MC_RECEIVE_AND_POST

The MC_RECEIVE_AND_POST verb receives application data and status information asynchronously. This allows the local transaction program (TP) to proceed with processing while data is still arriving at the local logical unit (LU).

While an asynchronous MC_RECEIVE_AND_POST is outstanding, the following verbs can be issued on the same conversation:

• GET_TYPE

• MC_GET_ATTRIBUTES

• MC_REQUEST_TO_SEND

• MC_SEND_ERROR

• MC_TEST_RTS

• TP_ENDED

  This allows an application to use an asynchronous MC_RECEIVE_AND_POST to receive data. While the MC_RECEIVE_AND_POST is outstanding, it can still use MC_SEND_ERROR and REQUEST_TO_SEND. It is recommended that you use this feature for full asynchronous support. For information on how a TP receives data and how to use this verb, see Remarks in this topic.

  The following structure describes the verb control block (VCB) used by the MC_RECEIVE_AND_POST verb.

Syntax

  
struct mc_receive_and_post {  
    unsigned short      opcode;  
    unsigned char       opext;  
    unsigned char       reserv2;  
    unsigned short      primary_rc;  
    unsigned long       secondary_rc;  
    unsigned char       tp_id[8];  
    unsigned long       conv_id;  
    unsigned short      what_rcvd;  
    unsigned char       rtn_status;  
    unsigned char       reserv4;  
    unsigned char       rts_rcvd;  
    unsigned char       reserv5;  
    unsigned short      max_len;  
    unsigned short      dlen;  
    unsigned char FAR * dptr;  
    unsigned char FAR * sema;  
    unsigned char       reserv6;  
};   

Members

opcode
Supplied parameter. Specifies the verb operation code, AP_M_RECEIVE_AND_POST.

opext
Supplied parameter. Specifies the verb operation extension, AP_MAPPED_CONVERSATION.

reserv2
A reserved field.

primary_rc
Returned parameter. Specifies the primary return code set by APPC at the completion of the verb. The valid return codes vary depending on the APPC verb issued. See Return Codes for valid error codes for this verb.

secondary_rc
Returned parameter. Specifies the secondary return code set by APPC at the completion of the verb. The valid return codes vary depending on the APPC verb issued. See Return Codes for valid error codes for this verb.

tp_id
Supplied parameter. Identifies the local TP. The value of this parameter is returned by TP_STARTED in the invoking TP or byRECEIVE_ALLOCATE in the invoked TP.

conv_id
Supplied parameter. Provides the conversation identifier. The value of this parameter is returned by MC_ALLOCATE in the invoking TP or by RECEIVE_ALLOCATE in the invoked TP.

what_rcvd
Returned parameter. Indicates whether data or conversation status was received.

• AP_CONFIRM_DEALLOCATE indicates that the partner TP issued MC_DEALLOCATE with dealloc_type set to AP_SYNC_LEVEL. The conversation's synchronization level, established by MC_ALLOCATE, is AP_CONFIRM_SYNC_LEVEL. Upon receiving this value, the local TP normally issues MC_CONFIRMED.

• AP_CONFIRM_SEND indicates that the partner TP issued MC_PREPARE_TO_RECEIVE with ptr_type set to AP_SYNC_LEVEL. The conversation's synchronization level, established by MC_ALLOCATE, is AP_CONFIRM_SYNC_LEVEL. Upon receiving this value, the local TP normally issues MC_CONFIRMED, and begins to send data.

• AP_CONFIRM_WHAT_RECEIVED indicates that the partner TP issued MC_CONFIRM. Upon receiving this value, the local TP normally issues MC_CONFIRMED.

• AP_DATA_COMPLETE indicates, for MC_RECEIVE_AND_POST, that the local TP has received a complete data record or the last part of a data record. Upon receiving this value, the local TP normally reissues MC_RECEIVE_AND_POST or issues another receive verb. If the partner TP has sent more data, the local TP begins to receive a new unit of data. Otherwise, the local TP examines status information.

