Ideally, architect your application and workflows to have your item size be ~1KB, or similar order or magnitude. For latency-sensitive applications large items should be avoided - multi-MB documents will slow down your application.

Next steps

To learn more about designing your application for scale and high performance, see Partitioning and scaling in Azure Cosmos DB.

Trying to do capacity planning for a migration to Azure Cosmos DB? You can use information about your existing database cluster for capacity planning.