Szerkesztés

Megosztás a következőn keresztül:

Deallocate (CPI-C)

  • Cikk

The Deallocate call (function name cmdeal) deallocates a conversation between two programs.

Syntax

  
CM_ENTRY Deallocate(   
  unsigned char FAR *conversation_ID,    
  CM_INT32 FAR *return_code              
);

Parameters

conversation_ID
Supplied parameter. Specifies the identifier for the conversation. The value of this parameter was returned by Initialize_Conversation or Accept_Conversation.

return_code
The code returned from this call. The valid return codes are listed later in this topic.

Return Codes

CM_OK
Primary return code; the call executed successfully; the conversation is deallocated.

CM_OPERATION_NOT_ACCEPTED
Primary return code; a previous operation on this conversation is incomplete.

CM_OPERATION_INCOMPLETE
Primary return code; the operation has not completed (processing mode is nonblocking only) and is still in progress. The program can issue Wait_For_Conversation to await the completion of the operation, or Cancel_Conversation to cancel the operation and conversation. If Specify_Windows_Handle has been called, the application should wait for notification by a Microsoft® Windows® message and not call Wait_For_Conversation.

CM_PROGRAM_PARAMETER_CHECK
Primary return code; the value specified by conversation_ID is invalid.

CM_PROGRAM_STATE_CHECK
Primary return code; the following state errors can occur when the deallocate type indicates a normal deallocation (CM_DEALLOCATE_SYNC_LEVEL, CM_DEALLOCATE_FLUSH, CM_DEALLOCATE_CONFIRM):

  • The conversation is not in SEND or SEND_PENDING state.

  • For a basic conversation, the conversation is in SEND state, but the program did not finish sending a logical record.

    The following return codes can be returned when the deallocate_type is set to CM_DEALLOCATE_CONFIRM or to CM_DEALLOCATE_SYNC_LEVEL and the conversations synchronization level is set to CM_CONFIRM.

    CM_PRODUCT_SPECIFIC_ERROR
    Primary return code; a product-specific error occurred and has been logged in the products error log.

    CM_CONVERSATION_TYPE_MISMATCH
    Primary return code; the partner logical unit (LU) or program does not support the conversation type (basic or mapped) specified in the allocation request.

    CM_PIP_NOT_SPECIFIED_CORRECTLY
    Primary return code; the allocation request was rejected by a non-CPI-C LU 6.2 transaction program (TP). The partner program requires one or more PIP data variables, which are not supported by CPI-C.

    CM_SECURITY_NOT_VALID
    Primary return code; the user identifier or password specified in the allocation request was not accepted by the partner LU.

    CM_SYNC LEVEL_NOT_SUPPORTED_PGM
    Primary return code; the partner program does not support the synchronization level specified in the allocation request.

    CM_TPN_NOT_RECOGNIZED
    Primary return code; the partner LU does not recognize the program name specified in the allocation request.

    CM_TP_NOT_AVAILABLE_NO_RETRY
    Primary return code; the partner LU cannot start the program specified in the allocation request because of a permanent condition. The reason for the error may be logged on the remote node. Do not retry the allocation until the error has been corrected.

    CM_TP_NOT_AVAILABLE_RETRY
    Primary return code; the partner LU cannot start the program specified in the allocation request because of a temporary condition. The reason for the error may be logged on the remote node. Retry the allocation.

    CM_PROGRAM_ERROR_PURGING
    Primary return code; one of the following occurred:

  • While in RECEIVE or CONFIRM state, the partner program issued Send_Error. Data sent but not yet received is purged.

  • While in SEND_PENDING state with the error direction set to CM_RECEIVE_ERROR, the partner program issued Send_Error. Data was not purged.

    CM_RESOURCE_FAILURE_NO_RETRY
    Primary return code; one of the following occurred:

  • The conversation was terminated prematurely because of a permanent condition. Do not retry until the error has been corrected.

  • The partner program did not deallocate the conversation before terminating normally.

