Szerkesztés

Megosztás a következőn keresztül:

Session Integrator for TN3270

  • Cikk

Session Integrator can be used to interact with TN3270 sessions. The behavior for Session Integrator using the TN3270 protocol is the same as Session Integrator for LU2 except for a different connection setting.

Connection string for TN3270 sessions

Transport – TN3270 – Indicates that Session Integrator should use the TN3270 protocol.

TN3270SERVER – The IP address or IP Host name of the TN3270 server.

TN3270PORT – The IP port on which the TN3270 server is listening.

The typical ports would be port 23 for non-SSL and port 992 for SSL/TLS.

DEVICETYPE – Indicates the 3270 terminal type to be emulated. The typical value would be IBM-3278-2.

SECURITY - Indicates the type of security used for the connection.

  • NONE- The connection is not encrypted.

  • TLS1- The connection negotiates encryption using TLS v1.0.

    CERTIFICATECHECK – Indicates how the certificate is verified if security is set to TLS1.

  • NONE- The data is encrypted, but the server certificate is not verified.

  • VERIFIED- The server certificate will be verified by the Schannel security support provider during the TLS negotiation.

m_Handler.Connect("TRANSPORT=TN3270;TN3270SERVER=SYS1;TN3270Port=23;DeviceType=IBM-3278-2;SECURITY=TLS1;CERTIFICATECHECK=VERIFIED”);

SessionConnectionDisplay

Security [enum] – Indicates the type of security used for the connection.

  • TNSecurity.None- The connection is not encrypted.

  • TNSecurity.TLS1- The connection negotiates encryption using TLS v1.0.

    CertificateCheck [enum] - Indicates how the certificate is verified if security is set to TLS1.

  • TNCertificateCheck .None-The data is encrypted, but the server certificate is not verified.

  • TNCertificateCheck .Verified-The server certificate will be verified by the Schannel security support provider during the TLS negotiation.

See Also

Working with Session Integrator