Szerkesztés

Megosztás a következőn keresztül:


OpCodes.Blt Field

Definition

Transfers control to a target instruction if the first value is less than the second value.

public: static initonly System::Reflection::Emit::OpCode Blt;
public static readonly System.Reflection.Emit.OpCode Blt;
 staticval mutable Blt : System.Reflection.Emit.OpCode
Public Shared ReadOnly Blt As OpCode 

Field Value

Remarks

The following table lists the instruction's hexadecimal and Microsoft Intermediate Language (MSIL) assembly format, along with a brief reference summary:

Format Assembly Format Description
3F < int32 > blt target Branch to the target instruction at the specified offset if the first value is less than the second value.

The stack transitional behavior, in sequential order, is:

  1. value1 is pushed onto the stack.

  2. value2 is pushed onto the stack.

  3. value2 and value1 are popped from the stack; if value1 is less than value2, the branch operation is performed.

The blt instruction transfers control to the specified target instruction if value1 is less than or equal to value2. The effect is identical to performing a clt instruction followed by a brtrue branch to the specific target instruction. The target instruction is represented as a 4-byte signed offset from the beginning of the instruction following the current instruction.

If the target instruction has one or more prefix codes, control can only be transferred to the first of these prefixes. Control transfers into and out of try, catch, filter, and finally blocks cannot be performed by this instruction.

The following Emit method overload can use the blt opcode:

Applies to