Megosztás a következőn keresztül:

Step by step guide for upgrading Active Directory from Microsoft Windows 2003 to Microsoft Windows Server 2008

  • Cikk

In this blog, I will guide you with a very simple step by step approach on how to upgrade your Active Directory from Microsoft Windows 2003 to Microsoft Windows Server 2008. Preparing your Active Directory infrastructure for upgrade to Windows Server 2008 includes the following tasks:

  • Prepare Windows Server 2003 forest schema for a domain controller that runs Windows Server 2008
  • Prepare Windows Server 2003 domain for a domain controller that runs Windows Server 2008

Note: Review the list of operations that Adprep.exe performs in Windows Server 2008, and test the schema updates in a lab environment to ensure that they will not conflict with any applications that run in your environment. There should not be any conflicts if your applications use RFC-compliant object and attribute definitions. For a list of specific operations that are performed when you update the Active Directory schema, see Appendix of Changes to Adprep.exe to support AD DS in Windows Server 2008 (https://go.microsoft.com/fwlink/?LinkID=122499).

You can also test the Active Directory upgrade in a test environment with all the applications configured for testing purposes.

 

Forest Schema preparation

Before you can add a domain controller that is running Windows Server 2008 to an Active Directory environment that is running Windows 2000 Server or Windows Server 2003, you must update the Active Directory schema. You must update the schema from the domain controller that hosts the schema operations master role (also known as flexible single master operations or FSMO). If you are performing an unattended installation of Active Directory Domain Services (AD DS) with Windows Server 2008, you must update the schema before you install the operating system. For normal installations, you must update the schema after you run Setup and before you install AD DS.

Use the following procedure to update the Windows Server 2003 Active Directory schema for Windows Server 2008.

Membership in Enterprise Admins, Schema Admins, and Domain Admins for the domain that contains the schema master is required to complete this procedure. Review details about using the appropriate accounts and group memberships at https://go.microsoft.com/fwlink/?LinkId=83477.

To prepare the forest schema for Windows Server 2008

 

  1. Log on to the schema master as a member of the Enterprise Admins, Schema Admins, and Domain Admins groups.
  2. Insert the Windows Server 2008 DVD into the CD/DVD drive. Copy the content of the \sources\adprep folder to an Adprep folder on the schema master.
  3. Open a command prompt, and then change directories to the Adprep folder.
  4. At the command prompt, type the following command, and then press ENTER:

adprep /forestprep

  1. (Optional) If you plan to install a read-only domain controller (RODC) in any domain in the forest, type the following command, and then press ENTER:

adprep /rodcprep

  1. Allow the operation to complete, and then allow the changes to replicate throughout the forest before you prepare any domains for a domain controller that runs Windows Server 2008.

 

Domain Schema preparation

After you prepare the forest, you need to prepare any domain for which you plan to install a domain controller that runs Windows Server 2008.

Use the following procedure to prepare a Windows 2000 or Windows Server 2003 domain for Windows Server 2008.

Membership in Domain Admins, or equivalent, is the minimum required to complete this procedure. Review details about using the appropriate accounts and group memberships at https://go.microsoft.com/fwlink/?LinkId=83477.

To prepare a Windows 2003 domain for Windows Server 2008

  1. Identify the domain infrastructure operations master role holder as follows:
    • In the Active Directory Users and Computers snap-in, right-click the domain object, click Operations Masters, and then click Infrastructure.
  2. Log on to the infrastructure master as a member of the Domain Admins group.
  3. Insert the Windows Server 2008 DVD into the CD/DVD drive. Copy the content of the \sources\adprep folder to an Adprep folder on the infrastructure master.
  4. Open a command prompt, and then change directories to the Adprep folder.
  5. Type the following command, and then press ENTER:

adprep /domainprep /gpprep

  1. Allow the operation to complete, and then allow the changes to replicate throughout the forest before you install a domain controller that runs Windows Server 2008.

After the forest and domain based schema is prepared, new Windows Server 2008 based domain controllers can be added to the domain.

Install Active Directory on Windows Server 2008

Install Active Directory Domain Services (AD DS) on a Windows Server 2008–based member server that is located in the domain by using the Active Directory Domain Services Installation Wizard (Dcpromo.exe). After you install AD DS successfully, the Windows Server 2008–based member server will become a domain controller. You can install AD DS on any Windows Server 2008–based member server that meets the domain controller hardware requirements.