  If primary_rc contains AP_OK and what_rcvd contains AP_SEND, AP_CONFIRM_SEND, AP_CONFIRM_DEALLOCATE, or AP_CONFIRM_WHAT_RECEIVED, see the description of the value (in this section) for the next action the local TP normally takes.

  If primary_rc contains AP_DEALLOC_NORMAL, the conversation has been deallocated in response to the MC_DEALLOCATE issued by the partner TP.

• AP_DATA_INCOMPLETE indicates, for MC_RECEIVE_AND_POST, that the local TP has received an incomplete data record. The max_len parameter specified a value less than the length of the data record (or less than the remainder of the data record if this is not the first receive verb to read the record). Upon receiving this value, the local TP normally reissues MC_RECEIVE_AND_POST (or issues another receive verb) to receive the next part of the record.

• AP_NONE indicates that the TP did not receive data or conversation status indicators.

• AP_SEND indicates, for the partner TP, that the conversation has entered RECEIVE state. For the local TP, the conversation is now in SEND state. Upon receiving this value, the local TP normally uses MC_SEND_DATA to begin sending data.

  rtn_status
  Supplied parameter. Indicates whether both data and conversation status indicators should be returned within one API call.

• AP_NO specifies that indicators should be returned individually on separate invocations of the verb.

• AP_YES specifies that indicators should be returned together, provided both are available. Both can be returned when:

  The receive buffer is large enough to hold all of the data that precedes the status indicator.

  The data is the last data record before the status indicator.

  rts_rcvd
  Returned parameter. Indicates whether the partner TP issued MC_REQUEST_TO_SEND.

• AP_YES indicates that the partner TP issued MC_REQUEST_TO_SEND, which requests that the local TP change the conversation to RECEIVE state.

• AP_NO indicates that the partner TP has not issued MC_REQUEST_TO_SEND.

  Max_len
  Supplied parameter. Specifies the maximum number of bytes of data the local TP can receive. The range is from 0 through 65535.

  The value must not exceed the length of the buffer to contain the received data. The offset of dptr plus the value of max_len must not exceed the size of the data segment.

  dlen
  Returned parameter. Specifies the number of bytes of data received. Data is stored in the buffer specified by dptr. A length of zero indicates that no data was received.

  dptr
  Supplied parameter. Provides the address of the buffer to contain the data received by the local LU.

  For the Microsoft Windows operating system, the data buffer can reside in a static data area or in a globally allocated area. The data buffer must fit entirely within this area.

  For the OS/2 operating system, the data buffer must reside on an unnamed, shared segment, which is allocated by the DosAllocSeg function with Flags equal to 1. The data buffer must fit entirely on the data segment.

  sema
  Supplied parameter. Provides the address of the semaphore that APPC is to clear when the asynchronous receiving operation is finished. The sema parameter is an event handle obtained by calling either the CreateEvent or OpenEvent Win32 function.

Return Codes

AP_OK
Primary return code; the verb executed successfully.

When rtn_status is AP_YES, the preceding return code or one of the following return codes can be returned.

AP_DATA_COMPLETE_SEND

Primary return code; this is a combination of AP_DATA_COMPLETE and AP_SEND.

AP_DATA_COMPLETE_CONFIRM_SEND

Primary return code; this is a combination of AP_DATA_COMPLETE and AP_CONFIRM_SEND.

AP_DATA_COMPLETE_CONFIRM

Primary return code; this is a combination of AP_DATA_COMPLETE and AP_CONFIRM_WHAT_RECEIVED.

AP_DATA_COMPLETE_CONFIRM_DEALL

Primary return code; this is a combination of AP_DATA_COMPLETE and AP_CONFIRM_DEALLOCATE.

AP_DEALLOC_NORMAL
Primary return code; the partner TP issued MC_DEALLOCATE with dealloc_type set to AP_FLUSH or AP_SYNC_LEVEL with the synchronization level of the conversation specified as AP_NONE.