    CM_RESOURCE_FAILURE_RETRY
    Primary return code; the conversation was terminated prematurely because of a temporary condition, such as modem failure. Retry the conversation.

    CM_DEALLOCATED_ABEND
    Primary return code; the conversation has been deallocated for one of the following reasons:

  • The remote program issued Deallocate with the type parameter set to CM_DEALLOCATE_ABEND, or the remote LU did so because of a remote program abnormal-ending condition. If the conversation for the remote program was in RECEIVE state when the call was issued, information sent by the local program and not yet received by the remote program is purged.

  • The remote TP terminated normally but did not deallocate the conversation before terminating. Node services at the remote LU deallocated the conversation on behalf of the remote TP.

    CM_DEALLOCATED_ABEND_SVC
    Primary return code; the conversation has been deallocated for one of the following reasons:

  • The partner program issued Deallocate with the type parameter set to ABEND_SVC.

  • The partner program did not deallocate the conversation before terminating.

    If the conversation is in RECEIVE state for the partner program when this call is issued by the local program, data sent by the local program and not yet received by the partner program is purged.

    CM_DEALLOCATED_ABEND_TIMER
    Primary return code; the conversation has been deallocated because the partner program issued Deallocate with the type parameter set to ABEND_TIMER. If the conversation is in RECEIVE state for the partner program when this call is issued by the local program, data sent by the local program and not yet received by the partner program is purged.

    CM_SVC_ERROR_PURGING
    Primary return code; while in SEND state, the partner program or partner LU issued Send_Error with the type parameter set to SVC. Data sent to the partner program may have been purged.

    State Changes

    Depending on the value of the conversations deallocate type parameter (set by Set_Deallocate_Type), the conversation can be in one of the states indicated in the following table when the program issues Deallocate:

Deallocate type Allowed state
CM_DEALLOCATE_FLUSH SEND or SEND_PENDING
CM_DEALLOCATE_CONFIRM SEND or SEND_PENDING
CM_DEALLOCATE_SYNC_LEVEL SEND or SEND_PENDING
CM_DEALLOCATE_ABEND Any except RESET

State changes, summarized in the following table, are based on the value of the return_code parameter.

return_code New state
CM_OK RESET
CM_PROGRAM_ERROR_PURGING RECEIVE
CM_SVC_ERROR_PURGING RECEIVE
CM_CONVERSATION_TYPE_MISMATCH RESET
CM_PIP_NOT_SPECIFIED_CORRECTLY RESET
CM_SECURITY_NOT_VALID RESET
CM_SYNC_LEVEL_NOT_SUPPORTED_PGM RESET
CM_TPN_NOT_RECOGNIZED RESET
CM_TP_NOT_AVAILABLE_NO_RETRY RESET
CM_TP_NOT_AVAILABLE_RETRY RESET
CM_RESOURCE_FAILURE_NO_RETRY RESET
CM_RESOURCE_FAILURE_RETRY RESET
CM_DEALLOCATED_ABEND RESET
CM_DEALLOCATED_ABEND_SVC RESET
CM_DEALLOCATED_ABEND_TIMER RESET
All others No change

Remarks

Before deallocating the conversation, this call performs the equivalent of either the Flush or Confirmed call, depending on the current conversation synchronization level and deallocate type. The deallocate type is set by Set_Deallocate_Type.

The partner program receives the deallocation notification through one of the following parameters:

  • status_received is CM_CONFIRM_DEALLOC_RECEIVED

  • return_code is CM_DEALLOCATED_NORMAL

  • return_code is CM_DEALLOCATED_ABEND

    After this call has successfully executed, the conversation_ID is no longer valid.

    For a basic conversation, if the conversations deallocate type is set to CM_DEALLOCATE_ABEND and the log data length is greater than zero, the local LU writes the log data (specified by Set_Log_Data) to the local error log and to the partner LU.

    After Deallocate has been executed, the log data length is set to zero and the log data is set to null.