You can install AD DS using the Windows Server 2008 Windows interface. The Windows interface in Windows Server 2008 provides two wizards that guide you through the Active Directory Domain Services (AD DS) installation process. One wizard is the Add Roles Wizard, which you can access in Server Manager. The other wizard is the Active Directory Domain Services Installation Wizard (Dcpromo.exe), which you can access in either of the following ways:

  • When you complete the steps in the Add Roles Wizard, click the link to start the Active Directory Domain Services Installation Wizard.
  • Click Start, click Run, type dcpromo.exe, and then click OK.

Membership in the local Administrator account, or equivalent, is the minimum required to complete this procedure. Review details about using the appropriate accounts and group memberships at https://go.microsoft.com/fwlink/?LinkId=83477.

To install AD DS on a Windows Server 2008–based member server:

  1. Click Start, and then click Server Manager.
  2. In Roles Summary, click Add Roles.
  3. If necessary, review the information on the Before You Begin page, and then click Next.
  4. On the Select Server Roles page, select the Active Directory Domain Services check box, and then click Next.
  5. If necessary, review the information on the Active Directory Domain Services page, and then click Next.
  6. On the Confirm Installation Selections page, click Install.
  7. On the Installation Results page, click Close this wizard and launch the Active Directory Domain Services Installation Wizard (dcpromo.exe) .
  8. On the Welcome to the Active Directory Domain Services Installation Wizard page, click Next. If you want to install from media, or identify the source domain controller for AD DS replication as part of the installation of the additional domain controller, click Use advanced mode installation.
  9. On the Operating System Compatibility page, review the warning about the default security settings for Windows Server 2008 domain controllers, and then click Next.
  10. On the Choose a Deployment Configuration page, click Existing forest, click Add a domain controller to an existing domain, and then click Next.
  11. On the Network Credentials page, type the name of any existing domain in the forest where you plan to install the additional domain controller. Under Specify the account credentials to use to perform the installation, click My current logged on credentials or click Alternate credentials, and then click Set. In the Windows Security dialog box, provide the user name and password for an account that can install the additional domain controller. To install an additional domain controller, you must be a member of the Enterprise Admins group or the Domain Admins group. When you are finished providing credentials, click Next.
  12. On the Select a Domain page, select the domain of the new domain controller, and then click Next.
  13. On the Select a Site page, select a site from the list or select the option to install the domain controller in the site that corresponds to its IP address, and then click Next.
  14. On the Additional Domain Controller Options page, make the following selections, and then click Next:
    1. DNS server: This option is selected by default so that your domain controller can function as a DNS server.
    2. Note: If you select the option to install DNS server, you might receive a message that indicates that a DNS delegation for the DNS server could not be created and that you should manually create a DNS delegation to the DNS server to ensure reliable name resolution. If you are installing an additional domain controller in either the forest root domain or a tree root domain, you do not have to create the DNS delegation. In this case, click Yes and disregard the message.
    3. Global Catalog: This option is selected by default. It adds the global catalog, read-only directory partitions to the domain controller, and it enables global catalog search functionality.
    4. Read-only domain controller. This option is not selected by default. It makes the additional domain controller read only.
  15. If you selected Use advanced mode installation on the Welcome page, the Install from Media page appears. You can provide the location of installation media to be used to create the domain controller and configure AD DS, or you can have all the replication done over the network. Note that some data will be replicated over the network even if you install from media. For information about using this method to install the domain controller, see Installing AD DS from Media.
  16. If you selected Use advanced mode installation on the Welcome page, the Source Domain Controller page appears. Click Let the wizard choose an appropriate domain controller or click Use this specific domain controller to specify a domain controller that you want to provide as a source for replication to create the new domain controller, and then click Next. If you do not choose to install from media, all data will be replicated from this source domain controller.
  17. On the Location for Database, Log Files, and SYSVOL page, type or browse to the volume and folder locations for the database file, the directory service log files, and the system volume (SYSVOL) files, and then click Next.Windows Server Backup backs up the directory service by volume. For backup and recovery efficiency, store these files on separate volumes that do not contain applications or other nondirectory files.
  18. On the Directory Services Restore Mode Administrator Password page, type and confirm the restore mode password, and then click Next. This password must be used to start AD DS in Directory Service Restore Mode (DSRM) for tasks that must be performed offline.
  19. On the Summary page, review your selections. Click Back to change any selections, if necessary.To save the settings that you have selected to an answer file that you can use to automate subsequent Active Directory operations, click Export settings. Type the name for your answer file, and then click Save. When you are sure that your selections are accurate, click Next to install AD DS.
  20. On the Completing the Active Directory Domain Services Installation Wizard page, click Finish.
  21. You can either select the Reboot on completion check box to have the server restart automatically or you can restart the server to complete the AD DS installation when you are prompted to do so.