If rtn_status is AP_YES, examine what_rcvd also.

AP_PARAMETER_CHECK
Primary return code; the verb did not execute because of a parameter error.

AP_BAD_CONV_ID

Secondary return code; the value of conv_id did not match a conversation identifier assigned by APPC.

AP_BAD_TP_ID

Secondary return code; the value of tp_id did not match a TP identifier assigned by APPC.

AP_BAD_RETURN_STATUS_WITH_DATA

Secondary return code; the specified rtn_status value was not recognized by APPC.

AP_INVALID_DATA_SEGMENT

Secondary return code; the length specified for the data buffer was longer than the segment allocated to contain the buffer.

AP_INVALID_SEMAPHORE_HANDLE

Secondary return code; the address of the RAM semaphore or system semaphore handle was invalid.

Note

APPC cannot trap all invalid semaphore handles. If the TP passes a bad RAM semaphore handle, a protection violation results.

AP_STATE_CHECK
Primary return code; the verb did not execute because it was issued in an invalid state.

AP_RCV_AND_POST_BAD_STATE

Secondary return code; the conversation was not in RECEIVE or SEND state when the TP issued this verb.

AP_RCV_AND_POST_NOT_LL_BDY

Secondary return code; the conversation was in SEND state; the TP began but did not finish sending a logical record.

AP_CANCELED
Primary return code; the local TP issued one of the following verbs, which canceled MC_RECEIVE_AND_POST:

MC_DEALLOCATE with dealloc_type set to AP_ABEND

MC_SEND_ERROR

TP_ENDED

Issuing one of these verbs causes the semaphore to be cleared.

AP_ALLOCATION_ERROR
Primary return code; APPC has failed to allocate a conversation. The conversation state is set to RESET.

This code can be returned through a verb issued after MC_ALLOCATE.

AP_ALLOCATION_FAILURE_NO_RETRY

Secondary return code; the conversation cannot be allocated because of a permanent condition, such as a configuration error or session protocol error. To determine the error, the system administrator should examine the error log file. Do not retry the allocation until the error has been corrected.

AP_ALLOCATION_FAILURE_RETRY

Secondary return code; the conversation could not be allocated because of a temporary condition, such as a link failure. The reason for the failure is logged in the system error log. Retry the allocation.

AP_CONVERSATION_TYPE_MISMATCH

Secondary return code; the partner LU or TP does not support the conversation type (basic or mapped) specified in the allocation request.

AP_PIP_NOT_ALLOWED

Secondary return code; the allocation request specified PIP data, but either the partner TP does not require this data, or the partner LU does not support it.

AP_PIP_NOT_SPECIFIED_CORRECTLY

Secondary return code; the partner TP requires PIP data, but the allocation request specified either no PIP data or an incorrect number of parameters.

AP_SECURITY_NOT_VALID

Secondary return code; the user identifier or password specified in the allocation request was not accepted by the partner LU.

AP_SYNC_LEVEL_NOT_SUPPORTED

Secondary return code; the partner TP does not support the sync_level (AP_NONE or AP_CONFIRM_SYNC_LEVEL) specified in the allocation request, or the sync_level was not recognized.

AP_TP_NAME_NOT_RECOGNIZED

Secondary return code; the partner LU does not recognize the TP name specified in the allocation request.

AP_TRANS_PGM_NOT_AVAIL_NO_RETRY

Secondary return code; the remote LU rejected the allocation request because it was unable to start the requested partner TP. The condition is permanent. The reason for the error may be logged on the remote node. Do not retry the allocation until the error has been corrected.

AP_TRANS_PGM_NOT_AVAIL_RETRY

Secondary return code; the remote LU rejected the allocation request because it was unable to start the requested partner TP. The condition may be temporary, such as a time-out. The reason for the error may be logged on the remote node. Retry the allocation.

AP_COMM_SUBSYSTEM_ABENDED
Primary return code; indicates one of the following conditions:

• The node used by this conversation encountered an ABEND.

