CustomAttributeData.GetCustomAttributes Metódus

Definíció

Névtér:
System.Reflection
Szerelvények:
netstandard.dll, System.Runtime.dll
Szerelvény:
System.Reflection.dll
Szerelvény:
System.Runtime.dll
Szerelvény:
mscorlib.dll
Szerelvény:
netstandard.dll

Visszaadja a CustomAttributeData célra alkalmazott attribútumok adatait képviselő objektumok listáját.

Túlterhelések

Name Description
GetCustomAttributes(Assembly)

Visszaadja a CustomAttributeData célszerelvényre alkalmazott attribútumok adatait képviselő objektumok listáját.
GetCustomAttributes(MemberInfo)

Visszaadja a CustomAttributeData céltagra alkalmazott attribútumok adatait képviselő objektumok listáját.
GetCustomAttributes(Module)

A célmodulra alkalmazott attribútumokkal kapcsolatos adatokat képviselő objektumok listáját CustomAttributeData adja vissza.
GetCustomAttributes(ParameterInfo)

Visszaadja a CustomAttributeData célparaméterre alkalmazott attribútumok adatait képviselő objektumok listáját.

GetCustomAttributes(Assembly)

Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs

Visszaadja a CustomAttributeData célszerelvényre alkalmazott attribútumok adatait képviselő objektumok listáját.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Assembly ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.Assembly target);
static member GetCustomAttributes : System.Reflection.Assembly -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As Assembly) As IList(Of CustomAttributeData)

Paraméterek

target
Assembly

Az a szerelvény, amelynek egyéni attribútumadatait le kell kérni.

Válaszok

IList<CustomAttributeData>

A célszerelvényre alkalmazott attribútumokkal kapcsolatos adatokat megjelenítő objektumok listája.

Kivételek

ArgumentNullException

target az null.

Példák

Az alábbi példa egy négy konstruktort és négy tulajdonságot tartalmazó egyéni attribútumot határoz meg. A tulajdonságok közül kettő írásvédett, és a konstruktorok pozícióparamétereinek használatával van beállítva. A másik két tulajdonság az olvasás/írás, és csak névvel ellátott argumentumok használatával állítható be. Az egyik pozíciótulajdonság sztringek tömbje, egy elnevezett tulajdonság pedig egész számok tömbje.

Az attribútum a szerelvényre, a szerelvényben deklarált típusra, a típus metódusára és a metódus egy paraméterére lesz alkalmazva. Ezekhez az esetekhez különböző konstruktorok használhatók. A végrehajtáskor a szerelvény betölti magát a csak tükrözési környezetbe, és megjeleníti az egyéni attribútumokat.

A típusra alkalmazott attribútum a tömbtulajdonságokat mutatja be pozíció- és elnevezett argumentumokkal.

Ez GetCustomAttributes a metódus a szerelvényre alkalmazott egyéni attribútumok lekérésére szolgál Main() . A metódus visszatérési értéke a metódusnak lesz átadva ShowAttributeData .

using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/

Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Megjegyzések

Ez a módszer alternatívát kínál a GetCustomAttributes metódus helyett, amely mindig használható a Csak tükröződés kontextusban.

Lásd még

A következőre érvényes:

GetCustomAttributes(MemberInfo)

Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs

Visszaadja a CustomAttributeData céltagra alkalmazott attribútumok adatait képviselő objektumok listáját.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.MemberInfo target);
static member GetCustomAttributes : System.Reflection.MemberInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As MemberInfo) As IList(Of CustomAttributeData)

Paraméterek

target
MemberInfo

Az a tag, akinek az attribútumadatait le kell kérni.

Válaszok

IList<CustomAttributeData>

A céltagra alkalmazott attribútumokkal kapcsolatos adatokat megjelenítő objektumok listája.

Kivételek

ArgumentNullException

target az null.

Példák

Az alábbi példa egy négy konstruktort és négy tulajdonságot tartalmazó egyéni attribútumot határoz meg. A tulajdonságok közül kettő írásvédett, és a konstruktorok pozícióparamétereinek használatával van beállítva. A másik két tulajdonság az olvasás/írás, és csak névvel ellátott argumentumok használatával állítható be. Az egyik pozíciótulajdonság sztringek tömbje, egy elnevezett tulajdonság pedig egész számok tömbje.