Comments

  • Anonymous
    January 01, 2003
    Nice Blog Omar

  • Anonymous
    January 01, 2003
    This looks to be a very complete and comprehensive checklist for upgrading from AD 2003 to AD 2008.  I have a related question as it seems that you are involved with both AD and Exchange.  I am planning an upgrade from AD 2003 to AD 2008 in the near future. My question is whether Exchange 2007 running on Server 2003 will still work under on AD 2008? At the present time I do not have the resources to purchase a new server, load it with Server 2008, and migrate Exchange to it, and would really like to leave my Exchange 2007 on the 2003 Server if at all possible.

  • Anonymous
    January 01, 2003
    Yes, that should be fine. Look at Exchange Supportability Matrix at technet.microsoft.com/.../ff728623.aspx

  • Anonymous
    January 01, 2003
    @Tony: Normally this should not happen, however take a backup before you do any upgrade.
    @Justin: You can find this on TechNet. There are many articles available like http://social.technet.microsoft.com/wiki/contents/articles/832.transferring-fsmo-roles-in-windows-server-2008.aspx

  • Anonymous
    July 11, 2012
    This is a complete document , and can be used as a good reference for upgradation Thanks

  • Anonymous
    November 19, 2013
    Nice work. Thank you for all your efforts

  • Anonymous
    December 18, 2013
    We are pleased to announce the RTM availability of version 9.0 of the Microsoft Assessment and Planning

  • Anonymous
    December 18, 2013
    I’ve written a few blog posts now that get into the deep technical details of Managed Availability. I

  • Anonymous
    December 26, 2013
    Recently I was involved in a Private Cloud project and as part of the project, we were migrating some

  • Anonymous
    January 14, 2014
    Recently, we have seen some questions about what the Update-DatabaseSchema cmdlet in Exchange 2013 is

  • Anonymous
    January 30, 2014
    This has been a great new feature added in Windows Server 2012 R2. The possible scenario of the usage

  • Anonymous
    May 19, 2014
    Nice steps Thanks for your work

  • Anonymous
    June 13, 2014
    Nice blog..............

  • Anonymous
    July 17, 2014
    very good ,
    thanks

  • Anonymous
    July 22, 2014
    Good One... Thanks

  • Anonymous
    November 09, 2014
    Thanks Omar, you explained things very well

  • Anonymous
    February 08, 2015
    Sometime ago, I wrote a blog about upgrading from Windows 2003 based Active Directory to Windows 2008

  • Anonymous
    February 09, 2015
    always interesting
    Thanks

  • Anonymous
    February 09, 2015
    Exchange team has written below blog on the remote connectivity analyzer tests for mail flow testing

  • Anonymous
    February 09, 2015
    Exchange team has released a blog about Office 365 best practices analyzer for Exchange 2013 as below

  • Anonymous
    February 09, 2015
    Exchange team has written a blog about new Exchange Server deployment assistance as below:
    We’ve

  • Anonymous
    February 09, 2015
    After a long wait, the calculator is there. The calculator recommends mailbox and CAS sizing as well

  • Anonymous
    February 13, 2015
    Exchange team blogged about post TMG world. R ead the blog at http://blogs.technet.com/b/exchange/archive

  • Anonymous
    February 13, 2015
    Exchange team blogged about OffCAT as below:
    On Friday, July 19, the OffCAT team released OffCAT version

  • Anonymous
    February 13, 2015
    Read the blog at http://blogs.technet.com/b/exchange/archive/2013/07/16/owa-for-iphone-and-owa-for-ipad

  • Anonymous
    February 13, 2015
    Exchange team has released Hosting and Multi-Tenancy Guidance for Exchange Server 2013 document. It is

  • Anonymous
    February 13, 2015
    The Exchange team has released the following update rollups to the Download Center. All three releases

  • Anonymous
    February 13, 2015
    Exchange team has released a fantastic blog about publishing Exchange 2013 with TMG server.
    Review

  • Anonymous
    February 20, 2015
    Is there any chance to loose files or security system in the upgrading from 2003 to 2008?

  • Anonymous
    February 23, 2015
    Would also recommend instructions for moving FSMO roles in order to power off old DC.

  • Anonymous
    March 26, 2015
    Thank you. Just what I was looking for.

  • Anonymous
    April 23, 2015
    Nice doc..