• The connection between the TP and the PU 2.1 node has been broken (a LAN error).

• The SnaBase at the TP's computer encountered an ABEND.

  The system administrator should examine the error log to determine the reason for the ABEND.

  AP_CONV_FAILURE_NO_RETRY
  Primary return code; the conversation was terminated because of a permanent condition, such as a session protocol error. The system administrator should examine the system error log to determine the cause of the error. Do not retry the conversation until the error has been corrected.

  AP_CONV_FAILURE_RETRY
  Primary return code; the conversation was terminated because of a temporary error. Restart the TP to see if the problem occurs again. If it does, the system administrator should examine the error log to determine the cause of the error.

  AP_CONVERSATION_TYPE_MIXED
  Primary return code; the TP has issued both basic and mapped conversation verbs. Only one type can be issued in a single conversation.

  AP_INVALID_VERB_SEGMENT
  Primary return code; the VCB extended beyond the end of the data segment.

  AP_PROG_ERROR_NO_TRUNC
  Primary return code; the partner TP issued MC_SEND_ERROR while the conversation was in SEND state. Data was not truncated.

  AP_PROG_ERROR_PURGING
  Primary return code; while in RECEIVE, PENDING, PENDING_POST, CONFIRM, CONFIRM_SEND, or CONFIRM_DEALLOCATE state, the partner TP issued MC_SEND_ERROR. Data sent but not yet received is purged.

  AP_STACK_TOO_SMALL
  Primary return code; the stack size of the application is too small to execute the verb. Increase the stack size of your application.

  AP_CONV_BUSY
  Primary return code; there can only be one outstanding conversation verb at a time on any conversation. This can occur if the local TP has multiple threads, and more than one thread is issuing APPC calls using the same conv_id.

  AP_UNEXPECTED_DOS_ERROR
  Primary return code; the operating system has returned an error to APPC while processing an APPC call from the local TP. The operating system return code is returned through the secondary_rc. It appears in Intel byte-swapped order. If the problem persists, consult the system administrator.

  AP_DEALLOC_ABEND
  Primary return code; the conversation has been deallocated for one of the following reasons:

• The partner TP issued MC_DEALLOCATE with dealloc_type set to AP_ABEND.

• The partner TP encountered an ABEND, causing the partner LU to send an MC_DEALLOCATE request.

Remarks

The local TP receives data through the following process:

1. The local TP issues a receive verb until it finishes receiving a complete unit of data. The data received is one data record.

   The local TP may need to issue the receive verb several times in order to receive a complete unit of data. After a complete unit of data has been received, the local TP can manipulate it. The receive verbs are MC_RECEIVE_AND_POST, MC_RECEIVE_AND_WAIT, and MC_RECEIVE_IMMEDIATE.

2. The local TP issues the receive verb again. This has one of the following effects:

   • If the partner TP has sent more data, the local TP begins to receive a new unit of data.

   • If the partner TP has finished sending data or is waiting for confirmation, status information (available through what_rcvd) indicates the next action the local TP normally takes.

   The following procedure shows tasks performed by the local TP in using MC_RECEIVE_AND_POST.

To use MC_RECEIVE_AND_POST

1. For the Windows operating system, the TP retrieves the WinAsyncAPPC message number by calling the RegisterWindowMessage API or allocating a semaphore. The sema field should be set to NULL if the application expects to be notified through the Windows message mechanism.

   APPC sends the Windows message or clears the semaphore when the local TP finishes receiving data.

   For the OS/2 operating system, the TP uses the DosSemSet function to set the semaphore pointed to by sema.

   The semaphore will remain set while the local TP receives data asynchronously. APPC will clear the semaphore when the local TP finishes receiving data.

2. The TP issues MC_RECEIVE_AND_POST.

3. The TP checks the value of primary_rc.

   If primary_rc is AP_OK, the receive buffer (pointed to by dptr) is asynchronously receiving data from the partner TP. While receiving data asynchronously, the local TP can:

   • Perform tasks not related to this conversation.

   • Issue MC_REQUEST_TO_SEND.

   • Gather information about this conversation by issuing GET_TYPE, MC_GET_ATTRIBUTES, or MC_TEST_RTS.

   • Prematurely cancel MC_RECEIVE_AND_POST by issuing MC_DEALLOCATE with dealloc_type set to AP_ABEND; MC_SEND_ERROR; or TP_ENDED.

     If, however, primary_rc is not AP_OK, MC_RECEIVE_AND_POST has failed. In this case, the local TP does not perform the next two tasks.

4. For the Windows operating system, when the TP finishes receiving data asynchronously, APPC issues the WinAsyncAPPC Windows message or clears the semaphore.

   For the OS/2 operating system, the TP uses the DosSemWait function to wait for APPC to clear the semaphore pointed to by sema. When the TP finishes receiving data asynchronously, APPC clears the semaphore. To prevent the local TP from waiting, have it test the semaphore (invoking DosSemWait with Timeout set to zero) until APPC clears the semaphore.

5. The TP checks the new value of primary_rc.

   If primary_rc is AP_OK, the local TP can examine the other returned parameters and manipulate the asynchronously received data.

   If primary_rc is not AP_OK, only secondary_rc and rts_rcvd (request-to-send received) are meaningful.

   Conversation State Effects

   The conversation must be in RECEIVE or SEND state when the TP issues this verb.

   Issuing MC_RECEIVE_AND_POST while the conversation is in SEND state has the following effects:

• The local LU sends the information in its send buffer and a SEND indicator to the partner TP.

• The conversation changes to PENDING_POST state; the local TP is ready to receive information from the partner TP asynchronously.

  The conversation changes states twice:

• Upon initial return of the verb, if primary_rc contains AP_OK, the conversation changes to PENDING_POST state.

• After completion of the verb, the state changes depending on the value of the following:

  The primary_rc parameter

  The what_rcvd parameter if primary_rc is AP_OK

  The following table shows the new state associated with each value of what_rcvd when primary_rc is AP_OK.

what_rcvd	New state
AP_CONFIRM_DEALLOCATE	CONFIRM_DEALLOCATE
AP_DATA_COMPLETE_CONFIRM_DEALL	CONFIRM_DEALLOCATE
AP_DATA_CONFIRM_DEALLOCATE	CONFIRM_DEALLOCATE
AP_CONFIRM_SEND	CONFIRM_SEND
AP_DATA_COMPLETE_CONFIRM_SEND	CONFIRM_SEND
AP_DATA_CONFIRM_SEND	CONFIRM_SEND
AP_CONFIRM_WHAT_RECEIVED	CONFIRM
AP_DATA_COMPLETE_CONFIRM	CONFIRM
AP_DATA_CONFIRM	CONFIRM
AP_DATA	RECEIVE
AP_DATA_COMPLETE	RECEIVE
AP_DATA_INCOMPLETE	RECEIVE
AP_SEND	SEND
AP_DATA_COMPLETE_SEND	SEND_PENDING

The following table shows the new state associated with each value of primary_rc other than AP_OK.

primary_rc	New state
AP_CANCELED	No change
AP_CONV_FAILURE_RETRY	RESET
AP_CONV_FAILURE_NO_RETRY	RESET
AP_DEALLOC_ABEND	RESET
AP_DEALLOC_ABEND_PROG	RESET
AP_DEALLOC_ABEND_SVC	RESET
AP_DEALLOC_ABEND_TIMER	RESET
AP_DEALLOC_NORMAL	RESET
AP_PROG_ERROR_PURGING	RECEIVE
AP_PROG_ERROR_NO_TRUNC	RECEIVE
AP_SVC_ERROR_PURGING	RECEIVE
AP_SVC_ERROR_NO_TRUNC	RECEIVE
AP_PROG_ERROR_TRUNC	RECEIVE
AP_SVC_ERROR_TRUNC	RECEIVE