Az attribútum a szerelvényre, a szerelvényben deklarált típusra, a típus metódusára és a metódus egy paraméterére lesz alkalmazva. Ezekhez az esetekhez különböző konstruktorok használhatók. A végrehajtáskor a szerelvény betölti magát a csak tükrözési környezetbe, és megjeleníti az egyéni attribútumokat.

A típusra alkalmazott attribútum a tömbtulajdonságokat mutatja be pozíció- és elnevezett argumentumokkal.

A GetCustomAttributes metódus a típusra és a tesztelési módszerre alkalmazott egyéni attribútumok lekérésére szolgál Main() (Typeszármazik).MemberInfo A visszaadott GetCustomAttributes érték a metódusnak ShowAttributeData lesz átadva.

using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/

Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Megjegyzések

Ez a metódus túlterheli a típusok, beágyazott típusok és típustagok egyéni attribútumadatait, mivel a Type típustagokat képviselő névtér osztálya System.Reflection és osztályai mind a következőből MemberInfoszármaznak.

Lásd még

A következőre érvényes:

GetCustomAttributes(Module)

Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs

A célmodulra alkalmazott attribútumokkal kapcsolatos adatokat képviselő objektumok listáját CustomAttributeData adja vissza.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Module ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.Module target);
static member GetCustomAttributes : System.Reflection.Module -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As Module) As IList(Of CustomAttributeData)

Paraméterek

target
Module

Az a modul, amelynek egyéni attribútumadatait le kell kérni.

Válaszok

IList<CustomAttributeData>

A célmodulra alkalmazott attribútumokkal kapcsolatos adatokat megjelenítő objektumok listája.

Kivételek

ArgumentNullException

target az null.

A következőre érvényes:

GetCustomAttributes(ParameterInfo)

Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs
Forrás:
CustomAttributeData.cs

Visszaadja a CustomAttributeData célparaméterre alkalmazott attribútumok adatait képviselő objektumok listáját.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::ParameterInfo ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.ParameterInfo target);
static member GetCustomAttributes : System.Reflection.ParameterInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As ParameterInfo) As IList(Of CustomAttributeData)

Paraméterek

target
ParameterInfo

Az a paraméter, amelynek attribútumadatait le kell kérni.

Válaszok

IList<CustomAttributeData>

A célparaméterre alkalmazott attribútumokkal kapcsolatos adatokat megjelenítő objektumok listája.

Kivételek

ArgumentNullException

target az null.

Példák

Az alábbi példa egy négy konstruktort és négy tulajdonságot tartalmazó egyéni attribútumot határoz meg. A tulajdonságok közül kettő írásvédett, és a konstruktorok pozícióparamétereinek használatával van beállítva. A másik két tulajdonság az olvasás/írás, és csak névvel ellátott argumentumok használatával állítható be. Az egyik pozíciótulajdonság sztringek tömbje, egy elnevezett tulajdonság pedig egész számok tömbje.

Az attribútum a szerelvényre, a szerelvényben deklarált típusra, a típus metódusára és a metódus egy paraméterére lesz alkalmazva. Ezekhez az esetekhez különböző konstruktorok használhatók. A végrehajtáskor a szerelvény betölti magát a csak tükrözési környezetbe, és megjeleníti az egyéni attribútumokat.

A típusra alkalmazott attribútum a tömbtulajdonságokat mutatja be pozíció- és elnevezett argumentumokkal.

A GetCustomAttributes metódus a tesztmetódus egy paraméterére alkalmazott egyéni attribútumok lekérésére szolgál Main() . A visszaadott GetCustomAttributes érték a metódusnak ShowAttributeData lesz átadva.

using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/

Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Megjegyzések

Ez a módszer alternatívát kínál a GetCustomAttributes metódus helyett, amely mindig használható a Csak tükröződés kontextusban.

Lásd még

A következőre érvényes: